Homag Espana nakup rabljenega (473)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (Half Line) max. working width 2500 mm, with automatic high-speed handling system: Njdjrnrrbspfx Agwjwn A) DOUBLE-SIDED LOADING STATION (with 2 loading positions) BARGSTEDT TBH 270/D/25/12 B) TRANSFER TURNER (longitudinal/transverse), "HOMAG" TDL /310 /25 /12 C) Double-sided sizing and edge banding machine HOMAG Model KFL526/9/A3/25 D) TRANSFER TURNER (transverse/longitudinal), "HOMAG" TDL 510/25/12 E) DOUBLE-SIDED UNLOADING STATION (with 2 unloading positions) BARGSTEDT TSH 270/D/25/12 With LINE CONTROL - WOODLINE CONTROL PC52

Stanje: rabljeno, Dvostranska linija za proizvodnjo kuhinjskega pohištva z lepilnim agregatom za PUR-lepilo Sestavlja jo: Enostranska podajalna postaja Bargstedt TBH20/ER/25/08/S Obratna postaja Bargstedt iz vzdolžne na prečno smer TDK10/25/10 Dvostranski formatirni in robni lepilni stroj Homag Optimat KF26/9/A3/25 Nwjdpfx Agew Tq N Ujwon Obratna postaja Bargstedt iz prečne na vzdolžno smer TDK20/25/10 Enostranska zložna postaja Bargstedt TSH20/ER/25/08/S (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do predhodne prodaje)

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood code: RU0007165 - Manufacturer code: 2-083-01-5410 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Nedev Efvispfx Agwewn

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING AND FORMATTING MACHINE (LEFT) “SOFTFORMING” Edge material (rolls) thickness (min/max) mm 0.4 / 3 Panel thickness (min/max) mm 8 / 60 Control/software: PC 22 / WoodCommander Feed speed (adjustable) m/min 10 - 40 Side adjustment of aggregate carrier, manual mm 30 - 80 FORMATTING SECTION: Spray unit (for liquid non-stick agent) Double milling unit KD 10 (2 x 6.6 kW) Milling unit for softforming (2 x 1.85 kW) 0°-20° Sanding belt unit for straight edge KS 10 (mm 120 x 2100) Clearance (mm 700) EDGE BANDING SECTION: Gluing unit (hot melt adhesive + pre-melter) E34 softforming Pressure roller conveyor G (revolver with 4 positions) for straight and shaped (softforming) edges with upper-lower cutters (In-Lay) Nwedpfx Agot N H Taowon Edge magazine for rolls E3 (compartment No. 6) End trimming unit HL 84 (2 x 0.8 kW) 0°-30° (max 25 m/min) 1st milling unit (2 x 0.55 kW) 0°-30° (pneumatic adjustment) 2nd milling unit (2 x 0.55 kW) 0°-30° (pneumatic adjustment) Universal milling unit for grooving/rebating and profiling UF11 (1 x 4 kW) 0°-90° Profile scraper unit PN20 (pneumatic) Finishing unit (flat scrapers + polishing unit) FA11

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood Code: RU0002875 - Manufacturer Code: 2-083-01-5203 - Condition: Used - Functionality: Not tested - If interested, we offer refurbishment services; please contact us. Njdpfev D H Ttjx Agwswn

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness for coils (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control system: POWERCONTROL PC23 Power Touch / WoodCommander software Feed speed (adjustable) m/min: 15 - 40 Nwjdpfx Agsv Rpdnewjn Safety and noise protection cabin. Retractable stop dogs, spacing (mm): 1000 Side adjustment of aggregate carrier, manual mm 30 – 80: for manual adjustment of workpiece overhang for gluing and finishing section FORMAT PROCESSING (for each side): - Protection cutter (pre-milling) (1 x 4.5 kW) - Chipping unit KD 11 (2 x 6.6 kW) + vacant space EDGE BANDING SECTION (for each side): - Gluing unit (hotmelt glue + pre-melter) A3 + QA65 - Edgeband magazine for coils (slot No. 2) - Edge pressure zone (CNC-controlled) - Type A - End trimming unit PK30 (2 x 0.8 kW), feed speed 30 m/min - Pre-milling unit BF20 (2 x 0.55 kW) - Multi-function unit (radius and contour milling) FF30 + FF32 (4 x 0.4 kW) FlexTrim - Vacant space - Scraper unit PN 20 - Finishing unit (flat scraper + smoothing unit) FA 21. Sprayer unit (for polishing fluid) - No. 3 universal milling unit for grooving/rebating and profiling SF20 (3 x 6.6 kW) (CNC-controlled)

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood code: RU0010261 - Manufacturer code: 2-055-05-1680 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Nodpfev Izy Nox Agwswn

