Homag Kal nakup rabljenega (485)

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: AGG0213 - Koda proizvajalca: 1-056-09-3351 - Stanje: Rabljeno - Funkcionalnost: Ni preizkušeno - Združljiv stroj: - Teža: 8 kg - Dimenzije: 46x39x27 cm - V primeru interesa nudimo storitev pregleda, kontaktirajte nas. Lasdpfxjyztt Ho Abxoc

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: AGG0213 - Koda proizvajalca: 2-056-10-0220 - Stanje: Rabljeno - Funkcionalnost: Ni preizkušeno - Kompatibilni stroji: - Teža: 6 kg - Dimenzije: 36x26x21 cm - Če ste zainteresirani, nudimo storitev pregleda, kontaktirajte nas. Laodoyztr Aepfx Abxjc

Stanje: zelo dobro (rabljeno), 4-sided sizing and edge banding line Panel dimensions: min. 195 x 250 x 60 mm / max. 1200 x 2500 x 60 mm The line consists of the following machines: KZ0400a) Infeed table "HOMAG" model TBL 100/25/12/S with motorized rollers Feed speed (adjustable): 7–40 m/min KZ0400b) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 325/M1/C Feed speed (adjustable): 15–40 m/min with PC 22 SIZING UNIT: Twin hogger KD10 (2 x 6.6 kW) + gluing unit: A3 with dual roll magazine EDGE BANDING SECTION: Top and bottom flush trimming units BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), grooving unit for rabbeting and grooving UF11 (4 kW), free position, profile scraping unit PN10, finishing unit (flat scraper + buffing unit) KZ0400c) Rotating station (90° longitudinal-transverse) "HOMAG" model TDL 310 / 25 / 12 (for longitudinal to cross transfer) Lasdpfx Asiztxysbxsc Feed speed (adjustable): 20–60 m/min KZ0400d) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 326/M2/C Feed speed (adjustable): 15–32 m/min with PC 22 SIZING UNIT: Pre-milling cutter (1 x 4.5 kW), twin hogger KD10 (2 x 6.6 kW) + gluing unit: A3 with dual roll magazine EDGE BANDING SECTION: End trimming unit HL 84 (2 x 0.22 kW), top and bottom flush trimming units BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), profile trimming/copying unit FF32 (4 x 0.4 kW), free position, profile scraping unit PN10, finishing unit (flat scraper + buffing unit) MINIMUM EDGE LENGTH: 70 mm (For narrow workpieces: max. thickness 25 mm, max. edge thickness 2 mm, max. cycle rate 20 pcs/min, max. feed speed 20 m/min.)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 5.383 h, HOMAG DRILLTEQ V-200 je kompaktni in visoko učinkoviti navpični CNC obdelovalni center, zasnovan za natančne vrtalne, utorne in rezkalne operacije pri izdelavi pohištva in omar. Zaradi vertikalne obdelave zasede stroj minimalno talno površino, hkrati pa ponuja veliko prilagodljivost in produktivnost. Idealno je primeren tako za serijsko kot tudi za individualno proizvodnjo. Lodpfx Asym Ny Sobxoac Stroj je v zelo dobrem tehničnem stanju in ga je mogoče preizkusiti pod napetostjo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Prodajam vertikalni pretočni CNC rezkalno in vrtalni stroj HOMAG Weeke Drillteq V-200 (prej BHX 055), letnik 2023. Konfiguracija: Lasdpfxjy Hfp Rj Abxoc 1 kos rezkalna enota z avtomatsko menjavo orodja, 4 pozicije HSK63 13 + 4 + 2 kosov vrtalnih vreten 1 kos utorska žaga S povratno funkcijo, ki vrača elemente nazaj k operaterju ali zadaj kot pretočni stroj. Stanje kot novo. S popolno dokumentacijo in CE. Takoj na voljo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Specifikacija Dolžina: 4605 mm Debelina obdelovanca: 40 mm Lodpfxszdklco Abxsac Robni material v roli: 0,4 – 3 mm Robni material v traku: 0,4 – 3 mm Hitrost podajanja: 8 m/min Enota za utrjevanje spojev: 40 mm Enota za hitre spremembe lepilnega sistema Magazin za navit material Pnevmatska dvotočkovna nastavitev pritisne cone Enota za končno obrezovanje s pnevmatsko nastavitvijo Pnevmatska nastavitev za fino obrezovanje Enota za obrezovanje kontur Pnevmatska nastavitev enote za profilno strganje Strgalo za lepilni spoj Bufferji LED notranja osvetlitev EasyTouch nadzorni sistem Ročno centralno mazanje Ročna nastavitev zgornjega pritiska Valjčni zgornji pritisk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Specifikacija: Vertikalni vrtalni blok s 13 vreteni Horizontalni vrtalni blok s 4 vreteni v osi X Horizontalni vrtalni blok z 2 vreteni v osi Y Rezalna žaga D=100 mm Preverjanje smiselnosti Vreteno za menjavo orodja 10 kW Izmenjevalec orodij s 4 pozicijami Maks. dolžina obdelovanca 200–3050 mm Širina obdelovanca 70–850 mm Debelina obdelovanca 8–56 mm Powertouch zaslon Lajdpfozdki Ujx Abxec Woodwop za stroj Način varčevanja z energijo

