Compactsystem Martina 30-15 nakup rabljenega (36.864)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. Codpsvz Hqtofx Aplerb The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg Credpfxsvz Hqme Aplsb - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: dober (rabljeno), Bandall BA 24/15-30 stroja za trakovanje Eden najbolj prepoznavnih strojev za trakovanje na svetu, vodilni na trgu. Proizvajalec Bandall, Nizozemska. Stroj v zelo dobrem stanju, nedavno servisiran. Leto izdelave: 2016 Stroj deluje v ročnem ali avtomatskem načinu. Cedpfeyurznox Aplorb Proizvodna verzija, primerna za težke tovore. Stroj je nameščen na samostojnem ogrodju s kolesi za transport. Deluje na jumbo role. Po vstavljanju materiala stroj obda s trakom, stisne in zatesni, kar ustvari eleganten paket. Idealen za zavijanje vizitk, letakov in drugih materialov. Upravljanje preko LCD panela. Tehnične specifikacije: Širina traku: 30 mm Kapaciteta: 36 ciklov/min Dimenzija odprtine stroja: 320 x 160 mm Priložen je filmski rol.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm Codpovz Hq Tefx Aplorb - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. Crodpfxjvz Hq Hs Aplsb The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Cjdpsvz Hqyjfx Apljrb Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm Cjdpsvz Hqgjfx Aplsrb - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar Csdpfxovz Hhxj Apljrb - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.

Stanje: dober (rabljeno), Leto izdelave: 1993, Pritisk: 150 t Dolžina upogibanja: 3550 mm Razmak med stebri: 3050 mm Krmiljenje: Cybelec DNC 880S Hod: 700 mm Globina grla: 350 mm Približna masa stroja: ca. 15.000 kg Višina stroja: 3.900 mm Dodatna oprema/oprema: Crodpfegz S S Sox Aplsb - Pomoč pri upogibanju pred strojem - Parkirni prostor za pomoč pri upogibanju - 3 kosi omejevalnih prstov

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, KRAFT FB-15/20/25/30 Facing Lathe, brand new · 1500-3000 mm faceplate · CNC or conventional BRAND NEW KRAFT FB SERIES FACING LATHE — FOR LARGE FACEPLATE WORKPIECES, FLOATING UP TO 2 TONS The KRAFT FB series offers cost-effective machining of large, flat components such as brake discs, flanges, wheels, bearing rings, or drum parts. Four model sizes with swing diameters from 1,500 to 3,000 mm and floating workpiece weights up to 2 tons cover everything from single-item to medium batch production. Available as conventional or CNC versions (Siemens, Fanuc or Fagor), with or without tailstock, and with bed orientation longitudinal or transverse. KEY FEATURES Heavy-duty construction - Machine bed made from solid MEHANITE cast iron, one-piece, bed width 450 mm, heavily ribbed - Hardened bed guideways, stress-relieved guaranties long-term, high-precision operation with zero distortion High-precision main spindle — Accuracy class G1 - Induction-hardened, spindle bore up to 230 mm (optional) - Spindle head in compact design, large transverse ribs Powerful drive - Spindle motor 22 kW (optional 29 kW), up to 600 rpm, high torque - Stepless spindle speed as standard CNC-Ready from factory - X/Z servo motors from Fanuc or Siemens - Ball screws: X: Ø25 P5 C3, Z: Ø40 P10 C5 - Rapid traverse X/Z: 6/8 m/min Floating workpiece machining — facing lathe advantage - Workpieces clamped directly to spindle head, without tailstock - Optimal for flat, disc-shaped parts with large diameters OPTIONS CNC Siemens/Fanuc/Fagor · constant cutting speed · PARAT tool holder · C-axis + driven tools/milling unit · tailstock · spindle bore Ø 230 mm · spindle motor 29 kW MACHINE DATA — FOUR SIZES KRAFT FB-15 - Swing/faceplate: 1,500 mm - Spindle speed: 4–600 rpm - Z-axis travel: 1,000 mm - Servo motors X/Z: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,000 kg, dimensions: 2200 × 2200 × 2500 mm KRAFT FB-20 - Swing/faceplate: 2,000 mm - Spindle speed: 4–600 rpm - Z-axis travel: 1,000 mm - Servo motors X/Z: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,500 kg, dimensions: 2200 × 2600 × 2750 mm KRAFT FB-25 - Swing/faceplate: 2,500 mm - Spindle speed: 4–400 rpm - Z-axis travel: 1,500 mm - Servo motors X/Z: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 8,000 kg, dimensions: 2500 × 3000 × 3100 mm KRAFT FB-30 - Swing/faceplate: 3,000 mm - Spindle speed: 4–400 rpm - Z-axis travel: 1,500 mm - Servo motors X/Z: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 10,000 kg, dimensions: 3000 × 3200 × 3350 mm COMMON DATA FOR ALL SIZES Turning length 330 mm · max. workpiece length 450 mm · bed width 450 mm · floating workpiece weight max. 3,000 kg · cross slide width 250 mm · X axis travel 330 mm · spindle bore 155 mm (230 mm opt.) · spindle nose A2-11 (A2-15 opt.) · spindle taper 7 MT · 4 spindle speed ranges · spindle motor 22 kW (29 kW opt.) · rapid traverse X/Z 6/8 m/min · 4-station tool post, tool shank 32 × 32 mm CUSTOMISABLE TO YOUR REQUIREMENTS Send us your specific application — range of workpieces, required accuracy, preferred control system — and we will configure the FB series according to your needs. Cedpfoc Txdhox Aplsrb Attractive leasing and hire-purchase terms available through our partners. Delivery free domicile with installation, commissioning, and operator training upon request.

