Homag Sandteq W-700 nakup rabljenega (36.511)

Stanje: rabljeno, številka stroja/vozila: 008479, Maks. obdelovalna širina: 1650 mm Min. obdelovalna debelina: 3 mm Bodpfoy Edqwsx Agtswl Delovna miza: fiksna višina Število delovnih enot: 4 kos

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Working height: 900 mm Working width: 1,350 mm Abrasive belt exchange side: left Workpiece thickness: 3 – 160 mm Frequency-controlled feed speed: 4 – 20 m/min Abrasive belt dimensions: 2,620 x 1,350 – 1,380 mm Adjustable abrasive belt blow-off device, 5-stage adjustable WRD WORKPIECE CLEANING ROTOR Workpiece cleaning unit with 16 rotating nozzles MOBILE CONTROL TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM After activating the program, the machine automatically adjusts to 10 mm workpiece thickness and the blow-off rotors are activated. After complete cleaning of the feed belt, the machine returns to the initial setting. AAT EXTRACTION SLIDE VALVE CONTROL Control of extraction slide valves via the terminal (24 Volt DC, slide valves not included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PC Emergency power supply for the abrasive belt oscillation in case of power failure Configuration consists of: SANDTEQ W-700, PROFI SWB735/RRE – bottom sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces. The machine is prepared to accommodate up to two auxiliary units, such as cleaning brushes, finishing or structuring brushes, and rotating cleaning nozzles. Units: I. R-UNIT Sanding unit with automatically adjustable contact roller, profiled steel roller, 240 mm diameter, with grit compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt change and increased process reliability - Abrasive belt drives with electronic, wear-free brake - Optical, contactless abrasive belt control - Pneumatic abrasive belt tensioning with integrated abrasive belt edge compensation II. R-UNIT Sanding unit with automatically adjustable contact roller, rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grit compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E-UNIT Sanding unit prepared for a pressure beam - Automatic locking of the sanding units for fast belt change and increased process reliability - Abrasive belt drives with electronic, wear-free brake - Optical, contactless abrasive belt control - Pneumatic abrasive belt tensioning with integrated abrasive belt edge compensation - Protected storage on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby mode to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing workpiece edge Bjdpfxeyw Ndme Agtjwl - Various sanding inserts, 80 mm wide with different felt hardness grades Machine dimensions L x W x H: 3,900 x 2,100 x 2,000 mm Machine weight approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – top sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces Units as above, with the addition of: FBM FINISHING BRUSH Brush unit with finishing brush Brush material: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions L x W x H: 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight approx. 6,500 kg

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, 1. Enota jekleni valj Ø140 mm 2. Kombinirana enota – gumijasti valj in elektronska segmentna blazinica, EPS sistem delovna širina 1100 mm, delovna višina 3–160 mm – dimenzija traka 1900 x 1120 mm Bwodpeym Rl Njfx Agtol glavna moč 30 kW – skupna masa pribl. 1900 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, HOMAG Sandteq w-300 Tehnični podatki: - Hitrost pomika traku: 2,5 - 13 m/min - Delovna višina: 900 mm - Delovna širina: 1350 mm - Število obdelovalnih enot: 2 - Debelina obdelovanca: 3 - 160 mm z avtomatskim merjenjem - Dimenzije stroja D x Š x V: pribl. 2115 x 2100 x 2415 mm - Teža stroja: pribl. 4000 kg Bodpfx Agsxczmzotowl - Skupna električna moč: pribl. 39 kW - Priporočena predhodna zaščita: 80 A - Vakuumska miza - Q = prečna brusilna enota s Poly V-jermenom / 13,5 kW (2-16 m/s) - X = kombinirana enota s kontaktno valjčko in sistemom pritisnega nosilca / 18,5 kW (2-18 m/s) - Super-finish funkcija: kalibriranje, vmesno brušenje furnirja & laka, fino brušenje furnirja & laka - Krtačna enota - Čistilni rotor z ionizacijo - Powercontrol s Powertouch Stroj je takoj na voljo. Nakladanje na tovornjak je možno.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0278050457, HOMAG/FRIZ OPTIMAT PFS 700/15 Delovna širina – maks. 1500 mm – min. 25 mm Premer valja – maks. 600 mm Notranji premer tuljave – 76 mm Hitrost rezanja brezstopenjsko nastavljiva – 6 – 100 m/min Premer zgornjega rezila – 130 mm Premer protinoža – 105 mm Priključna moč – približno 5 kW Potrebni tlak stisnjenega zraka – 6 bar Dolžina stroja – 2100 mm Širina stroja – 2800 mm Teža – 2200 kg Upravljalna stran v smeri obratovanja – leva Bsdoufgr Hopfx Agtjwl Oprema je v brezhibnem delovnem stanju. Tehnične informacije so na voljo v priloženi PDF datoteki.

