Homag Kal nakup rabljenega (488)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0-200-03-8334, hitrost pomika os X: 24 m/min, višina obdelovanca (maks.): 60 mm, model krmilnika: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Feed speed: 24 m/min MACHINE DETAILS Control system: Power Control PC 22 Supply voltage: 480 V Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Fuse: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Cedpfx Afjydiymjxepu Working height electronically adjustable via CNC Motorized rubberized pressure belt Panel support guide Side roller conveyor with free-running rollers for panel support Sanding unit Lamps for preheating panel edge 6-position coil holder magazine with automatic edge change via CNC Gluing unit for EVA hot-melt adhesive with premelter and glue pot Pressure station for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with 2 motors and automatic tilt adjustment Overlapping trimming/milling unit with 2 motors Adhesive/milling unit with 2 tiltable motors, electronically adjustable via CNC Multifunctional 4-motor corner rounding unit (scraper + rounding) with numerical control, automatic adjustment Space reserved for possible installation of an additional working unit Edge scraping unit Oscillating brush unit

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 29.000 h, Funkcionalnost: nepreverjeno, hitrost pomika os X: 25 m/min, skupna dolžina: 7.755 mm, višina obdelovanca (maks.): 40 mm, delovna višina: 950 mm, model krmilnika: PowerControl PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Maximum feed rate with FK11: 20 m/min Working height: 950 mm Minimum workpiece width (for workpiece thickness 12-22 mm): 60 mm (depending on workpiece length) Minimum workpiece width (for workpiece thickness 23-40 mm): 105 mm (depending on workpiece length) Workpiece projection: 30 mm Workpiece thickness: 12 - 40 mm Edge material (coil): 0.3 - 3 mm Maximum edge cross-section (PVC): 135 mm² Maximum edge cross-section (veneer): 100 mm² Maximum coil diameter: 830 mm Edge material (strips): 0.4 - 20 mm Maximum edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Pneumatic connection: 7 - 8 bar Total length: 7,755 mm Operating hours: approx. 29,000 h EQUIPMENT Scissor-type workpiece support with roller support, extendable by 1000 mm Automatic infeed fence adjustment Fixed stop on the left side Pneumatically controlled infeed lock Upper pressure by powered combination V-belt Electric height adjustment Workpiece transport system via transport chain with rubber pads Release agent spray unit (top/bottom) Joint milling unit 2 x 3 kW Gluing unit A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick-change system, 2-roller magazine, pressure zone C (automatically adjustable, with 1 pre-press roller and 6 post-press rollers) End trimming unit HL84 0.8 kW, with automatic adjustment for bevel/straight as well as pneumatic adjustment for flush/overhanging trimming Pre-milling unit 1.5 kW, pneumatic adjustment for flush/overhanging milling Contour milling unit FK11 with automatic adjustment from bevel to radius milling Profile scraper PN10 (with pneumatic retraction for lateral offset) Finishing unit (with pneumatic retraction for lateral offset), consisting of glue joint scraper and buffing unit Remote control Workpiece guide for FK device Cpodpfxoyc S Haj Afxju Note: Container loading and seaworthy packaging by the seller is not possible.

