Compactsystem Martina 85 nakup rabljenega (3.646)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. Pedpfovz Hq Tjx Anperc - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. Pjdpfxovz Hqmj Anpjrc All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ Pedpfx Aovz Hqtjnperc - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet Pedjvz Hhxepfx Anpjrc The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm Psdpfx Anevz Hqgjpsrc - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 Prsdjvz Hqyspfx Anpoc The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar Psdpfxsvz Hq Hj Anperc - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1973, skupna širina: 1.950 mm, skupna dolžina: 5.650 mm, skupna višina: 1.920 mm, priključek za stisnjen zrak: 7 letvica, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, obratovalni tlak: 7 letvica, skupna masa: 2.300 kg, vrsta vhodnega toka: trifazni, KAPACITETA 250 kos/min Psdpfozga T Iex Anpsrc KAPACITETA (OTRPLJENA VREČKA) 100 kos/min ŠIRINA VREČKE 830 mm DOLŽINA VREČKE 70-1000 mm DEBELINA VREČKE 0,020-0,100 mm ŠTEVILO SERVO MOTORJEV 4 kosi SKUPNA MOČ 11 kW ŠIRINA STROJA 1760 mm DOLŽINA STROJA 5650 mm VIŠINA STROJA 1920 mm TEŽA STROJA 2300 kg STANDARDNE LASTNOSTI - S pomočjo zaslona na dotik je mogoče nastaviti oziroma spremljati dimenzije vrečke, število vrečk, proizvodno hitrost, količino vrečk v paketu ter število zaustavitev v skupnem seštevku. - Ena fotocelica omogoča rezanje tako potiskanih kot nepotiskanih vrečk. - Pogon vlečnih valjev z elektromotorjem s servokrmiljenjem omogoča rezanje pri visoki hitrosti ter z želeno natančnostjo. - Servokrmiljena varilna čeljust zagotavlja močan in kakovosten var. - S pomočjo servomotorno krmiljenega transportnega traku delujejo trakovi sinhrono s sistemom zlaganja. - Stoper valjčni sistem s servokrmiljenjem za boljše zlaganje. - Frekvenčni regulator napetosti odvijanja ovitkov. - Pnevmatski 'ballerina' sistem. - Samodejni sistemi za kontrolo robov. - Samodejna zaustavitev stroja, ko zmanjka materiala na kolutu. - Samodejna zaustavitev stroja s fotocelico, če odtis ni na pravem mestu. - Možnost izdelave iz PP, OPP, CPP, polietilena visoke gostote (HDPE), polietilena nizke gostote (LDPE) vrečk. STANDARDNA OPREMA - Enota za aplikacijo ročajev z ojačitvijo - Enota za izsekavanje luknje za ročaj - Aparat za varjenje spodnje podpore - Aparat za izdelavo spodnjega pregiba (guse) - PE stranska varilna (izkopna) čeljust - PE dvojna varilna (majica/t-shirt) čeljust

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.650 mm, skupna dolžina: 5.450 mm, skupna višina: 1.900 mm, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, skupna masa: 1.475 kg, vrsta vhodnega toka: trifazni, CAPACITY 250 pcs / minute max. BAG WIDTH 80 mm – 800mm max BAG LENGTH 70 mm -1000 mm FILM THICKNESS 0.020 mm- 0.100 mm TOTAL ELECTRIC POWER 13 kW (380 V-50Hz) SERVO MOTOR 4 UNIT FOTOCELL 1 UNIT TOTAL AIR SUPPLY 6 Bar min MACHINE WIDTH 1650 mm MACHINE LENGTH 5450 mm MACHINE HEIGHT 1900 mm WEIGHT 1475 kg STANDARD FEATURES Through touch operator panel; length of the bag, pieces bag, production speed, visible bag pieces in the package, stop feature in the number of written in total counting.  There is one Photocell. Cut are printed and unprinted bags.  It cuts at high speed and with the desired measurement precision through to the servo motor controlled pulling rollers.  Strong and high quality welding is achieved through to the servo motor controlled welding jaw.  Through to the servo motor controlled belt system, belts work synchronously to the stacking system.  Prsdpezd N Ipsfx Anpsc Through to the servo motor controlled stacking rollers, it provides quality stacking.  Warp rolls with inverter tension control system,  Pneumatic ballerina system,  Automatic edge control system,  Automatically stops when the roll runs out,  When the photocell print location is not correct, it automatically stops.  Roll bobbin binding diameter max 800 mm  Ability to work in PP, OPP, CPP, High Density Polyethylene (HDPE), Low Density Polyethylene (LDPE), bags,