Stanje: zelo dobro (rabljeno), YZ0105) PANEL SAW WITHOUT REAR TABLE, Model HPP 300/56/56 PROFILINE Control: Power Control POWER TOUCH, Software: CADmatic 4 - Professional Nwedpfofg Ewzox Agwsn No. 1 Rear Push Device – (PACK PREMIUM). No. 11 Clamping Grippers (1 x Power Concept) Max. Cutting Width (mm): 5600. Usable Infeed Stroke (mm): 5600. Max. Saw Blade Projection (mm): 80 Scoring Saw (max. saw diameter/power): 180 mm / 1.5 kW Main Saw (max. saw diameter/power): 350 mm / 11 kW (optionally 18 kW) Adjustable Saw Carriage Feed (m/min): 1 - 150 No. 5 Front Air Cushion Tables (mm 500 x 2810) Label Printer: PICA II 108 YZ0106) AUTOMATED PANEL STORAGE, Model TFL 211/10/05 Total Space Requirement (incl. panel saw): mm 10640 x mm 55660 Mobile Upper Bridge (X-axis) with traversing carriage (Y-axis) and corresponding vacuum suction unit (movable on Z-axis) Max. Speed of Mobile Upper Bridge (X-axis): 110 m/min Carriage Speed (Y-axis): 130 m/min Vacuum Suction Cup Assembly Speed (Z-axis): 70 m/min Vacuum Suction Cup Unit, rotatable by 90° Automated TLF Management System (via scanner) for cut panels (which remain in storage) Minimum dimensions: mm 800 x 2000 Stack Dimensions: Min. mm 2600 x mm 800 / Max. mm 5600 x mm 2200 Panel thicknesses (min/max): mm 12 / 40 Stack Height: mm 1000 Min. Panel Dimensions: mm 800 x 2000. Max. Panel Dimensions: mm 2200 x 5600 (ST 61)

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood code: RU0010261 - Manufacturer code: 2-055-05-1680 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Nwsdpfjv Izzgjx Agwjn

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDE SIZING AND EDGE BANDING LINE, max. working width 2500 mm, equipped with automatic loading and stacking system, consisting of the following machines: X04004A) Loading gantry (with 2 loading stations) “BARGSTEDT” TBH 500/D/30/14 X04004B) Workpiece turning device (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDR31/25/12 X04004C) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) Nsdelikvhepfx Agwjwn X04004D) Separation station “BARGSTEDT” X04004E) Double-sided sizing and edge banding machine “HOMAG” Model KFR 620/19/QA/25 X04004F) 1st boring machine “WEEKE” Model BST 500 D X04004G) 2nd boring machine “WEEKE” Model BST 500 D X04004H) Workpiece turning device (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDR 51/25/12 X04004I) Motorized transfer conveyor “HOMAG” TR 10/70/12 X04004L) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004M) Stacking gantry (with 2 unloading stations) “BARGSTEDT” Model TSP 420/40/30/12 BA

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ferwood Code: RU0011460 - Manufacturer Code: 2-056-17-8772 - Condition: Used - Functionality: Fully operational - Compatible Machine: CNC HOMAG - WEEKE - If interested, we offer overhaul/refurbishment services. Please contact us. Nwjdpfx Agjv I A H Djwsn

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (short line), max. working width 2500 mm, with automatic high-speed conveying system: O02006A) INFEED TABLE WITH ROLLER CONVEYORS "HOMAG" PROFI TBL100/30/12 O02006B)  ROTATION UNIT (longitudinal/transverse), "HOMAG" PROFI TDL/310/25/12 O02006C) Double-sided Sizing and Edge Banding Machine "HOMAG" Mod. PROFI KFL 526/10/A3/25 O02006D) ROTATION UNIT (transverse/longitudinal) "HOMAG" PROFI TDL 510/25/12 Nwsdpfx Agev D U Urowsn

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ferwood code: RS0003310 – Manufacturer code: 2-083-01-5203 – Condition: As new (showroom piece) – Functionality: Fully functional – If interested, we offer a refurbishment service, please contact us. Nsdpfxewp Npgo Agwjwn

