Navpično brušenje od zgoraj

HOMAG SANDTEQ W-700

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Working height: 900 mm Working width: 1,350 mm Abrasive belt exchange side: left Workpiece thickness: 3 – 160 mm Frequency-controlled feed speed: 4 – 20 m/min Abrasive belt dimensions: 2,620 x 1,350 – 1,380 mm Adjustable abrasive belt blow-off device, 5-stage adjustable WRD WORKPIECE CLEANING ROTOR Workpiece cleaning unit with 16 rotating nozzles MOBILE CONTROL TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops Dsdsyw Ndmopfx Antewb GWRD BELT CLEANING PROGRAM After activating the program, the machine automatically adjusts to 10 mm workpiece thickness and the blow-off rotors are activated. After complete cleaning of the feed belt, the machine returns to the initial setting. AAT EXTRACTION SLIDE VALVE CONTROL Control of extraction slide valves via the terminal (24 Volt DC, slide valves not included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PC Emergency power supply for the abrasive belt oscillation in case of power failure Configuration consists of: SANDTEQ W-700, PROFI SWB735/RRE – bottom sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces. The machine is prepared to accommodate up to two auxiliary units, such as cleaning brushes, finishing or structuring brushes, and rotating cleaning nozzles. Units: I. R-UNIT Sanding unit with automatically adjustable contact roller, profiled steel roller, 240 mm diameter, with grit compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt change and increased process reliability - Abrasive belt drives with electronic, wear-free brake - Optical, contactless abrasive belt control - Pneumatic abrasive belt tensioning with integrated abrasive belt edge compensation II. R-UNIT Sanding unit with automatically adjustable contact roller, rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grit compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E-UNIT Sanding unit prepared for a pressure beam - Automatic locking of the sanding units for fast belt change and increased process reliability - Abrasive belt drives with electronic, wear-free brake - Optical, contactless abrasive belt control - Pneumatic abrasive belt tensioning with integrated abrasive belt edge compensation - Protected storage on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby mode to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing workpiece edge - Various sanding inserts, 80 mm wide with different felt hardness grades Machine dimensions L x W x H: 3,900 x 2,100 x 2,000 mm Machine weight approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – top sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces Units as above, with the addition of: FBM FINISHING BRUSH Brush unit with finishing brush Brush material: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions L x W x H: 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight approx. 6,500 kg

Stanje: rabljeno, Leto izdelave: 2022, HAAS ST25Y s protivrečnom vretenom, leto izdelave 2022 največji premer obdelave 298 mm, dolžina reza 572 mm, prehod vretena 76 mm, 12-pozicijska revolverna glava BMT65, os Y -/+ 50,8 mm, Dwodpfezk H Hvsx Antsb krmilnik HAAS, 3-čeljustna vpenjalna glava 254 mm, -protivrečno vreteno -odstranjevalec sekancev, -posoda s črpalko, -merilna sonda, -zajemalnik delcev malo ur delovanja, odlično stanje.

Stanje: rabljeno, Leto izdelave: 2025, Funkcionalnost: nepreverjeno, Homag Centateq P110 PROFI BMG110/3115/F/K CNC obdelovalni center (2025) Dwedpfx Aozc Rzpenteb vključno z Almig Combi XP15 kompresorjem zraka z rezervoarjem (2025) sistem za odsesavanje prahu Air Plants Dust Extraction Ltd (2025)