Stanje: rabljeno, številka stroja/vozila: 007328, Delovno območje os X: 3200 mm Delovno območje os Y: 1850 mm Delovna površina: z vakuumskimi konzolami Moč glavnega vretena: 15 kW Bsdsxmgybopfx Agtowl Število krmiljenih osi: 3 osi Število vrtalnih vreten: 31 Število mest za orodja: 10

Stanje: rabljeno, številka stroja/vozila: 007329, Delovno območje os X: 3200 mm Bjdpfx Ajxn Nfvsgtewl Delovno območje os Y: 1850 mm Delovna površina: z vakuumskimi konzolami Moč glavnega vretena: 15 kW Število krmiljenih osi: 3 osi Število vrtalnih vreten: 31 Število mest za orodja: 10

Stanje: rabljeno, Ta rabljeni, dvostranski rolni kontejner z vložnimi vrati je prilagodljiva in učinkovita rešitev za notranji transport in začasno skladiščenje blaga. Zahvaljujoč odstranljivim vložnim vratom je mogoče rolni kontejner enostavno prilagoditi želeni uporabi in s tem zagotoviti optimalno uporabnost. Bwedpfx Aoy Hpr Aegtel

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Naprodaj: HOMAG SAWTEQ B-200 (HPP200/32/32) — Avtomatska žagalna linija za razrez plošč Ponujamo avtomatsko žago za razrez plošč HOMAG SAWTEQ B-200, model HPP200/32/32 — visoko precizni stroj, zasnovan za razrez laminiranih in nelaminiranih plošč iz lesnih materialov. Izpostavljene lastnosti stroja Žaga je opremljena z motorizirano predrezalno enoto, 21-palčnim Full HD večdotikovnim zaslonom in krmilnim sistemom HOMAG CAD MAtic s 2D in 3D vizualizacijo razreznih načrtov. Pozicioniranje poteka prek brezhibnega elektromagnetnega sistema z natančnostjo ±0,1 mm. Oddaljena diagnostika je možna prek sistema TeleServiceNet. Voziček žage vozi s hitrostjo 1–80 m/min in ga poganja zobati jermen ter zobniški sistem — brez potrebe po mazanju, brez pojavov resonance in z zagotovljeno natančno postavitvijo. Na vodilih vozička velja 10-letna garancija. Bedoy Huv Tspfx Agtjwl Pritiskalna letva zagotavlja enakomeren pritisk po celotni širini plošče, kar odpravlja napake vzporednosti in poškodbe materiala. Optimizirano odsesovanje prahu zagotavlja, da vrednosti emisij ostajajo občutno pod predpisanimi mejami. Tehnične specifikacije Dolžina reza 3.200 mm, globina reza 3.100 mm, višina žaginega lista 65 mm, delovna višina 920 mm. Glavni motor 7,5 kW (opcijsko 9,2 kW). Napajanje 400 V / 50 Hz. Potreben delovni tlak: 6 barov. Vključeno v prodajo Vključuje glavni motor žage 11 kW (50 Hz), 4 ročne ustavljalce za predlaminirane kose, 3 valjčne elemente za sprednjo mizo, programsko opremo za optimizacijo reza CAD Plan 4, upravljanje višine pritiskalne letve, slovensko dokumentacijo in besedila na zaslonu ter embaliranje. Stroj je CE certificiran, GS preizkušen in izpolnjuje zahteve BGI 739-1.

