Stacionarna odsesovalna naprava

AL-KO ECO JET

Stanje: rabljeno, Leto izdelave: 2023, Used installation Year of construction: 2023 Condition: as new, system has only a few operating hours Equipment and technical data: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and chips - Fan: 2 x 7.5 kW - Airflow: 10,000 m³/h - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs, each 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter load: 129 m³/(m²xh) - Filter cleaning: AL-KO OPTI JET® - Pressure relief area: 0.84 m² (bursting disks) - Base frame with discharge hopper and rotary valve; dry discharge system with C-coupling Consisting of: - ECO JET DUO 6 UPPER SECTION, 2 x 7.5 KW: Clean air filter unit; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; including pressure relief area and Dry discharge system with C-coupling; Codpfjyk I U Ajx Af Dsgu without filters and control system; including pressure transducers - ECO JET DUO 6 ZWR XL – 1100 MM: Extension ring for increasing height/expansion with 2 suction inlets for extraction stubs - Substructure with discharge hopper and built-in rotary valve 960/1 FG: For chip disposal via customer-provided transport fan into an existing silo or similar; Transport duct DN 200 mm, approx. 1,260 mm length under rotary valve; connection to customer’s transport duct Rotary valve certified according to ATEX directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor power: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class/construction: IP 54 / B3 Insulation class: F Speed: 41 rpm Throughput*: 15,744 l/h* No. of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pieces required Filter BIA Category ‘M’ – electrically conductive; 2.50 m length, incl. support cages; 77.6 m² filter area - Suction stub 400 mm: with non-return flap in rectangular duct - ECO JET non-return flap 910x346x500 mm - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency converter up to max. 37 kW; suitable power modules and controls as well as the frequency converter are included in the base unit; the frequency converter is installed in the control cabinet. Cascade control with frequency converter handover: Fan 1 runs on the frequency converter; when the threshold value is reached, it switches to mains operation; fan 2 takes over the frequency converter and adjusts as required. Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault message Display of fault message in clear text on the display and collective fault lamp on the door Manual start of discharge via display button Start cleaning via differential pressure Manual cleaning start via button Post-cleaning Fire protection monitoring

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, NC-controlled drilling and dowel insertion machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: max. length 600 mm Equipment: - Horizontal drilling unit with 3 individually selectable spindles, spindle pitch 32 mm - 1 dowel insertion tool (positioned 32 mm from the first drilling spindle) - Glue nozzle with adjustable glue quantity - Glue flow monitoring Codpexdl Raefx Af Degu - Mist oiler for glue nozzle - Standard dowel dimension: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feeding 1. BASE MACHINE - Sturdy steel frame construction - Axis movement in X, Y, and Z directions - Ball screw (Y and Z axis) and rack-and-pinion drive (X axis) - Digital AC servo motor - Support table with left and right side stops and rear stop rail - Center stop pneumatically lowerable, manual actuation via selector switch - 6 top hold-down cylinders, manually adjustable - Centralized lubrication system power control PC85T Modern control system based on Windows PC

Leto izdelave: 1998, stanje: dober (rabljeno), Sawdust extractor, dust extraction unit, self-cleaning negative pressure filter ALKO ECO JET The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high unit efficiency. It is perfectly suited for all types of dry dust in various technological processes. Filter bags can be exchanged according to specific requirements and applications. Year of manufacture: 1998 5.5 kW fan positioned on the clean air side, which minimizes the risk of explosion initiation. Inlet diameter: 250 mm Capacity: 4,320 m³/h Filtration surface: 29 m² Vacuum: 3,700 Pa Codpfsiu Hq Dox Af Dogu "Fireman" extinguishing system Air return ATEX-certified safety flap Fire protection flap Noise damper "Fireman" extinguishing system Control cabinet with automation for starting up to 8 machines Technical documentation included Extractor dimensions: Height: 3.05 m Base width: 2.75 m x 1.00 m

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, 1x Focus S70 CPO The item is used, fully refurbished, newly calibrated and certified. Scope of delivery: 1x Focus S 70, measurement rate up to 976,000 points per second, HDR photography, GPS, compass, altimeter (barometer), two-axis compensator and WiFi, protection class IP54, 1x battery, 1x charging dock, 1x 90W power supply, 1x 32GB SD card, 1x SD card reader, 1x SD card case, sturdy transport case, calibration certificate, 1-year manufacturer's warranty, Codpfjq Tpumsx Af Degu quick start guide. On-site registration, accuracy +/- 1 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Filter za izsesavanje prahu in žagovine. Cgodpfetzld Usx Af Dou

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Spindle swivel: Yes, 0 to 45° Height adjustment: Handwheel / electric Swivel adjustment: Handwheel / electric Cutter fence adjustment: manual Height display: digital readout Swivel angle display: digital readout Fence display: mechanical counter Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 rpm Motor power: 7 kW Motor brake: Yes, automatic Extraction port: 2 x 120 mm Machine length: 2599 mm Cgodpfsuzkxxjx Af Deu Machine depth: 900 mm Weight: 655 kg

Stanje: dober (rabljeno), Leto izdelave: 2000, Weinig High Mech E6 vnos + A5 iznos + zlagalnik 1. Weinig valjčni transportni trak za dovod paketov. 2. Weinig nagibni sistem za pakete. Csdpfxswgbw Re Af Dsgu 3. Weinig prečni transportni trak z ravno verigo in enojnim podajalnikom desk. 4. Weinig sortirna enota za izločanje z valjčnimi tirnicami. 5. Weinig EM814 dovedna enota za skobeljni stroj z ravno verigo za podajanje. 6. Weinig izhodni pasovni pospeševalni transporter, dolžine 3 m. 7. Valjčni transportni trak s prečnimi potisniki na verigi. 8. Weinig prečni pasovni transportni trak z zalogovnikom. 9. Weinig zlagalnik z ravno verigo in dvižno škarjasto valjčno progo. 10. Weinig izhodni valjčni transportni trakovi za pakete. Možna dodatna ponudba z dodatnim Weinig vezalnim sistemom po potrebi.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, potrebna širina: 3.200 mm, zahteva za prostor dolžina: 1.200 mm, potrebna višina: 2.100 mm, skupna masa: 170 kg, skupna širina: 3.200 mm, skupna dolžina: 1.700 mm, notranja širina: 1.500 mm, HEAVY DUTY Drying Trolley / Cantilever Trolley – Built for the Toughest Requirements Key Facts at a Glance: 1. Ball bearing guide rail for width adjustment from 1.70 to 3.00 m span 2. Space-saving, nestable design 3. Generous 135 mm clearance between levels for easy loading, even at fast cycle times 4. Upright square tube rail for minimal contact surface 5. Large usable depth of 1,000 mm 6. High payload capacity of 1,000 kg 7. Premium-quality rollers – easy to move, even when fully loaded Simply high quality, "made in Denmark". The trolleys are generally available directly from stock. To save shipping costs for our customers, we deliver the trolleys pre-assembled (see picture). Setup is quick and easy. Do you have questions? Contact us – we are happy to help! Cedpfx Afefiuhvo Dsgu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X Cjdpjx D H Hcofx Af Degu • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Stanje: novo, Leto izdelave: 2025, Genie Z-45FE hybrid articulated telescopic boom lift, new, used, and demo machines available Cedpornqpwsfx Af Dsgu