Stroji za olepljanje robov Sklop 1

HOMAG PROFI KAL330/7/A3/WZ

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Codpfx Afjh E Sghsxopu Model: BHX 500 Year of Manufacture: 2008 Working Range X: 2,500 mm Working Range Y: 1,300 mm Working Range Z: 4 - 80 mm Number of Milling Units: 2 Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Horizontal Drilling Spindles (X): 16 Horizontal Drilling Spindles (Y): 4 Grooving Saw: Swivels 90° X-Axis Speed: 130 m/min Y-Axis Speed: 80 m/min Z1-Axis Speed: 50 m/min Z2-Axis Speed: 27 m/min Spindle Speed: 18,000 rpm Dismantled - immediately available

Stanje: zelo dobro (rabljeno), TECHNICAL DATA NOT OF THIS MACHINE RETURN DEVICE for Edge Banding Machine (LEFT) In combination with a single-sided edge banding machine, this allows a single operator to consistently feed the machine. Air curtain table, infeed and outfeed (overall dimensions: 3520 x 2560 mm) 180° transfer (3120 x 2140 mm) with motorized roller conveyors and motorized belts Motorized conveyor belt (9080 x 1560 mm) Cpsdoff R Tqjpfx Afxsu Panel dimensions (MIN/MAX): Length – 240 mm / 2800 mm Width – 120 mm / 1300 mm Thickness – 8 mm / 60 mm, optional up to 100 mm

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 RUWI Three-Spindle Under-table Router Professional equipment for the workshop This under-table router enables easy chamfering, edge rounding, profiling, grooving, sanding, and various other milling tasks, quickly delivering the desired result. Rapid tool changes are possible thanks to the conveniently accessible tool magazine. With the larger models, setup times are increasingly reduced. Costly and time-consuming fine adjustments and test milling are eliminated when equipped with all essential tools. The spindle can be continuously adjusted to the optimal working position. This model is ideally suited for workshop use and is often utilized for finishing. Made in Germany. Features and Technical Data: - High-quality construction - 3 tools available at any time - Electronic speed control prevents RPM fluctuations under load - Robust and high-performance motor - Motor with overload protection - Temperature monitoring via PTC resistor - Soft start and inrush current limiter - Reverse feed thread above ball bearings reduces ingress of dust and debris - Fast tool change - Dust extraction above and below the table top - 1x fine adjustment - Including stop ruler - Including mounting kit for table extension - Convenient tool change from above - BG and wood dust certified Technical Data: - Table size: 640 x 500 mm - Table height: 910 mm - Variable speed control: 8,000 – 25,000 rpm - Tools available: 3 - Milling stroke: 43 mm - Motor power: 1,050 watts for continuous industrial operation - Voltage: 230 V - Router spindle: 22 mm diameter - Collets: 8 mm (standard), optionally 6 mm, 6.35 mm, and 10 mm - Extraction port: 120 mm - Mobility: 4 swivel castors - Weight: 91 kg Availability: Short-term Csdpfx Aferk Tqkexjpu Location: Solingen

Stanje: rabljeno, številka stroja/vozila: 007877, Maks. širina plošče: 1100 mm Maks. dolžina plošče: 2500 mm Cpsdpewkf Hqefx Afxju Povrat delov za robno lepilko: levo

Stanje: rabljeno, Leto izdelave: 2006, IMA Novimat Edge Banding Machine: Manufacturer: IMA Model: Novimat Concept/I/G/80/650/R3 Year of manufacture: 2006 Machine No.: 08113 Rated power: 41 kW Workpiece feed: Sliding chain Fence ruler: Adjustable fence ruler 700.080 Infeed table: 63.152 Milling unit: 08.378 Glue level monitoring: Available Glue application station: 04.0832 Bonding unit: 04.1570 PU pre-melter: 283.203 High-speed tool holder: For high-speed motors Cut-off unit: 08.42 Milling unit: 08.0555 Multi-processing unit: 08.348 Multi-profile scraping blade device: 08.516 Flat scraper: 08.517 Corner copying buffing unit: 08.604 Buffing unit: 08.617-4 Safety features: Light barriers, temperature controller, control terminal Additional equipment: Upstream roller conveyor table Total machine length: approx. 11/16 m Extraction system: Included Accessories: Edge magazines: 2 sliding magazines for edge rolls, each holding 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): Cedpornkw Djfx Afxspu 2 plasma devices Control cabinet Panel return system (Manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, varying table lengths Round belt conveyor table Control cabinet system 2 angle transfer tables Peripheral equipment for edge processing line: Consisting of: Interface system Barcode scanning system

