Hensel nakup rabljenega (14)

Stanje: pripravljen za uporabo (rabljen), Ekscentrična stiskalnica, Eisenwerk Hensel EBU 15, Rabljeni stroj Proizvajalec: Eisenwerk Hensel Model: EBU 15 Dimenzije: Širina: 800 mm Globina: 1100 mm Višina: 1800 mm Tlačna sila: 15 ton Dolžina hoda: 4–70 mm Udari na minuto: 140 spm Velikost mize: pribl. 430 × 395 mm Velikost T-utora: 165 × 160 mm Itodpfxjxfk Adj Ah Dsn Višina mize od tal: 560–735 mm nastavljivo Poraba energije / motor: 1,0–1,2 kW Teža: 0,9 ton

Stanje: rabljeno, Leto izdelave: 1996, Tlak 16 t Hod 4 - 70 mm Število hodov 140 /min Izrast 200 mm Vgradna višina 365 mm Površina mize 420 x 390 mm Prehodna odprtina v mizi 160 x 120 mm Višina mize nad tlemi 650 - 840 mm Isdjwc U Iuspfx Ah Dstn Nastavljiva miza 190 mm Plošča bata 160 x 125 mm Nastavitev bata 80 mm Pogonska moč 2,2 kW Teža 1,4 t Potrebni prostor (ŠxDxV) 1,0 x 1,6 x 2,0 m Dovoljeno za ročno vstavljanje po CE standardu Z motorjem, hidravlično kombinacijo sklopke/zavore, mehanskim preobremenitvenim varovanjem v batu, ročnim nastavljanjem hoda, ročnim nastavljanjem bata, nastavljivo mizo, motornim centralnim mazanjem, dvoročnim upravljanjem.

Stanje: rabljeno, Double Column - EBU Punching Press - Eisenwerk Hensel Type HK 130 Z Eccentric Punching Press, Eccentric Press Machine No. P 54096 / 96 Year of manufacture: 1996 Pressing force: 130 tons Table size: 1200 x 880 mm Stroke adjustment: 8 to 140 mm Ram adjustment: 100 mm Ram surface: 1150 x 800 mm Table opening (support edge): 450 x 350 mm Table opening (drop-through hole): 440 x 235 mm Upright width: 1200 mm Upright width (across): 595 mm Installation height at max. ram stroke TDC: max. 510 mm (ram adjustment at the top) Installation height at max. ram stroke BDC: max. 370 mm (ram adjustment at the top) Strokes: 40–120 strokes/min Table height above floor: 900 mm Main drive motor power: 15 kW Hydraulic power: 2.2 kW Total current consumption: 40 amps Power supply: 400 Volt, 50 Hz - Hydraulically actuated multi-disc wet clutch and spring-applied safety brake - Infinitely variable drive control via frequency inverter (120 spm at 80Hz) - Hydraulic overload protection - Automated stroke adjustment - Motorized ram height adjustment with digital actual value display - Pneumatic, infinitely adjustable ram counterbalance - Free-standing electrical cabinet (120 x 40 cm x height 220 cm) - Two-hand electrical operation for stroke release - Movable plexiglass safety door on the operator side, with pneumatic opening - Lubrication unit for circulating oil lubrication (fixed to the machine) - Hydraulic unit for the clutch-brake combination (fixed to the machine) - UNIDOR APS-Mini tool monitoring, free-standing - Operating instructions and press documentation available as PDF - Electrical schematic available Included: EBU roller feed unit type EVS 320 Order No.: ZT01054949 / 96 Year of manufacture: 1996 Strip width: 320 mm Strip thickness: max. 4 mm Strip cross-section: max. 1000 mm² - Feed control via SIEMENS machine control - Feed length programmable via roller feeder - Feed control console with Siemens S5 control and OP 15, free-standing Space requirement for press with feeder L x W x H: 380 x 180 x 375 cm Space requirement for electrical cabinet L x W x H: 125 x 41 x 200 cm, approx. 450 kg Transport dimensions of machine with electrical cabinet and dismantled drive motor L x W x H: 400 x 230 x 343 cm Height with drive motor: 375 cm Iedpfxewa D Npo Ah Dotn Height without drive motor: approx. 343 cm Weight: 18 tons Good condition

Stanje: pripravljen za uporabo (rabljen), A Hansel eccentric press is available. Pressing force: 50 tons, stroke: 8mm–120mm, strokes per minute: 115, ram adjustment: 70mm, throat depth: 255mm, installation height: 380mm, table dimensions (X/Y): 640mm/500mm, table adjustment: 220mm, ram dimensions (X/Y): 550mm/170mm. On-site inspection is possible. Iedpfx Ahjwlihnj Dstn

