Holzkraft Asa 2403 nakup rabljenega (214)

Stanje: novo, Leto izdelave: 2022, Suction nozzle diameter: 200 mm Nominal air flow rate: 2800 m³/h Chip collection bag volume: 2 x 120 l Filter cleaning: manual Ijdsv R U H Uopfx Agpja Motor power: 2.2 kW Dimensions: 1500 x 500 x 2100 mm (L x W x H) Weight: 53 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, 3 vreče za ostružke po 175 litrov Sesalni nastavek 200 mm Volumski pretok 3.300 m³/h Moč motorja 3 kW Filtrirna površina 3 x 2,2 m² Odsesovalna naprava je bila uporabljena le enkrat kot izposojena Iodpoxvxncjfx Agpoa

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 2803 Iedpfxohk S Sdo Agpea Mobile, with 180° rotatable extraction unit For chips from milling, planing, and sawing (not suitable for dust) 180° rotatable extraction unit allows for extraction guidance from below or above Robust metal impeller Supplied as standard with high-quality undercarriage for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-layered Dimensions and Weights Chip collection volume: 2 x 120 l Outer diameter of inlet extraction nozzle: 203 mm Outer diameter of outlet extraction nozzle: 1 x 100, 2 x 120 mm Length approx.: 1500 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 53 kg Electrical Data No-load speed: 2950 RPM Input power: 2.2 kW Connection voltage: 400 V Network frequency: 50 Hz Filter Filter surface: 2 x 1.92 m² Noise Emission Maximum sound pressure level: 87.5 dB(A) Airflow Nominal airflow: 2800 m³/h Maximum negative pressure: 1900 Pa Scope of delivery: Two filter bags, two chip bags Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2022, HOLZKRAFT Raw Air Extraction System ASA 7703 Mobile chip extraction unit with swiveling extraction module and 4 extraction ports Ø 100 / 120 mm for milling, planing, and saw chips (not suitable for dust) Nominal air flow: 7,700 m³/h Extraction port outlet: 1 x Ø 100 mm | 3 x 120 mm Extraction port inlet: 1 x Ø 260 mm Vacuum: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Chip bag volume: 2 x 290 litres Power consumption: 4.8 kW | 400 V - 50 Hz Isdpewhui Ajfx Agpja No-load speed: 2,950 rpm Sound pressure level: max. 98.3 dB(A) Dimensions (LxWxH): 1900 x 670 x 2800 mm Weight (net): approx. 88 kg Includes 2 fine filter bags and 2 chip collection bags Availability: short notice Location: Flörsheim

Stanje: novo, Leto izdelave: 2025, Suction nozzle diameter: 200 mm / 2 x 100 mm Iedpfx Agjv N Tydjpsa Rated air flow: 1900 m³/h Chip bag volume: 1 x 110 l Filter cleaning: manual Motor power: 1.5 kW Machine dimensions: 1000 x 500 x 2100 mm (L x W x H) Weight: 39 kg

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 1903 Mobile, with 180° rotatable extraction unit For milling, planing and saw chips (not suitable for dust) 180° rotatable extraction unit allows for suction from below or above Robust fan impeller made of metal Supplied with a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bag Fine filter bag, double-woven Dimensions and Weights Chip collection volume: 110 l Outer diameter extraction nozzle inlet: 203 mm Outer diameter extraction nozzle outlet: 1 x 100, 1 x 120 mm Length approx.: 1000 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 39 kg Electrical Data No-load speed: 2950 min¯¹ Power consumption: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 1.92 m² Noise Emission Max. sound pressure level: 85.7 dB(A) Iodehk S Shepfx Agpea Airflow Nominal airflow: 1900 m³/h Max. negative pressure: 1700 Pa Scope of delivery: Filter bag, chip bag Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2022, HOLZKRAFT Raw Air Extraction Unit ASA 7703 Mobile chip extraction system with a rotatable extraction unit and four extraction nozzles Ø 100 / 120 mm for milling, planing, and sawing chips (not suitable for dust) Rated air flow: 7,700 m³/h Extraction nozzle outlet: 1 x Ø 100 | 3 x Ø 120 mm Extraction nozzle inlet: 1 x Ø 260 mm Vacuum: max. 2,800 Pa Filter surface area: approx. 11.96 m² (2 x 5.98 m²) Chip bag volume: 2 x 290 litres Power consumption: 4.8 kW | 400 V - 50 Hz No-load speed: 2,950 rpm Iedpjwhui Nofx Agpoa Sound pressure level: max. 98.3 dB(A) Dimensions (LxWxH): 1,900 x 670 x 2,800 mm Weight (net): approx. 88 kg Includes 2 fine filter bags and 2 chip collection bags Availability: short-term Location: Flörsheim

