Homag Baz 722 nakup rabljenega (489)

Stanje: dober (rabljeno), Leto izdelave: 2008, številka stroja/vozila: 0-201-21-4348, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, potovalna razdalja osi X: 5.800 mm, pomik osi Y: 1.600 mm, pomik po osi Z: 600 mm, dolžina obdelovanca (maks.): 5.860 mm, širina obdelovanca (maks.): 1.600 mm, proizvajalec krmilnikov: HOMATIC, skupna višina: 2.950 mm, skupna dolžina: 11.500 mm, skupna širina: 7.500 mm, model krmilnika: PC85, moč vretenovega motorja: 7.500 W, Oprema: dokumentacija / priročnik, HOMAG BAZ 722/58/K 4-axis CNC gantry machine with 2 shuttle tables and edge banding unit Year of manufacture: 2004 NOTE: The main spindle and machine PC were replaced approximately 2.5 years ago. Workpiece length X max. (with edge banding unit) - max. 5660 mm in single operation - max. 2680 mm in pendulum operation Kwjdpfxswpb Nfe Adkow Workpiece length max. (Cutter D=25mm) - max. 5860 mm in single operation - max. 2870 mm in pendulum operation Workpiece width Y max. - max. 1300 mm – all units - max. 1400 mm – with edge banding unit - max. 1520 mm – with milling operation D=25 mm EQUIPMENT / SPECIFICATIONS Console table / Vacuum system - 2 independently operating shuttle tables in Y-direction (2 Y-axes) - Both shuttles can be operated synchronously for machining large workpieces (single operation) - 6 adjustable consoles per shuttle (total 12), each with 1 longitudinal stop at the front Each console with a lifting rail attached laterally - Console length: 1340 mm - 3 retractable side stops: 2 left, 1 right (mirror) - Approx. 20 vacuum blocks 160x140 mm - 2 vacuum pumps, capacity 100/140 m³/h, 1 each for left and right field Milling spindle / Units / Tool changer - Main spindle 7.5 kW (S6/S1 mode), n max = 18,000 rpm, vector-controlled HSK F63 tool holder Liquid cooling with temperature monitoring NOTE: The main spindle was renewed in 2021. - C-axis with aggregate interface - Auxiliary spindle with fixed edge banding unit (own X- and C-axis), 360° edge banding, with butt gluing - Double edge roll magazine with automatic edge change - Fixed drilling head with 12 vertical spindles (individually callable) / 6 spindles in X, 7 spindles in Y direction, Drive motor 4 kW, 4500–6000 rpm - 18-position tool changer (carousel type) - Saw and trim unit for tool changer - Drilling and milling unit with 4 spindles (2 x X, 2 x Y direction) - Combination flush trimming and scraper unit Chip removal / Safety / Miscellaneous - Chip conveyor inside the machine body - Safety fence on the left and right sides, 1 door with safety interlocks - Extraction connection Control / Software: • PowerControl PC85 operating system NOTE: Both machine computers were replaced in 2020. • WoodWop 5.0 • Woodscout • Power supply 400 V, 50/60 Hz • Cooling unit for control cabinet • Laser positioning system Mr. BEAM Machine dimensions (occupied area after assembly) L 1150 x W 700 x H 290 cm Availability: Immediately

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Oprema: CE označba, dokumentacija / priročnik, HOMAG Optimat BAZ 722/42/16/K Portalni CNC stroj z 2 izmenjevalnima mizama Vključene opcije: Kwjdpfjyq Nkrjx Adksw 2 vakuumski črpalki Laser za pozicioniranje delov Vakuumske blazinice Transporter za odpadne dele

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.800 mm, pomik po osi Z: 380 mm, število osi: 5, Ta 5-osni HOMAG PROFI BOF 722/58/18/F/K je bil izdelan leta 2005 in ima delovno območje X = 6000 mm, Y = 1800 mm in Z = 380 mm. Opremljen je s 5-osno vilicasto glavo, obnovljeno leta 2019, ter dvema premikajočima se menjalcema plošč, vsak z 18 mesti. Idealna izbira za napredno obdelavo lesa – razmislite o nakupu tega CNC obdelovalnega centra HOMAG PROFI BOF 722/58/18/F/K. Za več informacij o tej stroju nas kontaktirajte. Kedpfxsx D Hxfj Adkoww