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), skupna masa: 3.800 kg, največja hitrost vretena: 600 obr/min, število osi: 5, This 5-axis SAACKE UWIF cylindrical grinding machine was manufactured in 2008. It features a maximum spindle speed of 600 rpm and a robust grinding spindle peak power of 16 kW. The machine accommodates a wide range of workpiece sizes with a maximum diameter of Ø 20 mm and a weight capacity of 1 kg. If you are looking for high-quality grinding capabilities, consider the SAACKE UWIF cylindrical grinding machine we are offering for sale. Contact us for more details. • Workpiece Carrier A-Axis: Direct drive/hollow shaft motor; Indexing accuracy ±15''; Indexing possibilities 1-999; Cumulative lead error over 100 mm: 8 µm; Max. speed: 600 rpm • Tool holder: ISO 50 • Spindle sleeve clearance: max. 28 mm (automatic clamping: Ø20 mm) • Rated drive power: - Grinding spindle S1-100%: 7.5 kW; peak: 16 kW - X-axis longitudinal travel: 2 kW - A-axis workpiece carrier: 2 kW - Z-axis cross slide: 2 kW - Y-axis grinding head slide (vertical): 2 kW - B-axis grinding head rotation (rotary table): 2 kW • Position measuring systems: - A-axis: direct measuring system - B, X, Y, Z axes: indirect measuring system - Resolution X/Y/Z: 0.0001 mm (0.1 µm) - Resolution A/B: 0.0001° • Electrical connection: 20 kW / 50 A; operating voltage 400 V, 50 Hz; control voltage 24 V; lighting voltage 230 V; pre-fusing: separate supply from network • Compressed air: 15-17 Nm³/h; min/max pressure 6/8 bar (600/800 kPa); quality ≥ class 4 (ISO 8573-1) • Control & software: CNC NUM Axium Power 1050 with PC, program memory 512 k; NUMROTOplus software (dongle/hardlock required); zero points calibrated with included measurement instructions (no marked reference points) Additional Equipment • Workpiece changer options (automation): - Option 1: Pick-up variant - Max. workpiece: Ø20 mm × 120 mm; 1 kg - Capacity per pallet: • Ø3.0-5.0 mm shank: 40 pcs • Ø5.1-8.0 mm: 32 pcs • Ø8.1-11.0 mm: 28 pcs • Ø11.1-14.0 mm: 24 pcs • Ø14.1-20.0 mm: 20 pcs - Option 2: Chain loading magazine (with gripper unit) - Capacity: 64 workpieces - Max. workpiece: Ø32 mm × 200 mm; 2.5 kg Dwodpfx Aneyiz R Uoteb - Features: chaotic loading of various workpieces; automatic collet change possible - Clamping sleeves: Ø6, 8, 10, 12, 14, 16, 20 - Option for external chain loader: increases machine weight to approx. 3,800 kg and required space to 3,000 mm × 1,875 mm • Coolant filtration system (TRANSOR): installation by customer; air for backflushing approx. 700 Nl/min for 5 min every 6-9 hours

Stanje: rabljeno, Leto izdelave: 2018, Tehnične podrobnosti: X-hod: 650 mm Y-hod: 450 mm Z-hod: 420 mm Krmiljenje: MAKINO Hyper i U-os: ± 75 mm V-os: ± 75 mm maks. velikost obdelovanca (D x Š x V): 1000 x 800 x 400 mm Teža obdelovanca: maks. 1500 kg Djdpfx Ansy I Ak Ietowb Velikost mize: 910 x 710 mm Teža stroja cca: 5 t Mere (dolžina/širina/višina): 3 x 3 x 2,3 m Dodatna oprema: Programski pomnilnik 10 GB Ethernet I/P vmesnik 5-osni potopni žični rezalni stroj v odličnem stanju. H.E.A.T. sistem za najhitrejše rezalne hitrosti.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 48.973 h, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840 D, število osi: 3, Ta DMG MORI CTX Beta 800 4a je bila izdelana v letu 2014. Opremljena je s krmilnikom Siemens 840 D, protivretenom in paketom za obdelavo palic, kar omogoča večjo prilagodljivost. Stroj ima 980-litrski sistem za hlajenje in zložljiv transportni sistem za učinkovito delovanje. Če iščete visokokakovostne funkcije struženja in frezanja, razmislite o stroju DMG MORI CTX Beta 800 4a, ki ga ponujamo v prodajo. Stroj se nahaja v Nemčiji. Za dodatne informacije o tem stroju nas kontaktirajte. • 2 × 16-mestni Sauter-Stern VID 30 • Siemens 840 D • Eksцентриčno struženje in frezanje • TC z nastavljivo hitrostjo • Proti vreteno • Steklene linearne merilne črtice Y1, Z1, Z2, Z3, X1, X2, X3 Dodatna oprema Dwedox D Nd Dopfx Antsb • 980 litrov hladilne tekočine s tlakom 8 bar/20 l in 20 bar/40 l, programirano prek funkcije M • Paterjev tračni filter • Sistem za čiščenje vpenjalne glave za glavno zunanjo stran • Sistem za čiščenje vpenjalne glave za nasprotno stran • Pištola za brizganje hladilne tekočine • Zložljiv transportni sistem • Naprava za obdelavo palic • Čiščenje oken s stisnjenim zrakom • Paket SK za obdelavo aluminija • Sistem za zaznavanje zloma orodja Artis CTM

