Holzher 1401 nakup rabljenega (159)

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating mode: hot/cold process, one-sided left Edging thickness: 0.4 - 8 mm Edging height: max. 51 mm Workpiece dimensions: - Width min. 50 mm - Length min. 180 mm - Thickness min. 6 mm Feed speed: approx. 11 m/min Glue application via slot nozzle End trimming Flush trimming – tiltable up to 15 degrees Buffing unit Compressed air requirement: 6 bar Machine length: 3750 mm Knjdpfx Ahjbahd Eo Aef

Stanje: rabljeno, Holz Her Sprint 1317-1 FÜ + PU Heavy-duty model – edge thickness 0.4 - 5 mm PLC screen control Large LCD display Pre-milling unit for jointing before the glue application section Fully automatic edge magazine for rolls and strips Glue application unit for cartridges and PU gluing Maximum edge height: 51 mm Automatic glue height adjustment Pressure unit 1913 motorized pneumatic End trimming unit for rolls and strips With pneumatic adjustment for 0-10° angle of the end trim saws Multi-function milling unit 1942 MOT 2 Milling unit with motorized positioning axes for processing various radii – chamfers – flush trimming via PLC Corner copying milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm Scraper unit for chamfers and radii Knedpjx It Hmsfx Ah Ajf Pneumatic infeed and outfeed Finish – flat scraper Regular maintenance by Holz Her Machine is FACTORY SERVICED in TOP CONDITION Available from stock in Lieboch

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 4.300 mm, največja širina rezanja: 4.250 mm, Prisilna prečna žaga Holz-Her ZENTREX 6215 Power, s povezavo na skladišče Dolžina reza 4300 mm Širina reza 4250 mm Izstop žaginega lista 115 mm Glavni motor 15 kW, predrezilo 2,2 kW Premične podporne mize Odsesovalni paket Clean Protection & Dust Control Laserski indikator – prepoznavanje širine traku Inteligentne vpenjalne klešče za obdelovanec Knsdpox Id U Iofx Ah Aef Preklopni pritisk vpenjalnih klešč Sistem zapiranja reže reza Ročni upravljalnik Tiskalnik etiket Programska oprema in drugo...

Stanje: rabljeno, Leto izdelave: 1994, Debelina robnega traku: 0,3 - 20 mm, maksimalna višina traku: 66 mm, minimalna dolžina traku: 200 mm. Minimalna širina obdelovanca: 60 mm, minimalna dolžina obdelovanca: 140 mm, debelina obdelovanca: min. 6 mm, maks. 60 mm. Podajanje 8 ali 16 m/min. Lepljenje z Ultra - Granupress. Odrezovanje: 2 žagi, nagibne 0 - 15°. Rezkanje, radij / na ravno, kopiranje kotov, strgalo, pnevmatsko poliranje. Lokacija skladišča: Nattheim. Kedpfxjvvkdts Ah Aenf

Stanje: pripravljen za uporabo (rabljen), Iz zaloge, podroben opis sledi Kjdpfjx Ncrbjx Ah Aenf

Stanje: dober (rabljeno), Leto izdelave: 2011, Panelna žaga HOLZ-HER Kedex Hyr Hopfx Ah Aenf Tip: 1255 Stanje: rabljeno Leto izdelave: 2011 Dolžina reza: 6300 mm (maks.) Navpična višina reza: 2200 mm (maks.) Vodoravna višina reza: 2200 mm (maks.) Debelina obdelovanca: 60 mm (maks.) Višina predreza vodoravno: višina reza Višina predreza vodoravno: 2040 mm (maks.) Napetost: 400V 50 Hz Teža: 920 kg Oprema: - Navodila za uporabo - Naslednji UVV pregled: 05/2026

Stanje: dober (rabljeno), Leto izdelave: 2018, Debelina robnega traku: od 0,4 do 6 mm Debelina obdelovanca: od 8 do 60 mm Knedpfx Aex I Sgroh Aof Skupna dolžina: 3960 mm Hitrost pomika: 10 m/min Teža: 1055 kg - Spojni rezkalni agregat z 2 diamantnimi rezkarji, višina 64 mm - Avtomatski zalogovnik trakov 1903 - GluJet 301 z zaznavno šobo - Prisilni agregat 1912-3 pnevmatski - Porezalni agregat 1918, dvomotorski - Multifunkcijski rezkalni agregat z diamantnimi rezkarji, radius poravnava r= 2 mm - Strgalo za radius - Površinsko strgalo - Izvlečna delovna podpora