Stanje: zelo dobro (rabljeno), 3-osni (X-Y-Z) CNC OBDELOVALNI CENTER Premična plošča (obdelovanec), premični delovni glavi Vertikalna plošča (obdelovanec) Krmiljenje POWERCONTROL + POWERTOUCH Programska oprema woodWOP Varnostna kabina delovne glave Št. 1 blokada za vpenjalne čeljusti obdelovanca na delovnem področju Pogon obdelovanca s transportno verigo Minimalne dimenzije obdelovanca (X-Y-Z) mm 200 x 70 x 12 Maksimalne dimenzije obdelovanca (X-Y-Z) mm 3050 x 850 x 60 Skupna priključna moč (kW) 11,5 (pribl.) DELOVNE SKUPINE: Št. 1 vrtalnih agregatov (moč (kW) 2,3) z vertikalnimi vreteni: - Št. 13 neodvisnih vertikalnih vrtalnih vreten (V13 High Speed) - Št. 6 neodvisnih horizontalnih vrtalnih vreten (4 v osi X + 2 v osi Y) Ljdpoyywcvsfx Abxeac Št. 1 rezkalna žaga za utore (za obdelave v X-osi); premer (mm) 100 Št. 1 vertikalno glavno vreteno (rezkalni agregat) HKS63 (moč kW 5) Avtomatski sistem menjave orodij – število mest v magazinu (št. 4 mest za orodja)

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC-controlled 'FLEXIBLE' MACHINING CENTER Moving table (workpiece), static working head – horizontal table (workpiece). Control system: PowerControl PC86 powerTouch (woodWOP software). Safety enclosure for the working head. No. 2 workpiece clamps for access to the working area. WEEKE pre-positioning unit for quick positioning of workpieces in the machine with clamping jaws. Support table (workpiece support) at infeed; outfeed table (with powered belt). With automatic panel pusher. Min. workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm). Max. workpiece dimensions (X-Y-Z) mm: 3000 x 1000 (optional 1300) x 80 (2 x 40 mm). Simultaneous processing of up to 2 workpieces (on the Z-axis). Ledpsyyvttsfx Abxsac Separate switch cabinet and operator console. WORKING UNITS (TOP): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW). No. 10 independent horizontal drilling spindles (8 in X + 2 in Y). No. 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm. No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW). WORKING UNITS (BOTTOM): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW). No. 10 independent horizontal drilling spindles (8 in X + 2 in Y). No. 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm. No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW).

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 60 Working width (min/max) mm: 225 / 2500 Control: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Cam spacing (mm): PROCESSING UNIT (for each side): Sprayer unit (for liquid anti-stick) Pre-milling cutter (profile trimming) 1 x kW 4.5 Chipper KD 11 (2 x kW 6.6) – free space EDGEBANDING SECTION (for each side): Gluing unit (PUR glue + premelter) QA 34 (FeMa-Tech) Pressure zone (CNC-controlled) "A" Edge magazine for rolls (compartment No. 6) End trim saw HL84 (2 x kW 0.22) 0°-30° Pre-milling unit (2 x kW 0.55) Contour milling unit (for fine trimming) CNC-controlled FK 13 (2 x kW 0.4) turret 8+8 Laedpfx Abewxwyfjxec Free space Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + smoothing unit) FA 11 OPTION: Universal milling unit for grooving/rabbetting and profiling UF11 (1 x kW 4)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED FORMATTING AND EDGE BANDING LINE (also "SOFTFORMING") with automatic conveying equipment. For panel thicknesses up to 100 mm. Comprising the following machines: W05025A) Loading Unit (Portal) "MAHROS" Model Brush W05025B) Double-sided Formatting and Edge Banding Machine "HOMAG" Model KFL 620/23/QE/30 (softforming) FORMATTING SECTION (for each side): Jointing milling unit (2 x 6.6 kW) Free space Left only: 2 x Universal milling units (rotatable) (2 x 6.6 kW) EDGE BANDING SECTION (for each side): Gluing unit (Hot melt adhesive + pre-melter) Edge magazine for rolls (compartment no. 1) Edge pressure zone for both STRAIGHT and SOFTFORMING End-trimming unit WK14 (2 x 0.8 kW) Milling unit (2 x 0.55 kW) Profile milling (copying) unit FF 12 (4 motors) WD70 Profile scraper unit PN20 Finishing unit (flat scraper + smoothing unit) FA11 Ledpfstt Dqpsx Abxsac W05025C) Stacking Unit (Portal) "MAHROS" Model Brush

