Beutler nakup rabljenega (8)

Stanje: rabljeno, Leto izdelave: 1974, številka stroja/vozila: 4139, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, hod: 140 mm, širina mize: 530 mm, dolžina mize: 750 mm, širina plošče bata: 335 mm, dolžina plošče bata: 440 mm, Oprema: dokumentacija / priročnik, Naprodaj je robustna ekscentrična stiskalnica Beutler Maschinenbau s približno 80 ton pritisne sile. Stroj je idealen za izsekovalne in preoblikovalne operacije. Podatki: • Površina mize: ca. 750 x 530 mm • Površina batnice: ca. 440 x 335 mm • Nastavitev batnice: ca. 150 mm Ncjdjzb Eaqopfx Ai Eow • Hod: nastavljiv 20–140 mm • Največja višina vgradnje: ca. 320 mm • Prehod skozi mizo: Ø ca. 230 mm Prodaja brez garancije, izključno na lokaciji. Stroj se izroča brez električnega in pnevmatskega priključka. Plačilo pred prevzemom.

Stanje: rabljeno, Leto izdelave: 1983, Technical details: Pressing force: 100 t Stroke: fixed 20 mm Strokes per minute: 55 spm Throat depth: 355 mm Ram bore: Ø 36 mm Njdpfou Nfizox Ai Eocw Table size: 900x640 mm Ram adjustment: 150 mm Ram clamping area: 500x415 mm Height above floor: 800 mm Maximum distance between table and ram: 390 mm Passage opening in table: Ø 330 mm Total power requirement: 11 kW Approx. machine weight: 7.5 t Approx. machine dimensions LxWxH: 1.46x1.58x2.57 m Transport dimensions LxWxH: 1.9x1.6x3.1 m The press is supplied without machine control panel/electrical cabinet. (Control system can be supplied optionally.) Complete electric single drive for 3x 380 Volt, 50 Hz Belt and ram guard Friction clutch and brake unit PRESSMATIC

Stanje: rabljeno, Leto izdelave: 1983, Technical details: Pressure: 100 t Stroke: 20 mm fixed Strokes per minute: 55 Table surface: 900x640 mm Throat depth: 355 mm Ram adjustment: 150 mm Pin hole in ram: Ø 36 mm Ram clamping surface: 500x415 mm Height above floor level: 800 mm Max. distance between table and ram: 390 mm Die opening in table: Ø 330 mm Total power requirement: 11 kW Machine weight approx.: 7.5 t Transport dimensions (LxWxH): 1.9x1.6x3.1 m Ncjdpeu Nfi Uofx Ai Eow Press is without machine control panel/control cabinet (installation optional). Complete electric separate drive for 3x 380 Volts, 50 Hz Belt and ram guard Friction clutch and brake unit PRESSMATIC

Stanje: rabljeno, Leto izdelave: 1998, Beutler P96-C630 - Ekscentrična stiskalnica - mobilna nadzorna plošča - brezstopenjsko nastavljiv pogon - kombinacija sklopke in zavore - zaščita proti preobremenitvi v batnici - svetlobna pregrada - labodja vratna svetilka - leto izdelave: 1998 Tehnični podatki - Tlak: 630 kN - Hod: 12 - 120 mm - Število hodov: 30 - 130 /min - Najv. zaustavitveni čas: 96 ms - Izpad: 300 mm - Razdalja miza/batnica: 495 mm - Prehod med stenama ohišja: 270 mm - Površina batnice: 450 x 360 mm Nodpfx Aijyna N Ts Escw - Nastavitev batnice: 120 mm - Površina mize: 800 x 560 mm - Odprtina v mizi: Ø 100 mm - Delovna višina: 880 mm - Min. varnostna razdalja: 192 mm - Pogonska moč: 5,5 kW - Obratovalna napetost: 3x 400 V / 50 Hz - Dimenzije stroja (ŠxVxG): 1800 x 2600 x 1600 mm - Dimenzije elektro omare (ŠxVxG): 800 x 1700 x 450 mm - Teža: pribl. 5500 kg

