Namizni rezkalni stroj

Holzkraft Casadei F 25 LL-FK

Stanje: dober (rabljeno), Lesni drobilnik na prodaj Pripravljen za transport s transportnim trakom Idealen za drobljenje ostankov lesa (vse vrste mehkega lesa) in palet Vključno s hidravličnim potisnikom Gedoxbyx Topfx Ahbekd Motor: 7,5 kW Širina rotorja: cca 82 cm Teža: 1.460 kilogramov Polna obremenitvena toka: 32 A Predvarovalka: 35 A

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Spindle swivel: Yes, 0 to 45° Height adjustment: Handwheel / electric Swivel adjustment: Handwheel / electric Cutter fence adjustment: manual Height display: digital readout Swivel angle display: digital readout Fence display: mechanical counter Gsdpfouzkxxjx Ahbskd Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 rpm Motor power: 7 kW Motor brake: Yes, automatic Extraction port: 2 x 120 mm Machine length: 2599 mm Machine depth: 900 mm Weight: 655 kg

Stanje: novo, Leto izdelave: 2026, Construction size: 4 Nominal heat output: 116 kW -- Complies with BImSchV Stage 2 and CE standards -- Godpfx Aodlhcdehbekd Combustion chamber fully lined with chamotte Suitable for rooms up to: 2,900 m³ (according to DIN) Fuel types: firewood, chipboard, wood chips, briquetted wood shavings Fuel consumption: 30 - 35 kg/h Blower air output, free blowing: 7,500 m³/h Outlet opening: Ø 600 mm Flue gas connection Ø 220 mm Weight: 1,550 kg PLC control cabinet: 380 Volt

Stanje: novo, With air flow rates of up to 22,000 m³/h, the stationary compact filter systems of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in various production areas and industries, including larger processing machines. Eligible for BAFA funding according to Module 4. ECO JET series units are equipped with clean-air side fans that draw dust- and chip-laden air to the filter unit. The high-performance DUO models feature two fans operating in parallel. A flange at the filter unit inlet allows for connection of custom pipe diameters. The aerodynamically optimized airflow in the separation chamber ensures that coarse particles are separated directly before reaching the filter bags. Remaining dust collected by the filters is automatically cleaned off by the AL-KO OPTI JET® filter cleaning system; the separated material is discharged into mobile collection containers beneath the filter. Applications: - Extraction at production machines, machining centers, pipe systems with multiple suction points Godjwwtuispfx Ahbekd - Direct extraction for continuous operation - Suitable for industries such as wood processing, joineries, carpentry workshops, furniture manufacturing, plastics production and processing, paper production, orthopedics industry, and many others Advantages: - Wide range of standard extraction systems with numerous customer-specific customization options - Consistently high suction power thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings, since 100% recirculation mode is possible in many cases - Compact design requiring minimal space - Suitable for indoor and outdoor installation - Available in ATEX-compliant configurations - Comprehensive accessories and numerous options for individual system configuration - Eligible for BAFA funding according to Module 4

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Gkedpeqlckpefx Ahbed Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Altendorf F45 Elmo 3-osni upravljanje Dolžina vozička: 3200 mm Širina reza na vzdolžnem prislonu: 1300 mm Predrezilo: Pripravljeno Gedpfxsy Sbvks Ahbekd Višinsko nastavljanje žaginega lista: električno / pozicijsko upravljanje Nagibno nastavljanje žaginega lista: električno / pozicijsko upravljanje Širinski prislon: električno / pozicijsko upravljanje Nastavitev dolžinskega prislona: ročno Prikaz kota žaginega lista: digitalni prikaz Prikaz višine reza: digitalni prikaz Dolžinsko merilo z funkcijo za poševen rez: da Premer žaginega lista: 450 mm Število obratov: 4 Moč motorja: 5,5 kW Priključek za odsesavanje: 80 in 120 mm Duplex kotni prislon Leto izdelave: 2010 Cena: 15.500 €