Stanje: rabljeno, Holz Her Sprint 1312 FÜ + PU močna izvedba – debelina robov 0,4 - 12 mm SPS zaslonsko upravljanje Predrezkalna enota za pripravo pred lepljenjem Popolnoma avtomatski podajalnik robnega materiala za rolo in trak Lepilna postaja za kartuše + PU-lepljenje samodejna testna šoba Višina obdelovanca 6-55 mm Kap enota za rolo in trak do 12 mm debeline robu z nastavljivim naklonom kap žage od 0-10° Rezkalna enota, poravnava do 12 mm, rezkanje radijev – fazno rezkanje – 15° MOT – 4 osi Strgalska enota za faze in radije z 2 pnevmatskima nosilcema strgal pnevmatsko vklapljanje in izklapljanje Kodpfxox Eilqs Ah Aonf Površinska strgalska enota – finish Sistem za pršenje – PU Stroj v ODLIČNEM STANJU iz zaloge Lieboch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, višina obdelovanca (maks.): 60 mm, največja debelina roba: 15 mm, Holz-Her Robna lepilka LUMINA 1380 Multi PUR in EVA lepilo (do 60 mm) + NIR agregat / laserski robovi do 45 mm, kot izmenljiva postaja Spojno rezkanje IntelliSet - korekcija orodja fa.s.t. - menjava v prosti vrzeli iTronic - nadzor tlaka in količine lepila Polna motorizirana oprema vseh agregatov Knedpfxjx E A Dis Ah Ajf Multifunkcijsko rezkanje - radij 1,3 mm (2x) & 2 mm (2x) Razpršilne naprave in še veliko več... Stroj je trenutno v obnovi v tovarni v Voitsbergu / Avstrija.

Stanje: rabljeno, Leto izdelave: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Knsdpfxevvkfds Ah Ajf Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speeds: Infinitely variable feed from 12–30 m/min (depending on equipment) Features: - Adjustable infeed table in magazine area (max. adjustment range 30 mm) - Height-adjustable magazine plate for lower edge overhang adjustment - Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm - Transport chain including automatic central lubrication - Motorized, position-controlled bridge height adjustment - Pneumatic locking roller for processing shortest workpiece intervals - Extendable workpiece support (extension up to 1600 mm) - Space-saving, pneumatically controlled sliding hoods over the complete machine (deviations possible for certain units) - Motorized infeed fence - Lubrication injector for all joints and pins (including hour counter) - Central extraction connection (2x Ø 200 mm) - Integrated chip collection box at machine end (in conjunction with radius scraper unit) Control PPC 231 - Power PC for efficient setup and changeover - 15" SVGA touchscreen display - CF memory card 128 MB - On-board USB port - Ethernet network interface - On-board keyboard connector - Windows-like user interface - Plain text and/or graphic information - Rotatable, tiltable control panel at eye level - Dust-proof membrane keypad with softkeys (push buttons) - LED indicator for unit preselection - Program list with program names and numbers - Comprehensive program memory - Individual unit selection with basic settings for setpoints, positions and tool corrections as well as fixed position points - Setup processes for units and axis adjustments centrally and clearly via fine adjustment (depending on equipment) - Interval display for shortest workpiece distance - Integrated distance control; positions controlled globally and/or program-specific - Comprehensive and complete operating data acquisition - Service messages in plain text - Diagnostic system - Integrated synchro-bus system for high-precision unit control - Individual management for up to ten users including password protection - Online maintenance (optional), data exchange with HOLZ-HER service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 - belt bridge Options and accessories for the base machine: Spray unit 1856 for entry and exit section: For infeed: Electronically controlled parting agent spray unit with Riepe-LPZ/II parting agent For outfeed: Electronically controlled cleaning agent spray unit with Riepe-LP163/93 cleaning agent (only in conjunction with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) With two electronically controlled cutter units - 1 unit counter-rotation - 1 unit co-rotation - 5 mm plunge depth - Static frequency inverter 200 Hz - Without router tool - With ProLock quick-change tool holder Tooling for 1803 (workpiece height up to 60 mm) Diamond cutters PRO UT, 2 pcs (front and rear), incl. protect. hoods Ø 100–63, Ø 30 mm, Z = 3 + 3 + 3, 1 left-hand, 1 right-hand Noise-reduced cutters with integrated chip guidance DFC technology (Leitz system) Max. chip removal: 2 mm at 60 mm workpiece height [Text continues] If you need the rest of the translation or a tailored summary, please let me know.