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 - 3 mm Panel thickness (min/max): 8 - 60 mm Control: ICOS open compact Feed speed (adjustable): 6 - 30 m/min Cpsdpjltmnlofx Afxju Pressure belt, driven – with spraying unit (for liquid anti-adhesive) Panel feeding system: A1 / 15 Adjustable fence – CNC controlled, panel infeed system Barcode reader Joint trimming unit with CNC control 08.379 (2 x 4.0 kW) Radiator for workpiece edge heating Gluing unit (P.U.R. glue + premelter) VTG + 283.203 Edge pressure zone. Edge height setting – CNC controlled. Edge magazine for rolls (number of compartments): 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spray unit (for sliding agent) Contour milling unit (for fine milling) CNC controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4). Free slot Universal milling unit for grooving, rebating, and profiling 08.190 (4.5 kW x 1)

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), Type of adhesive: PUR adhesive, glue application system: cartridge-based, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16 m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Includes various spare parts and return conveyor Ligmatec. Documentation available. On-site inspection possible. Codpfx Asugmw Eofxepu

Leto izdelave: 2024, Stanje: novo, Systém návratnosti RTS Compact je samostatný systém, který lze napojit na jakýkoliv olepovačku hran (KAM), nezávisle na výrobci. Průchozí rychlost je plynule přizpůsobitelná rychlosti KAM. RTS Compact je dodáván kompletně s rozvaděčem a je po instalaci okamžitě připraven k provozu. Volitelně: „Rozšíření dopravní techniky RTS Compact“ pro jednoduché otáčení dílů při příčném olepování hran. Volitelně dostupný: „Ergonomický balíček RTS Compact“. Na konci zpětného dopravníku je použit zdvihací stůl a vzduchový polštářový stůl. Tato volba umožňuje ergonomickou práci. - Připojení ke všem olepovačkám hran všech výrobců - Ovládání KAM jednou osobou možné - Maximální ergonomie - Úspora personálních nákladů - Šetrná přeprava materiálu - Montáž cca 0,5 dne - Zařízení na otáčení drobných dílů Cedpfsw Nadmox Afxjpu - S dopravním pásem L 4500 B 800 Jednostopá válečková kolej Řídicí systém RTS Compact – volitelně ovládací skříň Dostupnost: krátkodobě Sklad: Flörsheim

Stanje: rabljeno, številka stroja/vozila: 007227, Pozicija 1: Enostranski robni lepilni stroj HOMAG + LIGMATECH-KAL 310 + ZHR 05 Pozicija 2: Sistem za vračanje plošč HOMAG + LIGMATECH-KAL 310 + ZHR 05 Cpsdpjwuuc Ajfx Afxou

Stanje: zelo dobro (rabljeno), FLEXIBLE BATCH-SIZE-ONE PRODUCTION AND SINGLE-SIDED EDGEBANDING & FORMATTING LINE Comprising the following machines: Cedpfx Aokt Uuaefxopu M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (right) FORMAT AND EDGE BANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Coil material (edges) thickness (min/max) mm 0.3 / 3 Control/software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 jointing milling units with CNC control 08.378 (4 motors x 4.5 kW) Gluing unit (Hot Melt adhesive + pre-melter) VTG + 283.205 Edgeband magazine for coil material (24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x 0.2 kW) 0°-25° Premilling unit 08.055.0.1680 (1 x 0.85 kW) Multi-profile milling unit (CNC controlled) 08.0587 HS/LS1 (2 x 1 kW) Contour milling unit (for fine milling) CNC controlled KFA x20 (1 x 0.5 kW) 20 m/min Multi-profile scraper unit (CNC controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) No. 3 universal milling units for grooving, rebating, and profiling 08.190 (3 x 4.5 kW) CNC controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO"