CPE BAB40

HOMAG

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, moč: 19 kW (25,83 KM), potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.730 mm, število vreten: 20, Število orodnih postaj v orodni glavi 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverse beams: 8 Number of tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW CNC controller model: PC85 EQUIPMENT Njdpfoyttf Sex Afgecp CE marking Front safety cover Note: Cones, cutters, and aggregates are not included in the scope of delivery. Safety fences are supplied as available (left side only). The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6906

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.550 mm, višina obdelovanca (maks.): 40 mm, število vreten: 30, največja hitrost vožnje: 80.000 mm/min, TECHNICAL DETAILS Travel Range X-axis: 4,175 mm Travel Range Y-axis: 1,550 mm Traverse Speed X-axis: 80 m/min Traverse Speed Y-axis: 80 m/min Traverse Speed Z-axis: 30 m/min Max. Workpiece Height: 40 mm Number of Suction Traverse Bars: 8 Spindles Number of Spindles for Vertical Drilling: 20 Nodpfx Aoyttcwsfgecp Number of Spindles for Horizontal Drilling in X-direction: 10 Total Number of Spindles: 30 Milling Unit Number of Controlled Axes: 4 + Flex5 Motor Power: 15 kW Automatic Tool Changer Liquid-cooled Saw Unit Tool Magazine 1 Number of Positions: 18 Tool Magazine 2 Number of Positions: 10 EQUIPMENT NC Positioning Suction Units Vacuum Pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, največja debelina roba: 3 mm, hitrost pomika os X: 25 m/min, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Trimming Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW Ncedpfjytr Hbsx Afgop FEATURES Spraying unit Software for machine programming: PowerControl PC22 CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, model krmilnika: POWER CONTROL PC22, največja hitrost vrtenja: 12.000 obr/min, Auction extended by one week due to updated technical data! TECHNICAL DETAILS Workpiece Dimensions Panel height: min. 12 mm Panel height: max. 60 mm Edge thickness: min. 0.4 mm Edge thickness: max. 20 mm Milling and Gluing Unit Pre-milling unit: available Motor power: 3 kW Speed: 9,000 rpm Adhesive container for EVA hot-melt glue Ncodeyqx U Hspfx Afgjp Premelter for EVA hot-melt glue Edge Processing Unit 1 End trimming: available Number of motors: 2 Motor power: 0.80 kW Speed: 12,000 rpm Edge Processing Unit 2 Top and bottom rough flush trimming: available Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge Processing Unit 3 Corner rounding: available Number of motors: 2 Motor power: 0.4 kW Speed: 12,000 rpm Edge Processing Unit 4 Milling unit for roughing: available Motor power: 4 kW Speed: 9,000 rpm Edge Processing Unit 5 Edge scraper Edge Processing Unit 6 Glue scraper Edge Processing Unit 7 Polishing unit: available Number of motors: 2 Motor power: 0.18 kW Edge Processing Unit 8 Belt sanding unit: available Motor power: 1.5 kW Control software: POWER CONTROL PC22 Total connected load: 42 kW

Stanje: rabljeno, številka stroja/vozila: 008244, Tip pritrjenega roba: tanek rob, debel rob Sistem lepljenja: EVA, laser Spojno rezkanje: da Multifunkcijska enota: da Maks. podajna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Ncjdpfx Ajx Swgfefgop Delovni agregati: 8 kos

Stanje: dober (rabljeno), Dvojen profilirni stroj, stroj za obdelavo robov, motor za rezanje, motor za odrezovanje, vretenasti motor, motor za rezkanje Nsdpfx Afob A Nx Djgecp - Moč: 0,23 kW - Hitrost vrtenja: 18.000 min⁻¹ pri 300 Hz - Dimenzije: 210/70/V100 mm - Teža: 2 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Working height: 900 mm Working width: 1,350 mm Abrasive belt exchange side: left Workpiece thickness: 3 – 160 mm Frequency-controlled feed speed: 4 – 20 m/min Abrasive belt dimensions: 2,620 x 1,350 – 1,380 mm Adjustable abrasive belt blow-off device, 5-stage adjustable WRD WORKPIECE CLEANING ROTOR Workpiece cleaning unit with 16 rotating nozzles MOBILE CONTROL TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM After activating the program, the machine automatically adjusts to 10 mm workpiece thickness and the blow-off rotors are activated. After complete cleaning of the feed belt, the machine returns to the initial setting. AAT EXTRACTION SLIDE VALVE CONTROL Control of extraction slide valves via the terminal (24 Volt DC, slide valves not included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PC Emergency power supply for the abrasive belt oscillation in case of power failure Configuration consists of: SANDTEQ W-700, PROFI SWB735/RRE – bottom sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces. The machine is prepared to accommodate up to two auxiliary units, such as cleaning brushes, finishing or structuring brushes, and rotating cleaning nozzles. Units: I. R-UNIT Sanding unit with automatically adjustable contact roller, profiled steel roller, 240 mm diameter, with grit compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt change and increased process reliability - Abrasive belt drives with electronic, wear-free brake - Optical, contactless abrasive belt control - Pneumatic abrasive belt tensioning with integrated abrasive belt edge compensation II. R-UNIT Sanding unit with automatically adjustable contact roller, rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grit compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E-UNIT Sanding unit prepared for a pressure beam - Automatic locking of the sanding units for fast belt change and increased process reliability - Abrasive belt drives with electronic, wear-free brake - Optical, contactless abrasive belt control - Pneumatic abrasive belt tensioning with integrated abrasive belt edge compensation - Protected storage on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby mode to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing workpiece edge - Various sanding inserts, 80 mm wide with different felt hardness grades Machine dimensions L x W x H: 3,900 x 2,100 x 2,000 mm Machine weight approx. 7,500 kg Ncedsyw Ndmjpfx Afgsp SANDTEQ B-700, PROFI SWT735/RRE – top sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces Units as above, with the addition of: FBM FINISHING BRUSH Brush unit with finishing brush Brush material: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions L x W x H: 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight approx. 6,500 kg

