Pečica na vroč zrak

Compactsystem MARTINA 85

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Hjdpfovz Hq Hox Agtol Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 1.154 h, For sale: fully operational and ready-for-work chain trencher (mini trencher) from one of the top brands on the market – Vermeer. We have a wide range of machines and equipment from this manufacturer, and all are serviced in-house. We offer various machines that assist in landscaping and similar tasks. The Vermeer RTX100 is perfectly suited for trenching cable or pipe runs. With the installed chain saw, trenching up to 1 meter depth is possible. The last machine service was performed at 1148 operating hours – relatively recently. Engine: - Kohler CHL15 - 15 HP - Single-cylinder - Petrol - Displacement: - Fuel tank: 6.1 l - Hydraulic tank: 37.8 l - Hydraulic system: 39.7 l - Engine oil: 1.13 l Hydraulic system: - Pump type: Tandem piston pump - Ground drive flow at max engine RPM: 20.4 l/min - Auxiliary pump flow at max engine RPM: 41.6 l/min Ground drive: - Type: Hydrostatic - Max transport speed forward (full throttle): 64 m/min - Max transport speed reverse (full throttle): 25.9 m/min - Steering system: VZ Steering System Chain Trencher: - Boom length: 91.4 cm - Cutter width: 15.2 cm - Auger diameter: 40.6 cm - Outer auger bearing support: Standard - Crusher: Optional - Safety belt: Standard Transport dimensions: - Weight (base tractor with tires): 910 lbs (412.7 kg) - Length (base tractor): 81.4" (206.7 cm) - Width (base tractor with tires): 35" (88.9 cm) - Height (base tractor with tires): 46" (116.8 cm) - Wheelbase (centerline): 34.2" (86.8 cm) - Tire tread width: 8.5" (21.5 cm) - Track contact length: 19" (48.2 cm) - Track width: 7" (17.7 cm) Note! The listed price is net (excl. VAT). For export and for companies eligible for VAT deduction, net prices apply. Hsdpfx Agswbtytotol Private customers may receive a discount – Feel free to contact us directly by phone for your best offer :)

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Volume: 1000 l, maximum temperature: 750°C, heating capacity: 40 kW, machine dimensions (L/W/H): approx. 2500 mm / 1600 mm / 1900 mm, weight: approx. 2000 kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Hodpfx Ajw Emyzegtol

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Viesmann Vitoplex 100 LS with Weishaupt WM - G10/4A Hsdpetrl Skefx Agtsl

Stanje: rabljeno, 4 stainless steel tank containers, used Capacity: 35 cbm Order number: 4244 Material: 1.4404/1.4401 External dimensions: 7,820 mm length 2,438 mm width 2,591 mm height Operating data (per type plate): 1 tank: -0.4/+4 bar operating pressure, 150°C Hsdpov Dtgaofx Agtol 1 tank: -0.4/+3 bar operating pressure, 110°C 1 tank: +3 bar operating pressure, 120°C 1 tank: +4 bar operating pressure, 130°C Design: Cylindrical horizontal vessel in 20' transport frame with dished ends Half-pipe coil approx. 6.5 sqm heating surface, designed for 3 or 4 bar operating overpressure Insulation: 50 mm around cylinder and ends Connections: 2 manholes DN 500 on the top centerline plus various connections Outlet at front end Weight: approx. 4.4 t Optional: Frame for 4 tank containers made of painted mild steel, delivered disassembled for transport External dimensions: 9,173 mm length, 7,254 mm width, 6,124 mm height Additional price on request.

Stanje: dober (rabljeno), A-100730 - Horisontal tank 16 m3 Horisontale tanke 16.000 L, Rustfrit stål AISI 316, Hjdpfx Ajiiyufjgtol Mål: Ø 2530 mm x H 2900 mm x L 3800 mm Mandørlåg foran

Stanje: rabljeno, kapaciteta rezervoarja za gorivo: 128 l, Leto izdelave: 2018, obratovalne ure: 8.440 h, Leto izdelave: 2018 Namen uporabe: Gradbeništvo Hedpfjxqfc Nox Agtjl Lastna teža: 9.000 kg Dimenzije (D x Š x V): 699 x 220 x 257 cm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, new KAESER TB19 refrigeration compressed air dryer, featuring energy-saving SECOTEC control system. Equipped with electronically controlled condensate drain. Year of manufacture: 2024 Technical data: - Flow rate: 2.10 m³/min - Pressure dew point: 3°C - Overpressure: 3 to 16 bar - Ambient temperature: +3°C to +43°C - Maximum compressed air inlet temperature: +55°C - Compressed air connection: G 1" - Dimensions (W x D x H): 620 x 540 x 963 mm - Weight: 108 kg Electrical supply: 230 V / 1 phase / 50 Hz Hedpfed S S T Dex Agtol Visit our showroom in Erlangen. On more than 450 sqm of exhibition space, you will find a large selection of used and new compressors.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Patented electric heating solution for efficient and comfortable heating. Heating output: 2.8 kW (infrared 1.6 kW and halogen 1.2 kW) Suitable for approx. 10-35 sqm area with a room height of approx. 2.5 m Hsdoqvmcpepfx Agtel Connected load: 11.8 A Dimensions: 54x29x80 cm Weight: 15 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h Hedsvz Hqyjpfx Agtel - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.