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 140 h, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 3.050 mm, dolžina pomika po osi Y: 1.250 mm, dolžina podajanja os Z: 80 mm, vhodna frekvenca: 50 Hz, vhodni tok: 29 A, delovna širina: 3.050 mm, Wir bieten diese sehr gute HOMAG DRILLTEQ V-500 Durchlaufbohrmaschine, Baujahr 2021, an. Dwsdpjylp Slsfx Antjb Arbeitsbereich X: 3.050 mm Arbeitsbereich Y: 1.250 mm Arbeitsbereich Z: 80 mm Anzahl Frässpindeln: 1 Hauptmotorleistung: 10 kW Maximale Drehzahl: 24.000 U/min Werkzeugspannsystem: HSK-F63 Werkzeugwechsler-Positionen: 4 Vertikale Bohrspindeln: 15 Horizontale Bohrspindeln in X: 6 Horizontale Bohrspindeln in Y: 4 Nutschneidaggregat: um 90° schwenkbar Vertikale Arbeitsfläche: Maschinentisch Durchlauftechnik: Spezielle Werkstück-Spanntechnik Klemmgreifer Barcodeleser Sicherheitseinrichtung: Geschlossene Schutzeinhausung Steuerung: Homag powerTouch, HOMAG POWER CONTROL Software: HOMAG WOODWOP 7.2 Konformitätskennzeichnung: CE-Kennzeichnung Kategorie: Bearbeitungszentrum Typenbezeichnung: DRILLTEQ V-500 Untertyp: OPTIMAT BHX200 Maschinennummer: 0-250-73-7195 Schaltplan: 0-250-73-7195 Versorgungsspannung: 400Y/230 V Neutralleiter: vorhanden Phasen: 3 Frequenz: 50 Hz Maximaler Betriebs-Nennstrom: 29 A Absicherung: 35 A Steuerspannung: 24 V Bei Fragen oder für weitere Informationen senden Sie uns gerne eine Nachricht oder rufen Sie uns an.

Stanje: rabljeno, številka stroja/vozila: 007984, Maks. obdelovalna širina: 1300 mm Min. obdelovalna debelina: 4 mm Delovna miza: fiksna višina Podtlak preproga: da Dwjdpfxowqdbmo Antjb Število delovnih agregatov: 4 kos

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 22.387 h, Proizvajalec: Hermle | Tip: C 400 U | Serijska številka: 23589 | Letnik: 2015 | Delovnih ur: pribl. 8939 | Upravljalni sistem: Heidenhain TNC 530; Gibi (X/Y/Z): 850 / 700 / 500 mm; Vrtljivo/nagibno mizo, premer 630 mm, integrirano, osi C in B. Revija za orodja, 38 mest; Število vrtljajev vretena do 18.000 vrt/min; Moč pogona pribl. 20 kW; Teža stroja pribl. 8.000 kg; Hladilni sistem Knoll 850 K-1 z enoto za visok tlak; Sistem za hlajenje; Centralni filter z povratnim transporterjem in toplotnim izmenjevalnikom; NC vrtljivo mizo; Navedene delovne ure se nanašajo na vreteno. | Mere: pribl. 4000 mm x 3400 mm x 2700 mm (Š x V x G) | Pribl. 10.500 kg | Navedene mere so približne vrednosti. Vse ostale informacije so podane brez garancije. | Siva | Jeklo Kategorija: Stroji in tehnične naprave Dodpfx Aozq Dkxontswb

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2009, Rabljeni stroj za krivljenje cevi Jutec Tip: 5000 Kapaciteta: do pribl. 40 mm Dolžina trna: 4500 mm CNC vodenje Avtomatska glava Ročno vrtljiva glava s hidravličnim vpenjanjem Vključno s 3 kompleti orodij Djdpfx Ansyfmwxotjwb Letnik izdelave: 2009 Zelo malo uporabljen