Stanje: zelo dobro (rabljeno), 4-axis CNC machining center for milling, drilling, cutting, and edge banding. Gooseneck machine – safety tread mats at the front CNC control type PowerControl PC 85 (WoodWop software) 10 support/consoles (mm 1340) LEDs indicate the programmed positions of the vacuum clamps (Y-axis) Automatic tool changer (carousel-type, 18 positions) Usable working area (X - Y - Z) mm 6175 x 1550 x 60 Usable working area for edge banding (X - Y - Z) mm 6000 x 1475 x 60 2 working zones – 2 vacuum pumps (capacity 100 m³/h) Chip conveyor for removing waste from the machining process Total connected load: 27 kW Working units (top) 17 independent vertical drilling spindles (2.2 kW) 4 independent horizontal drilling spindles 1 vertical electrospindle HSK F63 (main spindle 11 kW) 1 groove saw unit 0°-90°, diameter (mm) 125 Edge banding unit Power Edge (Y-axis), gluing unit (hot-melt glue + pre-melter) Roll material (edge) thickness (min/max) mm 0.4 - 3 Nwedsh Ucn Repfx Agwjn Edge magazine for rolls (2 positions)

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood Code: RU0000033 - Manufacturer Code: 2-083-01-5079 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Nwodpfowtfyisx Agwjn

Stanje: zelo dobro (rabljeno), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) Nsdjivawpopfx Agwewn No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor belt Total connected load (kW): 20

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood Code: RU0010116 - Manufacturer Code: 2-083-02-8407 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Nwedpfx Aowtgcrsgwen

Stanje: zelo dobro (rabljeno), EDGEBANDING AND POSTFORMING LINE for ONE-SIDED POSTFORMING PROCESSING (FOR DIRECT METHOD) Consisting of the following machines: A) Double-sided portal feed "TREVISAN" with motorized roller conveyor B) HOMAG Single-sided POSTFORMING MACHINE FOR DIRECT METHOD, Model Profi VFL79/3/P/A - Maximum laminate thickness: 0.35 mm (for L- and U-profiles) - Workpiece thickness (min/max): 16 / 30 mm (optionally up to 50 mm) - Minimum workpiece width: 150 mm - Feed speed: 10 – 32 m/min - Control system: PC 22 / Software package woodCommander - 01° Standard milling unit 2.2 kW (for scoring from above) - 02° Hogging unit 15 kW (for pre-milling from above) 0° - 15° - 03° Standard milling unit 6.6 kW (for rabbeting above), motor shaft for hydro tension - 04° Standard milling unit 6.6 kW (for rabbeting below) 0° - 120° (with hydro tension) - 05° Radius milling unit 0.7 kW (for profile trimming) - 06° Milling unit for top layer on U-profiles, HSK25 1.85 kW - 07° Universal milling unit UF 11 4 kW (for grooving or rabbeting) - 08° Milling unit 2.2 kW (for chamfer and laminate overhang milling above) - 09° Milling unit 2.2 kW (for bending groove milling below) - 10° RIGHT: Standard milling unit 6.6 kW (for grooving or rabbeting), working width 160 - 1050 mm - 11° RIGHT: Milling unit above and below, 2 x 1 kW, 0° - 25° - 12° Workpiece cleaning postforming, blower 0.55 kW Nwedpfxjnzhxqe Agwen - 13° Laminate overhang monitoring (for detecting laminate breakout) - 14° Compact gluing unit PU34 + QA34, slot nozzle glue application - 15° Basic pressure zone for L-profile VF Direct, for workpiece thickness max 50 mm - 16° Basic pressure zone for U-profile VF Direct, for special profile R = 2.5 mm - 17° Top rotary knife - 18° Top milling unit 1 x 0.55 kW, 0° - 30° - 19° Top buffing unit with oscillation 1 x 0.25 kW C) Double-sided portal stacking system "TREVISAN" with motorized roller conveyor

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood Code: RU0011613 - Manufacturer Code: 3-012-05-2040 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Nsdpfxewtgu Ie Agwswn

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edge) thickness (min/max) mm: 0.6 - 3 Panel thickness (min/max) mm: 8 - 60 / Working width (min/max) mm: 225 - 3000 Control/Software: Power Control PC 22 - Wood Commander Feed speed (adjustable) m/min: 15 - 32 Nodep N D Ngjpfx Agwown Cam distance (mm): 400 EDGING PROCESSING (per side): Protection milling cutter (pre-milling) 1 x kW 4.5 Roughing unit KD 11 (2 x kW 6.6) EDGE BANDING SECTION (per side): Gluing unit (Hot melt glue + pre-melter) A3 + SERVO Edge pressure zone “A” Edge magazine for rolls (compartment No. 2) End trimming unit HL 84 (2 x kW 0.22) Pre-milling unit (2 x kW 0.55) Milling unit 2 x kW 0.4 Profile copying milling unit FF 12 (4 motors x kW 0.4) LEFT SIDE: 2 x Universal milling units (electro-pneumatically controlled) UF 11 (kW 4 x 2) 0°-90° RIGHT SIDE: 1 x Universal milling unit (electro-pneumatically controlled) UF 11 (kW 4 x 1) 0°-90° Multi-profile scraper unit PN10 (PNEU) Finishing unit (flat scraper + smoothing unit) FA 11