Stanje: novo, Leto izdelave: 2025, Suction nozzle diameter: 260 mm Rated volumetric flow: 7,700 m³/h Chip bag volume: 2 x 290 l Filter cleaning: manual Motor power: 4.8 kW Dimensions: 1,900 x 670 x 2,800 mm (L x W x H) Isdpfx Agohw I Szjpea Weight: 88 kg

Stanje: novo, Leto izdelave: 2025, Chip Extraction Device ASA 4303 Mobile unit with 180° rotatable extraction assembly Designed for milling, planing, and saw chips (not suitable for dust) 180° rotatable extraction unit enables chip removal from below or above Robust metal impeller Standard equipped with a high-quality chassis for increased stability and easy maneuverability Quick-release fasteners for filter and chip collection bags Fine filter bag, double woven Dimensions and Weights Chip collection volume: 2 x 215 l Extraction inlet diameter (outer): 260 mm Extraction outlet diameter (outer): 2 x 100, 2 x 120 mm Length approx.: 1700 mm Width/depth approx.: 600 mm Height approx.: 2400 mm Weight approx.: 69 kg Ijdpfshk S Sljx Agpsa Electrical Data No-load speed: 2950 rpm Motor power: 3.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 2.4 m² Noise Emission Max. sound pressure level: 89.9 dB(A) Airflow Rated airflow: 4300 m³/h Max. vacuum: 2000 Pa Scope of Delivery: Two filter bags, two chip collection bags Location: Ex-stock 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2021, - Odpraševalnik do 160 mm Iodpow I Uukefx Agpoa

Stanje: novo, Leto izdelave: 2025, Raw Air Extraction Unit ASA 203 With standard chassis Dimensions and Weights Chip collection volume: 175 l Inlet extraction port (external diameter): 200 mm Length approx.: 1061 mm Width/depth approx.: 577 mm Height approx.: 2300 mm Weight approx.: 60 kg Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Filter Filter surface area: 2.2 m² Noise Emission Max. sound pressure level: 84 dB(A) Iedshk S Szspfx Agpja Volume Flow Rate Rated air flow: 2500 m³/h Suitable for milling, planing, and sawing chips (not dust) Significantly reduced dust content thanks to BIA-tested filter material with high separation efficiency Housing components and impellers made from high-strength special plastic Quick-release fasteners for easy maintenance of filter and chip bags Robust, high-quality construction Easy maneuverability thanks to swivel castors Low power consumption Extraction system complies with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit Without extraction hose

Stanje: novo, Leto izdelave: 2021, Razstavni eksponat Leto izdelave: 2021 Dimenzije in teža Dolžina (izdelek): cca 1700 mm Širina/globina (izdelek): cca 600 mm Višina (izdelek): cca 2400 mm Teža (neto): cca 69 kg Prostornina zbiralnika za ostružke: 2 x 215 l Nazivni premer zunanjega sesalnega priključka vhod: 260 mm Nazivni premer zunanjega sesalnega priključka izhod: 2 x 100 mm, 2 x 120 mm Električni podatki Število vrtljajev v prostem teku: 2950 min⁻¹ Priključna napetost: 400 V Omrežna frekvenca: 50 Hz Priključna moč: 3,8 kW Izhodna moč: 3 kW Filter Filtrirna površina: 2 x 2,4 m² Isdpew I Uuwsfx Agpja Emisije hrupa Najvišja raven zvočnega tlaka: 89,9 dB(A) Volumenski pretok Nazivni volumenski pretok: 4300 m³/h Maksimalni podtlak: 2000 Pa Obseg dobave: fini filtrirni vreči, dve vreči za ostružke Dobavljivost: takoj Lokacija zaloge: Hochheim

