VRTALNA GLAVA HOMAG BAZ

HOMAG

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Edge banding machine from 2006. The HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, allowing for workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It is equipped with a single-sided edge banding unit capable of processing various edge materials up to 20 mm thick. If you are looking for high-quality edge processing solutions, consider the HOMAG Optimat KAL 330 edge banding machine that we have for sale. Contact us for further details. • Line workpiece capacity: • Length: 250–3000 mm • Width: 120–1200 mm • Thickness: 8–60 mm • Edge banding machine (KAL 330) – Base and transport • Solid machine frame; extendable workpiece support with roller rail, ~800 mm • Transport chain, 80 mm wide with rubber pad; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed: 18–25 m/min • Working height: 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depending on workpiece length) • Workpiece offset/overhang: 30 mm • Workpiece thickness: 12–60 mm • Edge material from strip: 0.4–20 mm (max. cross-section 900 mm²) • Edge material from coil: 0.3–3 mm (max. cross-section: PVC 135 mm², veneer 100 mm²) • Max. coil diameter: 830 mm Dodpjytf Irsfx Agpeup • Pneumatic connection: 7–8 bar • Feed system and control (integrated with KAL 330) • Flexible workpiece feed system wz10 for automatic feeding (longitudinal and transverse); for dimensionally accurate, square parts • Stepless adjustment of infeed guide (axis), speed adjustable at the entry terminal • Automatic lateral adjustment of units (workpiece overhang 30–80 mm) for gluing and post-processing • Entry terminal; solvent applicator top/bottom • Edge preparation and gluing • Pre-milling unit: 2 motors, each 4 kW, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Pre-melting unit with granulate storage • Quick-change system for QA/QE application unit; QA front glue reservoir for color change • Base glue unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max. Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • Milling unit HL84 with fixed milling fence for sensitive edges • Pneumatic milling motor adjustment (2 positions: flush/even and with overhang for contour milling) • Pneumatic bevel/straight switching; manual side milling fence adjustment for changing edge thickness • Rough trimming unit: 2 motors arranged vertically, each 1.5 kW, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position setting: rough trimming with approx. 0.2 mm overhang / without overhang • Reserved space for a fine trimming unit • Contour milling unit Servo FK13 automatic: • 2 motors, each 0.4 kW, 200 Hz, 12,000 rpm • Servo-driven movements; automatic 8-position tool changer • Feed speed max. 20 m/min; minimum distance between workpieces: 500 mm • Workpiece thickness: 12–60 mm • Automatic FK adjustment for consistent radii with varying edge thicknesses; automatic retraction • FK workpiece guide with additional clamping for min. 120 mm workpiece length (single-sided) • Finishing and cleaning • Multi cleaning system MN21 automatic:

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 3 Dodpfx Agsx D Nvgopjup Ta 3-osni stroj HOMAG WEEKE OPTIMAT BHX 500 je bil izdelan leta 2011. Ponaša se z robustnim CNC obdelovalnim centrom z delovnim območjem 2500 mm x 1300 mm, glavno elektro vreteno ima moč 6 kW, največja debelina obdelovanca pa je 80 mm. Vključuje 84 vrtalnih vreten in dvojni rezkalni vreteni, vsaka z močjo 6 kW pri 18.000 vrtljajih/min. Če želite kakovostne CNC zmogljivosti, razmislite o stroju HOMAG WEEKE OPTIMAT BHX 500, ki je na voljo za prodajo. Za več informacij nas kontaktirajte. Vrste uporabe CNC obdelava lesa

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Ta 4-osni HOMAG PROFI BMG 511/60/12/R je bil izdelan leta 2015. Gre za robusten CNC obdelovalni center z 18-pozicijskim menjavalcem orodij, vrtalno glavo s 30 vreteni in dinamično razporeditvijo delovne mize. Opremljen je z glavnim rezkalnim vretenom moči 12 kW in hitrostnim razponom do 24.000 vrt./min. Idealen je za zahtevna lesarska dela zaradi velikega delovnega območja 6.000 x 1.550 mm. Za več informacij o stroju nas kontaktirajte. Duodpfjx D Ra Hsx Agpop Vrste uporabe CNC obdelava lesa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Stroj HOMAG KAL 310/7/A3 je bil izdelan leta 2010. Gre za rabljen enostranski robni lepilni stroj z 28-pozicijskim ISAS magazinom robnih trakov, PU lepilno enoto in povratnim sistemom Boomerang. Vključuje spojno rezkalno enoto z dvema motorjema ter PU 34 lepilni sistem s kapaciteto do 6 kg/h. Idealen je za natančno lepljenje robov. Za več informacij o tej napravi nas kontaktirajte. Dsdpfx Agox D Ra Tepeup Vrste uporabe Lepljenje robov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, This HOMAG KFL 526 / C was manufactured in 2006. The robust double-sided edge banding machine processes workpiece thicknesses from 12 to 40 mm and formats up to 2500 x 1200 mm. The equipment includes a gluing unit, a profile milling unit, and a finishing unit for precise edge processing. Ideal for efficient edge banding at speeds of up to 35 m/min. Contact us for more information about this machine. Additional Equipment • Top/bottom separating agent spraying device / Double hogger unit longitudinal/crosswise: 6.6 kW with electro-pneumatic control / Gluing unit A3 - 2 rollers / Profile milling unit FF12 top/bottom with motors at 12,000 rpm / Finishing unit FA11 top/bottom / Stepless stop cams with a maximum cam overhang of 25 mm / Standard milling unit SF20 6.6 kW / Rough trimming unit 0.55 kW • PUR Nordson melting station / tool set / extraction duct Machine advantages Dusdpfx Agex U Uzrjpep Technical machine advantages • Workpiece thickness: 12 - 40 mm / minimum workpiece size (LxW): 250 x 240 mm / maximum workpiece size (LxW): 2500 x 1200 mm / maximum workpiece weight: 50 kg • Edgebanding tape thickness: 0.4 - 3 mm / maximum edge cross-section (plastic): 135 mm² / maximum edge cross-section (veneer): 100 mm² / maximum roll diameter: 830 mm • Longitudinal processing speed: up to 35 m/min for thin edges up to 0.6 mm / up to 30 m/min for thick edges up to 3 mm • Cross processing speed: up to 30 m/min for panel dividing / up to 20 m/min for edge processing • Minimum workpiece spacing: 500 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Stroj za lepljenje robov, izdelan leta 2009. Ta HOMAG PROFI KAR310/11/A20/S2 je opremljen s povratnim sistemom za obdelovance BARBARIC. Razmislite o priložnosti za nakup tega stroja za lepljenje robov HOMAG PROFI KAR310/11/A20/S2. Za več podrobnosti nas kontaktirajte. Dusdpfxsyhqi Do Agpsp • Stanje: rabljeno Dodatna oprema • BARBARIC povratni sistem za obdelovance

