Pnevmatika s platiščem 2 kosa

Solideal 23-5(150/100-13) reibfrei

Stanje: rabljeno, Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheel, forklift tires - Delivery: in as-is condition as inspected - Tire wear: see photos - Manufacturer: Solideal, 2 pieces, tires with tube and rim - Tire size: 23-5 (150/100-13) - Pressure: bar - Bolt circle (PCD): Ø 162 x 18 mm - Recess: Ø 110 mm - Price/delivery: complete (set) Pedpfx Agsur Alqsxjpr - Weight: 27 kg each

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, For sale: Firestone Destination M/T tires, size 255/75 R17. Ppjdewq Sa Rspfx Agxor We have 5 tires available: 2 of them are like new, used for approximately 1 month.

Stanje: dober (rabljeno), Tailstock Quill size: MT 2 Quill stroke: 30 mm Height adjustable Ppodpfxsdlp Txo Agxer Centre height: 250 – 285 mm Adjustable tilt: -5° to +15° Base dimensions: 230 x 155 mm Weight: 27 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Electric motor, three-phase motor - Condition: unused - Manufacturer: Weg, electric motor type W22 315S/M-04 - Power: 132 kW - Speed: 1,488 rpm - Shaft: Ø 80 x 170 mm - Design: B3 - Protection class: IP 55 Podpouhr R Tofx Agxepr - Dimensions: 1280/640/H845 mm - Weight: 991 kg

Stanje: dober (rabljeno), Platformni voziček, transportni voziček, voziček za težke tovore, mizni voziček, montažni voziček, industrijska prikolica, kontejnerski dolly, prikolica za težke tovore - Platforma: 11.000/3000/H1100 mm - Nosilnost: 100 ton - Krmiljenje: možno z obeh strani - Dolžina vlečne palice: 1500 mm - Oko vlečne palice: Ø 50 mm - Število koles: 32 kosov - Velikost koles: 646/200-480 - Skupne dimenzije: 12.300/3000/H1100 mm Pjdpferd Aclsx Agxjpr - Teža: 12.960 kg - Predaja: v dejanskem stanju kot ogledano - Opomba: pozor na stanje koles

Stanje: novo, Leto izdelave: 2025, volumenski pretok: 300 m³/h, končni tlak: 0,005 letvica, moč: 75 kW (101,97 KM), trajanje garancije: 12 meseci, vrtljajska hitrost (min.): 1.450 obr/min, Single-stage oil-bath rotary vane vacuum pump. Available in stock. Model: Marpa Vacuum MV-0300E Brand new, unused pump. Comes with a 12-month warranty. Ppsdpoftzv Uefx Agxsr Nominal flow rate: 300 m³/h at 50Hz. Ultimate vacuum: 0.5 mbar abs. Motor power: 7.5 kW For any questions, please contact us.

Stanje: rabljeno, Leto izdelave: 2017, Working width: 140 cm Ppjdpfx Aex I Dx Hegxer

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Pjdpevz Hqyefx Agxjpr Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: rabljeno, Leto izdelave: 2026, The device is designed for cooling tubes in CO2 laser plotters by using a refrigeration unit. The CW3000 chiller maintains the water temperature at an optimal level. Thanks to this cooling system, the tube operates under stable working conditions. The CO2 chiller ensures optimal operating conditions for the tube, effectively protecting it against overheating and damage. The device is intended for individuals or companies where the laser plotter is used as a daily work tool. Ppodpji D D Rvofx Agxer Technical specifications Power supply: 230V Current consumption: 0.45A Cooling capacity: 50 W/°C Tank capacity: 9 L Connections (inlet/outlet): 10 mm Max. operating height: 10 m Max. flow rate: 10 L/min Weight: 9.5 kg Dimensions (L x W x H): 49 x 27 x 38 cm Safety features: - Compressor overvoltage protection - Water flow error alarm - Exceeded temperature limit alarm The listed price is NET. Shipping costs are not included. Attention! The product is a return, visible dents and bruises. No warranty.

Stanje: rabljeno, Electric motor, three-phase motor Psdpfxodwf Tio Agxepr - Power: 0.37 kW - Speed: 2725 rpm - Shaft: Ø 14 x 30 mm - Mounting type: B3 - Protection class: IP 55 - Dimensions: 235/133/H180 mm - Weight: 7 kg