Enostranski stroj za robove

HOMAG KAL 310/8/A20

Stanje: rabljeno, Power control PC 22 Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Feed speed up to: 24 m/min Working height electronically adjustable via CNC Motorized pressure belt with increased pressure Panel support guide Side roller track with running rollers for panel support Rectifying unit Heating lamps for panel edge warming Edge tape magazine with 6 positions and automatic edge change via CNC Gluing unit for EVA hotmelt adhesive with premelter and glue pot Edge pressure unit for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with 2 motors and automatic tilt adjustment Guedpfjgiyn Iex Aa Ueg Overlap milling unit with 2 motors Gluing unit with 2 tilting motors, electronically adjustable via CNC Multifunctional 4-motor corner unit (trimmer + rounder) with numerical control, automatic Space available for optional additional working unit Edge scraper unit Oscillating brush unit

Leto izdelave: 2000, stanje: dober (rabljeno), Barberan Laminating Line For all inquiries, please contact 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum length: approximately 600 mm Stepless speed adjustment from the brushing machine, maximum speed 20 m/min. The line includes: - Tommassini automatic loader (out of order) - Top-and-bottom brushing machine Guodpjilqvrefx Aa Usg - Pre-heating lamps before the adhesive rollers (top and bottom) - PVAC glue applicator - Drying lamps (top and bottom) - Steel calender roller press section - Additionally, the line is equipped with an upper surface corona treater (operational) – allows for single-sided lamination with PP films

Stanje: zelo dobro (rabljeno), Single-sided Edge Bander (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 80 Edge thickness in strips/bands (min/max) mm: 0.4 / 20 Control system: NC21 Feed speed m/min: 18 Top pressure: V-belt driven Adjustable fence: CNC-controlled Jointing milling unit: 2 x 3 kW Gluing unit (Hot Melt + Pre-melter): A20 + A34 Edge pressure zone "C" Edge magazine for rolls (compartment no. 1) End trimming unit WK 14 (2 kW, 0.8 to 12,000 rpm), electro-pneumatic adjustment, chamfer/straight Gusdpfsl Iz Tuox Aa Ueg Pre-milling unit Optimat (2 x 1.5 kW) Milling unit MF20 (2 x 0.55 kW) Profile copying milling unit FF12 (4 x 0.4 kW), CNC (WD40) Free space for profiling scraper unit Finishing unit (Flat scrapers + Buffing unit) FA 10

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 0-200-03-8334, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 24 m/min, model krmilnika: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Feed speed: 24 m/min MACHINE DETAILS Control system: Power Control PC 22 Supply voltage: 480 V Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Fuse: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Gusdpfx Aajydiymj Ujg Working height electronically adjustable via CNC Motorized rubberized pressure belt Panel support guide Side roller conveyor with free-running rollers for panel support Sanding unit Lamps for preheating panel edge 6-position coil holder magazine with automatic edge change via CNC Gluing unit for EVA hot-melt adhesive with premelter and glue pot Pressure station for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with 2 motors and automatic tilt adjustment Overlapping trimming/milling unit with 2 motors Adhesive/milling unit with 2 tiltable motors, electronically adjustable via CNC Multifunctional 4-motor corner rounding unit (scraper + rounding) with numerical control, automatic adjustment Space reserved for possible installation of an additional working unit Edge scraping unit Oscillating brush unit

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Max. working width: 1000 mm, feed rate: 5–20 m/min, height: 2200 mm, length: 4000 mm, weight: 3.3 t, complete with documentation, regularly maintained. Guedpfx Aaei E Trpo Ujg

Stanje: rabljeno, Leto izdelave: 2005, Enostranski robni lepilni stroj, namenjen natančnemu in stabilnemu lepljenju masivnih in ploščnih materialov (iverne plošče, MDF, laminat). Stroj je oblikovan kot kompaktna, a popolnoma opremljena rešitev za malo- in srednjeserijsko proizvodnjo s poudarkom na kakovosti obdelave robov. Masivni litoželezni okvir zagotavlja visoko togost stroja in dolgoročno geometrijsko stabilnost. Stroj je opremljen s klasičnim neprekinjenim transporterjem s pritisnim trakom in popolnim naborom obdelovalnih agregatov za končno obdelavo roba v enem prehodu. Tehnična sestava stroja: Predrezkalna enota Ogrevanje materiala Samodejni dozirnik EVA lepila Gsdpfx Aeyfw Sysa Ueug Nanašalni valj EVA Odrezovalne žage (sprednja in zadnja) Groba rezkalna enota Zaokroževalna enota Radijska strgala Strgalo za lepilo Rezkalni agregat za utore Krtačna enota Povratni transporter

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Gjdpeiidm Njfx Aa Ueug Location: ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2023, Spoštovani stranke! Za hitro in zanesljivo obravnavo vaše zahteve vas prosimo, da nas kontaktirate predvsem po e-pošti. Na ta način lahko vaše vprašanje takoj usmerimo k ustrezni kontaktni osebi, zberemo vse informacije in dokumente ter obdelamo vašo zahtevo čim prej. Veselimo se vaše obvestila in vam z veseljem pomagamo! Vedno na zalogi, na voljo v levi in desni izvedbi z motorično napravo za čiščenje. Riedex DM-200 Moč motorja: 4,0 kW Pripravljeno za priključitev. Pakirano na paleti! Pripravljeno za pošiljanje. Na voljo tudi z JET-napravo za čiščenje. Možnih je več različnih izvedb ..... - z rotacijsko pregrado (po želji s podvozjem) - z briketirno stiskalnico Gsdpfxjku Aibe Aa Ujug itd.

Stanje: novo, volumenski pretok: 0,984 m³/h, Atlas Copco G7FF 500 L Screw Compressor – NEW Specification: Godjhkttpspfx Aa Uoug • Condition: New • Manufacturer: Atlas Copco • Output: 984 l/min • Main motor power: 7.5 kW • Tank capacity: 500 l • Maximum working pressure: 10.0 bar • Integrated refrigerated dryer • Electronic control of compressor operating parameters • Soundproof enclosure (only 67 dB) • CE compliant • User manual in Polish • Weight: 227 kg Additional information: • Manufacturer’s warranty available upon commissioning by an authorized Atlas Copco service provider • Available within 7 working days

Stanje: rabljeno, TECHNICAL DATA - Number of Axles: 3 MAIN SPINDLE - Spindle Nose: A2-8" - Spindle Drive Power: 26 kW - Spindle Speed: 3000 rpm - Max. Bar Diameter: 91 mm - Max. Machinable Diameter: 430 mm - Max. Swing over Bed: 650 mm - Minimum C-Axis Resolution: 0.001° TURRET - Number of Positions: 12 - Number of Driven Positions: 12 - Travel X/Z: 245/1040 mm Gjdpfxowyx Rnj Aa Usug - Tool Type: BMT65 - Driven Tool Speed: 5000 rpm - Driven Tool Power: 5.5 kW TAILSTOCK - Tailstock Type: Numeric - Taper Type: MT4 - Tailstock Travel: 966 mm - Quill Stroke: 100 mm ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Power Consumption: 41 kW WEIGHT AND DIMENSIONS - Footprint: 3780 x 1610 mm - Machine Height: 1937 mm - Machine Weight: 6500 kg MACHINE HOURS - Operating Hours: 0 h ACCESSORIES - Control System: Siemens 828D - Interfaces: Ethernet / RS232 / USB / PCMCIA - Teach-In Programming: SHOPTURN - 3-color Status Light - Coolant Tank * with High Pressure Pump: 10 bar * with Rinse Gun - Chip Conveyor - Tool Measuring Probe - Parts Catcher - Bar Magazine Preparation - Preparation for Steady Rest - 3-jaw Chuck: SAMCHULLY 305 mm