HOMAG SIZING & EDGE BANDING-SOFTFORMING

HOMAG + MAHROS KFL 620 SOFTFORMING + Brush AUTOMATION

Stanje: zelo dobro (rabljeno), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Spindles per drilling unit of lower supports (qty): various Upper vertical drilling supports (qty): 2 Drilling units per upper vertical support (qty): 2 Spindles per drilling unit of upper supports (qty): 2 Upper vertical workpiece clamps (qty): 6 Chedpfx Agsh Ryhnj Eed Chip conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Stanje: zelo dobro (rabljeno), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE (also SOFTFORMING) with through-feed drilling machines, splitter, and high-speed automatic conveyor technology. Configured as follows: A) Infeed station – Stacking system (gantry) "RBO (BIESSE)" model Winner C (1) B) 1st Double-sided sizing and edge-banding machine "BIESSE" model Stream SB1 11.0 Softforming C) 1st Rotation station (90° LONGITUDINAL–CROSS) "RBO (BIESSE)" model GPK-1 D) 2nd Double-sided sizing and edge-banding machine "BIESSE" model Stream SB2 9.5 E) 2nd Rotation station (90° STRAIGHT or CROSS–LONGITUDINAL) "RBO (BIESSE)" model GPK-2 F) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (No. 2 horizontal drilling supports, No. 6 lower vertical drilling supports, and No. 3 upper vertical drilling supports) Chjdpfettgy Hex Ag Esd G) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (No. 2 horizontal drilling supports, No. 6 lower vertical drilling supports, and No. 3 upper vertical drilling supports) H) 3rd Rotation station (90° STRAIGHT or CROSS–LONGITUDINAL) "RBO (BIESSE)" model GPK-3 I) Longitudinal panel saw (splitter) "GM (for BIESSE)" model Split 4-84 LT L) Outfeed station – Stacking system (gantry) "RBO (BIESSE)" model Winner SC (2)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND SIZING LINE (Half Line) with automatic high-speed handling system: A) FEEDING STATION (portal) "RBO" Model Advantage C 320 Double Station, complete with central motorized roller conveyor. B) TURNING TRANSFER (longitudinal/crosswise), with double cone "RBO" Model GPK-1 C) Double-sided edge banding and sizing machine "BIESSE" Model Stream SB2 11.0 D) PANEL FLIPPER (180°, with top side down) "RBO" Model Ribaltatore E) TURNING TRANSFER (crosswise/longitudinal), with double cone "RBO" Model GPK-2 F) STACKING STATION (portal) "RBO" Model Advantage SC 3200 Double Station, complete with central motorized roller conveyor. Csdjhvah Nspfx Ag Eohd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, 4-stranska FORMATIRNA in ROBNA LEPILNA LINIJA Dimenzije plošč: MIN. mm 195 x 250 x 60 / MAX. mm 1200 x 2500 x 60 Sestavljena iz naslednjih strojev: O12044a) Vhodna miza 'HOMAG' Mod. TBL 100/25/12/S z gnanim valji Cedpfx Aex Aqbheg Eehd O12044b) 1. Dvostranski formatni in robni lepilni stroj 'HOMAG' Mod. EDGETEQ D-610 (KFL 525/5/A3/15) O12044c) Obračalna postaja (90° vzdolžno-prečno) 'HOMAG' Mod. TDL 310 / 25 / 12 O12044d) 2. Dvostranski formatni in robni lepilni stroj 'HOMAG' Mod. EDGETEQ D-610 (KFL 526/6/A3/25)

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in one line) Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips/battens (min/max) mm: 0.4 - 12 Panel thickness (min/max) mm: 8 - 100 Chjdett Iudepfx Ag Eed Working width (min/max) mm: 240 - 3000 Control system: Power Control PC22 (Windows XP) Software woodCommander Feed speed (adjustable) (m/min): 10 - 40 Safety and sound-insulation cabins Retractable positioning stops, distance (mm): 400 FORMAT PROCESSING (for each side): Jointing milling unit (2 x 6.6 kW) Open space Left side only: 2 x universal milling units (rotatable) (2 x 6.6 kW) EDGE BANDING SECTION (for each side): Gluing unit (Hot Melt glue + premelter) E34 Pressure roller track (revolver type) for straight and shaped (softforming) edges, GL sextuple Edge magazine for coils (1 slot) End trimming unit WK14 (2 x 0.8 kW) 25 m/min (0°-30°) Milling unit (2 x 0.55 kW) 0°-30° Contour copying unit (tracing) FF12 (4 motors) WD70 20 m/min Profile scraping unit PN20 Finishing unit (flat scraper + buffing unit) FA11

