Robna lepilka Serija 1

HOMAG PROFI KFL 350/10/A3/WZ

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Model: BHX 500 Year of Manufacture: 2008 Working Range X: 2,500 mm Working Range Y: 1,300 mm Working Range Z: 4 - 80 mm Number of Milling Units: 2 Djdpfxsh E Sghj Apwsku Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Horizontal Drilling Spindles (X): 16 Horizontal Drilling Spindles (Y): 4 Grooving Saw: Swivels 90° X-Axis Speed: 130 m/min Y-Axis Speed: 80 m/min Z1-Axis Speed: 50 m/min Z2-Axis Speed: 27 m/min Spindle Speed: 18,000 rpm Dismantled - immediately available

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) Dkedpfxjgwbbqj Apwsu No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, številka stroja/vozila: A3347169, Funkcionalnost: popolnoma funkcionalen, število osi: 3, CNC stroj SCM, Record 100 AL action line, 3-osna linija za obdelavo lesa, 400V, leto izdelave 16/07/2008, elektro omara, upravljanje z varnostno preprogo, pregradna stena, delovna površina 305 x 122 cm, skupna dimenzija stroja: približno 565 x 250 x 260 cm, lastna demontaža 3 osi V popolnem delujočem stanju 1 velika vakuumska črpalka z belo ploščo za detajle in 1 mala vakuumska črpalka: Leto 2019 / N°A3347169 Tip VTLF2.250/0-79 Frekvenca 50/50Hz Hitrost 950/1150min-1 Potrebna moč 5,5/6,4kW Sesalna zmogljivost 244/286m³/h Največji vakuum 200/200mbar Dksdpfx Ajxg El Aopwju Na voljo je video.

Stanje: zelo dobro (rabljeno), Panel dividing saw angular system Control: OSI Plus - Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st pusher saw with grippers (qty): 5 Rotating device (for panels) up to 90° 1st panel dividing saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Waste cutting shear 2nd pusher saw with grippers (qty): 10 2nd panel dividing saw max. cutting width (mm): 2200 Dksdpfxjukhd Aj Apweu Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 No. 2 front air flotation tables (mm 2200 x 1500) Automatic unloading bridge for cut panels "RBO (BIESSE)" Model Lifter with 6 stacking positions

Leto izdelave: 2010, stanje: dober (rabljeno), USED CNC BIESSE BREMA EKO 902 INSERT TECHNICAL DETAILS: Dkedpehknbrefx Apweu 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Full protection of the operating head and the working area on the machine - Numerical control (CNC) with BIESSE Works software on Windows - Vertical panel positioning with 2 panel clamping vices - Panel feed (in the X-axis direction, on the lower support with rubber rollers), movement of clamping vices (in X-axis) for panel/workpiece fixing WORKPIECE DIMENSIONS (WORKING RANGE): - Length Min 160 mm / Max 3200 mm - Width Min 35 mm / Max 900 mm - Thickness Min 8 mm / Max 80 mm WORKING UNITS: - No. 1 vertical spindle (electrospindle) ER32 (4.5 KW) with inverter (up to 18000 RPM) - No. 1 circular saw (for grooves), 120 mm diameter (fixed on X-axis) - No. 13 independent vertical drilling spindles (6 on X-axis + 7 on Y-axis) - No. 8 independent horizontal drilling spindles (3+3 on X-axis and 1+1 on Y-axis) - No. 1 drilling head for hinge boring - Total installed power: 20 KW AUTOMATIC DOWEL INSERTION UNIT ON BOTH SIDES WITH PRESSURE PUMP FOR GLUE APPLICATION.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Oblepilka robov BIESSE Akron 1440A Na voljo april/maj 2026 CE certifikat Leto proizvodnje: 2017 Dedpfsyh A I Ajx Apwoku Možnost pregleda stroja pred nakupom

Stanje: rabljeno, številka stroja/vozila: 005108, Položaj 1: Krožna žaga za plošče – podajanje od spredaj HOLZMA-HPP 380/43/43 + TLF Dkedpfxewuck Ij Apwsu Položaj 2: Horizontalno skladišče HOLZMA-HPP 380/43/43 + TLF

