Pečica na vroč zrak

Compactsystem MARTINA 120

Dimensions (L x W x H): 800 x 1170 x 2300 mm
Weight: 650 kg
Total power requirement: 1.05 kW
Hot Air Furnace MARTINA 120

The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material.

The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV.

- Automatic and continuous air operation
- Thermal output: 145 kW
- Thermal output: 125,000 kcal
- Fuel consumption: 30 kg/h
- Air flow rate: 9,000 m³/h
- Combustion chamber depth: 950 mm
- Charging door: 460 x 440 mm
- Hot air blower: 1.05 kW / 230 V
- Firebox negative pressure: 0.2–0.3 mbar
- Draft required at rated output: 0.18 mbar
- Heatable room volume: approx. 2,500 m³
- Heatable area: approx. 500 m²
- Space requirement: width 800 mm, depth 1170 mm, height 2300 mm
- Weight: 650 kg
- Flue pipe diameter (spigot): 200 mm
- Chimney diameter (recommended): 250 mm
- Efficiency: 85–90 %
- Chimney draft pressure: 16 Pa
Kdsdpfx Aovz Hhxsf Tjg
- Flue gas temperature: 287 °C
- Hot air outlet nozzles: 2 x Ø 220 mm
- For further specifications, please refer to the attached data sheet

The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.