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, regularly serviced (last maintenance by Homag in 11/2024) Equipment and technical data: Cpedpfx Afewx Aaqexeu - Minimum workpiece thickness: 12 mm - Maximum workpiece thickness: 60 mm - Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) - Edge thickness min: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max: 3 mm (coil material) / 20 mm (strip material) - Feed speed: infinitely variable, 18–25 m/min (frequency controlled) - Adhesive type: EVA hot-melt glue - Glue application (pot / cartridge / nozzle): melting unit with granulate container - Glue capacity / cartridge size: granulate container, melting performance 18–35 kg/h, level regulated - Heat-up time: approx. 8–10 min - Edge magazine (slots): 2 rolls (automatic roll change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: cross-cutting unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: profile milling unit FK13, automatic 8-position tool changer (R = 2 mm) - Chamfer / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in finishing unit FA11 - Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW - Workpiece preheating: available - Release agent spray unit: top / bottom, type 2929 (F.01) - Extraction ports: several Ø 100 mm (individual extraction for each unit) - Control system: powerControl PC22 (industrial PC, woodCommander on Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant according to EC Directive 98/37/EC Dimensions / Space required: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system shown in the pictures is not included in the scope of delivery! Availability: short-term Location: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 2005, Enostranski robni lepilni stroj, namenjen natančnemu in stabilnemu lepljenju masivnih in ploščnih materialov (iverne plošče, MDF, laminat). Stroj je oblikovan kot kompaktna, a popolnoma opremljena rešitev za malo- in srednjeserijsko proizvodnjo s poudarkom na kakovosti obdelave robov. Masivni litoželezni okvir zagotavlja visoko togost stroja in dolgoročno geometrijsko stabilnost. Stroj je opremljen s klasičnim neprekinjenim transporterjem s pritisnim trakom in popolnim naborom obdelovalnih agregatov za končno obdelavo roba v enem prehodu. Cpsdjyfw Syjpfx Afxeu Tehnična sestava stroja: Predrezkalna enota Ogrevanje materiala Samodejni dozirnik EVA lepila Nanašalni valj EVA Odrezovalne žage (sprednja in zadnja) Groba rezkalna enota Zaokroževalna enota Radijska strgala Strgalo za lepilo Rezkalni agregat za utore Krtačna enota Povratni transporter

Stanje: rabljeno, številka stroja/vozila: 005385, Type of applied edge: thin edge, thick edge, solid wood Glue system: EVA, laser Jointing cutters: yes Cpsdpjg Iy Dujfx Afxou Multi-function unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 8 units

Stanje: rabljeno, številka stroja/vozila: 006253, Type of applied edge: thin edge, thick edge, solid wood Glue application system: EVA, PUR Jointing cutters: yes Multi-function unit: yes Maximum feed speed: 40 m/min Maximum panel thickness: 60 mm Codpfxol Txxge Afxopu Working units: 10 pcs

Stanje: rabljeno, številka stroja/vozila: 006252, Type of applied edge: thin edge, thick edge, solid wood Glue application system: EVA, PUR Cpodowcyckjpfx Afxou Jointing cutters: yes Multi-function unit: yes Maximum feed speed: 40 m/min Maximum panel thickness: 60 mm Working units: 10 pcs

Stanje: rabljeno, številka stroja/vozila: 006432, Tip pritrjene obrobe: tanka obroba, močna obroba Lepljenje: EVA Codpfxjt Hmq Hj Afxepu Spojno rezkanje: da Multifunkcijska enota: da Zgornja rezkalna enota: da Maks. podajalna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 9 kos

Stanje: rabljeno, številka stroja/vozila: 006375, Tip nameščenega roba: tanek rob, močan rob Lepilni sistem: PUR Spojno rezkanje: da Večnamenski agregat: da Cjdpfx Afsp Apx Toxjpu Maks. podajalna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 9 kos

Stanje: rabljeno, številka stroja/vozila: 006042, Tip nameščene obloge: tanka obloga, močna obloga Leplilni sistem: EVA Spojno rezkanje: da Večnamenski agregat: da Zgornji rezkalni agregat: da Cpsdpfowacqlex Afxju Maks. hitrost podajanja: 25 m/min Maksimalna debelina plošče: 40 mm Delovni agregati: 9 kos

Stanje: rabljeno, številka stroja/vozila: 004592, Tip nalepljenega roba: tanek rob, močan rob, masivni les Sistemsko lepljenje: EVA Cpodpfx Afowcmxlexju Predfrezanje: da Multifunkcijska enota: da Maks. podajna hitrost: 24 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 8 kos.

