Pečica na vroč zrak
Compactsystem MARTINA 350

Name: Compactsystem MARTINA 350
Brand: Compactsystem
Price: 16000 EUR
Availability: InStock

Fiksna cena plus DDV

16.000 €

Leto izdelave

2025

Stanje

Novo

Lokacija

Leipzig

Pečica na vroč zrak Compactsystem MARTINA 350

Prikaži karto

Podatki o stroju

Oznaka stroja:: Pečica na vroč zrak

Proizvajalec:: Compactsystem

Model:: MARTINA 350

Leto izdelave:: 2025

Stanje:: novo

Cena in lokacija

Fiksna cena plus DDV

16.000 €

Lokacija:: Leipzig

Pokliči

Podrobnosti ponudbe

ID oglasa:: A18539956

Referenčna številka:: 1327-10326

Posodobitev:: nazadnje dne 15.12.2025

Opis

Dimensions (L/W/H): 1700 x 2000 x 2550 mm
Weight: 1400 kg
Total power requirement: 4.5 kW
Hot Air Furnace MARTINA 350

The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses.
They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies.
These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly.

The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes.
MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE.
All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV.

- Automatic operation and continuous air mode
- Thermal output: 390 kW
- Thermal output (Kcal): 335,000
- Fuel consumption: 85 kg/h
- Air output: 20,000 m³/h
Nlodpfx Aevz Hqyegxja
- Combustion chamber depth: 1400 mm
- Feed door: 500 x 700 mm
- Hot air blower: 4.48 kW
- Combustion chamber negative pressure: 0.2-0.3 mbar
- Draft requirement at nominal load: 0.18 mbar
- Heatable volume: approx. 7,500 m³
- Heatable area: approx. 1,600 m²
- Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm
- Weight: 1400 kg
- Flue pipe diameter (connector): 300 mm
- Recommended chimney diameter: 350 mm
- Efficiency: 85-90%
- Flue draft: 11.5 Pa
- Flue gas temperature: 289 °C
- Hot air outlet sockets: 2 x Ø 450 mm
- For more technical data, please refer to the attached data sheet

The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section.
A maximum of 20 meters of pipe per connector is permitted for air distribution.
Longer pipe runs are possible on request and with the manufacturer’s approval.
Please contact us for further information.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2003

546 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 341 9... oglasi

+49 341 4... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Pnevmatike M/T 255/75 17 Firestone Destination

Malawa

681 km

Pnevmatike M/T 255/75 17
FirestoneDestination

300 €

Fiksna cena plus DDV

Pokliči

Mali oglas

Pečica na vroč zrak Compactsystem MARTINA 55

Leipzig

609 km

Pečica na vroč zrak
CompactsystemMARTINA 55

4.300 €

Fiksna cena plus DDV

Pokliči

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. Nledpfx Agjvz Hq Hexoa The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Poglej podrobnosti

Mali oglas

Ogrevalni sistem Viesmann Vitoplex 100 - LS

Grevesmühlen

901 km

Ogrevalni sistem
ViesmannVitoplex 100 - LS

Pokliči

Mali oglas

Tönisvorst

850 km

Tailstock 5275
MK 2hoehenverstellbar

150 €

Fiksna cena plus DDV

Pokliči

Mali oglas

Pečica na vroč zrak Compactsystem MARTINA 85

Leipzig

609 km

Pečica na vroč zrak
CompactsystemMARTINA 85

5.600 €

Fiksna cena plus DDV

Pokliči

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. Nodpfx Aevz Hq Tjgxela They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Poglej podrobnosti

Mali oglas

Bremen

881 km

4 cisterne iz nerjavečega jekla 35 cbm

Pokliči

Stanje: rabljeno, 4 stainless steel tank containers, used Capacity: 35 cbm Order number: 4244 Material: 1.4404/1.4401 External dimensions: 7,820 mm length 2,438 mm width 2,591 mm height Operating data (per type plate): 1 tank: -0.4/+4 bar operating pressure, 150°C 1 tank: -0.4/+3 bar operating pressure, 110°C 1 tank: +3 bar operating pressure, 120°C 1 tank: +4 bar operating pressure, 130°C Nedsv Dtgajpfx Agxola Design: Cylindrical horizontal vessel in 20' transport frame with dished ends Half-pipe coil approx. 6.5 sqm heating surface, designed for 3 or 4 bar operating overpressure Insulation: 50 mm around cylinder and ends Connections: 2 manholes DN 500 on the top centerline plus various connections Outlet at front end Weight: approx. 4.4 t Optional: Frame for 4 tank containers made of painted mild steel, delivered disassembled for transport External dimensions: 9,173 mm length, 7,254 mm width, 6,124 mm height Additional price on request.

Poglej podrobnosti

Mali oglas

VODORAVNI REZERVOAR16M3 Holmskov Rustfri A/S W4404

Thisted

1.278 km

VODORAVNI REZERVOAR16M3
Holmskov Rustfri A/SW4404

Pokliči

Mali oglas

Fohnsdorf

119 km

Ogrevalni sistem
URBAS400 KW Anlage

Pokliči

Stanje: generalkompletno obnovljen (rabljeno), ogrevalna zmogljivost: 400 kW (543,85 KM), zahteva za prostor dolžina: 4.500 mm, potrebna višina: 3.300 mm, potrebna širina: 1.400 mm, Warranty on heat exchanger + refractory lining Heating boiler (heat exchanger + refractory lining renewed) Stoker screw Burn-back flap Secondary air blower Primary air blower Flue gas fan Hydraulic unit with cylinder Nledjrp Dvgopfx Agxoa Flue gas pipes (new) Multicyclone (new) Electrical cabinet Computer Complete documentation / operating manual

Poglej podrobnosti

Mali oglas

Goudriaan

973 km

Kosilnica za travo
Agri

Pokliči

Mali oglas

Pečica na vroč zrak Compactsystem MARTINA 30-15

Leipzig

609 km

Pečica na vroč zrak
CompactsystemMARTINA 30-15

3.700 €

Fiksna cena plus DDV

Pokliči

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % Nodpfxovz Hqte Agxjla - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Poglej podrobnosti

Oglašujte tukaj