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 935 mm, pomik osi Y: 850 mm, pomik po osi Z: 650 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530 HSCI, obremenitev mize: 1.000 kg, skupna masa: 14.000 kg, največja hitrost vretena: 18.000 obr/min, število mest v zalogovniku orodij: 60, Vključitev v obrat: 2013 z okroglim pomnilnikom RS 3 (3 palete) Nadzorni sistem: Heidenhain iTNC 530 HSCI Približno 60 orodij – SK40 Pedpfxo Agnwds Anperc IKZ (notranji sistem za dovajanje hladilne tekočine) Heidenhain infrardeči merilni tipalo Blum lasersko merjenje 3D Quickset Filtrirni sistem za zrak električno ročno koleso

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, DAF CF 85 z betonsko mešalico C&B DUE Registracija 28.06.2005 – Euro 3 Prsdpfj Agncgox Anpec Prevoženi kilometri: 505969 Število osi: 4 Nadgradnja: betonska mešalica C&B DUE Stanje pnevmatik: 50/60 % Veljavni tehnični pregled Dobro stanje Na voljo takoj PREDSTAVIMO PONUDBE ZA ZAMENJAVO VOZIL VSEH ZNAMK, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, Z OPREMO CIFA, SERMAC, PUTZMEISTER; ALI GRADBENIH STROJEV CATERPILLAR, FIAT HITACHI, KOMATSU.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: LR2009MAHEDEDM100PO1, vrsta vhodnega toka: Klimatska naprava, skupna širina: 1.150 mm, skupna dolžina: 2.850 mm, skupna višina: 1.900 mm, skupna masa: 1.100 kg, zunanji premer koluta etiket: 550 mm, notranji premer koluta etiket: 76 mm, vhodna napetost: 380 V, priključek za stisnjen zrak: 6 letvica, For sale is a fully automatic mask making machine DM-85-P (CE-compliant) with 380V connection – suitable for producing masks of type II and IIR. This mask machine processes multi-layered materials into various mask types through forming, ultrasonic welding, ear loop welding, and nose wire welding. The fully automatic mask making machine Lianrou LR-DM-85-P is a late model and a patented product from LIAN ROU. Podsya Hdbopfx Anpjrc Compared to conventional disposable mask machines, it offers the following advantages: Firstly, the LR-DM-85-P requires only one unit to complete the entire mask production process, thus significantly reducing the production line’s space requirements. Secondly, its comprehensive production design features a neat and aesthetic appearance. More importantly, it is equipped with several reliable safety features, ensuring a safe operating environment for the operator. In summary, this machine offers excellent value for money and high reliability. Technical data / notes: Model: DM-85-P Design: Electric-pneumatic Voltage: 380V Certification: CE Manufacturer documentation available (circuit diagrams & manuals) If you are interested, feel free to contact us – viewing by appointment possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 18738, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 600 h, vrsta vhodnega toka: trifazni, širina brusilnega traku: 150 mm, dolžina brusnega traku: 7.800 mm, vrsta nastavitve višine: električni, skupna višina: 1.310 mm, skupna dolžina: 1.510 mm, skupna širina: 3.880 mm, skupna masa: 750 kg, zahteva za prostor dolžina: 3.880 mm, potrebna širina: 2.352 mm, dolžina mize: 2.800 mm, nastavitev višine mize: 220 mm, širina mize: 950 mm, Oprema: dokumentacija / priročnik, Wide Belt Sander Johannsen Model T 85/PNEUMA Year of manufacture: 1990 Operating hours: approx. 600 Machine Data: Footprint: Overall length: 3880 mm Depth: 1510 mm Height: 1310 mm Required space: Length: 3880 mm Depth: 2352 mm Table size: 2800 x 950 mm Weight: 750 kg Equipment: • Pneumatic sanding unit • 4 sanding shoes • Lighting inside belt cover • Vacuum clamping device incl. vacuum pump • Belt blow-off nozzle • Pneumatic rotary table • 2 belt speeds • Pneumatic belt tensioning • Electric table elevation • Rack with approx. 100 sanding belts / belt dimensions: 7800 x 150 mm Filter Unit: Base area: 1600 x 960 mm Height: 2850 mm 18 fine filters Prodpougvxxsfx Anpsc Machine is fully operational Condition: Very good

Stanje: zelo dobro (rabljeno), Oprema: CE označba, dokumentacija / priročnik, dozator, zaščitni pokrov žaginega lista, Zelo dobro vzdrževana žaga Cut 85, vključno s sistemom za podajanje materiala Barbaric, dolžina reza 3200 mm. Psdpjz Ad I Ijfx Anporc Demontaža naprave bo potekala konec oktobra.

