Dovetailer nakup rabljenega (162)

Stanje: rabljeno, Namizni model, maksimalna globina rezkanja: 70 mm, minimalna širina obdelovanca: 10 mm, minimalna višina obdelovanca: 8 mm, maksimalna višina obdelovanca: 110 mm. Mere: 560 x 620 x 770 mm. Teža: ca. 30 kg. Lokacija skladišča: Nattheim. Fpsdpfx Aey Hryvjpljg

Stanje: rabljeno, Paralelni delavniški primež LEINEN s lastovičjim vodilom in nastavitvijo višine Tip: 125 Širina čeljusti: 125 mm Višina čeljusti: 23 mm Objemni razpon: največ 200 mm Skupna višina: 550 do 750 mm - 360° vrtljiv - lastovičje vodilo - nakovalna površina za lažja ravnanja - približno 200 mm nastavitve višine brez dvižnega sistema Teža: 44,5 kg Dobro ohranjen Fodpfxey E T Dyj Apljpg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za lastovičji rep OMEC 750 za lastovičje spoje na predalih in različnih kosih pohištva Primeri obdelave. Fpsdpfx Aogzrlpsplog Rabljeni stroj Delovno stanje: dobro Stroj za lastovičji rep z orodji: DA Napetost: 380/50

Leto izdelave: 2021, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Prodajam stroje iz tehnološke linije za proizvodnjo konstrukcijskega lesa KVH. V sestavi proizvodne linije so med drugim: 1. Poševni izmetni transporter 2. Podajalna miza za vizualno klasifikacijo lesa 3. Buffer pred izrezovalcem napak 4. Avtomatski izrezovalec napak s kamero za fluorescenčno kredo 5. Buffer pred strojem za spoj z zobatim klini 6. Stroj za kliničaste spoje z nanosom lepila in žago za rezanje na želeno dolžino do 13 m 7. Verižni skladiščni transporter iz lepilnega stroja do skobeljnega stroja 8. Avtomatski podajalnik v štiristranski skobeljni stroj 9. Štiristranski skobeljni stroj Winter 6-33 Fpsdpsy Dd Nkefx Aplsg 10. Valjčni izhod iz štiristranskega skobeljnega stroja 11. Samodejni stroj za pakiranje skobljanega lesa 12. Verižni podajalnik 13. Merilnik trdnosti lepljenega lesa

Stanje: dober (rabljeno), Koda: 0106 Znamka: OMEC - ITALIJA Model: 650-M Rezilni stroj za lastovičje spoje Tehnične lastnosti: Vgrajena moč na stroju: 0,75 kW Maksimalna delovna širina: 420 mm Razdalja med sredinami utorov: 25-40-50-80 mm Skupne dimenzije: 800 x 720 x 1320 mm (V x Š x G) Fpedpfx Asyg N Hlopleg Teža: 130 kg

Stanje: rabljeno, Število vreten: 1 kos Moč motorja: 1 kW Število obratov: 33.000 vrt/min Fedpfx Apow Db H Tslopg Lastovičji rep rezkalni motor Hoffmann tip UAD 33-F.

Stanje: dober (rabljeno), Koda: 0125 Blagovna znamka: OMEC - ITALIJA Model: F8 - CE standard Avtomatski utorni stroj za izdelavo lastovičjih spojev na predalnikih in različnih pohištvenih elementih - v skladu s CE standardom Stroj je opremljen z enoto z 8 vreteni z enako profiliranimi rezkarji, ki omogočajo izdelavo utorov različnih višin. Tehnični podatki: Število vreten: 8 Vrtljaji vreten/min: 17.000 Največja delovna širina: 400 mm Fodpowl Iv Rofx Aplspg Razdalja med središči utorov: 25 mm Izdelava predalov: 120 kosov/uro Moč: 7,5 kW Delovni tlak: 6 atm Skupne mere: 1500 x 1000 x 1200 mm (v) Teža: 1.100 kg