Stanje: zelo dobro (rabljeno), FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGE BANDING LINE (Right) Consisting of the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "BARGSTEDT" Model PROFI TBR100/20/30/F M.02) SINGLE-SIDED EDGE BANDER (RIGHT) "HOMAG" Model Profi KAR350/12/A Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Control / Software: PC 22 Feed speed (variable) m/min 18 - 32 Panel infeed system WZ 14/30 Joint trimming unit with CNC control (2 x 3 kW) DOUBLE gluing unit (PUR adhesive + pre-melter) 2 x PU 34 Pressure zone (CNC-controlled) - Edge magazine for coil material (No. 12 positions) End trimming unit WK13 (CHAMFER / STRAIGHT Automatic adjustment) Pre-milling unit (2 x 0.55 kW) Pneumatic adjustment Multi-profile milling unit (CNC-controlled) MF 21 (2 x 0.55 kW) Copying milling unit (profile copying) FF 32 (4 x 0.4 kW) Automatic changeover device Contour milling unit (fine milling) CNC-controlled FK 31 (30 m/min), recently added after technological overhaul Multi-profile scraper unit (CNC-controlled) MN 21 (servo) Nedpfx Afsinigmegjcp Finishing unit (flat scrapers + smoothing unit) FA 11 Universal milling unit for grooving/rebating and profiling UF 11 (1 x 4 kW) M.03) FEEDING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Workpiece & Performance Panel Formats: • Length: 1,200–1,400 mm • Width: 195 mm • Thickness: 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack formation: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Loader Vacuum gantry for raw panel feeding (fixed edge right) • Workpiece weight up to 100 kg • Output up to 5 cycles/min • Pallet return + light barrier safety 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Empty pallet supply for loading • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Decor Alignment Station Aligns panels for decor-correct subsequent processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal division with edge trimming • Feed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT HPp11 Crosscut Station Crosscut in through-feed with pressure beam • Cutting width 2,200 mm • Pneumatic top pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Stack turner (2×8 compartments) for dissolving bundles • Conveyor speed 10–50 m/min 8. BARGSTEDT Angle Transfer (TW) 90° deflection with belt conveyors, feed up to 130 m/min For transfer into the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format machining • 6 units per side • 6.6 kW per unit • Tool Ø up to 200 mm • Joint edge color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Booth Enclosure for both HOMAG profiling machines • approx. 12,000 × 7,000 × 3,000 mm Post-Processing 12. BARGSTEDT TTK44/21/14/02 Flip Over Unit Workpiece turning in through-feed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Packing Station Automatic pack assembly with 1st/2nd grade sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Output 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Cartoning Station Folding and supply of cartons before packaging • Output up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic package marking (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrink Wrapping System Fully automatic film packaging with shrink tunnel • Connected load 36–40 kW Ncedoywxrajpfx Afgep • Output up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT TFB20/017/04 Belt Conveyor with Air Shower Cooling section after shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Cross Stacking Unit Automatic stacking onto pallets • Packages up to 1,400 × 195 × 58 mm • Output max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer palletizing with vacuum cups • up to 6 cycles/min • package weights up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic empty pallet supply for final palletizing

Stanje: rabljeno, številka stroja/vozila: 008395, Delovno območje os X: 3050 mm Delovno območje os Y: 1250 mm Moč glavnega vretena: 10 kW Njdpfx Afoygtcqjgjcp Število krmiljenih osi: 3 osi Število vrtalnih vreten: 27 Število orodnih mest: 8