Compactsystem Martina 350 nakup rabljenega (6.757)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm Lhodpfxsvz Hqye Akhjn - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Leto izdelave: 2017, stanje: rabljeno, obdelava tanke mase Lhjdpfx Akonwm R Nehsn - dolžina izrezov od 1300 do 4500 mm - premer debla od 130 do 350 mm - 100 m³ / izmena - skupna priključna moč 230 kW.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, prva registracija: 08/2011, Oprema: ABS, Mercedes CLS 350 AMG Sayl Letnik: 06/2011. Vozilo ima popolnoma obnovljen zadnji del z novimi nosilci, nov turbopolnilnik, avtomatski menjalnik je bil očiščen in vsi filtri ter zavore so bili zamenjani. Sprednji spojler je nov, izveden je tudi poseben lifting! V vozilo je bilo vloženo približno 20.000 evrov, vozi se odlično in ima veliko moči! Z veseljem vam omogočim preizkusno vožnjo, da se sami prepričate! Želim dodati, da ima vozilo 322.500 prevoženih kilometrov, vendar je v odličnem stanju! Še vedno lahko brez težav prevozi še tristo tisoč kilometrov! Poraba: 5-12 litrov dizelskega goriva! Za dodatna vprašanja me lahko kadarkoli kontaktirate! Lhodpfxjd Tt Amj Akhon Želim vam vse najboljše!

Stanje: rabljeno, Leto izdelave: 2017, obdelava šibke mase - dolžina izrezkov od 1300 do 4500 mm - premer hloda od 130 do 350 mm Lhodjnqzkpepfx Akhsn - 100 m³ / izmena proizvodnje - skupna priključna moč 230 kW

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg Lhjdjvz Hqmepfx Akhjn - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW Lsdjvz Hqtepfx Akhshn - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Lodpfx Akovz Hq Tohjhn Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW Lhodpsvz Hhxjfx Akhsn - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm Lhjdpfx Ajvz Hqgskhen - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa Lsdpevz Hq Hjfx Akhohn - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Leto izdelave: 2000, stanje: rabljeno, Punching machine Edel Lsdpfxog Dgyxe Akhjhn HM 35/350 BKE 200/5 Maximum pressure: 35 t Sheet thickness: 5 mm at 40 kp/mm²

Leto izdelave: 2012, stanje: dober (rabljeno), največja višina reza: 350 mm, Neva Orbit Plus Ledpsz R Uvxefx Akhehn 350 mm, opremljena z različnimi žagami in brusilnimi stroji.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, številka stroja/vozila: 623 030, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 10.000 m³/h, vakuum na sesalni strani (maks.): 350 mbar, sesalna zmogljivost: 6.927 m³/h, premer sesalne cevi: 350 mm, filtrirna površina: 50 m², raven hrupa: 69 dB, vrsta aktuacije: pnevmatičen, skupna dolžina: 3.920 mm, skupna širina: 1.610 mm, skupna masa: 1.160 kg, SCHUKO Vacomat XP TWIN 350 Lhodpfx Akez Rmkmjhsn

Stanje: rabljeno, Leto izdelave: 2007, premer žaginega lista: 350 mm, Nagib rezila -45° / +45°. Največja razdalja primeža 180 mm. Največja dolžina 385 mm. Premer diska 350 mm. Hitrost vrtenja rezila 1700 / 3400 vrt./min – 2 hitrosti. Stroj izvira iz likvidacije podjetja. Po vklopu delujejo vse osi, stroj se umerja, rezilo deluje pri dveh hitrostih. Ledpsywvrqefx Akhehn Za programiranje stroja nisem usposobljen, zato samodejna funkcija rezanja ni bila preizkušena. V kompletu je še več dodatnih diskov za različne materiale. Stroj se nahaja na Poljskem – 33350. Ogled je možen po predhodnem dogovoru. Naše podjetje je 120 km oddaljeno od letališča Kraków (KRK). Možen prevoz. Cena za izvoz.