Stanje: rabljeno, Leto izdelave: 1994, obratovalne ure: 392 h, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 1115, vrsta vhodnega toka: trifazni, skupna višina: 150 mm, skupna dolžina: 2.200 mm, skupna širina: 900 mm, skupna masa: 1.800 kg, moč: 11 kW (14,96 KM), vhodna napetost: 380 V, Oprema: dokumentacija / priročnik, Znamka: Pawert Tip: I-40/85 Letnik: 1994 Proizvodnja: 150 kg/uro Dimenzije briket: Ø 40 mm Motor: 11 kW Teža: 1800 kg vključno z dovornim vijakom in izhodnim vodilom. Prodpfxezyau Ee Anpec

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Kataloška številka 7809 TEHNIČNI PODATKI - sila stiskanja: hidravlična - oblika briketa: okrogla - premer briketa: 70 mm - premer rezervoarja: 900 mm - avtomatsko delovanje stroja - vizualno okno v dovodnem lijaku stroja - opremljena z dodatnim grelnikom za olje - motor: 5,5 kW - dimenzije (d/š/v): 1600x1200x1500 mm - teža: 685 kg PREDNOSTI - nelakirana - italijanska proizvodnja - opremljena z dodatnim grelnikom za olje Predezu Sxxspfx Anpec - rabljena briketirna naprava - zelo dobro stanje Neto cena: 36900 PLN Neto cena: 8581 EUR, odvisno od menjalnega tečaja 4,30 EUR (Cene se lahko spreminjajo glede na večje nihaje menjalnega tečaja)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Rex RKS 85 | Sausage Hanging and Twisting System Manufacturer: REX Technologie GmbH & Co. KG Model / Type: RKS 85 Serial Number: 2130216 Year of Manufacture: 2016 Power Supply: 400 V / 50/60 Hz Current Protection: 3x 16 A Overall Dimensions: 1450 x 660 x 1400 mm The Rex Technologie RKS 85 is a high-performance, automatic sausage twisting and hanging system (longitudinal calibrating), designed as a peripheral device to work directly with vacuum fillers. The 2016 unit represents a key element in automating production processes in medium and large-scale sausage production facilities. The RKS 85 system is responsible for the precise, repeatable portioning of sausage strands into uniform sections (in natural, artificial, or collagen casings), followed by automatic loop forming and precise placement onto hooks—for easy transfer onto smokehouse rods. The machine minimizes the risk of casing breakage and guarantees a constant weight and identical length of each individual sausage. Key features and benefits: - Precise portion control and calibration: An advanced belt-driven feeding and portioning system gently yet securely grips the filled casing, eliminating air pockets inside the sausage and ensuring an ideal appearance of the final product. Prjdpfoy Uchmex Anpjc - Versatility and quick retooling: The machine efficiently handles a wide range of sausage calibers and lengths (from thin kabanos to traditional grill sausages or frankfurters). Product parameters and assortment can be easily changed via the vacuum filler’s control computer or the machine’s control panel.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Agfa Arkana 85 stroj za razvijanje plošč, letnik 2019, odlično ohranjen. Pjdpfx Anjywvauopsrc

Stanje: rabljeno, Industrijski udarni drobilnik, drobilnik z udarnimi ploščami, Maschinenfabrik Liezen, 22 kW, rabljeno strojno opremo Proizvajalec: Maschinenfabrik Liezen G.m.b.H. Tip: CI 85-60 F Serijska številka (št. stroja): 92 117 20 Proizvajalec električnega motorja, moč: Siemens, 22 kW (1460 vrt/min, 400 V) Stanje: Rabljeno, industrijska izvedba Celotne mere (drobilnika): 2300 x 1600 x 2000 mm Mere za namestitev: 3430 x 1540 x 1900 mm Mere motorja: 1000 x 1000 x 620 mm Velikost vhodne odprtine: 620 x 320 mm Tehnični in operativni parametri: Izvedba rotorja drobilnika: 3 udarne plošče Pogon: 22 kW Siemens trifazni električni motor (141 kg) Podpfjz D Hb Rox Anpsrc Izvedba: Robustna konstrukcija z notranjimi ploščami, odpornimi proti obrabi.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1997, obratovalne ure: 1.165 h, moč: 59 kW (80,22 KM), vrsta goriva: dizel, skupna masa: 4.100 kg, število valjev: 4, proizvajalec motorjev: Iveco, vrsta prenosa: hidrostat, Oprema: hidravlika, osvetlitev, spojka prikolice, zadnja priključna gred, Gosenični traktor Potrjene originalne delovne ure Prjdps Ad Rvrjfx Anpsc Hidravlični sistem na zadnji strani Priključna gred Dvigalni mehanizem

Stanje: rabljeno, Leto izdelave: 2001, 3 x stroji Trumpf za upogibanje (hidravlične upogljalne stroje): Podpfx Aez Tfmronpjrc • TrumaBend V50 | Letnik 1997 • TrumaBend V85 | Letnik 1997 • TrumaBend V85 S | Letnik 2001 Stanje in vzdrževanje: Kot je razvidno iz priloženih slik, so bili vsi stroji redno vzdrževani v okviru letnih pregledov v skladu s predpisi o varnosti in zdravju pri delu (UVV). Zadnji pregled je bil za vse naprave opravljen poleti 2026. Stroji so trenutno še v redni proizvodnji in so popolnoma pripravljeni za uporabo. Ogled in kontakt: Ogled je možen na licu mesta med delavniki do 14:00.