Stanje: rabljeno, številka stroja/vozila: 008402, Najv. širina plošče: 4300 mm Najv. dolžina plošče: 2500 mm Najv. izstop glavnega žaginega lista: 110 mm Število vzdolžnih vpenjal: 9 Število prečnih vpenjal: 4 Bwodpfxoygtbme Agtsl

Stanje: rabljeno, številka stroja/vozila: 008502, Maks. širina panela: 3800 mm Bjdjy Edp Hspfx Agtowl Maks. dolžina panela: 3800 mm Maks. izhod glavnega žaginega lista: 110 mm Število vpenjalnih klešč: 11

Stanje: rabljeno, številka stroja/vozila: 007956, Position 1: Transfer system HOMAG-PROFI KFL 350/11/A3/WZ14 Position 2: Single-sided edge banding machine HOMAG-PROFI KFL 350/11/A3/WZ14 Position 3: Panel return system HOMAG-PROFI KFL 350/11/A3/WZ14 Bjdpfjwuudmox Agtowl

Stanje: rabljeno, številka stroja/vozila: 007906, Položaj 2: Enostranski robni lepilni stroj HOMAG-PROFI KFL 350/10/A3/WZ Bwedowucm Aepfx Agtel

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Podvozje za robne lepilke Bil je nameščen na Homag Edgeteq S-200, KDF 1130 FC (1100 kg). Zagotovo pa ustreza tudi drugim strojem, npr. Brandt (morda bodo potrebne manjše prilagoditve) Bjdpfx Asw S Dmdsgtewl Dolžina U-profilov pribl. 1130 mm Vgradna višina z valji pribl. 150 mm 4 robustna kovinska vrtljiva kolesa z mazalko 2 zavore 2 podložni plošči za uravnavo višine Stroj je možno po dogovoru prikazati na naši lokaciji. Ponujamo samo stroje, ki so pripravljeni za prikaz v naši skladišču; glejte še "druge ponudbe tega ponudnika".

Stanje: rabljeno, številka stroja/vozila: 005981, Maks. širina panela: 1200 mm Maks. dolžina panela: 2500 mm Prenos na 90 stopinj: da Bedpfjxn Nf Aex Agtowl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, številka stroja/vozila: 0-341-73-4415, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 4.522 h, moč: 7,5 kW (10,20 KM), največja širina rezanja: 3.200 mm, premer žaginega lista: 310 mm, izvrtina žagine plošče: 60 mm, skupna masa: 5.000 kg, TECHNICKÉ PODATKE Maks. širina reza: 3.200 mm Maks. dolžina reza: 3.200 mm Bwodpfx Agey Ai Upjtol Iztek žaginega lista: 65 mm Maks. hitrost prehoda: 60 m/min Hitrost programskega pomika naprej: 25 m/min Hitrost programskega pomika nazaj: 60 m/min Hitrost žaginega vozička: 60 m/min Ročni prekucni omejevalniki: 4 kosi Premer izvrtine žaginega lista: 60 mm Maks. premer žaginega lista: 310 mm Premer izvrtine predrezkarja: 45 mm Premer lista predrezkarja: 150 mm PODROBNOSTI O STROJU Krmiljenje: CADmatic 5 Glavni motor žage: 7,5 kW Obratovalne ure: 4.522 Dimenzije in teža Transportne mere: 8.000 x 2.400 x 2.000 mm Transportna teža: 5.000 kg OPREMA Intelliguide optična LED podpora 1 zračna miza 2.100 x 650 mm z valjčnim elementom 2 zračni mizi 1.800 x 650 mm z valjčnimi elementi 21,5-palčni zaslon na dotik Optimizacijska programska oprema CAD Plan 4 Vpenjalne naprave: 50, 250, 450, 1.200, 2.000, 2.700 mm Predrezalna enota