Stanje: novo, Leto izdelave: 2025, Raw Air Extraction Unit ASA 163 with standard chassis Dimensions and Weights Chip collection volume: 175 l Nominal diameter (outside) of extraction inlet: 160 mm Length approx.: 1096 mm Width/Depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter surface area: 2.2 m² Noise Emission Maximum sound pressure level: 83 dB(A) Airflow Iedshk S S Eepfx Agpoa Nominal air flow rate: 2200 m³/h Suitable for milling, planing, and sawdust (not for fine dust) Significantly reduced dust content due to BIA-certified filter material with high separation efficiency Housing parts and impellers made from high-strength special plastic Quick-release fasteners for filters and chip bags for easy maintenance Robust, high-quality construction Easily maneuverable thanks to swivel castors Low power consumption Extraction units comply with Dust Class L Scope of delivery: Unit body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit without extraction hose

Stanje: novo, Premična odsesovalna naprava Ijdpow I Uu Rofx Agpoa Razstavni eksponat Dimenzije in teže Dolžina (izdelek) pribl. 1000 mm Širina/globina (izdelek) pribl. 500 mm Višina (izdelek) pribl. 2100 mm Teža (neto) pribl. 39 kg Prostornina zbiralnika ostružkov 110 l Nazivni zunanji premer odsesovalnega nastavka – vhod 203 mm Nazivni zunanji premer odsesovalnega nastavka – izhod 1 x 100, 1 x 120 mm Električni podatki Št. vrtljajev v prostem teku 2950 min¯¹ Priključna napetost 230 V Omrežna frekvenca 50 Hz Priključna moč 1,5 kW Izhodna moč 1,05 kW Filter Filtrirna površina 1,92 m² Emisija hrupa Najvišja raven zvočnega tlaka 85,7 dB(A) Volumski pretok zraka Nazivni volumski pretok 1900 m³/h Največji podtlak 1700 Pa Obseg dobave: fini filtrirni vreča, vreča za ostružke Razpoložljivost: takoj Lokacija skladišča: Hochheim

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 7703 Mobile, with 180° rotatable extraction module Suitable for milling, planing, and sawing chips (not suitable for fine dust) 180° rotatable extraction unit allows extraction from below or above Iedpfohk S Stsx Agpea Robust metal impeller Standard with high-quality chassis for improved stability and easy maneuverability Quick-release fasteners for filter and chip bags Fine filter bag, double woven Dimensions and Weights: Chip collection volume: 2 x 290 l Suction port diameter (inlet): 260 mm Suction port diameter (outlet): 3 x 120, 1 x 100 mm Length approx.: 1900 mm Width/depth approx.: 670 mm Height approx.: 2800 mm Weight approx.: 88 kg Electrical Data: No-load speed: 2950 rpm Power consumption: 4.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter: Filter area: 2 x 5.98 m² Noise Emission: Maximum sound pressure level: 98.3 dB(A) Airflow: Nominal air volume: 7700 m³/h Maximum negative pressure: 2800 Pa Scope of Delivery: Two filter bags, two chip bags Location: Available from stock 54634 Bitburg - Available at short notice -

Stanje: novo, Leto izdelave: 2022, Extraction unit Previously used for demonstration purposes Year of manufacture: 2022 Not tested for dust extraction Suitable for shavings from milling, planing and sawing High-quality, stable chassis for easy maneuvering Double-woven fine filter bag For chips from milling, planing, and sawing (not suitable for dust) Extraction unit rotatable by 180° allows extraction from below or above Stable metal impeller Standard-equipped with high-quality chassis for better stability and easy handling Quick-release closures for filter and chip bag Double-woven fine filter bag Scope of delivery: Two filter bags, two chip collection bags Nominal air flow: 2800 m³/h Max. negative pressure: 1900 Pa Filter area: 2 x 1.92 m² Chip collection volume: 2 x 120 l Nominal outer diameter of extraction inlet: 203 mm Nominal outer diameter of extraction outlets: 1 x 100 mm, 2 x 120 mm No-load speed: 2950 rpm Pack size: 1 Dimensions and weights Length: approx. 1500 mm Width/depth: approx. 500 mm Height: approx. 2100 mm Weight: approx. 53 kg Electrical data Iedew I Uvnjpfx Agpsa Rated power: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Noise emission Max. sound pressure level: 87.5 dB(A) Availability: short notice Location: Hochheim