Stanje: zelo dobro (rabljeno), Trapezna pnevmatska stiskalnica Steblo PTJ, Fsdox Ihurepfx Aplepg Stiskalnica je sestavljena iz dveh delov, Možna je tudi kupnja enega dela širine 3000 mm. Višina: 900 mm, Širina: 6000 mm, Maksimalna debelina: 110 mm, 8 pritisnih cilindra, 12 izravnalnih pritisnih elementov, Teža: 1560 kg, Stanje: zelo dobro, pripravljena za uporabo.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 2020 x 920 x 1160 mm Fedpov A Hywjfx Aplepg Weight: 680 kg Total power requirement: 3 kW CNC Dovetail Milling Machine ZF-700 - CNC control with user-friendly touchscreen operation - Max. working width: 700 mm - Min./max. workpiece thickness: 12 - 25 mm - Cutting time: 3 - 30 sec. - Milling spindle motor: 1.1 kW - Spindle speed: 18,000 rpm - X-axis servo motor: 0.75 kW - Y-axis servo motor: 0.75 kW - Total power: 3.0 kW - Voltage: 400 V, 50 Hz - 4 vertical pneumatic workpiece clamps - Lubrication pump - CE conformity - Operating pressure: 6 bar - Dimensions: L=2020, W=920, H=1160 mm - Weight: 680 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 2020 x 920 x 1160 mm Weight: 750 kg Total power requirement: 3.2 kW CNC Dovetail Milling Machine ZF-900 - CNC control system with user-friendly touchscreen operation - Maximum working width: 900 mm - Minimum/maximum workpiece thickness: 12 – 25 mm - Cutting time: 3 – 30 sec - Milling spindle motor: 1.1 kW - Spindle speed: 18,000 rpm - X-axis servomotor: 1.00 kW - Y-axis servomotor: 0.75 kW - Total power: 3.2 kW - Voltage: 400 V, 50 Hz - 4 vertical pneumatic workpiece clamps - Lubricant pump - CE conformity - Operating pressure: 6 bar - Dimensions: L=2020, W=920, H=1160 mm Fedpfxsv A Hy Dj Aplspg - Weight: 750 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1700 x 750 x 1250 mm Weight: 600 kg Total Power Requirement: 3 kW CNC Dovetail Milling Machine ZF-500 - CNC control with user-friendly touchscreen operation - Max. working width: 500 mm Fpodpfx Aev A Hyqsplog - Min./max. workpiece thickness: 12 - 25 mm - Milling spindle motor: 1.1 kW - Spindle speed: 18,000 rpm - X-axis servomotor: 0.75 kW - Y-axis servomotor: 0.75 kW - Total power: 3.0 kW - Voltage: 400 V, 50 Hz - 4 vertical pneumatic workpiece clamps - Lubricant pump - CE compliance - Operating pressure: 6 bar - Dimensions: L=1700, W=750, H=1250 mm - Weight: 600 kg

Stanje: rabljeno, Protinastavek in adapter za rezkalni stroj za horizontalno rezkanje Protinastavek in adapter (kontradržalo) za rezkalni stroj DECKEL (Nosilni blok z lastovičjim vpenjalnim adapterjem DECEL FP1 + FP2) Tip 9570 Širina ozkega lastovičjega repa: ca. 72 mm Širina širokega lastovičjega repa: ca. 88 mm Višina lastovičjega repa: ca. 15 mm Dolžina (nosilni blok): 133 mm Širina (nosilni blok): 50 mm Skupna višina (nosilni blok): 105 mm Ležajna izvrtina: Ø 17 mm (z bronasto ležajno pušo) Razdalja osi izvrtine do nosilne površine lastovičjega repa: ca. 82,5 mm (višina konice) Fodpfx Apsxcbl Djlspg - Adapter, primeren za lastovičji rep in vpenjalno površino, povečanje za 22,5 mm na višino konice 105 mm Skupna dolžina (lastovičja letev): 635 mm Teža: 3,8 kg zelo dobro stanje