Stanje: zelo dobro (rabljeno), Double-Sided Edge Banding Machine - Edge Thickness (coil) (min/max) mm: 0.3 - 3 - Workpiece Thickness (panel) min./max. mm: 12 - 40 - Working Width (min./max.) mm: 250 - 2500 - PC Control: PC22 Nwedpfx Agjwk Hp Tswjn - Top Pressure System with Driven Rubber Belts - Adjustable Fence Linear Feed Rate m/min: 10 - 32 - Liquid Glue Unit - Jointing Milling Unit (vertical milling machine): 2x 4 kW at 9000 rpm - Quickmelt Hot Melt Adhesive Unit A3 - Pressure Zone C (manual adjustment) "A" - Coil Holders for 2 Rolls - End Trimming Unit: HL 84 (2x 0.22 kW at 12000 rpm) - Premilling Unit (2x 0.4 kW at 12000 rpm) - Finishing Unit (Flat Scraper Unit + Buffing Unit): FA11 - Polishing Unit

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control: NC 21 / HOMATIC Feed speed (adjustable) m/min: 15 - 50 Safety and noise protection cabin Cam pitch (mm): 500 FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-stick) Nedpfx Aohvi E Iegwewn Protection milling unit (pre-milling) 1 x kW 4.5 Chipping unit KD 11 (2 x kW 6.6) LEFT SIDE: Universal milling unit (electropneumatically controlled) SF 20 (kW 6.6 x 1) 0°-90° RIGHT SIDE: Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (station No. 6). Edge pressure zone “A” (1 + 4 rollers) End trimming unit HL 04 (2 x kW 0.18) Pre-milling unit OPTIMAT (2 x kW 0.55) Multi-function unit (radius milling and contour milling unit) FK 11 - 2 x kW 0.4 Multi-profile scraping unit PN 20 Flat scraping unit (pneumatic) Polishing unit (2 x kW 0.25)

Stanje: zelo dobro (rabljeno), A) Case clamp with CNC (electronic) Type MDE 110/28/08 Nsdpfx Agslkbn Ijwewn Motorized transport and assembly conveyor Feed speed: 12 - 40 m/min CNC control Power Control PC C 22 T Total power 14 kW Overall machine length 6,220 mm Processing capacity for workpieces (mobile): Length Min / Max: 250 / 2,800 mm Depth Min / Max: 120 / 800 mm Height Min / Max: 280 / 1,320 mm B) Motorized transport conveyor Mod. MTB 200/20/08 (length 2,000 mm) C) Motorized transport conveyor Mod. MTB 200/20/08 (length 2,000 mm)

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in roll form (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 225 / 2500 Control system: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Retractable positioning cams, distance (mm): 1000 FORMAT PROCESSING (for each side): Pre-milling cutter (1 x 4.5 kW) Zerspanner KD 11 (2 x 6.6 kW) Nwsdpjuhv R Dsfx Agwon Jointing milling unit UF 20/S2 (2 x 4 kW) EDGE BANDING SECTION (for each side): “ZERO JOINT” SCHUGOMA Kantenking gluing unit (Option: EVA/PU glue) Edge magazine for rolls (2 compartments) Edge pressure zone (CNC-controlled) type A End trimming unit HL 84 BEVEL/STRAIGHT (2 x 0.22 kW) feed speed 25 m/min Pre-milling unit BF10 (2 x 0.55 kW) Multifunctional unit (radius and profile milling) FK11 (2 x 0.4 kW) Multiple-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + buffing unit) FA 11. Spray unit (for polishing fluid) No. 2 universal milling units for grooving/rabbetting and profiling SF20 (2 x 6.6 kW) Powered panel infeed roller conveyor with "HOMAG" separation system Model POWER TBL 100/20/25

Stanje: zelo dobro (rabljeno), Single-sided Edge Bander (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 80 Edge thickness in strips/bands (min/max) mm: 0.4 / 20 Control system: NC21 Nwodpfel Iz Tuox Agwon Feed speed m/min: 18 Top pressure: V-belt driven Adjustable fence: CNC-controlled Jointing milling unit: 2 x 3 kW Gluing unit (Hot Melt + Pre-melter): A20 + A34 Edge pressure zone "C" Edge magazine for rolls (compartment no. 1) End trimming unit WK 14 (2 kW, 0.8 to 12,000 rpm), electro-pneumatic adjustment, chamfer/straight Pre-milling unit Optimat (2 x 1.5 kW) Milling unit MF20 (2 x 0.55 kW) Profile copying milling unit FF12 (4 x 0.4 kW), CNC (WD40) Free space for profiling scraper unit Finishing unit (Flat scrapers + Buffing unit) FA 10