Stanje: novo, Leto izdelave: 2025, Raw Air Extraction Unit ASA 141 With standard mobile chassis Dimensions and Weights Chip collection volume: 175 l Nominal diameter outside extraction inlet: 140 mm Length approx.: 1062 mm Width/depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical Data Connection voltage: 230 V Mains frequency: 50 Hz Filter Filter area: 1.9 m² Isdpfx Agjhk S Swopja Noise Emission Maximum sound pressure level: 78 dB(A) Airflow Nominal air flow rate: 1650 m³/h For chips from milling, planing, and sawing processes (not for dust) Significantly reduced dust content thanks to BIA-tested filter material with high separation efficiency Housing parts and impellers made from high-strength specialty plastic Quick-release fasteners for filter and chip collection bags for simple maintenance Robust, high-quality construction Easy to maneuver thanks to swivel castors Low power consumption Extraction unit complies with dust class L Scope of delivery: Unit body with assembled fan module Filter bag / extraction unit Chip collection bag / extraction unit without extraction hose

Stanje: novo, Premična odsesovalna naprava Razstavni eksponat Dimenzije in teže Dolžina (izdelek) pribl. 1000 mm Širina/globina (izdelek) pribl. 500 mm Višina (izdelek) pribl. 2100 mm Teža (neto) pribl. 39 kg Prostornina zbiralnika ostružkov 110 l Nazivni zunanji premer odsesovalnega nastavka – vhod 203 mm Nazivni zunanji premer odsesovalnega nastavka – izhod 1 x 100, 1 x 120 mm Električni podatki Št. vrtljajev v prostem teku 2950 min¯¹ Priključna napetost 230 V Omrežna frekvenca 50 Hz Priključna moč 1,5 kW Izhodna moč 1,05 kW Filter Filtrirna površina 1,92 m² Emisija hrupa Najvišja raven zvočnega tlaka 85,7 dB(A) Isdpfxew I Uvbe Agpoa Volumski pretok zraka Nazivni volumski pretok 1900 m³/h Največji podtlak 1700 Pa Obseg dobave: fini filtrirni vreča, vreča za ostružke Razpoložljivost: takoj Lokacija skladišča: Hochheim

Stanje: rabljeno, Leto izdelave: 2021, Year of manufacture: 2021 Iodpfjwb Ekdsx Agpsa Dimensions and Weights Length (product): approx. 1,700 mm Width/Depth (product): approx. 600 mm Height (product): approx. 2,400 mm Net weight: approx. 69 kg Chip collection volume: 2 x 215 l Nominal diameter outside extraction connection (inlet): 260 mm Nominal diameter outside extraction connection (outlet): 2 x 100 mm, 2 x 120 mm Electrical Data No-load speed: 2,950 rpm Connection voltage: 400 V Mains frequency: 50 Hz Input power: 3.8 kW Output power: 3 kW Filter Filter surface area: 2 x 2.4 m² Noise Emission Maximum sound pressure level: 89.9 dB(A) Airflow Nominal air flow: 4,300 m³/h Maximum negative pressure: 2,000 Pa Scope of Delivery Fine filter bag, two chip collection bags Availability: short-term Location: Flörsheim