Stanje: rabljeno, Leto izdelave: 2002, Dvostranski softforming stroj za lepljenje robov Bsdpjyyxc Rsfx Agtowl HOMAG tip Power KF 20/34/QE/30 Št. stroja 0-202-25-8815, Letnik 2002

Leto izdelave: 2019, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Box On Demand, continuous corrugated cardboard, focus on your CO2 footprint. Bwjdpfsyy Iqkox Agtjl The machine listed here for processing continuous corrugated cardboard belongs to the series of static operating machines, i.e., all crosswise operations are performed while the cardboard is stationary. The machine is designed for high productivity. The maximum working width for cardboard is 1,500 mm. All tool adjustments are performed automatically. 1) Main machine body (Automatic Carton Cutter): - Linear cross-cutting and cross-creasing unit for head and foot processing on the cardboard - 8 longitudinal creasing and slitting units from above for longitudinal creasing and cutting of the cardboard 2) Dual carton magazines: - 2 carton magazines enable the provision and feed of raw cardboard to the processing machine - Stack height for continuous corrugated cardboard up to max. 2,000 mm possible 3) Control cabinet, controls, electronics: - Contains all components required to operate and control the system - Control cabinet components are based on HOMAG standards.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, We have a W+D (Buhrs ITM) BB700 16K S1 Servo Inserting System, year of manufacture 2011, available! This machine is in excellent condition as it has always received the necessary maintenance and has processed only 21 million envelopes. The machine is fully prepared for integration with a Mueller Apparatebau or KERN transactional system channel for feeding/reading/gathering/folding A4 documents. In such a configuration, we can also offer a used Mueller channel equipped for continuous processing, complete with unwinder, cutter, and merger. Purchase of this optional system is not mandatory, but possible. Year of manufacture: 2011 Configuration: - 6-station base - 4x RF2 rotary feeders - 2x HF2 vacuum friction feeders - Divert bin 1 - On-edge output conveyor Prepared for a Mueller Apparatebau or KERN transactional channel for feeding/gathering/folding A4 documents, or for continuous processing with cutter integration. Envelope formats: - min. 105 × 162 mm (C6/DL) - max. 250 × 353 mm (B4) Product formats: - min. 80 × 105 mm (A6) - max. 229 × 324 mm (C4) Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm Bodpfx Agowml S Estowl 16,000 cycles per hour

Stanje: zelo dobro (rabljeno), Panel saw with rear lifting table infeed Bsdpfx Aeimr Icegtowl Control system: Power Concept Software: CADmatic 4 Professional Lifting table infeed (mm): 4300 x 2200 No. 2 rear pushers (TWIN PUSHER) model POWER CONCEPT With clamping grippers Infeed equipment for thin panels (min. thickness mm): 3 Max. cutting width (mm): 4300 Usable stroke of pusher (mm): 4300 Max. saw blade projection (mm): 95 (automatic) Scoring saw (max. blade diameter / power): 180 mm / 2.2 kW Main saw (max. blade diameter / power): 380 mm / 13.5 kW (max. 18 kW) Adjustable saw carriage feed (m/min): 1 - 150 Front air flotation tables (qty): 4 Total connected load (kW): 28 OPTION: - Cut Rite software (optimization) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Label printer (option) - Software LABELING PACKBR 3/4/5 (labels)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, PLATTENAUFTEILSÄGE WINKELANLAGE Steuerung PowerControl V2.1 - CADmatic 5 (Tapio ready) Angetriebene Rollenbahnen mm 2200 x 4500 ca. Hubtisch (mm) 4300 x 2200 1° Einschiebersäge mit Nr. 4 Spannzangen 1° Plattenaufteilsäge Max. Schnittbreite (mm) 4300 Max. Sägeblattüberstand (mm) 125 Vorritzsäge (max. Sägeblattdurchmesser / Leistung) mm 180 (Kw 2,2) Hauptsäge (Sägeblattdurchmesser max / Leistung) mm 450 (420) Kw 18 Regelbarer Sägewagenvorschub (m/min) 1 - 130 2° Einschiebersäge mit Nr. 8 Spannzangen 2° Plattenaufteilsäge Max. Schnittbreite (mm) 2200 Max. Sägeblattüberstand (mm) 125 Vorritzsäge (max. Sägeblattdurchmesser / Leistung) mm 180 (Kw 2,2) Hauptsäge (Sägeblattdurchmesser max / Leistung) mm 450 (420) Kw 18 Regelbarer Sägewagenvorschub (m/min) 1 - 130 Nr. 2 vordere Luftkissentische (2 x mm 800 x 2810) Gesamtanschlusswert A 102 Bsdpfox Aqdcsx Agtswl OPTION: Nr. 1 Schrottschleifer