Stanje: dober (rabljeno), Clamping plate with T-slots, plate field, welding table, platen drilling machine, T-slot plate. - Clamping plate: with dovetail guide - Clamping surface: 1955 x 1040 mm - Height: 110 mm - Dovetail: 27/45 mm / 35 mm high - Pinning opening: 47 x 47 mm Fpjdpfxstp Rfhe Apleg - Quantity: 2 clamping plates available - Price: per piece - Transport dimensions: 1955 x 1040 x H110 mm - Weight: 1288 kg

Stanje: novo, The manual milling machine Omec 650-M is suitable for the production of dovetails on drawers and all types of furniture parts. The machine is equipped with a spindle unit with a milling cutter, allowing the machining of dovetails with different heights. The machine can produce four types of dovetail joints with various pitches. Clamping and releasing of workpieces is carried out manually via eccentric shafts. Operation (On/Off) is performed via an overload relay on the motor terminal board and handwheels with levers mounted on the sides of the machine. The machine is built in accordance with CE standards. Technical data: Connection power: 0.75 kW, 400 V, 50 Hz Number of spindles: 1 Spindle speed: 16,500 rpm Standard dovetail pitch spacing: 25 / 40 / 50 / 60 mm Machine weight: 100 kg Space requirement (L x W x H): 450 x 540 x 1420 mm Workpiece dimensions: Workpiece length: 200 – 1500 mm Workpiece width: 60 – 280 mm Dovetail height: 5 – 18 mm Workpiece thickness: 7 – 45 mm The machine comes as standard with the following parts: - Eccentric HSS milling cutter mounted on the machine - Set of tools for machine adjustment and maintenance - Operating manual. Fpodpfodcdwbex Apleg