Stanje: rabljeno, Rabljeni stroj Kedpfx Ahowka Ngj Aenf Stanje: primerno starosti, primeren le za grobo rezanje Tehnični podatki: - Dolžina reza pribl. 5300 mm - Višina reza pribl. 2200 mm - Globina reza pribl. 80 mm - Maks. premer žaginega lista 300 mm - Moč motorja 4 kW Razpoložljivost: takoj Lokacija: 63934 Röllbach

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno),

Stanje: rabljeno, Leto izdelave: 2014, • motorizirano nastavljanje pritisne letve Knsdpfjx Huhcsx Ah Aef • Električni sustav za beskonačno podešavanje pomaka, 400 V / 50 Hz, 2,2 kW • „Upravljanje PPC 221 – s 8,4'' VGA kolor zaslonom” Visokoučinkovita upravljačka jedinica s vrlo jednostavnim rukovanjem • Jedinica za predfrezanje rubova 1802, 400 V (2 x 2,0 kW, 200 Hz, 12.000 o/min) s 2 freze za predfrezanje rubova ploče • Glodalo, dijamant Ø 70 x 64 x 30 mm, Z2, lijeva rotacija za jedinicu za predfrezanje 1801 / 1802 • Glodalo, dijamant Ø 70 x 64 x 30 mm, Z2, desna rotacija za jedinicu za predfrezanje 1801 / 1802 • Jedinica za ulaganje ruba 1903 SYNCHRO automatski transport rolne i trakastog materijala • Stanica za nanošenje ljepila Glu Jet GJ301 automatska (2,3 kW, 50 Hz) • Pristiskivač 1913 pneumatski prvi valjak pogonjen, 2 dodatna pritisna valjka s pojedinačnim pneumatskim upravljanjem • Odsječna jedinica 1918 (60 mm) pneumatska (2 x 0,45 kW, 12.000 o/min) pneumatski zakretna 0/10° • Multifunkcijska jedinica za glodanje 1827 pneumatska (2 x 0,65 kW, 200 Hz, 12.000 o/min) • Vertikalni valjci za praćenje ručni ručno podešavanje vertikalnog valjka za praćenje u koracima od 0,1 mm za obradu prevjesa ruba, npr. kod plastičnih rubova • Glodalo, dijamant Ø 56 / 60 mm, Z = 2, R = 2,0 mm, lijeva rotacija Dijamantno premazan, puni alat s CM tehnologijom (LEUCO sustav), s integriranim odvodom strugotine, patentiran ProLock-E • Glodalo, dijamant Ø 56 / 60 mm, Z = 2, R = 2,0 mm, desna rotacija Dijamantno premazan, puni alat s CM tehnologijom (LEUCO sustav), s integriranim odvodom strugotine, patentiran ProLock-E • Jedinica za kopiranje kutova 1832 (1 x 0,35 kW, 200 Hz, 12.000 o/min), za debljinu ruba do 3 mm • Glodalo, dijamant Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, s CM tehnologijom (LEUCO sustav), s integriranim odvodom strugotine, za profilirnu jedinicu 1832 • Strugač 1929 pneumatski uključujući pneumatsko podešavanje (zasebno za gornji i donji dio) • HW reverzibilni noževi za držač strugača 1929 / 1927 R = 2,0 mm (potrebna 2 komada) • Jedinica za ravno struganje 1964 Uklanjanje ostataka ljepila za čist spoj ljepila. • Polirna jedinica 1940 (2 x 0,12 kW, 50 Hz, 1400 o/min) Za završno čišćenje i poliranje ruba. Sa 2 tekstilna diska, zakretni raspon 0–5°

