Procesor HC020 SPS-II 16MHZ 128K

HOMAG

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, delovna širina: 2.400 mm, delovna višina: 32 mm, delovna dolžina: 800 mm, TEHNIČNI PODATKI Delovna širina X-os: 267 - 2.400 mm Delovna dolžina Y-os: 120 - 800 mm Delovna višina Z-os: 16 - 32 mm 2 zgornji vrtalni glavi + neodvisni Y-os utorni enoti, sestavljeni iz: Csdpfx Aoydn A Tefxsgn Leva glava z 15 navpičnimi vreteni v X- in Y-osi + eno rezilo za utorno rezkanje Desna glava z 15 navpičnimi vreteni v X- in Y-osi + enota za avtomatsko montažo tečajev 2 neodvisni spodnji navpični vrtalni glavi v Y-osi, vsaka s po 5 + 5 neodvisnih vreten PODATKI O STROJU Krmiljenje: Numerično z WoodWop programsko opremo OPREMA Avtomatski nakladalni sistem z motoriziranim valjčnim transporterjem Rezervoar z vibratorjem za shranjevanje tečajev in samodejno doziranje Odpremni sistem z avtomatskim valjčnim transporterjem

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0-201-09-5124, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.650 mm, model krmilnika: Homatic PC 85 Power Control, TECHNICAL DETAILS X-axis working area: 6,000 mm Y-axis working area: 1,650 mm (up to 1,750 mm for milling) Maximum travel height during edge banding: 60 mm Maximum applicable edge height: 65 mm Minimum internal radius: 30 mm Automatic tool changer: 18 positions Drilling head: 27 spindles (4 kW) Max. unit saw blade diameter: 200 mm MACHINE DETAILS Control system: Homatic PC 85 Power Control Software: WoodWop Electrospindle C vector: 11 kW, HSK F63 Edge requirements: Rolls, PVC / ABS 0.4 - 3 mm Codpoydl Nwsfx Afxogn EQUIPMENT - 10 adjustable support rails for suction cups - Loading and unloading aid with 8 pneumatic rods - Suction cup positioning with laser system - Edge banding unit with 360° rotation, glue pot and preheater for granulated EVA glue - Rubber-coated pressure roller + additional rubber-coated pressure roller - Preheating lamp - Edge cutter and edge scraper - Edge holder magazine - Front and side protection system with mats - Surround protection grid - Chip extraction with motorized conveyor belt - Air conditioning for machine control - Automatic lubrication system - Vacuum pump

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0-200-03-8334, hitrost pomika os X: 24 m/min, višina obdelovanca (maks.): 60 mm, model krmilnika: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Feed speed: 24 m/min MACHINE DETAILS Control system: Power Control PC 22 Supply voltage: 480 V Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Fuse: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Working height electronically adjustable via CNC Motorized rubberized pressure belt Panel support guide Side roller conveyor with free-running rollers for panel support Sanding unit Lamps for preheating panel edge 6-position coil holder magazine with automatic edge change via CNC Gluing unit for EVA hot-melt adhesive with premelter and glue pot Pressure station for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with 2 motors and automatic tilt adjustment Cgodpfeydiymox Afxsn Overlapping trimming/milling unit with 2 motors Adhesive/milling unit with 2 tiltable motors, electronically adjustable via CNC Multifunctional 4-motor corner rounding unit (scraper + rounding) with numerical control, automatic adjustment Space reserved for possible installation of an additional working unit Edge scraping unit Oscillating brush unit