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, številka stroja/vozila: 0-201-22-3325, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 5.800 mm, širina obdelovanca (maks.): 1.200 mm, model krmilnika: Homatic-CNC System PC83 mit Windows NT 4.0, hitrost pomika os X: 80 m/min, največja hitrost vretena: 18.000 obr/min, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item punctually on 20.03.2026! 4-axis CNC machining center for drilling, milling, edge banding, and finishing: Saw and crosscutting unit for tool changer Drilling and milling unit (4 spindles) for tool changer Combined flush/radius milling and finishing unit for tool changer Air nozzle for workpiece edge for tool changer Attention: The scope of delivery includes only the units mentioned above. No vacuum suction cups, tools, or tool holders—possibly shown in the pictures—are included! TECHNICAL DETAILS Console clamping table "K": 12 movable consoles for holding vacuum cups with longitudinal and side stops, 4-fold occupancy Max. workpiece length with single set-up: 5,800 mm Max. workpiece length in pendulum mode: 2,200 mm Max. workpiece width: 1,200 mm Max. workpiece thickness (with standard 100mm high suction cups) with edge: 60 mm (when dust extraction hood is in position 1) Max. workpiece thickness (with standard 100mm high suction cups) without edge: 60 mm Max. workpiece thickness (with standard 100mm high suction cups) without edge: 120 mm (when dust extraction hood is in position 2) Support equipment Drilling head: 17 vertical spindles 2x main spindle 12 kW water-cooled for HSK (speed 18,000 rpm with C-axis and 12-position disk tool changer) Separate Y-axis for 2nd main spindle plus aggregate interface with integrated pneumatics and electrics Electronic supply and swivel drive C-axis: swivel range without limitation. Edge banding unit, 360°, for changeover into right main spindle Max. edge height: 65 mm Pickup station right for glueing unit storage Kwjdpfx Adeyic Tuekew Pre-cutting station and triple roll magazine Adapter units Combined flush/radius cutting and finishing unit (profile scraper) Saw and crosscutting unit Drill-milling unit, 4-spindle (crosshead) Air nozzle for workpiece edge MACHINE DETAILS Control: HOMATIC Control PC 83 with Windows (NT 4.0) EQUIPMENT WOODWOP programming system version 5.0 Network connection Laser positioning aid Chip conveyor belt Safety: Foot mats at front, side safety guards, rear: installation against wall Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Delovno območje X: 4000 mm Delovno območje Y: 1600 mm Elektromandrel z osjo C, moč 11 kW, vpenjalo HSK 63F Glave za vertikalno vrtanje: 17 Glava za horizontalno vrtanje v križnem položaju + žaga Skupina za rezkanje in čelno obdelavo Skupina za lepljenje 360° Kombinirana skupina za obrezovanje/strganje Magazin za robni trak z 2 postajama Krožni magazin za 12 pozicij Krmiljenje: Power Control PC 85 WoodWop 7.1 (nadgradnja izvedena leta 2018, cena cca 9.500 €) Kwjdpfxsyprr Ne Adkew Delovna miza z 8 nosilci in priseski Vakuumska črpalka Elmo Rietschle Varnostne preproge Transportni trak za ostružke