Stanje: rabljeno, Holz Her STREAMER 1057 XL FÜ + PU Tloušťka hrany 0,4 – 6 mm Knsdpfx Ahjx Aqx Tj Aof Moderní ovládání s přepínačem pro nastavení agregátů Automatický zásobník hran pro rolovaný i pásový materiál Lepicí stanice GLU-JET pro kartuše + PU lepení Nanášení lepidla pomocí tryskové technologie Snímací tryska Výška obrobku 6–60 mm Automatické nastavení výšky lepidla Vysoce kvalitní tříválcový přítlačný mechanismus, první válec motorizovaný Ořezávací agregát pneumatický, pro rolovaný i pásový materiál do 6 mm tloušťky hrany S pneumatickým nastavením úhlu kapovacích pil od 0° do 10° Frézovací agregáty – začišťovací frézování do 6 mm, rádiusové frézování – zkosení – 15° Kopírovací agregát rohů – do 3 mm tloušťky hrany Stírací agregát pro fáze a rádiusy se dvěma držáky stíracích nožů Plošný stírací agregát – finální povrchová úprava Lešticí agregát Stříkací zařízení v oblasti vstupu a výstupu, stejně tak pro PU Stroj se všemi obráběcími nástroji Stroj je dílensky odzkoušen Skladem v Liebochu

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 4.600 mm, širina obdelovanca (maks.): 2.200 mm, višina obdelovanca (maks.): 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Holz-Her 5-axis nesting machining center DYNESTIC 7535 Working area: 4600 x 2200 mm. Vector speed: 128.0 m/min. The milling spindle has a power output of 13.0 kW (S6) and accommodates tools up to a maximum diameter of 350 mm via an HSK interface. Drilling unit with 24 spindles, comprising 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head is equipped with an integrated saw unit for a saw blade with a maximum diameter of 125 mm and a maximum width of 4 mm. Knedpfx Aox E Ah Ieh Asf 18-position rotary tool changer, pneumatically liftable with a cover to protect the HSK 63F holders, as well as a single-position pick-up changer for a saw blade with up to 350 mm diameter. Pneumatically retractable stops integrated into the table for special machining on the nesting table or for use with vacuum pods. 750 m³/h vacuum capacity, divided across 2 pumps with 500 m³/h and 250 m³/h respectively, intelligently managed via ECO-VAC software. The table features a 16-zone vacuum system for focused vacuum application. The pre-installed push-off unit is connected to the extraction system and can be used to clean panels and/or the nesting table.

Stanje: rabljeno, Lokacija skladišča: Nattheim Kodevvkrdepfx Ah Aonf

Stanje: rabljeno, Leto izdelave: 2003, Used machine Year of manufacture: 2003 Equipment and Technical Data: - Control unit with LCD display - Swiveling control panel - Program memory - Manual pressure beam adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond joint cutters, both climb and counter-rotation Edge magazine 1903: - Support disc 820 mm, max. loading capacity 40 mm - Automatic feeding of roll and strip material Glue application system 1906: - Cartridge system with sensing nozzle - Automatic reloading - PUR adhesives can be used Pressure unit 1816: - With driven roller - Pneumatic control of pressing system End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Kedowka Nyspfx Ah Asnf Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Application-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness roll material: 3 mm Edge thickness strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance to workpiece support: 470 mm Support disc Ø for edge material: 800 mm End trimming knives for rolls up to: 3 mm Heating time: 3.5 min Joint cutter power: 2 x 2 kW End trim saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction connection jointing unit: 120 mm Extraction connection milling unit: 70 mm Extraction connection scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Leto izdelave: 2004, Stanje: rabljeno,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 2.200 mm, 3-osni elektromandrel Menjalnik orodij z 8 pozicijami Knodpfx Aox Iwn Uoh Asf Vrtalna enota z 10 navpičnimi in 6 vodoravnimi vreteni 3 vakuumske črpalke Etiketirni stroj