Stanje: dober (rabljeno), OMLAT Homag Main Spindle 12 kW 2-056-09-9670 Motor Spindle with C-Axis and RENISHAW Probe Please contact us if you only require the spindle itself and not the additional units. We also have another spindle in stock which can be offered without C-axis and probe. Bwedpfx Aoudmbrsgtol Technical Specifications: Tool holder: HSK F63, taper diameter 38 mm, similar to DIN 69893 Tool clamping: Automatic with a clamping force of 11,000 N Maximum tool weight: 6 kg Rotational direction: Clockwise/counter-clockwise, programmable Speed range: Infinitely variable 1,500 - 18,000 rpm, programmable Drive: Frequency-controlled three-phase motor Drive power: 12 kW in S-1 operation Spindle lubrication: Single-shot grease lubrication Spindle cooling: Water cooling Constant power: From 12,000 to 18,000 rpm Serial number: 006186 Homag part number: 2-05609-9670 Renishaw MP 11 Probe The Renishaw MP 11 probe is an essential upgrade for your CNC machine. It enables ultra-precise measurements and ensures your machining processes are always accurate and reliable. NC-controlled C-axis (W-axis) The NC-controlled C-axis (W-axis) significantly expands your machining capabilities. This axis allows for 360° rotational movement and is perfectly tailored for use in Homag/Weeke machines.

Stanje: rabljeno, Modular aggregate kit, format processing unit, cutting unit, milling unit, contour milling unit, jointing milling unit, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor for edge banding machine -Manufacturer: Homag, cross-cutting unit from edge banding machine BRANDT KM 35 -Motor: Homag Type LF-40-L -Power: 0.27 kW / 12,000 rpm Bwsdpfx Asgy T I Tegtsl -Voltage: 220V / 200 Hz -Saw blade: Ø 90 mm -Pneumatic components: Bosch -Individual components: see photos -Overall dimensions: 500/370/H680 mm -Weight: 26 kg

Stanje: rabljeno, Aggregate modular system, format processing unit, machining unit, milling unit, contour milling unit, jointing milling unit, crosscutting unit, double-end profiler, edge processing machine, scoring motor, machining motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy-duty dovetail guide -1x Perske motor -with long shaft -Motor type: KNS 70.12-2DF Bwodpfeb Uhvtsx Agtel -Power: 5.5/8.0 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz -Speed: 2870/5880 rpm -Other motors with different power ratings available from stock at additional cost -Dimensions: 1250/1350/H600 mm -Weight: 400 kg

Stanje: rabljeno, Modular aggregates, format processing unit, machining aggregate, milling aggregate, contour milling aggregate, joining milling aggregate, cross-cutting aggregate, double-end profiler, edge processing machine, scoring motor, machining motor, milling motor for edge processing machine. Bwodpfx Agob Uhvbjtsl -HOMAG milling aggregate for format processing -with heavy-duty dovetail guide -1x Perske motor -with long shaft -Motor type: KNS 70/12 -Power: 3/4.4 kW -Voltage: 220/380 Volt -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other motors with different power ratings available from stock at extra charge -Dimensions: 1200/1300/H550 mm -Weight: 290 kg