Stanje: zelo dobro (rabljeno), Double-sided machine (first machine in a production line) Edge thickness in coils (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 12 / 60 Working width (min/max) mm 195 / 1500 Control system: PC 22 / Software WoodCommander Feed speed (adjustable) m/min 15 - 40 Safety and noise protection cabin FORMATTING UNIT (per side): Spray unit (for liquid non-stick agent) Chipping unit KD 10 (2 x 6.6 kW) Open station EDGE BANDING SECTION (per side): Gluing unit (PUR glue + pre-melter) QA 34 (FeMa-Tech) Pressure zone (CNC-controlled) Type A Edge magazine for coils (slot no. 6) Universal milling unit for grooving, rabbeting and profiling SF 20 (HSK63F - 4.5 kW) 0°-90° CNC horizontal Pre-milling unit (2 x 0.55 kW) Ledpswxwxbefx Abxeac Milling unit MF 21 (2 x 0.55 kW) Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + polishing unit) FA 11

Stanje: zelo dobro (rabljeno), LONGITUDINAL - TRANSVERSE ROTARY TRANSFER Equipment for placement between two double-end tenoners (or two double-sided edge banding machines) in a line (straight position) or in front of an independent double-end tenoner (or edge banding machine). Intended for rotating workpieces by 90°, ideal for transitioning from longitudinal to crosswise processing. Comes with integrated control cabinet and operator panel. Total length: 6200 mm 1st Roller Table (longitudinal) with motorized rollers: approx. 1300 x 3200 mm Motorized rotary transfer, with double cone (1 top + 1 bottom) 2nd Roller Table (transverse) with motorized rollers: approx. 2500 x 3000 mm Max. panel dimensions: 195 x 250 mm Max. panel dimensions: 1200 x 2500 mm Loded Siydepfx Abxjac Min/Max panel thickness: 12 - 40 mm Total connected load: 3 kW

Stanje: zelo dobro (rabljeno), Portal machine Movable table (workpiece), movable working head (horizontal workpiece) Control: Power Control, WoodWOP software Workpiece drive with no. 3 transport belts Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 50 Chip conveyor belt Total connected load (kW): 60 WORKING UNITS (VERTICAL): Drilling units with vertical spindles: No. 6 Independent vertical drilling spindles: No. 40 x 6 (total No. 240) Drill head power: No. 6 x 2.7 kW WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles: No. 4 (4 x 2.7 kW) Horizontal drilling spindles - right side: No. 13 x 2 (total No. 26) Horizontal drilling spindles - left side: No. 13 x 2 (total No. 26) Lodpfx Abjdg Itnoxeac High-pressure glue injection and dowel insertion nozzles (right side): No. 8 High-pressure glue injection and dowel insertion nozzles (left side): No. 8 Dowel magazine for automatic dowel feeding: No. 2

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING LINE, max. working width 2500 mm The line consists of the following machines: U06051) Motorized roller conveyor (infeed table) "HOMAG" model TBL 100/25/12/S U06052) 1st double-sided sizing and edge banding machine "HOMAG" model Profi KFL 525/8/A3/15 U06053) Rotation station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model Profi TDL 310/25/12 Lajdedg Itmjpfx Abxec U06054) 1st double-sided sizing and edge banding machine "HOMAG" model Profi KFL 526/9/A3/25

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 Ljdpfx Abedt Rgvoxoac VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12