Stanje: rabljeno, Holz Her UNO 1303 + PU Debelina roba 0,4 - 3 mm (6 mm) Upravljalna plošča s preklopnimi stikali za nastavitev enot Popolnoma avtomatski podajalnik robnega traku za kolutno in trakasto blago Postaja za nanašanje lepila: kartuše + PU lepljenje Višina obdelovanca 6-55 mm Pnevmatska pritiskalna enota Odtirna enota za kolutno in trakasto blago do 3 mm (6 mm) debeline roba S preklopom od 0-10° naklona žage Rezkalna enota, ravnalno rezkanje, rezkanje radijev, posnemanje robov do 15° Kedpfx Ajxlz Nzeh Aonf Strgala za posneme in radije Površinsko strgalo – za končno obdelavo Stroj je PREGLEDAN v ODLIČNEM STANJU iz izredno dobro vzdrževane obrtne delavnice Na voljo iz zaloge Lieboch

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 4.580 mm, širina obdelovanca (maks.): 1.650 mm, višina obdelovanca (maks.): 300 mm, premer orodja: 350 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machining Center 7235 Demonstration Machine Machining area: 4580 x 1650 mm, maximum workpiece size for edge routing (minus cutter radius). Maximum panel width: 1,660 mm, maximum workpiece height: 300 mm. Easy and quick suction cup positioning with the Holz-Her VI.SE LED table. The various colored LEDs display the positions of the consoles and suction cups, including the rotational angle for rotatable cups. 8 consoles, each equipped with 2 suction cups, and electronic stop monitoring. The routing spindle delivers 13.0 kW of power and accommodates routing tools with a maximum diameter of 200 mm via an HSK interface, as well as saw blades up to 350 mm—ideal for heavy-duty machining, such as solid wood applications. 35 drilling spindles: 25 vertical and 10 horizontal. Two saw units each in X and Y axes, for saw blades up to 125 x 4 mm. 24-position disc tool changer and 14-position pick-up changer, plus a single-blade magazine for 350 mm saw blades, provide maximum flexibility in tooling. Kodpfxex E Afmj Ah Aenf Safe Detect – safety monitoring system instead of safety mats or light barriers. Integrated waste transport conveyor in the machine base. And many other features.

Stanje: rabljeno, Leto izdelave: 2011, Teža: ca. 4500 kg Skladišče: Nattheim Kjdevvi R Espfx Ah Aenf

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, pogonska enota žage: 3.000 W, Holz-her 1220 avtomatska stoječa krožna žaga za plošče. Kodsx Eyqyepfx Ah Ajnf Več možnosti nastavitve, rezanje polovice ali cele plošče. Možen preizkus, deluje dobro.

Stanje: rabljeno, Leto izdelave: 2006, EVA lepljenje z 2 pritisnima valjema, kap postaja, predrezkar in zaoblitveni rezkar, strgalo za površine, pogonska naprava. Lokacija skladišča: Nattheim Kodsvvkg Iopfx Ah Ajnf

Stanje: rabljeno, Leto izdelave: 2009, automatic central lubrication milling unit 7833, 2-stage, 11 kW power, 1,000 - 24,000 rpm; 1 double drilling spindle in X direction; 1 integrated saw unit for sawing/grooving in X direction, traversing; tool changer 7892, 16-position linear pick-up changer, permanently installed on the right side of the machine; laser pointer set: 2 laser pointers for positioning the vacuum cups or referencing the workpiece contour; automatic console and vacuum cup positioning; 6 consoles incl. 3 vacuum cup mounts per console, incl. 1 vacuum cup 80x80 mm per mount; incl. 4 loading aids; additional processing zones at the front for 6 consoles; base unit pneumatic system for frame clamping system 7974 (6 consoles); 2D barcode scanner; video camera in the machining head; vacuum pump 140 m³/h; Vario tool change unit package consisting of: vector axis 7899 (C-axis) fully interpolating, 0-360° infinitely rotatable, incl. pneumatic tool changer 7890, single-position magazine, pick-up system, fixed installation in front of the machine frame on the left; tool changer 7894, 6-position pick-up magazine especially for Vario tool change tool holders, fixed installation in the left side of the machine frame, can be equipped with collet chucks Vario Grip KSJ F 40, 3 pcs. tool holders Vario Grip KSJ F 40 (for collets 2-20 mm ER32), 1 pc. saw blade adapter, 3 pcs. collets per customer selection, 1 pc. carbide circular saw blade max. 220 mm diameter. Location: Nattheim Ksdpfxjvvi Spo Ah Aonf