Stroj za obdelavo lesa

Krüsi CMI 4 x 4 KW

Short-term availability – DON’T MISS OUT!

We are offering our well-maintained and fully operational chalet machine from Swiss manufacturer KRÜSI for sale.

Since we are switching to a different model, you now have the opportunity to acquire this flawless machine. We are still currently using it, so on-site inspections and test runs are welcome at any time.

Pickup and disassembly by buyer
Assembly in coordination with Krüsi recommended
Year of construction: 2018, in use since 2019
Total length with tables approx. 35.5 m
Available from 08/2026

Machine specifications:

- 4 milling units, each 4 kW, spindle drives via toothed belt
- Maximum working range: 250 mm building height and 245 mm wall thickness
- Equipped with 6 frequency converters for soft start and motor braking
- Automatic work cycles and pneumatic workpiece clamping
- Siko digital position indicators on adjustment spindles for horizontal movement
- Pneumatic under-table crosscut saw on the left, 5.5 kW with frequency converter
- Manually operated drilling unit, 1.8 kW, mounted on the right pillar
- Hydropneumatic feed for drilling unit
- Additional vertical pneumatic clamping cylinder with bracket
- Additional horizontal pneumatic clamping cylinder with bracket
- Extension table for milling unit with vertical pneumatic clamping cylinder
- 0.5 m stop rail mounted front left on machine stand
- 0.5 m stop rail mounted front right on machine stand
- Additional table for short workpieces
- Steel chip funnel for pit extraction
- Dovetail and end-mortising cutter (with pneumatic rotary axis)

Milling and drilling tools:
For horizontal milling units:
- WPL rebate cutter Ø 180 mm, adjustable range 61–240 mm x 40 mm, Z=2

For vertical milling units:
- WPL rebate cutter Ø 230 mm, adjustable range 61–240 mm x 40 mm, Z=2
- WPL rebate cutter Ø 270 mm, adjustable range 61–240 mm x 40 mm, Z=2

For drilling unit:
- Drill bit Ø 20 mm with long centering tip
- Drill bit Ø 30 mm with long centering tip

For 90° swiveling dovetail and end-mortising cutters:
- WS rebate cutter Ø 230 mm, bottom Ø 40 mm, width 40 mm
- WS dovetail cutter 20°, 92 x 36.5 x internal thread M24 LH, Z3, V3, F3 with chip breaker slots, MK 863-1
- WS dovetail cutter 20°, 92 x 36.5 x Ø 30 mm, Z3, V3, F3 with chip breaker slots, MK 863-2
- Clamping key for above dovetail cutters

Accessories:

Horizontal top:
- WS groove and tenon cutter, Aluminum, Ø 270 mm, bore Ø 40 mm, adjustable range 21–40 mm
- Center section, Aluminum, Ø 270 mm, width 30 mm, bore Ø 40 mm, Z=2
- Center section, Aluminum, Ø 270 mm, width 50 mm, bore Ø 40 mm, Z=2
Fgodjy Ri Huopfx Apljb

Horizontal bottom:
- WS adjustable rebate cutter, Aluminum, Ø 180 mm, bore Ø 40 mm, adjustable range 26–50 mm, 2 x Z3 F3
- Center section, Aluminum, Ø 180 mm, width 40 mm, bore Ø 40 mm, Z=2

Vertical front:
- WS groove and tenon cutter, Aluminum, Ø 270 mm, bore Ø 40 mm, adjustable range 21–40 mm
- Center section, Aluminum, Ø 270 mm, width 40 mm, bore Ø 40 mm, Z=2

Vertical rear:
- WS adjustable rebate cutter, Aluminum, Ø 180 mm, bore Ø 40 mm, adjustable range 26–50 mm, 2 x Z3 F3
- Center section, Aluminum, Ø 180 mm, width 30 mm, bore Ø 40 mm, Z=2

Protective cover for top horizontal with holder (for cutter Ø 270 mm)
Protective cover for rear vertical with holder (for cutter Ø 180 mm)

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.