Stanje: generalkompletno obnovljen (rabljeno), PC control type Power Control Professional Software: woodWOP / TopDrill BST No. 2 throughfeed motorized conveyor belts (4 x kW [?]) No. 2 horizontal drilling supports (digital display of position data for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the lower drilling supports Lajdodz Uk Tepfx Abxoc No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36

Stanje: zelo dobro (rabljeno), RETURN SYSTEM for Edgebanding Machine (LEFT) When combined with a single-sided edgebanding machine, this system allows a single operator to continuously feed the machine (the processed workpiece is automatically returned to the operator). Roller conveyor with 180° conveyor belts: 2600 mm x 1800 mm Ledpfogz Atbjx Abxoac 1st Conveyor line: 7000 mm x 900 mm 2nd Conveyor line: 2500 mm x 850 mm Model: BOOMERANG BONSAI

Stanje: zelo dobro (rabljeno), CNC flexible automatic through-feed drilling machine (gantry type) with dowel insertion system. Movable panel (workpiece), movable working head (horizontal panel-workpiece). Control: Power Control, Software: WoodWOP. Integrated safety cabin for the machine. Workpiece feed with triple transport belt. Feed speed (m/min): 1 – 90 (approx.). Minimum workpiece dimensions (X-Y-Z) in mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) in mm: 3000 x 1400 x 60 Maximum axis travel (X-Y-Z) in mm: 3580 x 1838 x 125 Simultaneous machining of two workpieces possible (in Y-axis): 600 mm + 600 mm Total connected load (kW): 38 WORKING UNITS – TOP SIDE: Drilling unit with vertical spindles (Qty): 1 Independent vertical drilling spindles (Qty): 38 + 3 special Independent horizontal drilling spindles (Qty): 6 Laodpfed Nvi Dox Abxec Grooving saw unit (for X-axis machining) blade diameter (mm): 100 Vertical main spindle (milling unit): 1 x SK 30 (vertical main spindle power kW 6) Automatic tool change system, carousel changer, positions: 3 WORKING UNITS – HORIZONTAL: Drilling unit with horizontal spindles (Qty): 2 Horizontal drilling spindles – right side (Qty): 13 + left side (Qty): 13 Glue injection nozzles and dowel insertion (right side): 2 + (left side): 2 Dowel magazine for automatic dowel insertion (Qty): 1

Stanje: zelo dobro (rabljeno), Portal machine Laodpfx Abogwbbqexec Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: zelo dobro (rabljeno), Complete factory for the production of furniture, consisting of: Ledpfoh T Dvtox Abxsac KZ2207) "BIESSE" FDT - CNC drilling and dowel insertion line, consisting of: Stacking station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel insertion machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) Four-side sizing and edge banding line "HOMAG", consisting of: Double stacking stations "ESSE2", 1st double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° rotation transfer (longitudinal/transversal) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° rotation transfer (transversal/longitudinal) "ESSE2", double loading stations "ESSE2" KZ2210) 'BREMA (BIESSE)' model Vektor CNC LINE drilling-milling-inserting, consisting of: Hedgehog loader (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various transfers KZ2090) Sander (veneer sander) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge banding magazines) KZ2033) Edge banding machine "HOMAG" KAL 310 with stacking infeed "ESSE2" KZ2075) Furniture assembly line "TERMOPAK" with throughfeed carcass press KZ2203) Sawing line "SALVADOR" (panel crosscut + splitter) with stacking "ESSE2" KZ2009) Veneer department (double knife veneer bundle guillotine "MONGUZZI", cross-cut shears "MONGUZZI"; splicing machine "KUPER", veneer bundle guillotine "TAGLIABUE", etc.) KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminate KZ2215) Automatic panel storage system "ESSE2" model MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, delivery vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, panel saws, adhesive applicators, etc.), extraction system, roller conveyors, racking (wall-mounted), forklifts, pallet trucks, and more. Machines are still installed at the user's site and can be inspected by arrangement.