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 4868, Funkcionalnost: popolnoma funkcionalen, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight with motor, without base: 245-295 kg Net weight of standard base (stand): 95 kg Customs tariff code: 8462.9930 TECHNICAL SPECIFICATIONS TYPE D-8 / D8-200: Maximum capacity: 8 tons Maximum shearing section for Rc=40 kg/mm²: 200 mm² Standard fixed stroke: 20 mm Variable stroke, standard range: 4-36 mm Variable stroke, extra-large range: 8-50 mm Maximum height between table (without plate) and ram: 220 mm Thickness of movable plate: 42 mm Standard hole in the plate, dia.: 50 mm Hole in the table, dia.: 60 mm Bore in the ram, dia. x depth: 38x60 mm Ram adjustment (lengthening of connecting rod): 70 mm Ram base area (width x depth): 105x90 mm Required power: 1/3 HP Flywheel dimensions, dia. x width: 410x85 mm Standard flywheel speed: 180 RPM TECHNICAL SPECIFICATIONS TYPE D-8: Distance from ram center to frame: 100 mm Gap between frame uprights: 170 mm Table surface width x depth: 270x190 mm Ncedpfx Aiow T S Tze Ejw TECHNICAL SPECIFICATIONS TYPE D8-200: Distance from ram center to frame: 200 mm Gap between frame uprights: 160 mm Table surface width x depth: 270x300 mm All technical data are provided without engagement and subject to error or omission.

Leto izdelave: 1972, stanje: rabljeno, Press force 16 t Outreach 185 mm Stroke 8–60 mm Nedpfsp Sycdsx Ai Eocw Strokes per minute 140 Ram adjustment 50 mm Table surface 500x340 mm Ram surface 230x155 mm Pass-through opening in table Ø160 mm Table height 800 mm Pass-through opening in ram Ø35 mm Machine weight approx. 1.5 t Space requirement approx. 1200x1200x2000 mm Rotary wedge clutch Machine no.: 3857 Height-adjustable table

Leto izdelave: 2003, stanje: rabljeno, Pressure: 100 t Nedpfx Aera Rr Eoi Eocw Stroke: 10–130 mm Strokes per minute: 30–90 spm Throat depth: 330 mm Ram adjustment: 100 mm Table area: 950 x 660 mm Ram area: 540 x 440 mm Through-hole in table: Ø 230 mm Table height: 1000 mm Pin hole in ram: Ø 50 mm Total power requirement: 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation GSW feed straightener VRMA 40/78, year of manufacture 2003 Feed control HDS 50 BSA decoiler NO20/400V-AP

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Pressing force: 2,000 kN Table area: 2,300 x 1,100 mm (W x D) Die opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Side passage: 740 mm Installation height: 550 mm (stroke bottom, adjustment top) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Design features: • Control system Siemens + Beckhoff • 8-point sliding guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Control system Siemens + Beckhoff • Beckhoff panel for visualization • T-slots in table and ram (28mm, 300mm spacing) • Vibration-damping machine feet • 4 pcs. tool clamps + 4 pcs. cam outputs • Ram with 20mm wide central groove • Hydraulic tool clamping device on table and ram • Hydraulic roll blocks for tool change Strip feeding line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 – S Load capacity: 5,000 kg Strip width: 100 - 600 mm Expanding range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion via sliding wedges • Back support disc and 3 pcs. detachable guide arms at front • Hydraulically operated and driven hold-down roller, lateral adjustment via handwheel • Loading saddle (stationary, decoiler moves hydraulically), lift height 770 mm with 4 pcs. limiting rods Straightening machine Type: RMBMZ 50.600 UF Strip width: 40 - 600 mm Strip thickness: 0.5 – 4.0 mm Straightenable cross-section: 1,200 mm² Number of rollers: 9 pcs. Straightening roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Design features: • Rollers hardened, ground and hard-chrome plated Ncodpfov T Anlsx Ai Eow • Drive of lower straightening rollers and feed rollers by gear transmission • Motorized adjustment of roller stand via motors, setting accuracy 1/100 mm, values can be saved • Upper rollers can be lifted by 100mm • Feed roller pneumatically liftable • Lateral strip guide at inlet with handwheel and leadscrew • Exit roller basket and loop bridge • Loop control by ultrasonic sensor • Infeed assist, hydraulically operated, consisting of table with extendable tongue and upper bending roller Roll feed Strip width: max. 600 mm Design features: • Rollers hardened, ground and chrome plated • Driven by gear motor • Upper roller can be hydraulically lifted • Height adjustment hydraulic • Lateral strip guide at the infeed with handwheel • Roller basket Further features: • Pneumatically swiveling loop bridge between straightening machine and feeder • Safety fence around the complete system • Decoiler and straightener mounted on a common base frame • Various spare rollers for the straightener The complete system is still powered on and can be inspected at the seller's site!!