Pečica na vroč zrak

Compactsystem MARTINA 30-15

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² Klsdpfsvz Hq Hox Al Nor - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: dober (rabljeno), 926 RABLJENA trgovska, slaščičarska, polična, električna peč. Dvokomorna peč za pladnje 60x40, opremljena s polico za pladnje. TEHNIČNI PODATKI - število pekaških komor: 2 - vsaka komora ima funkcijo pare, - opremljena z: vzhajalnikom, polico za pladnje in napo. Kodeuiwvkjpfx Al Nelr ZUNANJE DIMENZIJE (v cm) - širina: 97, - dolžina: 100, - višina: 190 (z napo 216) DIMENZIJE KOMORE (v cm) - 60x47x16 (za 1 pladenj 60x40) Naprava pripravljena za ogled se nahaja v našem skladišču (36-068 Bachórz, Poljska). Plačljive možnosti: prevoz / montaža / zagon. Navedena cena je neto. GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOZKO, RUSKO, UKRAJINSKO.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Odpiranje: 1000 x 800 mm Premer rotorja: 200 mm Število nožev: 18 kosov trapeznih (40 x 40 mm) Moč motorja: 15 kW Premer odprtin sita: Ø 20 mm Dimenzije stroja: D 2100 x Š 1500 x V 1800 mm Približna teža: 2000 kg Kedpfx Aolkdclel Nelr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Viesmann Vitoplex 100 LS with Weishaupt WM - G10/4A Kedpfxjtrl Sks Al Nelr

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm Kedsvz Hq Tepfx Al Nslr - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: dober (rabljeno), Kliklok Concorde K170 kartonirka v odličnem stanju. Prihaja iz velike britanske živilske tovarne, zato je bila zelo dobro vzdrževana. Na voljo je lahko več menjavnih (formatnih) delov za to napravo. Kodonmv N Sopfx Al Nelr

Stanje: rabljeno, Leto izdelave: 1994, Kolesni nakladač 541 v zelo dobrem stanju Tako vizualno kot tehnično Z malo delovnih ur, približno 8700 ur Brez izgube olja Vse deluje Vključen prevoz po celotni Nemčiji Možne so napake Slike/besedilo se lahko razlikujejo Kljdpfsufw Apox Al Nor

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 14.367 h, hod: 445 mm, globina grla: 420 mm, potovalna razdalja osi X: 860 mm, model krmilnika: TASC 6000, delovna širina: 4.420 mm, upogibna sila (maks.): 320 t, razdalja med stojali: 3.680 mm, vgradna višina: 615 mm, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, nastavitev zadnjega prislona: CNC krmiljen, število osi: 6, tip kronanja: CNC krmiljen, vrsta aktuacije: hidravlični, Oprema: CE označba, dokumentacija / priročnik, nožno daljinsko upravljanje, sistem za merjenje kota, varnostna svetlobna zapora, TruBend Cell 5000 – Robotic Bending Cell 320t Uninterrupted Service History - 6-axis backgauge system with control cabinet air conditioning - Sensors for 6-axis backgauge - Hydraulic upper tool clamping - CNC crowning system - Prepared for AСВ - MobileControl - Rear work area lighting - Front work area lighting - Comfort control: screen, mouse, keyboard - BendGuard - BendMaster 150 Klodoylankspfx Al Njr - Track extension 16,000 mm - NC grip-change station - Double sheet detection - Right side door for safety fence - Vacuum gripper - 3x pneumatic gripper couplings - Heavy-duty all-steel machine frame - Pressure beam stress-relief annealed - 4-cylinder upper drive - Block hydraulic system with low-noise dual pump - Backgauge with CNC-controlled X and R axes - Hydraulic upper tool clamping - Hydraulic lower tool clamping - Control cabinet cooling via air-to-air heat exchanger - Network connection for machine control Control system - TRUMPF TASC 6000 Safety - Standard safety equipment

Leto izdelave: 2007, stanje: zelo dobro (rabljeno), 704 RABLJENA električna peč Wachtel Piccolo. ZUNANJE MERE (v cm): - širina 117, - globina 155, - višina 226, MERE KOMORE (v cm): - širina 80, - globina 67. OPREMA: - 3 komore - napa - parjenje vsake komore Naprava je pripravljena za ogled v našem skladišču (36-068 Bachórz, Poljska). Na voljo so plačljive možnosti: obnova / prevoz / montaža / zagon. Naveden je neto znesek cene. Klodpjrdvnnsfx Al Ner GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOŠKO, RUSKO IN UKRAJINSKO.

Stanje: rabljeno, skupna dolžina: 1.650 mm, skupna višina: 3.380 mm, skupna širina: 2.600 mm, - Dokumentacija na voljo: Ne - CE-certifikat na voljo: Ne Kljdpfx Aljwf El Aj Nor - Glavna moč motorja [kW]: 11 - Število osi [kos]: 1 - Hidravlični drsnik: Da - Širina odprtine [mm]: 1000 - Dolžina odprtine [mm]: 1200 - Transportne mere: 1650mm x 2600mm x 3380mm (d x š x v) Finančne informacije DDV: Navedena cena je brez DDV DDV/obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vse iz industrijskega področja Yorick Diebels