Stanje: rabljeno, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MKZ2024P017, število kartuš s črnilom: 4, barvni kanali: 4, število tiskalnih glav: 2, loèitev (maks.): 1.600 DPI (pik na palec), širina papirja (min.): 50 mm, širina papirja (maks.): 350 mm, višina papirja (min.): 500 mm, največja višina papirja: 500 mm, leto zadnje generalne obnove: 2024, vrsta vhodnega toka: Enosmerni tok, vhodni tok: 220 A, The X350 offers a practical solution for high-volume digital roll to roll printing needs. It combines speed, versatility, low ink costs, and a compact design to fit into any production environment efficiently. With a capability of up to 45 meters per minute and a media handling breadth of 350mm for both roll diameter and width, it’s equipped to manage various printing tasks with ease. The X350 is designed for straightforward integration into production lines, requiring less than 1 sqm of space. Lhedpfx Akeznazhjhon Ideal for printing on a range of materials, including die-cut and continuous labels, as well as flexible packaging, the X350 aims to support a variety of product applications without compromising on print quality or operational efficiency. Discover how the X350 can fit into your workflow and help meet your printing demands in the details below.

Stanje: rabljeno, Leto izdelave: 2020, Nazivna moč: 29,8 kW Pretok zraka: 2400 m³/h Globina kurišča: 580 mm Dimenzije vrat za vstavljanje goriva: 330 mm x 330 mm Prostor za ogrevanje: pribl. 600 m³ Površina za ogrevanje: pribl. 120 m² Potrebna površina: pribl. 600 mm x 800 mm x 1900 mm Teža: 230 kg Premer dimnika: 160 mm Izstop za toplo zračno cev: 2 x 200 mm Lhjdpfx Ajz A Eapjkhsn Načini delovanja: avtomatski in ročni Premer dimnika (orientacijska vrednost): 200 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), vhodna napetost: 400 V, vhodni tok: 22 A, vrsta vhodnega toka: trifazni, volumenski pretok: 6.920 m³/h, vakuum na sesalni strani (maks.): 2.630 mbar, sesalna zmogljivost: 8.000 m³/h, premer sesalne cevi: 350 mm, skupna masa: 825 kg, Oprema: CE označba, dokumentacija / priročnik, Ponujamo zelo dobro ohranjeno stacionarno odsesovalno napravo FELDER RL 350, letnik 2023, vključno z vsemi cevmi in drsniki. Serijska številka: 35.03.120.23 Nazivna napetost: 400,0 V Število faz: 3 Nazivni tok: 22,0 A Nazivna moč: 11,0 kW Leto izdelave: 2023 Premer odsesovalnega priključka: 350 mm Lsdsytq Dxjpfx Akhjhn Hitrost motorja: 2900 o/min Nazivni volumski pretok (pri 20 m/s): 6920 m³/h Podtlak pri nazivnem volumnem pretoku: 2630 Pa Teža: 825 kg Predvarovalka: 32 A vključno z dušilcem zvoka 5 elektropnevmatskih drsnikov in krmiljenje Sistem za gašenje Če imate dodatna vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, delovna širina: 350 mm, skupna dolžina: 1.050 mm, skupna širina: 1.800 mm, skupna višina: 1.600 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, Ta rabljena enovalna valjčna naprava je primerna za nanašanje premazov na lesene obdelovance in se lahko uporablja za oksidativna olja in (UV-) zaključne premaze. Naprava se pogosto uporablja kot del UV-oljne linije, lahko pa se uporablja tudi samostojno za različne namene zaključne obdelave. Naprava je opremljena z dozirnim valjem in aplikacijskim valjem premera 550 mm, pri čemer je hitrost obeh valjev nastavljiva neodvisno drug od drugega. To omogoča natančno prilagajanje količine nanesenega izdelka glede na želeno končno obdelavo in vrsto premaza. Oba valja sta tudi nastavljiva po višini s pomočjo ročnih koles in sta opremljena z strgali. Lode Aa Ab Sspfx Akhehn Integrirani transportni trak širine 400 mm zagotavlja enakomerno prenašanje obdelovancev in prispeva k dosledni obdelavi. Naprava se dobavlja skupaj z enim valjem in dodatnim valjnim jedrom. Vključena je tudi nova črpalka. Ta posebna naprava se ponuja kot rabljena in je na voljo takoj. Za dodatne informacije, tehnične specifikacije ali fotografije nas lahko kontaktirate.