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: K2, največja širina rezanja: 650 mm, vrsta vhodnega toka: trifazni, Oprema: varnostna svetlobna zapora, Stroj je sestavljen iz: - 5-osna rezkalna enota - Žagin set z žaginim listom premera 700 mm - Vodoravni vrtalnik za vrtanje tramov - Avtomatski sistem za označevanje montažnih referenc - Sistem za odvajanje rezil žaginega lista - Avtomatski sistem za nalaganje - Avtomatski sistem za razkladanje - Avtomatski sistem za obračanje tramov - Največje obdelovalne dimenzije 640*260*16000 mm Orodja vključena v stroju: - Univerzalni rezkar 350x100 - Diskasti rezkar 350x40 - Čelni rezkar dim. 50x200 - Čelni rezkar dim. 30x230 - Set svedrov za vrtalno enoto - Lastovičji rep za spoje tramov Fodpfxey Ruhdj Aplspg Na stroju je bil nedavno zamenjan računalnik, standardno vzdrževanje je bilo vedno opravljeno z originalnimi nadomestnimi deli.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Available at short notice – YOUR OPPORTUNITY! We are offering our well-maintained and fully operational chalet machining center from the renowned Swiss manufacturer KRÜSI for sale. As we are switching to a different model, you now have the chance to acquire this flawless machine. It is still in use, so functionality tests and trial runs are possible at any time. Collection and dismantling by the buyer Assembly recommended in consultation with Krüsi Year of manufacture: 2018, in operation since 2019 Total length with tables: approx. 35.5 m Available from 08/2026 Machine details: - 4 milling units (each 4 kW), spindle drives via timing belts - Max. working area: 250 mm building height, 245 mm wall thickness - Equipped with 6 frequency converters for soft start and motor braking - Automatic work cycle and pneumatic workpiece clamping - Siko position indicators on adjustment spindles (horizontal) - Pneumatic under-table crosscut saw left, 5.5 kW with frequency converter - Manually operated drilling unit, 1.8 kW, mounted on right column - Hydropneumatic feed for drilling unit - Additional vertical pneumatic clamping cylinder with holder - Additional horizontal pneumatic clamping cylinder with holder - Extension table for milling unit with additional vertical clamping cylinder - 0.5 m stop rail, mounted front left of machine column - 0.5 m stop rail, mounted front right of machine column - Additional table for short workpieces - Steel chip funnel for pit extraction - Dovetail and face slot milling unit (with pneumatic rotary axis) Milling and drilling tools: For horizontal milling units: - WPL rebate cutter Ø 180 mm, adjustable 61–240 mm x 40 mm, Z=2 For vertical milling units: - WPL rebate cutter Ø 230 mm, adjustable 61–240 mm x 40 mm, Z=2 - WPL rebate cutter Ø 270 mm, adjustable 61–240 mm x 40 mm, Z=2 For drilling unit: - Drill bit Ø 20 mm, with long centering tip - Drill bit Ø 30 mm, with long centering tip For 90° swiveling dovetail and face slot milling unit: Fjdpfxey Ri Hue Apljpg - WS rebate cutter Ø 230 mm, bottom Ø 40 mm, width 40 mm - WS dovetail cutter 20°, 92 x 36.5 x IG M 24 left, Z3, V3, F3 with chip breaker flutes, MK 863-1 - WS dovetail cutter 20°, 92 x 36.5 x Ø 30 mm, Z3, V3, F3 with chip breaker flutes, MK 863-2 - Spanner for above dovetail cutters Accessories: Horizontal (top): - WS groove and tenon cutter, aluminium, Ø 270 mm, bore Ø 40 mm, adjustable 21–40 mm - Central section aluminium Ø 270 mm, width 30 mm, bore Ø 40 mm, Z2 - Central section aluminium Ø 270 mm, width 50 mm, bore Ø 40 mm, Z2 Horizontal (bottom): - WS adjustable rebate cutter, aluminium, Ø 180 mm, bore Ø 40 mm, adjustable 26–50 mm, 2 x Z3 F3 - Central section aluminium Ø 180 mm, width 40 mm, bore Ø 40 mm, Z2 Vertical (front): - WS groove and tenon cutter, aluminium, Ø 270 mm, bore Ø 40 mm, adjustable 21–40 mm - Central section aluminium Ø 270 mm, width 40 mm, bore Ø 40 mm, Z2 Vertical (rear): - WS adjustable rebate cutter, aluminium, Ø 180 mm, bore Ø 40 mm, adjustable 26–50 mm, 2 x Z3 F3 - Central section aluminium Ø 180 mm, width 30 mm, bore Ø 40 mm, Z2 Safety cover for horizontal top with holder (for cutter Ø 270 mm) Safety cover for vertical rear with holder (for cutter Ø 180 mm)

Stanje: novo, Leto izdelave: 2021, Optimill MB 4PV Drilling and Milling Machine including Accessories (New, Unused Condition): Including Accessories: - Set of 20 Packing Plates - RTE 165 Dividing Table - SPW 12 Clamping Tool Kit (58 pieces) - 4x SE55 Leveling Feet with Vibration Dampers - Collet Chuck Set MK4/M16 ER32 3-20 mm Heavy, solid cast-iron construction High smoothness of operation due to ground, oil-bath lubricated gearbox gears Clockwise/anticlockwise rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed for the X-axis Coolant system Machine lamp Gear head swivels ±45° Substantial dovetail guide on the column, hand-scraped, for maximum stability and highest precision Height-adjustable, large protective shield with microswitch Drilling depth stop Digital position display DRO 5 Drilling/thread cutting function Substantial and large cross table, precisely surface-machined with T-slots and adjustable gib strips Heavy cast-iron machine stand with chip tray Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 rpm via 2 infinitely variable speeds SINAMICS V20 inverter by SIEMENS Fjdsyxyivjpfx Aplspg Dimensions and Weights: Length approx. 1600 mm Width/Depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling-Milling Head: Drilling-milling head tilt range ± 45 ° Drilling-Milling Capacity: Max. face mill size: 63 mm Max. shank cutter size: 26 mm Drilling capacity (steel, S235JR): 24 mm Continuous drilling capacity (steel, S235JR): 20 mm Electrical Data: Drive motor output: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Horizontal milling table: Length: 800 mm Width: 240 mm Vertical spindle - milling table max. distance: 420 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 80 mm Coolant system: Coolant pump drive power: 100 W Standards and Approvals: Standard: DIN EN 55011 EMC class: C2 Travel: X-axis, manual: 560 mm Y-axis, manual: 195 mm Z-axis, manual: 350 mm X-axis, automatic: 480 mm Vertical spindle: Throat: 258 mm Spindle taper: MK 4 Speed range: 60 – 2,760 rpm Number of speed ranges: 2 Speed control: electronic Drawbar: M 16 Quill diameter: 75 mm Quill stroke: 120 mm