Stanje: rabljeno, številka stroja/vozila: 008246, Položaj 1: Enostranski robilni stroj HOMAG-KAL 310 + ZHR 05 Položaj 2: Povrat plošč HOMAG-KAL 310 + ZHR 05 Cjdpfx Aex A Hi Iefxopu

Stanje: rabljeno, številka stroja/vozila: 007176, Tip pritrjene obrobe: tanka obroba, močna obroba Cpedpfeybaw Djx Afxju Lepljenje: EVA Spojno rezkanje: da Multifunkcijska enota: da Zgornja rezkalna enota: da Maks. podajalna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 9 kos

Stanje: rabljeno, številka stroja/vozila: 007575, Type of applied edge: thin edge, thick edge Adhesive system: EVA Joint milling: yes Multifunctional unit: yes Csdpeybawwsfx Afxopu Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 8 pcs

Stanje: rabljeno, številka stroja/vozila: 006849, Type of attached edge: thin edge, thick edge, solid wood Gluing system: EVA Jointing milling: yes Multifunction unit: yes Codpfxswd Itmo Afxopu Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 7 pcs

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Ta HOMAG KAL 330/6/A3/S2 je bila izdelana leta 2009. Rabljeni robni lepilni stroj z lepilnim agregatom za EVA talilno lepilo, tlačno cono, rezalnim agregatom, kopirno rezkalno glavo, strgalo in polirnim agregatom. Vključuje sistem za vračanje obdelovancev LIGMATECH. Izkoristite priložnost za nakup tega robnega lepilnega stroja HOMAG KAL 330/6/A3/S2. Za več informacij nas kontaktirajte. Cpjdpfxoychduo Afxou

Stanje: rabljeno, številka stroja/vozila: 008244, Tip pritrjenega roba: tanek rob, debel rob Sistem lepljenja: EVA, laser Spojno rezkanje: da Multifunkcijska enota: da Maks. podajna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Csdpfxsx Swgfs Afxopu Delovni agregati: 8 kos

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE “SOFTFORMING” - Min/max edge thickness (roll material) mm: 0.3 - 3 Cjdpfxefd Ilye Afxjpu - Min/max edge thickness (strips) mm: 0.4 - 12 - Min/max workpiece thickness mm: 12-60 - Control: Power Control PC 22 - Feed speed (variable) m/min: 12 - 24 - Top pressure with a motorized timing belt - Gluing unit (hot melt adhesives and pre-melter): QE 34 / E12 - Pressure roller track (revolver) for flat and contoured panels (softforming) - Single roll magazine - End cutting unit HL 84 (2 x 0.84 kW – 12,000 rpm) - Fine trimming unit (2 x 1.5 kW – 12,000 rpm) - Milling unit (2 x 0.4 kW – 12,000 rpm) OPTIONAL: Feeding system with longer infeed and 3-wheel motorized rubber top pressure

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Control Power Control 22 Feed speed m/min 18 Cpedod Nt Nqjpfx Afxju Top pressure driven by V-belt Sprayer unit (for liquid anti-adhesive) Adjustable stop ruler CNC controlled Jointing milling unit 2 x Kw 3 Bonding unit (P.U.R. adhesive + pre-melter) QA 34 + PU 34 Edge pressure zone (CNC controlled) "A" Edge magazine for rolls (compartment No. 12) End trimming unit HL 84 (2 x Kw 0.22) pneumatic (2 pos.) Pre-milling unit Optimat (2 x Kw 0.55) Multifunction unit (radius milling and profile milling) FK 13 (2 x Kw 0.4) CNC (8+8) Multi-profile scraping unit (CNC controlled) MN 21 Finishing unit (flat scrapers + smoothing unit) FA 11 (pneumatic) OPTION: Return conveyor "LIGMATECH" Mod. ZHR 05 (SOFIT code: Z02007)