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Številka stroja: 559969 Proizvajalec: HOMAG Model: PROFI BAZ 723/42/18/KC Leto izdelave: 2004 Ksdpfoxvy Ukex Adkjww Tehnični podatki: Teža pribl.: 10.000 kg Krmiljenje: PC85 Mere (d x š x v) pribl.: 39.000 x 3.200 x 3.200 mm C-os: da Programska oprema: WoodWOP Delovna dolžina X-os: maks. 4.200 mm Delovna širina Y-os: maks. 2.075 mm Glavno vreteno: 2 x 14,5 kW Izmenjevalec orodij: 2 x 18-kratni Vakuumska črpalka: 2 x 100 m³/h Enota za lepljenje robov: da, 360° Premični pomik maks. X-os: 80 m/min Premični pomik maks. Y-os: 60 m/min Premični pomik maks. Z-os: 40 m/min Opis naprave Visoko opremljen, tehnično dobro vzdrževan CNC obdelovalni center HOMAG PROFI BAZ 723/42/18/KC v portalni izvedbi z 360° enoto za lepljenje robov, 2 glavnima vretenoma s C-osjo, avtomatsko pozicioniranimi konzolami in HOMAG Optimat TBP 370 vakuumskim podajalnikom v portalni izvedbi. Prvotna cena je bila približno 620.000 EUR. Tehnični podatki in oprema HOMAG Profi BAZ 723 CNC: - Dolžina obdelovanca pri enojnem obratovanju maks. 4.200 mm - Dolžina obdelovanca s frezom Ø 25 mm za nihajno obratovanje maks. 2.040 mm - Dolžina obdelovanca pri lepljenju za nihajno obratovanje maks. 1.850 mm - Širina obdelovanca (frez Ø 25 mm) maks. 2.075 mm - Širina obdelovanca (lepljenje) maks. 1.950 mm - Širina obdelovanca (vse enote) maks. 1.850 mm - Konzolna miza KC-sistem, 2 kosa levo/desno samodejno pozicioniranje konzol in vakuumskih prijemal - Prvo glavno vreteno s C-osjo motor 14,5 kW vrtljaji 0–24.000 min⁻¹ izmenjevalec orodij 18-kratni (brez orodja, HSK držal in enot!) vrtalna glava 17 vreten navpično (7 vreten smer X, 11 vreten smer Y) vrtalna glava 4 vretena vodoravno 4-SP+Sawe 0/90 stopinj izpihovalna šoba pnevmatsko na nosilcu - Drugo glavno vreteno s C-osjo motor 14,5 kW vrtljaji 0–24.000 min⁻¹ izmenjevalec orodij 18-kratni (brez orodja, HSK držal in enot!) vrtalna glava 17 vreten navpično (7 vreten smer X, 11 vreten smer Y) vrtalna glava 4 vretena vodoravno 4-SP+Sawe 0/90 stopinj izpihovalna šoba pnevmatsko na nosilcu - Agregat za lepljenje robov 360° s čelnim stikom montiran na desni strani portala z Y-pogonom Pogon vretena s C-osjo višina roba maks. 65 mm debeljina roba 0,4–3 mm predrezalna postaja in 2-kratni valjčni magazin - Transportni trak za odvod odrezkov z izhodnim trakom (Orodja, HSK držala in agregati za izmenjevalec orodij niso vključeni v obseg dobave). Za transport razstavljenega stroja je potrebna transportna košara HOMAG. Plačilni in dobavni pogoji Dobava: iz temeljev, nepakirano Plačilo: 100 % pred nakladom Garancija: brez garancije

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, številka stroja/vozila: 0-201-09-5124, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.650 mm, model krmilnika: Homatic PC 85 Power Control, TECHNICAL DETAILS X-axis working area: 6,000 mm Y-axis working area: 1,650 mm (up to 1,750 mm for milling) Maximum travel height during edge banding: 60 mm Maximum applicable edge height: 65 mm Minimum internal radius: 30 mm Automatic tool changer: 18 positions Drilling head: 27 spindles (4 kW) Max. unit saw blade diameter: 200 mm MACHINE DETAILS Control system: Homatic PC 85 Power Control Software: WoodWop Electrospindle C vector: 11 kW, HSK F63 Edge requirements: Rolls, PVC / ABS 0.4 - 3 mm Kwedoydl Nwjpfx Adkow EQUIPMENT - 10 adjustable support rails for suction cups - Loading and unloading aid with 8 pneumatic rods - Suction cup positioning with laser system - Edge banding unit with 360° rotation, glue pot and preheater for granulated EVA glue - Rubber-coated pressure roller + additional rubber-coated pressure roller - Preheating lamp - Edge cutter and edge scraper - Edge holder magazine - Front and side protection system with mats - Surround protection grid - Chip extraction with motorized conveyor belt - Air conditioning for machine control - Automatic lubrication system - Vacuum pump

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Max. workpiece length: 3600 mm, max. workpiece width: 1400 mm, overall length: 8750 mm, overall width: 5250 mm. Kwsdpeqvnl Tefx Adkew