Stanje: novo, Naprodaj profesionalni močnostni krmilnik (tirostrski) Advanced Energy iz serije Thyro-A. Naprava je NOVA – nikoli uporabljena (skladiščno ohranjena). Industrijska oprema visoke kakovosti, primerna za napredne proizvodne instalacije. 🔧 Tehnični podatki: Proizvajalec: Advanced Energy Model: Thyro-A 3A 400-350 HF RL3 Napetost: 400 V Tok: 350 A Izhod: Relay Out 4A / 250V Tip: tiristorski (SCR) krmilnik ⚙️ Uporaba: industrijske peči grelni sistemi industrijska avtomatizacija močninsko upravljanje v proizvodnih linijah 📦 Komplet vsebuje: 3x modul Thyro-A Lhsdsz Sl Aljpfx Akhon industrijsko ohišje / hladilnik hladilni ventilator komplet kot na slikah ✅ Stanje: NOVO – neuporabljeno Možne minimalne sledi skladiščenja. Popolnoma delujoč.

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA: 6913 TEHNIČNE LASTNOSTI - širina gosenice: 360 mm - širina valja: 350 mm - maks. premer diska: 350 mm - premer luknje diska: 80 mm - maks. višina reza: 120 mm od zgoraj: - zapah - vlečni valj, ozobljen - zapah - gladki drsni valj - valj z žagami - drsni, pritiskalni valj od spodaj: - 2 drsna valja pred mizo - vodilo - zapah - gosenica Lhjdpfx Akszu R H Iohsn - centralno mazanje gosenice - električno dvigovanje valja z žagami - električno dvigovanje ohišja - neskončno reguliranje hitrosti podajanja - motor za podajanje, približno 2,5 kW - glavni motor, 30 kW - skupne dimenzije (dolžina/širina/višina): 2500x2300x1900 mm - teža, približno 4000 kg PREDNOSTI – češka proizvodnja – 2 drsna valja na mizi – večnamenska žaga, rabljena – zelo dobro stanje Neto cena: 31900 PLN Neto cena: 7419 EUR Neto cena izračunana po menjalnem tečaju 4,30 PLN/EUR (pri večjih nihanjih tečaja se cena lahko spremeni)

Stanje: rabljeno, Leto izdelave: 2016, Rabljen stroj Letnik proizvodnje: 2016 Ledpfo Ad Rnzex Akhehn Oprema in tehnični podatki: - Naprava za obdelavo odpadkov, sestavljena iz: 1 čistilne naprave z briketirno stiskalnico JP 350-L 1 čistilne naprave z rotacijsko zaporo JZ 350-L - Tehnični podatki čistilne naprave z briketirno stiskalnico JP 350-L: Premer sesalne odprtine 350 mm Nominalni pretok 6580 m³/h Maksimalni pretok 8000 m³/h Podtlak pri nominalnem pretoku 2750 Pa Moč motorja 11 kW Nominalna hitrost 3000 vrt/min