Stanje: zelo dobro (rabljeno), CNC MACHINING CENTER (POINT-TO-POINT) - 4 Axes Gantry-type construction Control System: Power Control PC85 – Software: woodWOP Safety enclosure for the working head Clamping table with 10 consoles (1,500 mm) LASER positioning system on X-axis for console positioning and on Y-axis for the vacuum clamp positioning Automatic tool change system Lajdpfx Abor Ai Sqjxsc 2 disc tool changers – magazine positions / tool stations: W8 (8 pcs) + (3 pcs) Maximum working range (X-Y-Z): 6,000 mm x max 1,600 mm x 125 mm Number of work areas: 4 – 2 x vacuum pumps (capacity in m³/h) With separate electrical and control cabinet Total connected load (kW): 27.5 (approx.) WORKING UNITS (TOP): 21 independent vertical drilling spindles (high speed, 7,500 rpm) 10 independent horizontal drilling spindles (6 in X-axis + 4 in Y-axis) Drilling head motor power (kW): 2.3 1 vertical main spindle (milling unit), HSK 63, 9 kW 1 grooving saw unit, blade diameter 125 mm, N1 – 90° swiveling in X-Y direction

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, PLATTENAUFTEILSÄGE WINKELANLAGE Steuerung PowerControl V2.1 - CADmatic 5 (Tapio ready) Angetriebene Rollenbahnen mm 2200 x 4500 ca. Hubtisch (mm) 4300 x 2200 Lajdpsx Aqdcsfx Abxoc 1° Einschiebersäge mit Nr. 4 Spannzangen 1° Plattenaufteilsäge Max. Schnittbreite (mm) 4300 Max. Sägeblattüberstand (mm) 125 Vorritzsäge (max. Sägeblattdurchmesser / Leistung) mm 180 (Kw 2,2) Hauptsäge (Sägeblattdurchmesser max / Leistung) mm 450 (420) Kw 18 Regelbarer Sägewagenvorschub (m/min) 1 - 130 2° Einschiebersäge mit Nr. 8 Spannzangen 2° Plattenaufteilsäge Max. Schnittbreite (mm) 2200 Max. Sägeblattüberstand (mm) 125 Vorritzsäge (max. Sägeblattdurchmesser / Leistung) mm 180 (Kw 2,2) Hauptsäge (Sägeblattdurchmesser max / Leistung) mm 450 (420) Kw 18 Regelbarer Sägewagenvorschub (m/min) 1 - 130 Nr. 2 vordere Luftkissentische (2 x mm 800 x 2810) Gesamtanschlusswert A 102 OPTION: Nr. 1 Schrottschleifer

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, CNC Flexible Gantry Machine Horizontal Throughfeed Table Control System: Power Contro Open powerTouch, Software: WoodWOP (TAPIO Ready) Infeed Table (panel support) + Outfeed Table (panel support) Panel feed via 3 transport belts Min. workpiece dimensions (X-Y-Z): 250 x 100 x 12 mm Max. workpiece dimensions (X-Y-Z): 2500 x 1050 x 60 mm Special lateral guiding system for workpieces with "sensitive" edges 3 upper vertical pressure devices Powered conveyor belt for waste disposal Integrated electrical and control cabinet Total installed power: approx. 47 kW OPTIONAL: Wireless barcode scanner 2 WORKING UNITS (TOP) – (SERVO MOTOR for X-Y-Z axis): 4 V15 drilling heads (4 x 2.3 kW) each with 15 vertical spindles (total of 60 upper spindles) Lajdsx Aqi Espfx Abxoc 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR for X-Y-Z axis): 6 V32 drilling heads (6 x 2.3 kW) each with 32 vertical spindles (total of 192 lower spindles) 2 WORKING UNITS (HORIZONTAL): 2 H21 drilling heads (2 x 2.3 kW) with horizontal spindles 21 horizontal drilling spindles (right) + 21 horizontal drilling spindles (left)

Stanje: zelo dobro (rabljeno), Panel saw with rear lifting table infeed Control system: Power Concept Software: CADmatic 4 Professional Lifting table infeed (mm): 4300 x 2200 No. 2 rear pushers (TWIN PUSHER) model POWER CONCEPT With clamping grippers Infeed equipment for thin panels (min. thickness mm): 3 Max. cutting width (mm): 4300 Usable stroke of pusher (mm): 4300 Max. saw blade projection (mm): 95 (automatic) Scoring saw (max. blade diameter / power): 180 mm / 2.2 kW Main saw (max. blade diameter / power): 380 mm / 13.5 kW (max. 18 kW) Adjustable saw carriage feed (m/min): 1 - 150 Front air flotation tables (qty): 4 Total connected load (kW): 28 OPTION: - Cut Rite software (optimization) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Label printer (option) Lajdpfxeimr Ice Abxec - Software LABELING PACKBR 3/4/5 (labels)