Stanje: zelo dobro (rabljeno), CNC MACHINING CENTER (POINT-TO-POINT) – 4 Axis (5 Axis with FLEX 5) Gantry-type machine (mobile in X-axis) Control System: Powertouch (PC85) with woodWOP software Safety enclosure for the working head Clamping table with modular K-Table consoles Consoles support arms (qty.): 8 Clamping table dimensions (mm): 1340 Automatic positioning of consoles (X-axis) LED display for programmed vacuum cup positions (Y-axis) Workpiece clamp Automatic power tool change system – POWERCLAMP Disc tool changer – magazine capacity (qty. tool stations): 18 Maximum working area (X – Y – Z): 4000 x 1550 x 60 mm Maximum working area for edging (X – Y – Z): 4000 x 1500 x 60 mm Working area – vacuum pump (capacity in m3/h): 100/140 Chip conveyor Separate electrical and control cabinet Kjdpsw Dc Nisfx Adksww Total connected load (52 A) WORKING UNITS (TOP): No. 17 independent vertical drilling spindles (High Speed 7500) No. 4 independent horizontal drilling spindles (2 on X axis + 2 on Y axis) Drilling head motor power (kW): 2.2 No. 1 vertical main spindle (milling unit) HSK 63 (kW: 15) Edge banding unit Power Edge (Y-axis), edge banding aggregate (hot melt glue + premelter) Edge material (rolls) thickness (min/max): 0.4 – 3 mm Edge magazine for rolls (1 compartment) Premilling station (cutting unit) No. 1 crossbeam unit (4 horizontal drilling spindles) No. 1 circular saw unit (diam. 125 mm) Combination unit (flush milling/profiling scraper)

Stanje: zelo dobro (rabljeno), 4-axis CNC machining center for milling, drilling, cutting, and edge banding. Gooseneck machine – safety tread mats at the front CNC control type PowerControl PC 85 (WoodWop software) 10 support/consoles (mm 1340) LEDs indicate the programmed positions of the vacuum clamps (Y-axis) Kwsdeh Ucn Rspfx Adkjw Automatic tool changer (carousel-type, 18 positions) Usable working area (X - Y - Z) mm 6175 x 1550 x 60 Usable working area for edge banding (X - Y - Z) mm 6000 x 1475 x 60 2 working zones – 2 vacuum pumps (capacity 100 m³/h) Chip conveyor for removing waste from the machining process Total connected load: 27 kW Working units (top) 17 independent vertical drilling spindles (2.2 kW) 4 independent horizontal drilling spindles 1 vertical electrospindle HSK F63 (main spindle 11 kW) 1 groove saw unit 0°-90°, diameter (mm) 125 Edge banding unit Power Edge (Y-axis), gluing unit (hot-melt glue + pre-melter) Roll material (edge) thickness (min/max) mm 0.4 - 3 Edge magazine for rolls (2 positions)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, številka stroja/vozila: 0-201-25-5219, Funkcionalnost: popolnoma funkcionalen, vhodna frekvenca: 50 Hz, potovalna razdalja osi X: 4.800 mm, pomik osi Y: 1.400 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Brez izklicne cene - zagotovljena prodaja najvišji ponudbi! Oddaja ponudbe zavezuje k pravočasnemu prevzemu do konca avgusta! Kwjdpfxsw Ekkks Adkjw TEHNIČNI PODATKI Pomiki osi Pomik X-os: 4.800 mm Pomik Y-os: 1.400 mm PODATKI O STROJU Električni podatki Napajalna napetost: 400 V Frekvenca: 50 Hz Število faz: 3 Nazivni tok: 53 A Varnostni odklopnik: 63 A Krmilna napetost: 24 V Vrsta vhodnega toka: trifazni izmenični tok OPREMA Brezstopenjsko nastavljivo število vrtljajev Robni agregat

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood Code: RU0010812 - Manufacturer Code: 1-056-08-3420 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Kwodjv Iz Ugspfx Adksw