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 29.000 h, Funkcionalnost: nepreverjeno, hitrost pomika os X: 25 m/min, skupna dolžina: 7.755 mm, višina obdelovanca (maks.): 40 mm, delovna višina: 950 mm, model krmilnika: PowerControl PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Maximum feed rate with FK11: 20 m/min Working height: 950 mm Minimum workpiece width (for workpiece thickness 12-22 mm): 60 mm (depending on workpiece length) Minimum workpiece width (for workpiece thickness 23-40 mm): 105 mm (depending on workpiece length) Workpiece projection: 30 mm Workpiece thickness: 12 - 40 mm Edge material (coil): 0.3 - 3 mm Maximum edge cross-section (PVC): 135 mm² Maximum edge cross-section (veneer): 100 mm² Maximum coil diameter: 830 mm Edge material (strips): 0.4 - 20 mm Maximum edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Pneumatic connection: 7 - 8 bar Total length: 7,755 mm Operating hours: approx. 29,000 h EQUIPMENT Cgsdpfx Aeyc S Haefxon Scissor-type workpiece support with roller support, extendable by 1000 mm Automatic infeed fence adjustment Fixed stop on the left side Pneumatically controlled infeed lock Upper pressure by powered combination V-belt Electric height adjustment Workpiece transport system via transport chain with rubber pads Release agent spray unit (top/bottom) Joint milling unit 2 x 3 kW Gluing unit A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick-change system, 2-roller magazine, pressure zone C (automatically adjustable, with 1 pre-press roller and 6 post-press rollers) End trimming unit HL84 0.8 kW, with automatic adjustment for bevel/straight as well as pneumatic adjustment for flush/overhanging trimming Pre-milling unit 1.5 kW, pneumatic adjustment for flush/overhanging milling Contour milling unit FK11 with automatic adjustment from bevel to radius milling Profile scraper PN10 (with pneumatic retraction for lateral offset) Finishing unit (with pneumatic retraction for lateral offset), consisting of glue joint scraper and buffing unit Remote control Workpiece guide for FK device Note: Container loading and seaworthy packaging by the seller is not possible.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, obratovalne ure: 33.000 h, Funkcionalnost: nepreverjeno, hitrost pomika os X: 25 m/min, višina obdelovanca (maks.): 60 mm, delovna višina: 950 mm, model krmilnika: Power Control PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Working height: 950 mm Minimum working width with workpiece thickness of 22 mm: 55 mm Minimum working width with workpiece thickness of 60 mm: 100 mm Workpiece overhang: 30 mm Workpiece thickness: 8 (12) - 60 mm Edging material, strips max.: 0.4 - 20 mm Edge cross-section, strips max.: 900 mm² Edging material, roll: 0.3 - 3 mm Maximum edge cross-section for PVC: 135 mm² Maximum edge cross-section for veneer: 100 mm² Maximum roll diameter: 830 mm MACHINE DETAILS Control: Power Control PC22 Pneumatic connection: 7 - 8 bar Operating hours: approx. 33,000 h EQUIPMENT Continuous machine base for mounting processing units Workpiece support with roller rail, extendable by approx. 800 mm Glue roller drive when feed is stopped Cgedpfx Aeyc Sr Aefxsn Glue pot lifting mechanism when feed is stopped Workpiece-actuated glue pot clamping Automatically adjustable infeed fence Pneumatically controlled infeed guard Feed unit with 2 rollers Infeed extension 500 mm Automatic pressure zone adjustment Sliding carriage Pre-installed Boomerang ZHR05 return system Workpiece support in extended scissor design Operating data acquisition Electric height adjustment Fixed stop side on the left Workpiece transport device Top pressure Separating agent spraying unit Jointing cutter unit, 2 x 3 kW Glue application unit A20 Basic for roll material up to 3 mm and strip material up to 20 mm, with melt unit, granulate container and quick-change system End trimming unit, 2 x 0.8 kW, with pneumatic adjustment Lubricant spraying unit Pre-milling unit 1.5 kW, pneumatically adjustable Contouring milling unit FK13, 2 x 0.4 kW Universal milling unit 4 kW, controlled, with infinitely variable axis Multi trimming unit MN21, automatic Finishing unit FA11, with trimming unit, cleaning agent application and buffing unit, pneumatically adjustable Noise protection Space for additional processing units Note: The machine is sold without working tools. Container loading and sea packaging are not possible by the seller.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Stroj za lepljenje robov, izdelan leta 2009. Ta HOMAG PROFI KAR310/11/A20/S2 je opremljen s povratnim sistemom za obdelovance BARBARIC. Razmislite o priložnosti za nakup tega stroja za lepljenje robov HOMAG PROFI KAR310/11/A20/S2. Za več podrobnosti nas kontaktirajte. Cgjdpfoyhqi Dex Afxsn • Stanje: rabljeno Dodatna oprema • BARBARIC povratni sistem za obdelovance

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, število osi: 3, Ta 3-osni CNC lesnoobdelovalni center HOMAG OPTIMAT BAZ 211 VENTURE 20 je bil izdelan leta 2006. Opremljen je s prenovljenim izmeničnim motorjem z zavoro za zadrževanje in zobatim jermenom za izboljšano zmogljivost. S približno 32.572 delovnimi urami predstavlja ta CNC lesnoobdelovalni center odlično priložnost za visokokakovostno obdelavo lesa. Izkoristite priložnost in kupite CNC lesnoobdelovalni center HOMAG OPTIMAT BAZ 211 VENTURE 20. Za dodatne podrobnosti nas kontaktirajte. • Delovne ure: cca 32.572 h • Stanje: Prenovljeno (tovarniško prenovljeno) • Zamenjani/popravljenih deli: • AC motor 8,00 Nm digitalni z zavoro za zadrževanje Csdpoyhqc Refx Afxegn • Zobati jermen HTD 800-8M-30 • Adapter OMLAT-Homag vreteno

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, regularly serviced (last maintenance by Homag in 11/2024) Equipment and technical data: - Minimum workpiece thickness: 12 mm - Maximum workpiece thickness: 60 mm - Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) - Edge thickness min: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max: 3 mm (coil material) / 20 mm (strip material) - Feed speed: infinitely variable, 18–25 m/min (frequency controlled) - Adhesive type: EVA hot-melt glue - Glue application (pot / cartridge / nozzle): melting unit with granulate container Cgodpewx Aaqofx Afxjn - Glue capacity / cartridge size: granulate container, melting performance 18–35 kg/h, level regulated - Heat-up time: approx. 8–10 min - Edge magazine (slots): 2 rolls (automatic roll change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: cross-cutting unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: profile milling unit FK13, automatic 8-position tool changer (R = 2 mm) - Chamfer / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in finishing unit FA11 - Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW - Workpiece preheating: available - Release agent spray unit: top / bottom, type 2929 (F.01) - Extraction ports: several Ø 100 mm (individual extraction for each unit) - Control system: powerControl PC22 (industrial PC, woodCommander on Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant according to EC Directive 98/37/EC Dimensions / Space required: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system shown in the pictures is not included in the scope of delivery! Availability: short-term Location: 63934 Röllbach

Stanje: rabljeno, številka stroja/vozila: 007516, Maximum working width: 2400 mm Cgsdpfx Aowuz D Tefxsn

Stanje: rabljeno, številka stroja/vozila: 008169, Delovno območje os X: 4500 mm Cgedpfxsxaud Ie Afxen Delovno območje os Y: 1550 mm Delovna površina: z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 12 kW Število krmiljenih osi: 4 osi Število vrtalnih vreten: 31 Število mest za orodja: 22