Stanje: pripravljen za uporabo (rabljen), Bosch SM 15/30-TC 1 servomodule 1070075975-101 SN:001526370, rabljeno, v dobrem stanju, 100% delujoče, dobava po slikah. Crjdpfx Asy Np H Esplob

Leto izdelave: 1985, stanje: pripravljen za uporabo (rabljen), Stroj za izdelavo tlačnih vzmeti. Večina strojev znamke Schenker, kakor tudi nekateri stroji Bamatec, je na voljo pri nas. Codpjf I Uumjfx Aplorb

Stanje: rabljeno, Leto izdelave: 1971, skupna dolžina: 3.000 mm, skupna širina: 2.000 mm, skupna višina: 3.000 mm, Hmotnosť: 10.000 kg - Letnik: 1971 - Dokumentacija na voljo: Ne - CE certifikat: Ne - Serijska številka: 20956 - Upravljanje: Teach-in - Znamka krmilnega sistema: Unimec - Število osi [kos]: 3: Y1+Y2+X - Tlačna sila [ton]: 150 - Največja delovna širina [mm]: 3050 - Razdalja med stojali [mm]: 2500 - Globina zadnjega naslona [mm]: 750 - Bombirni sistem: Ne - Nosilec orodja: Standard - Vključena orodja: Da - Transportne mere: 3000mm x 2000mm x 3000mm (d x š x v) - Transportna teža [kg]: 10000kg - Število transportnih paketov [kos]: 1 Finančne informacije DDV: Cena je brez obračunanega DDV DDV/maržna obdavčitev: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vse vrste industrijskih strojev Crsdpjybdknefx Aplob Lukas van Rossum

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Polnilnik Csdjywpmnopfx Aplsrb Stanje: Nova naprava Tehnično stanje: Novo Opis: Visokofrekvenčni polnilnik na voljo v naslednjih zmogljivostih: 24V 50A, 24V 40A, 24V 30A, 24V 20A, 24V 15A, 24V 10A. Za dodatna vprašanja nas prosim pokličite. Poleg tega modela imamo na zalogi še približno 150 drugih viličarjev. Obiščite našo spletno stran fleischmann-foerdertechnik. Z veseljem vam ponudimo tudi leasing & financiranje ter ugodne pogoje dostave. Možen je tudi odkup Linde naprav – tudi če pri nas ne kupite naprave. Navedene delovne ure so bile odčitane na dan vnosa oglasa. Predhodna prodaja, spremembe in napake pridržane.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Polnilnik Stanje: Nova naprava Tehnično stanje: Novo Opis: Visokofrekvenčni polnilnik je na voljo v naslednjih zmogljivostih: 24V 40A, 24V 30A, 24V 20A, 24V 15A, 24V 10A. Za dodatna vprašanja nas prosimo pokličite. Poleg tega modela imamo na zalogi še približno 150 drugih skladiščnih vozil. Obiščite našo spletno stran fleischmann-foerdertechnik. Najem in financiranje ter dostavo po ugodnih pogojih uredimo po povpraševanju. Možen je tudi odkup Linde naprav – tudi če pri nas ne kupite druge naprave. Število obratovalnih ur je bilo prebrano v času objave oglasa. Vse cene so brez predhodne prodaje, sprememb in napak. Codpfoywpmhjx Aplorb

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Polnilec Cjdpfxsywpmbe Aplerb Stanje: Nov aparat Tehnično stanje: Novo Opis: Visokofrekvenčni polnilec je na voljo v naslednjih kapacitetah: 24V 30A, 24V 25A, 24V 20A, 24V 15A, 24V 10A. Za dodatna vprašanja nas lahko pokličete. Poleg tega modela imamo na zalogi še približno 150 drugih skladiščnih vozil. Obiščite našo spletno stran fleischmann-foerdertechnik. Ponudbo za leasing in financiranje ter dostavo pod ugodnimi pogoji vam pripravljamo z veseljem. Možen je tudi odkup naprav znamke Linde – tudi če pri nas ne opravite nakupa. Navedene delovne ure so bile odčitane na dan vnosa. Pridržujemo si pravico do vmesne prodaje, sprememb in napak.