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, potovalna razdalja osi X: 6.175 mm, pomik osi Y: 1.900 mm, pomik po osi Z: 300 mm, število osi: 3, skupna višina: 300 mm, moč vretenovega motorja: 15.000 W, največja hitrost vretena: 24.000 obr/min, Equipamiento adicional • Dispositivos de seguridad: láser, parachoques • Soporte de par torsional: sí • Sierra para ranuras: orientable 90° • Husillos de taladrado verticales: 17 • Husillos de taladrado horizontales X: 2 • Husillos de taladrado horizontales Y: 2 • Husillo de fresado refrigerado por líquido: sí • Cadena portacables cerrada: sí • Terminal de mano: sí • HOMAG SaveScan: sí Ventajas de la máquina Ventajas técnicas de la máquina • Alta velocidad del husillo • Características de seguridad integrales • Ejes Z independientes: 2 • 4º eje: sí • 5º eje: husillo de 5 ejes • Ayudas para la disposición de piezas disponibles • Mesa de máquina: mesa consola • Número de consolas: 12 • Características: posicionamiento automático de la mesa, mesa HOMAG AP, dos filas de topes Información adicional Marcado de conformidad: Marcado CE Dimensiones Dedpeyap S Isfx Agpoup Profundidad de la máquina: 6175 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Cette HOMAG Optimat KL 78/A20/S2/Z a été fabriquée en 2001. Cette plaqueuse de chants unilatérale et robuste est équipée de nombreux dispositifs, notamment des unités de fraisage de joints, un pré-fondeur de colle, des zones de pression, des unités de coupe en bout et de fraisage affleurant. Elle dispose également d'une unité de fraisage de contours et de rainures moderne, de racleurs de profil et de surface ainsi que d'une unité de polissage, le tout piloté par l'unité Homatic NC 21. Contactez-nous pour plus d'informations sur cette machine. Avantages de la machine Dedpoyap Tlsfx Agpjup Avantages techniques de la machine • Plaqueuse de chants unilatérale avec retour des pièces • Fraisage des joints • Station d'encollage avec pré-fondeur de colle • Zone de pression • Unité de coupe • Coupe affleurante • Unité de fraisage de contours FK 13 avec changeur automatique d'outils 8 positions • Unité de fraisage de rainures • Racleur de profil // racleur de surface • Unité de polissage Informations additionnelles Machine toujours sous tension

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), največja hitrost vretena: 8.000 obr/min, This HOMAG Optimat LPP306 was manufactured in 2019. The used planer and profiling machine is equipped with six working spindles and is capable of processing workpiece widths up to 250 mm and heights up to 160 mm. Featuring PowerControl and powerTouch LPP300 for enhanced control, it offers feed speeds from 6 to 24 m/min. Spindle speeds are adjustable up to 8,000 rpm, ensuring versatility and efficiency in wood milling applications. Please contact us for more information about this machine. • Processed workpiece width: 10–250 mm • Processed workpiece height: 10–160 mm • Control system: PowerControl with powerTouch LPP300 • Infeed table length: 2,500 mm • Feed speed: 6–24 m/min Spindles: • First bottom spindle: • Motor power: 7.5 kW (Siemens IE3) Dodjygvnpepfx Agpsup • Speed: 6,000 rpm • Spindle diameter: 40 mm • Spindle length: 281 mm • First right spindle: • Motor power: 7.5 kW, infinitely variable speed (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 176 mm • First left spindle: • Motor power: 7.5 kW, infinitely variable speed (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 176 mm • First top spindle: • Motor power: 7.5 kW, infinitely variable speed (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 266 mm • Second top spindle: • Motor power: 7.5 kW, infinitely variable speed (Siemens IE3) • Speed range: 4,000–8,000 rpm • Second bottom spindle: • Motor power: 7.5 kW, infinitely variable speed (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 266 mm

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Ta 4-osni stroj HOMAG PROFI BMG 512/40/12/V/A je bil izdelan leta 2016 in je opremljen z lepilno enoto POWEREDGE ter štirikratnim magazinom robnih trakov. Stroj vključuje 18-pozicijski diskovni menjalnik orodij, 12 kW obdelovalno vreteno ter C-os z neomejenim obsegom vrtenja. Podpira obdelavo kosov dolžine do 4000 mm in debeline do 300 mm. Idealen je za napredno obdelavo lesa ter omogoča dinamično razporeditev prostora za optimalen izkoristek delovne površine. Kontaktirajte nas za več informacij o tem stroju. Vrste uporabe CNC obdelava lesa Duodpfx Asx D Nzvjgpop