Stanje: dober (rabljeno), Protiprizma, ležajno ohišje, nosilec ležaja, stojno ležišče, ležaj za rezkalni stroj - Lastovičji rep: pribl. 200 x 168 mm - Luknja: Ø 56 mm Fjdpfx Asfibh Aeplopg - Količina: 1x ležajno ohišje na voljo - Cena: na kos - Dimenzije: 260/160/V150 mm - Teža: 10,7 kg/kos

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 10 t, hod: 115 mm, širina mize: 470 mm, dolžina mize: 360 mm, globina grla: 190 mm, tabela razdalj do bata: 210 mm, skupna dolžina: 1.470 mm, skupna širina: 1.400 mm, skupna višina: 1.800 mm, skupna masa: 430 kg, Manuelle spindelpress C-stativ Fpsdpfxjyzy R Es Apljg

Stanje: dober (rabljeno), Glavno vreteno z pogonskim motorjem, univerzalna rezkalna glava, držalo za rezkanje, podaljšek za rezkanje, kotna rezkalna glava, zgornji suport, zgornji drsnik, lastovičji rep vodilo, nosilec orodja, križna miza - Proizvajalec: Mikron, zgornji suport in nosilec orodja iz CNC rezkalnega stroja Mikron VC500D - Motor: INNDRAMAT 165V 5,5 kW, glej sliko identifikacijske tablice tip 100C-B050B1-AS03 - Hitrost vrtenja: 1500/8000 o/min - Glava vretena: vpenjanje SK40 Fjdey H Ivmspfx Aplopg - Dimenzije: 910/1120/V510 mm - Teža: 365 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, PROMAT šesterokotna delovna miza Mere: 2340 x 2700 x 850 mm Masiven buk RAL 7035 svetlo siva RAL 5010 encijan modra Nosilec za risbe – nastavek – držalo Spodnji kontejnerji – predalčne omare pod skupinsko delovno mizo so zaklepne, ena ključavnica je pokvarjena Pokrovne letve med podnožnimi omarami šesterokotne mize Na večnamenski delovni mizi so nameščeni primeži. LEINEN-Junior paralelni primež z ročnim pogonom Širina čeljusti: 125 mm, mehansko-hidravlična napetost Fjdjx Aqr Hjpfx Aplepg Robusten Junior primež iz visoko trdne sive litine Najvišja natančnost vpenjanja strojelega primeža zaradi dolge in natančne lastovičje vodilne tirnice Kaljene jeklene čeljusti, integrirane cevne čeljusti Cena € 3.150,-- neto iz skladišča, dodatno stroški pakiranja Za vse tehnične podatke so dovoljene napake/tiskarske napake. Prodaja izključno v države EU.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2025/002, Finger jointing system, finger jointing systems Finger jointing line, finger jointing machine MACH I -L- simply the best Wood remains stationary, the tools move Availability is extremely high > Excellent finger profile milling quality and optimized cutting speed > Long service life of milling tools / mini finger cutters > System noise is relatively low or, compared to individual milling machines by Weinig-GRECON, the MACH I is exceptionally quiet The MACH I is the only package system worldwide Fedpfx Ajcbyp Nepljpg that can also process individual boards or beams. Finger jointing system for vertical and horizontal milling, finger joint profiles – together with newly developed clamping stations and the transfer channel on the milling carriage, the MINDA - MACH I offers the following groundbreaking advantages: high cycle rate combined with a 1200 mm milling channel at 40 mm wood thickness, throughput approx. 150 linear meters/min; very reliable material transport – no failure-prone conveyor rollers, no V-belts, flaps, or cross conveyors – extremely high availability; suitable for all cross-sections including square timber; thanks to fully automatic and continuous channel adjustment, milling of single pieces is possible in extreme cases, making the system exceptionally flexible. Performance with KVH 160 x 280 mm is 38 lm/min, with KVH 100 x 300 mm is 64 lm/min, and with BSH 45 x 250 mm is 110 lm/min. MACH I -L- simply the best state-of-the-art technology made very simple