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 150 kg, dolžina brušenja: 500 mm, premer brusilnega koluta: 455 mm, premer brušenja: 300 mm, teža obdelovanca med konicami: 150.000 g, vrsta vhodnega toka: trifazni, premer obdelovanca med konicama: 500 mm, širina brusilnega kolesa: 75 mm, največja hitrost vretena: 500 obr/min, hitrost vretena (min.): 10 obr/min, moč motorja brusilnega vretena: 7.500 W, skupna masa: 4.600 kg, Predstavitvena CNC krožna brusilka, pripravljena za avtomatizacijo Proizvajalec: OKAMOTO Model: OGM-350 P NCIII Letnik: 2020 Nadzorni sistem: Fanuc Oi Model D Število delovnih ur: približno 200 ur Tehnični podatki: Maksimalni premer obdelovanca: 320 mm Maksimalna razdalja med centri: 500 mm Maks. premer obdelovanca, ki ga je mogoče brusiti: 300 mm Maks. teža obdelovanca med centri: 150 kg Maks. teža obdelovanca (prirobnica + vpenjalna glava + obdelovanec): 40 kg Brusni disk: Premer x širina x premer luknje: 455x75x127 mm Hitrost vrtenja diska: brezstopenjska Obodna hitrost: 45 m/s Brusni vretenčni nastavek (os X): Maksimalni hod: 300 mm Kotni hod: nepremičen Miza za obdelovance (os Z): Hod: 870 mm Kotni hod: 0 – 10 ° Vretenčni nastavek za obdelovance: Izvedba: fiksna/sinhrona Vpenjalni stožec: MK 4 Premer vretenčne luknje: 20 mm Hitrost vrtenja vretena: 10 – 500 min⁻¹ Kotni hod: nepremičen Podporni nastavek: Tip podpornega nastavka: ročno nastavljiva konična glava Hod glave: 30 mm Vpenjalni stožec: MK 4 Moč pogona: Pogon brusnega diska: 5,5 kW Skupna priključna moč: 20 kVA Dimenzije/teža: Lhodpfx Ajzn U S Iskhon Dolžina x širina x višina: približno 3400x2330x1950 mm Teža stroja: približno 4.600 kg Standardna oprema: Trdo kovinska konična glava: 2 kos Celotna tipkovnica FANUC z nadomestkom za polmer za ustvarjanje programov ISO Delavniška programerska grafična programska oprema za brusilne in finišne cikle s funkcijo učenja Eliminator vrzeli Pozicioniranje ramena Stalno hlajenje mize LED luč Dokumentacija Izravnalni vijaki in oporne plošče Komplet orodij za upravljanje Dodatna oprema: Priprava za avtomatizacijo Samodejne vrata Vmesnik za avtomatizacijo Popolna zaščita brusnega diska pri odprtih vratih Drugo: Signalna luč Podporni nastavek z električnim povratkom glave Prirobnica: 1 kos Brusni disk: 1 kos Filtrirni sistem: na zahtevo (filtrirni sistem s papirnatim trakom: 7.000 EUR) Naprave za vpenjanje: na zahtevo Zagon in usposabljanje: na zahtevo (za zagotavljanje garancije je zagon pri Okamoto nujen) Transport: na zahtevo Stroj bo popolnoma pregledan s strani proizvajalca OKAMOTO in dostavljen s protokolom o preverjanju geometrije. Proizvajalčeva garancija: 12 mesecev za dostavo znotraj Evropske unije in ob pogoju, da podjetje T-Rade Service GmbH izvede zagon (zagon je neobvezno v Nemčiji: 7.900 EUR, v EU: 9.800 EUR)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 1.680 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 7.003 mm, skupna širina: 1.920 mm, skupna višina: 2.300 mm, skupna masa: 2.710 kg, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, Stroj za navpično brušenje stekla s 8 brusilnimi diski skupno število delovnih metrov: 45716 minimalna višina obdelovanca: 35 mm debelina stekla: 3–40 mm hitrost: 0,5–5 m/min teža obdelovanca: 200 kg/m Ljdjz N Dk Uopfx Akhohn moč: 20 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: AK26-015, število kartuš s črnilom: 8, skupna dolžina: 4.400 mm, skupna širina: 4.400 mm, skupna višina: 1.820 mm, vhodna napetost: 380 V, skupna masa: 4.400 kg, višina izdelka (maks.): 50 mm, Oprema: dokumentacija / priročnik, hladilna enota, Hybrid UV inkjet printer for rigid and roll materials. Print resolution: 1200 dpi Drop modulation: Binary, Greyscale Number of colors: 6 colors - CMYK Lc Lm Additional white ink printed as underprint before color inks All colors cured using LED lamps Ljdpfx Asqlahtjkhehn Printhead droplet size: 7-14-21 picoliters Maximum material thickness: 50 mm Maximum print width for rigid materials: 3,500 mm Capability to print two boards side by side simultaneously Output table for rigid materials, length: 2,200 mm Maximum print width for roll materials: single roll 3,470 mm, two rolls side by side 1,625 mm Maximum roll material weight: 350 kg Maximum roll diameter: 350 mm Media loading/unloading supports for two rolls up to 3,470 mm length each

Stanje: rabljeno, Technical specifications: Track width: 350 mm Maximum cutting height: 200 mm Maximum saw blade diameter: 300 mm Infinitely variable feed adjustment Automatic lubrication system Anti-kickback protection Extraction port: 2 x 220 mm Safety switch Upper shaft motor power: 55 kW Lhjdpfeichkcox Akhsn Lower shaft motor power: 55 kW Power supply: 380 V Motor speed: 2800 rpm Manufacturer: A.Costa Overall dimensions: Length: 2700 mm Width: 2220 mm Height: 1650 mm