Stanje: rabljeno, Complete factory for furniture production, comprising: SZ0M23) Angular panel saw "GIBEN" Type 17 (mm 5700x2700) with stacking system "SIRIO" SZ0M25) Panel saw "GIBEN" Mod. GammaDue (mm 3800x2200) SZ0M26) Panel saw (multi-blade saw) "GABBIANI" (finished panels mm 4250 x 2120) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (film lamination/glue on paper) SZ0M29) Press line "COLOMBO REMO" (mm 1400x9600) for paper/veneer/laminated materials SZ0M30) Press line "FRIZ" (mm 1400x6200) for paper/veneer/laminated materials SZ0M41) Double-sided edge banding and sizing line "IMA" Combima with high-speed automatic handling "RBO-BIESSE" SZ0M42) Double-sided edge banding and sizing line "IMA" Combima Softforming with a second double-sided edge banding and sizing machine "STEFANI" and handling system "TOMASSINI" SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Mod. KAL 310 with splitter "NARDELLO" Mod. Elegance SZ0M35-36) Drilling machine "BIESSE" Techno Logic with infeed system and stacker "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling "RBO-BIESSE" SZ0M37) CNC machining center "MORBIDELLI" Mod. Author 600 KL SZ0M56) Reel slitting and winding machine "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cross-cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" Cedecr U Urspfx Afxepu SZ0M07) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Pre-assembly line for honeycomb panels SZ0M18) No. 6 multi-opening press "COLOMBO REMO" (mm??x mm??) SZ0M21) Sizing and calibration line for honeycomb panels "GABBIANI + CELASCHI+ELMAG+ COSTA LEVIGATRICI" Many other machines (VITAP drilling machine, circular saws, glue application machines, etc.), extraction system, roller conveyors, racks (wall-mounted shelving), forklifts, pallet trucks, and more. The machines are still installed at the user’s site and can be inspected by appointment.

Stanje: zelo dobro (rabljeno), Double-Sided Edge Banding Machine Csdpfx Afswk Hp Toxopu - Edge Thickness (coil) (min/max) mm: 0.3 - 3 - Workpiece Thickness (panel) min./max. mm: 12 - 40 - Working Width (min./max.) mm: 250 - 2500 - PC Control: PC22 - Top Pressure System with Driven Rubber Belts - Adjustable Fence Linear Feed Rate m/min: 10 - 32 - Liquid Glue Unit - Jointing Milling Unit (vertical milling machine): 2x 4 kW at 9000 rpm - Quickmelt Hot Melt Adhesive Unit A3 - Pressure Zone C (manual adjustment) "A" - Coil Holders for 2 Rolls - End Trimming Unit: HL 84 (2x 0.22 kW at 12000 rpm) - Premilling Unit (2x 0.4 kW at 12000 rpm) - Finishing Unit (Flat Scraper Unit + Buffing Unit): FA11 - Polishing Unit

Stanje: zelo dobro (rabljeno), Single-sided Edge Bander (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 80 Edge thickness in strips/bands (min/max) mm: 0.4 / 20 Control system: NC21 Feed speed m/min: 18 Top pressure: V-belt driven Adjustable fence: CNC-controlled Jointing milling unit: 2 x 3 kW Cpsdpfx Afjl Iz Tuexeu Gluing unit (Hot Melt + Pre-melter): A20 + A34 Edge pressure zone "C" Edge magazine for rolls (compartment no. 1) End trimming unit WK 14 (2 kW, 0.8 to 12,000 rpm), electro-pneumatic adjustment, chamfer/straight Pre-milling unit Optimat (2 x 1.5 kW) Milling unit MF20 (2 x 0.55 kW) Profile copying milling unit FF12 (4 x 0.4 kW), CNC (WD40) Free space for profiling scraper unit Finishing unit (Flat scrapers + Buffing unit) FA 10

Stanje: rabljeno, številka stroja/vozila: 006374, Tip pritrjenega robu: tanek rob, debel rob Lepilni sistem: PUR Spojno rezkanje: da Večnamenski agregat: da Zgornji rezkalni agregat: da Cpedpfel Txv Eox Afxsu Maks. podajalna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 10 kosov

Stanje: rabljeno, številka stroja/vozila: 006574, Tip nanesenega roba: tanek rob, debel rob, masiven les, furnir Lepilni sistem: EVA Predfreza za spajanje: da Codsvxxuxopfx Afxopu Multifunkcijski agregat: da Največja pomična hitrost: 25 m/min Največja debelina plošče: 60 mm Delovni agregati: 7 kos

Stanje: rabljeno, številka stroja/vozila: 007227, Pozicija 1: Enostranski robni lepilni stroj HOMAG + LIGMATECH-KAL 310 + ZHR 05 Pozicija 2: Sistem za vračanje plošč HOMAG + LIGMATECH-KAL 310 + ZHR 05 Cjdpfx Afjwuuc Asxspu