Stanje: novo, New machine Mobile Extraction Unit Isdpfxswb Ehpj Agpja Dimensions and Weights: Length (product): approx. 1000 mm Width/Depth (product): approx. 500 mm Height (product): approx. 2100 mm Net weight: approx. 39 kg Chip collection volume: 110 l Nominal outside diameter, extraction port (inlet): 203 mm Nominal outside diameter, extraction port (outlet): 1 x 100 mm, 1 x 120 mm Electrical Data: No-load speed: 2950 rpm Supply voltage: 230 V Mains frequency: 50 Hz Power consumption: 1.5 kW Output power: 1.05 kW Filter: Filter area: 1.92 m² Noise Emission: Max. sound pressure level: 85.7 dB(A) Airflow: Nominal air flow: 1900 m³/h Max. negative pressure: 1700 Pa Scope of Delivery: Extraction unit, fine filter bag, chip bag Availability: short notice Stock location: Hochheim

Stanje: novo, Leto izdelave: 2021, New machine Year of Manufacture: 2021 Features and Technical Data: Dimensions and Weights Length (Product) approx. 1170 mm Net Weight approx. 660 kg Width/Depth (Product) approx. 1003 mm Dust Extraction Connection Extraction port diameter (thicknessing) 150 mm Installation Information Required space length: 1170 mm Machine body width/depth: 705 mm Required space width/depth: 1003 mm Working area length: 1000 mm Required space height: 1197 mm Working area width/depth: 2000 mm Explanation of required space: The dimensions take into account the maximum travel distances or note regarding working area. Please add the specified dimensions to the required space to determine the recommended unobstructed area for installation. Machine body length: 1170 mm Ijdpfokwg Unjx Agpsa Thicknessing Details Thickness table length: 520 mm Max. working height (thicknessing): 250 mm Thickness table width: 1000 mm Min. working length (thicknessing): 210 mm Min. working height (thicknessing): 3.5 mm Max. cutting depth (thicknessing): 8 mm Electrical Data Drive motor output: 7.5 kW Mains frequency: 50 Hz Connection voltage: 400 V Cutterhead type: TERSA Cutterhead speed: 4500 rpm Cutterhead diameter: 120 mm Max. planing width: 520 mm Number of planer knives: 4 pcs. Feed speed: 5/8/12/18 m/min Location: Flörsheim Availability: Short notice

Stanje: novo, With a 520 mm planing width, motorized thickness table adjustment, and convenient switching - Robust steel and cast iron construction - Large, ribbed surfacing tables made from cast iron - Smooth running operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Sectional pressure bar at infeed - Precision bearing four-knife cutterhead - Helical-toothed steel infeed roller for especially uniform and gentle wood feed - Outfeed roller with rubber coating - Large surfacing fence, tiltable from 90 to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-changeover system with pneumatic lifting and lowering of the surfacing table - Extraction connection remains in the same position for both surface and thickness planing—no need for additional hoses or awkward switching/routing around the machine Scope of delivery: Technical Data: Dimensions and Weights: Length (product): approx. 2300 mm Width/Depth (product): approx. 1100 mm Weight (net): approx. 980 kg _____ Surfacing: Total table length: 2300 mm Iodjxnqyhjpfx Agpoa Infeed table length: 1200 mm Working height: 930 mm Max. depth of cut, surfacing: 6 mm Surfacing fence length: 1200 mm Surfacing fence height: 190 mm Fence tilt range: 90 – 45° _____ Extraction Connection: Extraction port diameter (thicknesser): 120 mm _____ Installation Information: Space requirement length: 2300 mm Space requirement width/depth: 1610 mm Space requirement note: The dimensions account for maximum movement or workpiece length. Machine body length: 1235 mm Machine body width/depth: 850 mm Working area length: 1000 mm Working area width/depth: 3500 mm Working area note: Please add these dimensions to the space requirement to get the recommended clearance for the machine. _____ Thicknessing: Min. working height (thickness): 3.5 mm Max. working height (thickness): 250 mm Max. depth of cut, thicknessing: 8 mm _____ Electrical Data: Motor power: 7 kW Supply voltage: 400 V Line frequency: 50 Hz _____ Cutterhead: Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of knives: 4 Cutterhead speed: 5000 rpm Max. planing width: 520 mm _____ Feed: Feed speed: 5/8/12/18 m/min