Stanje: dober (rabljeno), Leto izdelave: 1977, Funkcionalnost: popolnoma funkcionalen, Weinig Tip PFA 250/85 Letnik 1977 1 U-7,5 kW 2 R-7,5 kW 3 L-11 kW 4 R-5,5 kW 5 O-11 kW 6 O-7,5 kW 7 U-7,5 kW Predpfx Anez I A N Ejpjc 8 Uni 7,5 kW Miza 2,5 m 6 in 7 vreten z glodalom Napajalni motor 5,5 kW

Stanje: dober (rabljeno), Šifra: 0501 Znamka: COLOMBO FILIPPETTI Model: VARISPEED VS 85 – v skladu s standardom CE Profesionalna krožna žaga, visoka zmogljivost in natančnost reza – v skladu s standardom CE Idealna za intarzije na lesu, vezanih ploščah, plastiki in lahkih zlitinah, uporabna v področjih umetnosti in obrti, izdelavi modelov, domačih projektih, mizarstvu ter tehničnih in poklicnih šolah. Izjemno tiho delovanje. Enofazni motor, 220 voltov, 0,55 kW. Napetost lista žage je enostavno nastavljiva. Elektronski regulator hitrosti, upravljan s potenciometrom, ki se aktivira z nogo, od 0 do 1500 vrt/min. Velika in trdna delovna površina, ki se lahko nagiba do 45°, 600 x 600 mm. Uporabna dolžina reza 850 mm. Maksimalna debelina reza 45 mm (listi žage 130 mm) oziroma 65 mm (listi žage 150 mm). Psdpfxe Aaydkj Anperc Priključek za odsesavanje prahu. Celotne dimenzije: 1400 x 610 x 1560 mm (višina). Teža: 140 kg.

Stanje: dober (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Stroj za stiskanje bal, Presona LP 85 VH2, leto izdelave 2018 Tehnični podatki: Proizvajalec: Presona Sweden Tip: LP 85 VH2 Leto izdelave: 2018 Moč pogona: 2 x 45 kW Delovnih ur: 40.350 Dejanske delovne ure: pribl. 22.000 Stiskalna sila predstiskovalnika: 28 t Stiskalna sila glavnega stiskalnika: 85 t Dimenzije vstopnega jaška: 1500 x 1100 mm Dimenzije bale: 750 x 1100 mm Teža bale: 450 – 650 kg Teoretična volumetrična zmogljivost: 1200 m³/h Procesna zmogljivost pri 30-100 kg/m³: 13-30 t/h Zavezovanje: 5-kratno vertikalno, (3-kratno horizontalno) Prostornina rezervoarja za olje: 2000 l Transportne dimenzije stroja: 10400 x 2400 x 2800 mm (D x Š x V) Teža: pribl. 27000 kg Materiali: papir, karton, PET steklenice, folije, lahki odpadki. Opomba: Stroj je v dobrem stanju. Bil je odstranjen iz redne proizvodnje. Horizontalno zavezovanje trenutno ne deluje. Tehnična dokumentacija je na voljo. Izvedli smo naslednja dela: Nove zaščitne plošče (Hardox) v stiskalnem kanalu Popolna menjava tesnil na glavnem cilindru Menjava oljnega filtra Pregled in popravilo vertikalnega zavezovanja. Podpfx Ansz H I E Aopsrc Prosimo, upoštevajte: Vsi tehnični podatki se nanašajo na specifikacije proizvajalca. Za navedene podatke in morebitne napake ne prevzemamo odgovornosti. Ponudba je nezavezujoča, pridržujemo si pravico do vmesne prodaje in jo lahko kadar koli prekličemo. Ogledi so možni po dogovoru. Prodaja poteka ob predhodnem plačilu, z dostavo iz tovarne, brez garancije. Naš pogoj plačila je 100-odstotno predhodno plačilo.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Horizontalna vrtalna strojna miza z oporo in digitalnim prikazovalnikom na 3 osi. Proizvajalec: Collet & Engelhard Tip: BFb 85 n Hodi osi X: 2400 mm Y: 1000 mm Z: 750 mm Prjdpfxezpfy Eo Anpjc Uporabna površina za vpenjanje: 900 x 1400 mm Premer vretena: 100 mm Vpenjalni sistem orodja: ISA 50 Število vrtljajev: 6 - 1250 vrt/min Moč pogona: 7,5 kW Napetost: 380 V, 50 Hz, trifazni tok