Stanje: novo, Catalogue no.: H0531 Fjdpfsymnlgsx Aplspg – New machine, in stock – Tilting spindle – With sliding side carriage – CE certificate – Operating and maintenance manual (DTR) in Polish TECHNICAL DATA Spindle diameter: 30 mm Spindle stroke: 100 mm Max. spindle diameter: 180 mm Spindle tilt adjustment: -5 to +45 degrees Table dimensions: 1000 x 360 mm Sliding table: 1000 x 250 mm 4 speed options: 1800, 3000, 6000, 9000 rpm Motor power: 2.8 kW / 3.9 kW Extraction port diameter: 100 mm Dimensions (L/W/H): 1150 / 1155 / 730 mm Weight: 270 kg PRODUCT FEATURES The FS 200SF bench-mounted spindle moulder has a robust frame with a grey cast iron table top and a high-quality fence, providing secure material clamping and precise adjustment. The price includes the spindle moulder with sliding side carriage. The FS 200SF with tilting spindle offers a wide 4-speed range: 1800/3000/6000/9000 rpm. It is suitable for machining straight-edged workpieces and for creating decorative strips, grooves, tongue and groove joints, tenons, and dovetails. The welded steel body combined with the large cast iron table ensures the machine is very stable and solid, resistant to vibration. Precision sliding table included. Net price: 14,100 PLN Net price: 3,350 EUR Net price calculated at 4.2 PLN/EUR (price may be subject to change in case of significant currency fluctuations)