Stanje: rabljeno, Leto izdelave: 1969, Pressing force: 50 t Throat depth: 260 mm Stroke: 8 - 120 mm Strokes per minute: 100 Distance between table and ram, large stroke at top, upper adjustment: 410 mm Table surface: 650 x 500 mm Table opening: 250 x 180 mm Table height above floor: 740 - 980 mm Table adjustable: 240 mm Isdpfx Ahevzxr No Djtn Ram surface: 400 x 180 mm Ram adjustment: 70 mm Drive power: 2.2 kW Weight: 2.3 t Space requirements (W x D x H): 1.2 x 1.4 x 2.3 m Permitted only with safety tooling or fixed guarding according to German accident prevention regulations (UVV) Equipped with motor, wrap-spring clutch, mechanical overload protection in the ram, manual stroke adjustment, manual ram adjustment, adjustable table Sold as is, ex location, NOT commissioned Commissioning available on request (in current condition)

Stanje: rabljeno, Leto izdelave: 1977, Druck 050 t Ausladung 255 mm Hub 8 - 120 mm Itodpovzxr Aefx Ah Dsn Hubzahl 115 /min Entfernung Tisch/Stößel, gr. Hub oben, Verst. oben 380 mm Tischfläche 640 x 500 mm Durchfallöffnung im Tisch 250 x 180 mm Tischhöhe über Flur 710 - 930 mm Tisch verstellbar 220 mm Stößelfläche 550 x 170 mm Stößelverstellung 70 mm Antriebsleistung 4,0 kW Gewicht 3,1 t Raumbedarf (BxTxH) 1,5 x 1,5 x 2,3 m Baujahr 1951 - umgebaut 1977 Nur zugelassen für sicheres Werkzeug oder feste Abschirmung gemäß den deutschen Unfallverhütungsvorschriften (UVV) mit Fußbedienung mit Motor, mechanischer Überlastsicherung im Stößel, manueller Hubverstellung, manueller Stößelverstellung, verstellbarem Tisch, Hand-Zentralschmierung, Fußbedienung wie steht und liegt, OHNE in Betrieb nehmen Preis für in Betrieb nehmen (in gegebenem Zustand) auf Anfrage

Stanje: rabljeno, Leto izdelave: 1968, Pressure: 50 t Throat depth: 250 mm Stroke: 8 - 120 mm Strokes per minute: 115 Distance table/ram, max. stroke up, adjustment up: 420 mm Table surface: 645 x 510 mm Pass-through opening in table: 250 x 180 mm Table height above floor: 700 - 930 mm Table adjustable: 230 mm Ram area: 220 x 185 mm Ram adjustment: 70 mm Drive power: 3.0 kW Weight: 3.0 t Space requirements (W x D x H): 1.1 x 1.8 x 2.4 m Only approved for use with safe tools or fixed guards in accordance with German accident prevention regulations (UVV) With motor, mechanical overload protection in the ram, manual stroke adjustment, manual ram adjustment, adjustable table, foot operation As is, as seen, WITHOUT commissioning Price for commissioning (in given condition) on request Iodpfx Ahjvzxris Detn

Stanje: rabljeno, Leto izdelave: 2009, Pressure: 40 t Stroke: 4 - 100 mm Strokes per minute: 130 Throat depth: 230 mm Installation height: 475 mm Table size: 650 x 460 mm Table opening: 205 x 165 mm Table height above floor: 710 - 950 mm Itjdpevzxpnsfx Ah Dsn Table adjustment: 240 mm Ram area: 435 x 240 mm Ram adjustment: 85 mm Drive power: 5.0 kW Weight: 2.6 t Required space approx.: 1.2 x 1.7 x 2.3 m Approved for manual loading according to CE standards With motor, hydraulic clutch/brake combination, mechanical overload protection in the ram, manual stroke adjustment, manual ram adjustment, motorized central lubrication, adjustable table, two-hand and foot operation

Stanje: rabljeno, Leto izdelave: 1997, Pressure 130 t Clearance between uprights 1600 mm Stroke 8 - 140 mm Stroke rate 50 - 200 strokes/min Installation height (stroke + ram adjustment at top position) 520 mm Lateral pass-through between uprights 610 mm Table area 1600 x 880 mm Pass-through opening in table 1000 x 350 mm Table height above floor 950 mm Ram area 1600 x 880 mm Drive power 24.2 kW Machine weight approx. 28.00 t Space requirement approx. 4.3 x 2.2 x 3.8 m Ram adjustment 100 mm Approved for automatic operation according to German accident prevention regulations (UVV) Itsdpfxjvuugcs Ah Dsn with steplessly adjustable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, automatic stroke adjustment, 8-fold roller guide, electronic roll feeder (Hensel, EVX 500) with hydraulic intermediate ventilation 2025 - in progress: new control and safety electronics - Siemens S7-1500F, convenient operation via touch panel Video available from seller before dismantling