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 4 Kedsx D Dvnspfx Adkjww Ta HOMAG Optimat BAZ41/30/K Event je bil izdelan leta 2002. Rabljeni CNC-obdelovalni center z delovnim območjem 3000 x 1050 mm. Razmislite o nakupu tega CNC-obdelovalnega centra HOMAG Optimat BAZ41/30/K Event. Kontaktirajte nas za več informacij. Vrste uporabe CNC obdelava lesa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, število osi: 4, največja hitrost vretena: 18.000 obr/min, This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It is equipped with Homatic CNC control, WOODWOP CNC programming system, an 18-position disc tool changer, and a main spindle with a 12 kW three-phase motor. The machine can process workpieces up to 3,000 mm in length and 1,400 mm in width and is fitted with a full-length table with adjustable vacuum clamps. Ask about the availability of this HOMAG PROFI BAZ20/30/16/V/D CNC woodworking center. Contact us for further details. • Control/Software: Homatic CNC controller; WOODWOP CNC programming system; Postprocessor • Workpiece capacity: • Length: 800–3,000 mm; Width: 350–1,400 mm; Max. thickness: 70 mm with edge / 80 mm milling • Minimum rail width: 120 mm; Max. weight: 150 kg • Table/clamping: • Full-length table (D-table) • Longitudinal console 1 fixed; Longitudinal console 2 adjustable manually in Y-direction • 8 vacuum clamps, 125 x 50 x 100 mm • Working height, bottom edge of workpiece: 950 mm • Unit for shifting vacuum clamps on carrier rail with pneumatic extension console (max. 4 clamps per longitudinal console) • Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console • Stop pins for laminate overhang: lifting/rotating device, max. 20 mm overlay, stroke length 110 mm, individually selectable, end-position monitored (for manual door loading) • Main spindle: • Speed range: 1,500–18,000 rpm (VFD 15 kW), full rated power from 12,000 rpm • Max. tool diameter: 180 mm (milling) / 200 mm (sanding); dust extraction for all tools/units • Unit interface/C-axis: • Pneumatic and tiltable drive interface • C-axis with torque drive and 3-point support • Tool changer: • 18-position disc tool changer for HSK F63; tool weight 6 kg; max. tool length 200 mm • Configurations: 18 x max. Ø 130 mm; or 9 x max. Ø 180 mm + 9 x max. Ø 70 mm; sanding tools max. Ø 200 mm • Toolchanger raised for traveling pickup (left side) • Units (for tool changer unless stated otherwise): • Drilling/milling unit, 4 spindles: ER25 up to shaft Ø16 mm, max. projection 50 mm, max. speed 13,500 rpm, continuously tiltable via C-axis • Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12,000 rpm, integrated air blast, unlimited tilt over C-axis • Tilting saw/drilling unit: manually 0–90°, flange Ø30 mm, cutting body Ø52 mm, prepared for crosscut saw max. Ø 180 mm, drill chuck with Weldon D=10 mm, max. speed 9,000 rpm, C-axis tiltable • Cutter holder D=30 with chip guide: arbor length 45/80 mm, chip deflector plate controlled via C-axis, changer space Ø 140 mm • Edge trimming unit: simultaneous top/bottom, edge radius max. R12 mm, min. external radius ~R5 mm / internal radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis tilt, max. speed 12,000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow sensing shoes • WPL cutterhead: exit angle 5°, Ø 70 mm • Edgebanding/gluing equipment: Ksdpfx Aox D Ribsdkoww • Drive spindle/V for gluing units: mounted on the right side of the gantry; cross-slide with Y return lock and Z-axis lift; return lock with C-axis and electric/electronic interface; own Z-axis • Gluing unit for 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); minimum internal radius R40 at 90°; max. edge height

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Homag Machining Center Genius BAZ20/30/14/D Electronically controlled milling and edge banding machine, post-processing and drilling center for batch-based manufacturing of furniture components, solid wood, or similar materials. Base machine: - Heavy-duty, stable machine bed with a compact linear guide system. - Unit carrier with linear guide system, ball screw, and digital AC servo motor for positioning the Z-axis, travel path 340 mm. - Automatic central lubrication for all drives and linear guides. - Designed for the attachment of various table configurations. Control: Wood Wop 5.0 - Enlarged Z-axis stroke: 500 mm - Extension of the anti-slip mat - Pass-through table B20/30+40/…/D manual - Motorized width adjustment for longitudinal console D-table - Chip conveyor for B../30+40/K - Stop pins for edge overhang - Main spindle: 12 kW - 70-position chain tool changer for B20 for HSK 63 F tools - Aggregate interface for main spindle - Electrical/electronic interface: 220/24 volts - Gluing unit on 4 sides for main spindle - Melting unit with granulate container - External edge changer, automatic, 3-position - Rack exchange system for aggregates and tools - Rabbet pressing zone for main spindle Kodpfx Aex Nrk Hsdkjww - Flush-trimming unit for tool changer - Saw and cross-cutting unit for tool changer - Drilling-milling unit, 4 spindles for tool changer - Lock case milling unit for disc changer - Vertical milling unit with scan ring - Sanding unit with air blow nozzle - CNC programming system Wood-Wop - Postprocessor for BAZ - Free-standing operator panel Location: Ex works, customer site - Immediately available - System must be dismantled by the buyer at short notice