Stanje: novo, Leto izdelave: 2026, The Rezarko ZX7045 B1L drilling and milling machine is a versatile drill-mill designed for precise metalworking in both workshop and production environments. This machine combines drilling and milling functions, ensuring operational stability thanks to its robust cast iron construction and a wide range of spindle speeds. It’s the ideal solution for facilities that demand repeatability, rigidity, and real productivity. Key advantages: - Heavy-duty, stable cast iron body – minimizes vibrations during milling and drilling. - Automatic spindle feed (125 mm) – increases efficiency in series operations. - Height adjustment on the support, not the column – ensures greater setting precision. - 12 spindle speed ranges up to 3200 rpm – allows matching to material type and tooling. - Integrated coolant system – provides stable cutting conditions and extends tool life. - Dovetail guides – ensure high rigidity and precise movements. - ±90° rotating head – enables angular machining. - Quiet operation due to ground gears; reversible (left/right) spindle rotation available. Construction and technology: The ZX7045 B1L drill-mill is designed as a compact yet fully industrial metal milling machine. The massive cast iron base and housing provide high rigidity. The cross table measures 1000 x 240 mm and features a precisely ground work surface, allowing accurate clamping of workpieces. Fjdpfx Apsy E Hk Hjlopg The MT4 standard spindle allows for a wide range of tooling – such as end mills, face milling cutters, and taper shank drills. The 1.8 kW (2.5 HP) motor, powered by 400 V, ensures stable operation, even with larger milling diameters. Precision and working efficiency: Thanks to X/Y/Z travels of 560/190/430 mm, the machine covers a broad scope of operations: drilling up to 32 mm in steel and 45 mm in cast iron, face milling up to 80 mm, and end milling up to 28 mm. The variable quill feed rates (0.12; 0.18; 0.25 mm/rev) allow precise adjustment to the work material and required finish quality. Standard equipment: - MT4/B18 drill chuck arbor - 3-16 mm/B18 drill chuck - MT4/MT3 reducing sleeve - MT3/MT2 reducing sleeve - Hand tools - Operating manual in Polish Optional accessories: - Machine stand - Automatic X-axis feed - Swivel, tilting, and precision vices - Rotary tables and indexing heads - Tapping and milling heads - Tool holders, driving arbors Technical specifications: - Drilling capacity in steel: 32 mm - Drilling capacity in cast iron: 45 mm - Face mill diameter: 80 mm - End mill diameter: 28 mm - Spindle speeds: 95, 170, 190, 280, 340, 540, 570, 960, 1100, 1600, 1950, 3200 rpm (12 steps) - Spindle taper: MT4 - Spindle travel: 125 mm (automatic feed) - Table dimensions: 1000 x 240 mm - Base dimensions: 440 x 600 mm - Max. distance spindle to table: 445 mm - Spindle to column surface distance: 262.5 mm - Travel X/Y/Z: 560/190/430 mm - Quill feed speeds: 0.12, 0.18, 0.25 mm/rev - Head swivel range (left/right): 90° - Motor power: 1.8 kW (2.5 HP) - Power supply: 400 V - Weight: 375 kg

Stanje: novo, Leto izdelave: 2026, Our ZX7045 B1 milling and drilling machine is designed for drilling, tapping, reaming, boring, and enlarging holes up to 45/40 mm in cast iron, as well as tapping up to M12 mm. The ZX7045 B1 version comes standard with automatic spindle feed and an efficient cooling system, providing not only excellent performance but also optimal working conditions. With a milling capacity of up to 80 mm width, slotting up to 22 mm, and the ability for face cutting and milling, this milling and drilling machine becomes an indispensable tool for a variety of applications. Product Features HEAVY, STABLE CAST IRON CONSTRUCTION AUTOMATIC SPINDLE FEED MILLING HEIGHT ADJUSTED ON THE SUPPORT, NOT THE COLUMN ADDITIONAL LIQUID COOLING SOLID CROSS TABLE WITH PRECISELY GROUND SURFACE DOVETAIL GUIDEWAYS QUIET OPERATION THANKS TO GROUND GEARS Fpsdpfx Apsvxth Helsg LEFT AND RIGHT ROTATION SWIVEL HEAD +/- 90° ADJUSTABLE HEAD HEIGHT Machine base available as an optional extra TECHNICAL DATA: DRILLING CAPACITY IN STEEL: 32 mm DRILLING CAPACITY IN CAST: 45 mm FACE MILLING CUTTER DIAMETER: 80 mm END MILL DIAMETER: 28 mm SPINDLE SPEEDS: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) SPINDLE TAPER: MT 4 SPINDLE TRAVEL: 125 mm (AUTOMATIC FEED) TABLE DIMENSIONS: 820 mm x 240 mm BASE DIMENSIONS: 580 x 600 mm MAX. DISTANCE SPINDLE TO TABLE: 445 mm DISTANCE SPINDLE TO COLUMN: 260 mm X/Y/Z AXIS TRAVEL: 515/175/430 mm QUILL FEED RATE: 0.12; 0.18; 0.25 mm/rev HEAD SWIVEL RANGE LEFT/RIGHT: 90° MOTOR POWER: 1.8 kW / 2.5 HP VOLTAGE: 400 V WEIGHT: 350 kg