Stanje: rabljeno, največja dovoljena obremenitev: 1.037 kg, skupna masa: 1.500 kg, konfiguracija osi: 1 os, prva registracija: 05/2022, dolžina tovornega prostora: 3.070 mm, širina tovornega prostora: 1.830 mm, višina nakladalnega prostora: 600 mm, skupna širina: 1.900 mm, skupna višina: 600 mm, Priklopnik za prevoz vozil, proizvajalec STEMA, tip Carrier XL 15-30-18.1, Cedsym Ifgspfx Apljrb Registrska številka: L-AH 142, . WSEHARF41NG000366, , Dovoljena skupna masa: 1.500 kg, visokonaložni, z inercijsko zavoro, 100 km/h, 2 nalivne rampe za registrsko tablico, nove pnevmatike Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, hod: 700 mm, globina grla: 350 mm, upogibna sila (maks.): 150 t, razdalja med stojali: 3.050 mm, delovna dolžina: 3.550 mm, Krmilnik je bil leta 2011 predelan! TEHNIČNI PODATKI Pritisk: 150 t Dolžina upogiba: 3.550 mm Razmik med stebri: 3.050 mm Hod: 700 mm Izrez: 350 mm Cedpfx Apexn Srxjlsrb PODROBNOSTI STROJA Krmilnik: Cybelec DNC 880S Dimenzije in teža Dimenzije (D x Š x V): 4.400 × 2.200 × 3.940 mm Teža stroja: ca. 15.000 kg OPREMA Pomoč pri upogibanju pred strojem Parkirišče za pomoč pri upogibanju 3 referenčni prsti

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992, X-os: 3000 mm, Y-os: 1200 mm, Z-os: 1500 mm, merilna glava: PH10, merilni sistem: TP 20 mm, premer tasterja: 4 mm, dolžina tasterja: 25 mm, generalno obnovljeno leta 2018. Možen ogled na lokaciji. Z dokumentacijo. Crjdpfx Aext Rlujplob

Leto izdelave: 2001, stanje: rabljeno, številka stroja/vozila: 12117, Continuous Furnace / Brazing Furnace Cedpfx Ajwku N Uepljrb Maximum Operating Temperature: 1120°C Normal Operating Temperature: 1050°C Conveyor Belt: Usable Belt Width: 250 mm Usable Belt Height: 150 mm Heating Chamber: Chamber Length: 1530 mm Chamber Width: 500 mm Chamber Height: 500 mm Installed Power, Gas: 33 kW Number of Heating Zones: 3 Number of Control Zones: 3 Voltage: 3 x 400 / 230 V Frequency: 50 Hz You are welcome to schedule an appointment for a viewing.

Leto izdelave: 1970, stanje: rabljeno, Tehnične podrobnosti: Cedpfxsxu Dwyo Apljrb Pomik X: - mm Pomik Y: - mm Pomik Z: - mm Teža obdelovanca: 800 kg Teža stroja pribl.: 0,75 kg Dimenzije stroja pribl. D x Š x V: 1,2 x 0,8 x 2,0 m Zarezna udarna žilavost je merilo za to, kako odporen je material na nenadne udarne obremenitve, zlasti če ima predhodno narejeni zarez. Uporablja se predvsem pri kovinah za ocenjevanje lomne žilavosti pod dinamičnimi obremenitvami.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, High-pressure fan, dust extraction fan, pressure fan, vacuum fan, high-pressure ventilator Model: VRU 15-100-30H2,8 Condition: Used Drive motor: 3.5 kW p1: 1.15 kg/m³ Speed: 2,880 rpm Airflow: 0.315 m³/s Pressure point: 62 mbar Inlet connection: Ø 100 mm Outlet connection: Ø 100 mm Dimensions: 1000 x 600 x 700 mm Weight: 180 kg Location: available ex stock 54634 Bitburg - immediately available - Crodovlz Arepfx Aplsb

Stanje: rabljeno, Welding bar Cjdpfx Asd I Hizsplerb -from: vacuum device Röschermatic VM 45/2 -Price: per piece -Quantity: 4 pieces -Dimensions: 635 mm / 15 mm / 30 mm -Weight: 2.2 kg/piece

Stanje: rabljeno, Welding Bar Crodpfed I Hi Asx Apleb -from: Vacuum Packaging Machine: Röschermatic VM 45/2 -Price: per piece -Quantity: 2 pcs. -Dimensions: 680 mm / 15 mm / 30 mm -Weight: 2.4 kg/pc.

Stanje: dober (rabljeno), Grinding media, ceramic grinding media, polishing media for vibratory tumbler, mass finishing system, vibratory finishing machine, trowalizing system, continuous flow vibrator, ceramic grinding media Crjdpfxsrxw E Ns Apljb -Manufacturer: Walther Trowal, ceramic grinding media type C 15 x 30 ZS Ultra-Chips -Grit size: see photos -Price/sale: as a complete lot -Transport dimensions: 900/200/H500 mm -Total weight: 76 kg