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge Material (Rolls) Thickness (min/max) mm: 0.3 - 3 Edge Thickness in Strips (min/max) mm: 1 Panel Thickness (min/max) mm: 8 - 60 Control Unit: ICOS Open Compact Feed Speed m/min (adjustable): 6 - 30 Top Pressure: Belt-driven Spraying Unit (for liquid non-stick agent) Adjustable Fence, CNC controlled Pre-milling Unit with CNC control 08.378 (2 x 4.5 kW) Lamps for panel side heating Gluing Unit (Hot Melt Glue + pre-melter) 04.1570 Spraying Unit (for separating fluid) Edge Pressure Zone Edge Magazine for Rolls (compartment no.): 16 Chedpfx Ajm Udfwog Ejd Cross-cutting Unit 08.42/30/B (2 x 0.66 kW - Pneumatic 0° - 25°) 30 m/min Multi-profile Milling Unit (CNC controlled) 08.0587 (2 x 1 kW) Spraying Unit (for sliding fluid) Contour Trimming Unit (for fine trimming) CNC controlled KFA 30 (08.355 - 1 x 0.5 kW) 30 m/min Shaping Copy Milling Unit 08.604 (4 x 0.25 kW) Spazzola Multi-profile Scraper Unit (CNC controlled) 08.516 Flat Scraper Unit 08.521 Spraying Unit (for polishing fluid) Buffing Unit 08.617-4 (4 x 0.18 kW) Surface Smoothing Unit 08.53

Stanje: rabljeno, številka stroja/vozila: 008121, Vrsta obdelanega roba: tanek rob, močan rob, masiven les Chjdpfxow Idhts Ag Eod Lepilni sistem: PUR Večfunkcijska enota: da Maksimalna širina plošče: 3000 mm Maksimalna hitrost podajanja: 32 m/min Delovne enote, desna stran: 10 Delovne enote, leva stran: 10

Stanje: rabljeno, Automatic double cell loader without pit for use in an edging line Motorized panel infeed transfer Double automatic panel loading station Suction cup system for panel handling Panel remover Panels can also be processed in double rows Usable panel width: 1300 mm Usable panel length: 3200 mm Vacuum pump Cederzhfhjpfx Ag Eohd Motorized transfers for loading panel stacks Motorized adjustment via automatic numeric control of horizontal suction cup support bars Programming and control system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, 1 Panel dividing saw with area storage Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – Right-handed machine Year: 2008 Including integrated area storage PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore storage management software, scrap management, etc. Storage area approx. 37 x 11.5 m Maximum stacking height in storage: 2,500 mm Chjdpfx Aoyw Ivhjg Eed Speed Concept: Setting a completely new benchmark, revolutionizing panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage + Substantial acceleration of the pusher + Central angle alignment device + Electronic height control of the pressure beam + Optimized movement sequences with integrated gripper measurement system Cutting length: 5,600 mm Cutting width (pusher carriage travel): 5,600 mm Panel rotation device for head cuts Laser alignment light for marking the cutting line on the workpiece for visual or scribed cutting Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle feeding of sensitive single panels by vacuum, as well as efficient infeed of panel stacks Saw blade projection: 130 mm Saw carriage feed: Forward: 1–150 m/min Reverse: constant 150 m/min Pusher speed: Forward/reverse: 90 m/min (In EU countries, forward = 25 m/min) Automatic pressure beam height adjustment: yes Automatic cutting height control: yes Adjustable pressure beam clamping force: yes Adjustable gripper clamping force: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device Minimum clamping width: 0 mm Maximum clamping width: entire cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT WITH LIFTING ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTION FENCE Program-controlled ejection of part stacks into the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVING PROGRAM (AUTOMATIC) Grooving program with graphical input and process graphics. Positioning accuracy: Groove depth continuously adjustable via control system (hydraulic stop) CUT-OUT / STRESS-RELIEF CUT PROGRAM PART LABELING WITH GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermal transfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' – JUST-IN-TIME – Additional function 'Just-in-time' (possible operating modes): 1. Optimization at the saw ----- - Import function for parts lists from industry packages, Excel, etc. - Inclusion of available remnants in the optimization - In case of production interruption, unproduced parts can be re-optimized - Free selection of which parts with which material to optimize and produce at what time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available remnants - Change panel sizes - Combine runs, etc. A new optimization then takes place directly at the saw. DATA TRANSFER ONLINE + USB PORT CAMERA MONITORING OF THE FEED AREA Material specification for lift table feeding: Maximum waviness: 40 mm/m Minimum panel thickness: 6 mm Maximum thickness tolerance per panel: +/- 0.2 mm Stacking accuracy: +/- 50 mm

Stanje: rabljeno, številka stroja/vozila: 008269, Pozicija 1: Nakladalec IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Cedpfex A Hggjx Ag Eohd Pozicija 2: Obračalec plošč IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 3: Dvostranski robni lepilni stroj IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 4: Obračalec plošč IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 5: Razkladalec IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3