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AB00021322, skupna širina: 1.820 mm, skupna višina: 1.960 mm, skupna dolžina: 1.650 mm, delovna širina: 1.100 mm, skupna masa: 1.160 kg, moč: 11 kW (14,96 KM), dolžina brusnega traku: 1.900 mm, višina obdelovanca (maks.): 170 mm, širina brusilnega traku: 1.115 mm, vhodna napetost: 400 V, - The calibration and fine sanding machine LIBRA 35 is an extremely versatile and multi-purpose machine. - Robust, tube-reinforced monoblock steel machine body with high-mounted working units for maximum rigidity. - Operator-friendly thanks to a clearly arranged control panel on the front side. - Motorized table height adjustment. - Digital display for working height. - Electronically controlled sanding belt oscillation with reduced compressed air requirement. - Automatic star-delta start for the main motor. - Natural rubber feed belt with negative profile. - Support table with two rollers at the infeed and outfeed of the feed belt. - Feed belt drive by gear motor with two speeds. - Flexible steel pressure rail in front of the first unit. Iedpfswwkuyjx Agpsa - Rubber pressure rollers in front of and behind each working unit. - Pneumatic belt tensioning for each unit, with decimal adjustment option for grit/belt thickness.

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2023 Approximate length: 2300 mm Approximate width/depth: 1100 mm Approximate weight: 980 kg Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1200 mm Fence height: 190 mm Planer fence swivel range: 90 - 45° Extraction port diameter (thicknessing): 120 mm Main motor: 7 kW Required length (installation space): 2300 mm Required width/depth (installation space): 1610 mm Note on required space: The dimensions account for maximum travel paths or usable lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Note on working area: Please add the specified dimensions to the installation space to calculate the recommended free area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Type: TERSA Isdpfsxtgz Eox Agpoa Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5000 rpm Maximum planing width: 520 mm Feed speed: 5/8/12/18 m/min Availability: short-term Location: Solingen

Stanje: novo, Robust craftsmen's machine with a spindle moulder that can be tilted 45° to both sides and MK4 interchangeable spindle. - Stable steel/cast iron construction - Dynamically balanced milling unit anchored to the worktable - Particularly robust design - Smooth operation due to precision assemblies and high intrinsic weight - Standard features include forward/reverse rotation and electronic interlock during direction change - Five speeds from 3000 to 10000 rpm Iodpfexnqx Rex Agpoa - Convenient speed change from the machine side - Standard with MK4 interchangeable spindle system - Large cast iron worktable for lasting precision - Easy operation via controls and speed display at the machine front - Large-dimensioned fence with fine adjustment and aluminium fence jaws as standard - Fence adjustment via hand crank, with digital numerical display - Numerical indicator for set spindle height, precise to 0.1 mm - High-performance industrial motors Scope of supply: Technical data: Dimensions and weights: - Weight (net): approx. 510 kg _____ Extraction connection: - Extraction nozzle diameter at fence: 1 x 120 mm - Extraction nozzle diameter at machine: 2 x 80 mm _____ Worktable: - Table length: 2500 mm - Table width: 810 mm - Table height: 923 mm _____ Installation information: - Explanation of required space: Dimensions consider maximum travel or usable length. - Working area length: 3700 mm - Working area width/depth: 5000 mm - Explanation of working area: Please add the specified dimensions to the required space to calculate the recommended free installation area for the machine. _____ Equipment: - Fence: Heavy-duty professional version with aluminium fence jaws and fine adjustment, front adjustment by hand crank with digital indicator - Curved milling guard: YES - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual height and tilt adjustment of milling unit - Control elements’ position: on the machine body - Table: table extension left and right and pull-out workpiece support (total width 2500 mm) _____ Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW _____ Milling spindle: - Spindle tilt: -45° to +45° - Usable spindle length: 140 / 180 mm - Explanation for usable spindle length: 30–35 mm spindle Ø / 40–50 mm spindle Ø - Milling spindle stroke: 90 mm - Interchangeable spindle: MK4 - Spindle speeds: 3000/4500/6000/8000/10000 rpm _____ Max. milling tool diameters: - Max. retractable tool diameter: 320 x 60 mm - Max. profile milling diameter: 250 mm - Max. tenoning diameter: 350 mm - Max. form milling diameter: 160 mm