Stanje: rabljeno, Leto izdelave: 1996, Pressure: 130 t Upright distance: 1220/1070 mm Stroke: 22 - 96 mm Strokes per minute: 20 - 120 spm Installation height (stroke + slide adjustment, top): 518 mm Lateral gap between uprights: 600 mm Table area: 1220 x 880 mm Iedpfx Ahovuubyo Djtn Pass-through opening in table: 450 x 250 mm Table height above floor: 950 mm Slide surface: 1180 x 800 mm Drive power: 22.0 kW Machine weight approx. 17.50 t Space requirement approx. 3.7 x 1.75 x 3.55 m Slide adjustment: 110 mm Approved for automatic operation in accordance with German accident prevention regulations (UVV) with steplessly adjustable drive, hydraulic clutch/brake combination, hydraulic overload protection in the slide, pneumatic slide weight counterbalance, motorized slide adjustment, automatic stroke adjustment, 8-fold roller guide, electronic roll feed with hydraulic intermediate ventilation (Hensel, EVX 500)

Stanje: rabljeno, Leto izdelave: 1989, Tlak 80 t Iztek 300 mm Hod 8 - 140 mm Število hodov 60 / 90 /min Oddaljenost miza/bata, največji hod zgoraj, nastavitev zgoraj 420 mm Površina mize 800 x 600 mm Prehodna odprtina v mizi 330 x 230 mm Itsdpfx Ajvuuavjh Djn Nastavljiva miza 230 mm Višina mize nad tlemi 750 - 980 mm Površina bata 600 x 240 mm Nastavitev bata 100 mm Pogon 4,5 / 6,9 kW Teža 5,5 t Dimenzije (ŠxDxV) 1,4 x 2,5 x 2,6 m Odobreno za ročno vlaganje skladno z nemškimi predpisi o varnosti pri delu (UVV) Z motorjem z 2 številoma hodov, hidravlično kombinacijo sklopke/zavore, hidravličnim varovalom za preobremenitev na batu, ročno nastavitvijo hoda, ročno nastavitvijo bata, nastavljivo mizo, ročnim centralnim mazalnim sistemom, dvoročnim in nožnim upravljanjem Stiskalnica je na voljo za ogled v delovanju v našem skladišču.

Stanje: rabljeno, Leto izdelave: 1996, Material width: 500 mm Coil weight: 2.5 t Material thickness: 0.2 - 3.0 mm Coil inner diameter: 480 - 530 mm Coil outer diameter: 1300 mm Material cross-section: 1000 mm² Itjdovut Raspfx Ah Don Number of straightening rollers: 10 Roller diameter: 80 mm Number of feeder rollers: 2 Feeder roller diameter: 120 mm Speed: 20 m/min Drive power: 4.0 + 1.1 kW Straightening machine weight: 2.3 t Straightening machine dimensions (W x D x H): 1.4 x 2.2 x 2.0 m Decoiler weight: 0.95 t Decoiler dimensions (W x D x H): 1.5 x 1.5 x 1.95 m Straightening machine type: BRMS 4/500/10, with infinitely adjustable drive Decoiler type: BSH 3-500, with main motor with constant speed, disengageable auxiliary drive, pneumatic pressing device Loop control: light barrier Can be offered as-is, either commissioned or uncommissioned Video prior to dismantling available from seller

Stanje: rabljeno, Leto izdelave: 2000, Tlak 0,75 t izteg 295 mm dvig 16–140 mm število dvigov 75/min razdalja miza/bata, največji dvig zgoraj, nastavitev zgoraj 450 mm površina mize 800 x 595 mm odprtina v mizi 330 x 230 mm višina mize nad tlemi 745 mm površina bata 470 x 180 mm nastavitev bata 80 mm pogon 5,5 kW teža 5,0 t prostor potrebščine (ŠxDxV) 1,5 x 2,5 x 2,5 m Iedpfx Ahevut Hho Dotn prenovljeno s strani proizvajalca leta 2000 Odobreno za ročno polaganje v skladu z nemškimi predpisi o varnosti pri delu (UVV) z motorjem, pnevmatsko sklopko, mehansko varnostno zaščito za preobremenitev v batu, ročno nastavitvijo hoda, ročno nastavitvijo bata, fiksno mizo, motornim centralnim mazanjem, dvoročno in nožno upravljanje Stiskalnico si je mogoče ogledati v delujočem stanju v našem skladišču.

Stanje: rabljeno, Leto izdelave: 1978, Pressure 050 t Outreach 250 mm Stroke 8 - 120 mm Strokes per minute 100 Distance table/ram, max. stroke up, adjustment up 400 mm Table size 650 x 515 mm Pass-through opening in table 115 mm Table height above floor 790 - 1020 mm Table adjustable 230 mm Ram surface 390 x 180 mm Ram adjustment 70 mm Drive power 2.0 kW Weight 2.6 t Space requirements (W x D x H) 1.1 x 1.4 x 2.2 m Itjdpfx Asvut E Djh Djn Approved only for use with safety tooling or fixed guards in accordance with German accident prevention regulations (UVV) Comes with motor, flywheel clutch, mechanical overload protection in the ram, manual stroke adjustment, manual ram adjustment, adjustable table, foot operation Can be inspected under power at our warehouse