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm: 0.3 / 3 – for solid strips mm: max 1 Panel thickness (min/max) mm: 14 / 60 (LASER – Max 50) Control system: ICOS Open Feed speed m/min (adjustable): 6 – 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Panel infeed system Jointing cutter unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + premelter) 283.201 + 283.203 Gluing unit (premelter with laser) Laser System LASERLINE Spraying unit (for separating fluid) Pressure section + edge magazine for rolls (compartment No.) 36 + 12 End trim unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0°–25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour trimming unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1) max. 30 m/min Dkedpsi Hn Srefx Apwsu Multi-profile scraping unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2013, Used machine Year of manufacture: 2013 Features and Technical Specifications: - Machine fully overhauled: - new Glue Jet 301 glue system (upper part 1 mm) - all units checked - all cutters sharpened - all knives replaced - Feed speed: 10 - 18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm - Workpiece thickness: 8 - 60 mm - Edge thickness: 0.4 - 8 mm - Electrical supply for variable feed: 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 controller with 15" touchscreen - ECO MODE energy-saving function - Infeed fence 1350 mm, motorized adjustment - Jointing milling unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 milling units for jointing the panel edge - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit - Edge feeder 1901 fully automatic - Glue application station Glu Jet GJ301 automatic: - 2.3 kW, 50 Hz - Granulate storage hopper - Pressure section 1913 MOT - End trimming unit 1918 (60 mm) pneumatic - Multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left rotation with CM-technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right rotation with CM-technology - Scraper unit 1929 MOT2: - HW reversible carbide inserts for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Dksdpszlbpzjfx Apwju Location: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 2014, skupna višina: 2.800 mm, skupna dolžina: 10.300 mm, skupna širina: 2.450 mm, Barva: Siva Dkjdsytcl Iopfx Apwju Lastna teža: 6.600 kg Cena: Na povpraševanje - Letnik: 2014 - Dokumentacija na voljo: Ne - CE-oznaka: Da - CE-certifikat: Ne - Serijska številka: AA2/002546 - Število vreten za rezkanje [kos]: 1 - Vreteno za rezkanje 1: - Število nadzorovanih osi [kos]: 5 - Največja hitrost vrtenja vretena [rpm]: 24.000 - Nazivna moč glavnega motorja [kW]: 11 - Vrsta mize za rezkanje: Miza s prečnim nosilcem - Sistem za pritrditev orodja: HSK-F63 - Sistem za pritrditev materiala: Pnevmatični - Vreteno za vrtanje: Da - Nazivna moč motorja [kW]: 3 - Horizontalna vretena za vrtanje [kos]: 6 - Vertikalna vretena za vrtanje [kos]: 10 - Število položajev za menjalnik orodja [kos]: 24 - Sistem/programska oprema: Xilog plus - Varnostni element: Stikalo za blokiranje vrat, varnostna svetlobna pregrada, varnostna ograja - Vakuumska črpalka: Da - Število [kos]: 1 - Znamka: Becker - Tip: Vtlf 250 - Letnik: 2008 - Nazivna moč glavnega motorja [kW]: 5,5 - Premer priključka [mm]: 70 - Brez olja: Da - Orodje vključeno: Da - CNC možnosti: Transportni trak, ročno upravljanje - CNC dokumentacija: USB ključek - Dolžina mize [mm]: 5200 - Širina mize [mm]: 1300 - Napetost [V]: 400 - Poraba električne energije [A]: 64 - Transportne dimenzije: 10300 mm x 2450 mm x 2800 mm (d x š x v) - Transportna teža [kg]: 6600 kg - Transportni paketi [kos]: 1 Finančne informacije Davek na dodano vrednost: Navedena cena je brez davka na dodano vrednost Davek na dodano vrednost/davčni sistem: Davek na dodano vrednost je odbitljiv za podjetja. Dobava in odkup so možni kadar koli za vse iz industrijskega sektorja. Yorick Diebels