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, hitrost pomika os X: 35 m/min, največja hitrost vrtenja: 12.000 obr/min, število mest v zalogovniku orodij: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spraying device Kjdpfx Adjyqybuokjww MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application with rubber band Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (model: LaserTec) Roller set for pressing the edge with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 5321

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: nepreverjeno, delovna širina: 1.935 mm, število vreten: 40, višina plošče: 350 mm, delovna dolžina: 6.200 mm, število osi: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge banding magazines: 3 Number of tools in the tool magazine: 22 (at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X-direction: 4 Spindles for horizontal drilling in Y-direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Vacuum pods for securing the workpiece Safety mats at the front Vacuum pump Chip conveyor Fixed grooving unit for grooves in X-direction Kwsdpfxoyqx U Hs Adkow The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and accepts responsibility for installation, securing, and use of the machine at the destination. External reference: 8105

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, največja debelina roba: 3 mm, hitrost pomika os X: 25 m/min, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Kjdpfxoytr Hbs Adkoww Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Trimming Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW FEATURES Spraying unit Software for machine programming: PowerControl PC22 CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, moč: 19 kW (25,83 KM), potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.730 mm, število vreten: 20, Število orodnih postaj v orodni glavi 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverse beams: 8 Number of tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Kedeyttf Sspfx Adkjww Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW CNC controller model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, cutters, and aggregates are not included in the scope of delivery. Safety fences are supplied as available (left side only). The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6906

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.550 mm, višina obdelovanca (maks.): 40 mm, število vreten: 30, največja hitrost vožnje: 80.000 mm/min, TECHNICAL DETAILS Travel Range X-axis: 4,175 mm Travel Range Y-axis: 1,550 mm Traverse Speed X-axis: 80 m/min Traverse Speed Y-axis: 80 m/min Traverse Speed Z-axis: 30 m/min Max. Workpiece Height: 40 mm Number of Suction Traverse Bars: 8 Spindles Number of Spindles for Vertical Drilling: 20 Number of Spindles for Horizontal Drilling in X-direction: 10 Total Number of Spindles: 30 Milling Unit Number of Controlled Axes: 4 + Flex5 Motor Power: 15 kW Kjdpfeyttcwex Adkjww Automatic Tool Changer Liquid-cooled Saw Unit Tool Magazine 1 Number of Positions: 18 Tool Magazine 2 Number of Positions: 10 EQUIPMENT NC Positioning Suction Units Vacuum Pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Ta industrijska proizvodna linija HOMAG WEEKE je bila izdelana leta 2007. Ima celovito postavitev za obsežno obdelavo plošč in lepljenje robov, vključno z avtomatskimi nakladalnimi sistemi, centralnim valjčnim transporterjem, več moduli za lepljenje robov ter portalnim manipulatorjem za zlaganje. Idealna za optimizirano lesno proizvodnjo, zagotavlja učinkovito rokovanje in natančnost. Razmislite o priložnosti za nakup te industrijske linije HOMAG WEEKE. Kontaktirajte nas za več informacij o tem stroju. Kwedox D Dq Sspfx Adksw Vrste uporabe Kompletna proizvodnja

Stanje: rabljeno, številka stroja/vozila: 008395, Delovno območje os X: 3050 mm Delovno območje os Y: 1250 mm Moč glavnega vretena: 10 kW Število krmiljenih osi: 3 osi Število vrtalnih vreten: 27 Kwjdpfeygtcqex Adksw Število orodnih mest: 8

Stanje: rabljeno, številka stroja/vozila: 008323, Tip pritrjene obrobe: tanka obroba, močna obroba, masiven les Lepilni sistem: EVA, PUR Spojno rezkanje: da Multifunkcijska enota: da Maks. podajalna hitrost: 20 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 7 kos Kjdpfx Adex Hpkxokoww

Stanje: rabljeno, številka stroja/vozila: 005980, Formatna krožna žaga: Stroj 1 in 2 Maks. višina panela: 120 mm Maks. hitrost podajanja: 20 m/min Razdalja med zaskočniki: 1000 mm Kedpexcf S Isfx Adksww

Stanje: rabljeno, številka stroja/vozila: 008324, Maks. širina plošče: 1000 mm Ksdex Hpkropfx Adkjww Maks. dolžina plošče: 2500 mm Dolžina transporterja: 7000 mm Povratni tok kosov za stroj za lepljenje robov: desno