Stanje: novo, Delovna dolžina: 2750 mm Delovna višina: 2500 mm Gib delovne mize: 300–1000 mm RUCHSER miza za stekljenje in zapiranje RU-SW3-90° ----- Vertikalna delovna miza z dvigalom in napravo za obračanje. Posebej primerna za stekljenje in dvostransko zapiranje lesenih oken. Oprema: Del delovne površine, obložen s filcem Stopenjsko nastavljivo pnevmatsko dvigalo Gib od 300 mm do 1000 mm, glede na višino valjčnega sistema Naprava za obračanje za dvostransko zapiranje, z valjčnim sistemom 150 mm Dolžina valjčnega sistema 2 pnevmatska pritrdilna mehanizma za pritrditev okna na napravo za obračanje Izvedba s specializirano napravo za obračanje za potiskanje okna, postavljenega na valjčni sistem, pri zaprti (zaprti) napravi za obračanje Alternativna/neobvezna oprema na zahtevo! Št. 1.0: Številka artikla: 100000 RU-SW3-90° vertikalna delovna miza za lesena okna z napravo za obračanje za stekljenje in dvostransko zapiranje Dolžina kota: 1970 mm, odpiralni kot: 90°, maks. Delovna širina: 2750 mm, skupna dolžina: 3050 mm, Skupna širina: 780 mm, višina delovne površine: 1600 mm, površina delovne površine z filcem, na levi ALI desni strani en valj kot zaščita roba za elemente do 2500 mm višine. Pnevmatsko dvigalo od 300 do 1000 mm. Površina za postavitev kot valjčni sistem z jeklenimi valji, dolžina in razdalja valjev 200 mm. ----- Skupna cena v tej izvedbi: na zahtevo! ----- Možnosti z dodatnimi stroški: Št. 1.1: Številka artikla: 5202 738,00 EUR/kos Del delovne površine z valji iz gume, premer 48 mm, razdalja med valji 50 mm, za RU-SW3-90° in RU-SWS3 Št. 1.2: : Številka artikla: 7081 420,00 EUR/kos Jekleni kot, oblložen s filcem, nameščen nad letevmi valjev, za RU-SW3-90° Te preprečujejo "hrup" oken pri potiskanju. Dodatne letve so nameščene nad vsemi letevmi valjev RU-S2. Št. 1.3: : Številka artikla: 5056 141,00 EUR/kos RU-AK-6 predalnik 1000x120 mm, 6 predalov, za obešanje na valjčni sistem ----- Skupna cena v tej izvedbi: na zahtevo! Cena iz tovarne, plus embalaža in poštnina, plus zakonski DDV. PDF-brošuro si oglejte v prilogi. Gjdoxmk D Rspfx Ahbskd (Tehnični podatki po navedbah proizvajalca - brez jamstva!)

Stanje: rabljeno, Leto izdelave: 2019, Highly flexible vertical machining center for milling, drilling, and cutting. The BREMA patent for processing. Due to its vertical orientation, this machine series is the most flexible and productive machine of its kind, achieving an extremely high quality standard. In addition, the automatic return/rotation system for the panels ensures fully automatic operation. It is possible to work on all 6 sides of the panel at a height of up to 1300 mm. Working dimensions: * Length: 300 - 2500 mm * Height: 60 - 1300 mm * Thickness: 10 - 80 mm * Maximum weight: 50 kg Machine programming and control system operated via PC - TPA Albatros software. The programming editor, featuring a high-level software interface, allows for simple, intuitive machine programming and also offers: * Linear, circular, and spiral interpolation * Double zero point * Mirror program management * Turret tool diameter optimizer * Independent spindle diameter optimizer * DXF file conversion (geometric conversion) * Import of worklists in ASCII format * Additional key for office-based programming * Barcode scanner * 17-inch LCD monitor * Professional operating system Windows 7 Panel feeding and handling via motorized vertical transfer with rollers and rubber-coated pressure units for securing the panel during processing. Includes a motorized conveyor carpet length of 2000 mm, with electronically adjustable speed via converter. Photo sensors and NC program ensure sequential feeding of one or multiple panels as selected by the operator. Height reading system for panels consisting of an independent axis capable of reading the panel height before loading into the machine. Reading tolerance for dimension: +/- 0.15 mm. If the tolerance is exceeded, a message is displayed and the operator and machine stop the active operation. Panel thickness reading system using a mechanical probe. Gkjdel Ikzgjpfx Ahbod Horizontal vice – M.O. axis: allows the program to determine the workpiece thickness. Vertical vice – M.V. axis: allows the program to determine the workpiece height dimension. Chain - X axis: Patented double section with laser photo sensors capable of reading the reference zero point prior to machining operations. The double section allows machining on the underside of the panel, permitting processing of all 6 panel sides. Brushless motors with programmable speed control via NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch, arranged as follows: * 7 spindles oriented on X axis * 17 spindles oriented on Y axis Powered by a high-frequency motor, which enables spindle rotation changes up to 7,000 rpm. The brushless motor allows control of drilling depth and feed speed. Upper turret milling group with 10 positions and NC-controlled tool change. 11 kW motor with direct motion transfer to the tool up to 18,000 rpm. The turret rotates via a controlled axis with a brushless motor, enabling...

Stanje: rabljeno, številka stroja/vozila: 008479, Maksimalna obdelovalna širina: 1650 mm Minimalna obdelovalna debelina: 3 mm Delovna miza: fiksna višina Gkedpjy Edqwjfx Ahbed Podtlakna preproga: da Število delovnih enot: 4 kos

Stanje: novo, Krtačilni postarevalnik Sarmax CHEYENNE SP2 600 Delovna širina: 600 mm Največja delovna višina: 300 mm Gsdpfx Ahjyf Dcljbokd Transportni pas z nastavljivo hitrostjo: 3–15 m/min V kompletu jeklena krtača in Tyneks krtača Skupna moč: 9 kW Tehnična dokumentacija CE certifikat Tovarniško nova naprava, na voljo po naročilu