4-SIDE SIZING & EDGE BANDING-SOFTFORMING

BIESSE + RBO Stream SB softforming + FDT CN + Winner

Stanje: novo, Leto izdelave: 2024, Osama Automatic 4-Roller Glue Application Machine Type: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. passage height: 0 - 100 mm Speed: 22 m/min Cjdpfx Aju I R Utog Eehd Working height: 900 mm Roller diameter: 250 mm Motor power: 3 kW Electrics: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer board, chipboard, composite materials, and drywall panels. This type of gluing machine allows precise and homogeneous dosing of glue, taking into account the corrugation of the rollers, which must be suitable for the type of production. The heavy-duty structure and the roller core, which is manufactured with increased thickness compared to earlier models, enable high production rates without major issues and bonding of materials up to a width of 2200 mm. Roller removal for maintenance is a simple process, as the supports can be separated into two halves via an easy bayonet coupling. It is also possible to equip the gluing machine with various accessories, such as an electronic speed controller, automatic roller washing device, and an automatic lifting device for the upper roller with position display on the screen. The S4R/P gluing machine can be used for various types of production, including in the construction sector and for manufacturing foam panels and mattresses. Equipment features: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm, PVC rollers 60 mm, spacing: 200 mm - Outfeed table TDF 1400x3000 mm, disc rollers D: 122 mm, stainless steel Location: Ex stock 54634 Bitburg - Available immediately -

Stanje: zelo dobro (rabljeno), ENOSTAVNA STROJ ZA OROBOVANJE ROBOV (LEVA STRAN) Chjdpozku Rpjfx Ag Esd Debelina robov v zvitkih (min/maks) mm 0,3 / 3 Debelina robov v letvah/trakovih (min/maks) mm 0,4 / 20 Debelina plošč (min/maks) mm 8 / 60 Nadzor POWER CONTROL PC23 Powertouch / WoodCommander (pripravljen za TAPIO) Hitrost podajanja m/min 16-25 Tlak na valj, pogon s klinastim jermenom Naprava za nanašanje ločilnega sredstva, zgoraj/spodaj Nastavljivo vodilo, nadzorovano s sistemom C.N. Naprava za obdelavo robov 2 x Kw 3 Naprava za ogrevanje robov Naprava za nanašanje lepila (vroče taljeno lepilo + predgrevalnik) FE-MA-TECH + QA/PU + PU65 Območje pritiska na rob (nadzorovano s sistemom CN) "C 7" Magazin za robove (oddelek št. 2) s servo-sistemom za podajanje robov Odrezna naprava PK 25 (2 x Kw 0,8) maks 25 m/min Predobdelovalna naprava BF20 (2 x Kw 1,5) Večprofilna obdelovalna naprava MF21 (2 x Kw 0,55) 0°-20° Večfunkcijska naprava (obdelava zaobljene robove in oblikovalna naprava) FK 30/V20 (1 x Kw 0,7) nadzorovano s sistemom CN Univerzalna obdelovalna naprava za utore/fuge in profiliranje SF 21 (1 x Kw 5) 0°-90° Večprofilna naprava za obdelavo robov MN 21 (nadzorovano s sistemom CN) Ploski noži FA20 Naprava za poliranje FA06 (2 x kW 0,18) + prosti prostor

Leto izdelave: 1982, stanje: rabljeno, V dobrem stanju Cedjdq Ug Ispfx Ag Eohd

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, številka stroja/vozila: AH00004861, Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 6 letvica, temperatura: 15 °C, NEW OPTIONED EDGE BANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Brand: SCM Model: K360 T-ER1 Year: 2023-2024 CE Ref: AH00004861 WORKING CAPACITIES: - Panel height to be processed: 8 - 50 mm Thickness 10 to 45 mm when using the corner rounding unit - Panel length to be edged: 210 to 2500 mm Chjdpfjttakhjx Ag Esd - Minimum panel width to be processed: 90 to 1100 mm - Edge thickness (roll): 0.4 to 3 mm without corner rounding Max 3 mm when using the corner rounding unit - Edge thickness (strip): max 6 mm without corner rounding Max 3 mm when using the corner rounding unit - Edge width: panel thickness +2 mm on each side - Feed (advance speed): 11 m/min - Workpiece interval: 600 mm - Overhang of workpiece relative to transfer chain (panel overhang): 30 mm MACHINE CONFIGURATION: - Unwinding table (edge reel holder) - Prepared for optional air cushion table - Frontal extension worktable - Feed track: chain - Anti-adhesion spray unit - Edge trimming units (2 spindle moulders) t/min Diamond tools - Glue spreading unit with interchangeable glue pot Pneumatic pre-shearing guillotine Pressing (marouflage) with 3 rollers, one powered - End cutting unit with circular saw blade - Top/bottom flush trimming unit with nesting copy function - Corner rounding unit - Radius scrapers - Straight scrapers - Edge finishing misting device (nebulizer) - Buffing station with textile polishing brush - Main power supply: 400V. Three-phase+N+E 50Hz Options installed on the machine: - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion table at machine infeed - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick unit - 62.12.61 Misting device for edge finishing - 62.14.55 Diamond tools H=64 on trimming group – 2 cuts - 62.15.06 "SGP-E" glue pot – replaces standard glue pot - 62.15.04 "RC-N" glue scraper unit - 62.12.12 "SP-V" brush unit Machine available: in stock

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hotmelt adhesive application to straight workpieces (EVA/PUR glue tank with drain function optional), twin-motor HF end-trim saw station, HF combination milling unit, corner copying unit, chain feed, motorized upper pressure with encoder and double roller upper pressure with ball bearings, extendable workpiece support rail, signal lamp for workpiece sequence, integrated transport control for contactless operation of processing functions, and L-Motion (6 axes) control. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 10 – 60 mm. • Two counter-rotating, program-controlled jointing units with diamond-tipped spiral cutters ensure clean, tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity; drip-free with glue reserve feeding from below (excess glue is automatically returned to the pot); precise glue application via glue roller; separate glue roller temperature setting; electronic temperature control with automatic standby function (prevents glue from burning if the machine remains on for longer periods without use). Optional: EVA/PUR glue pot with drainage/cleaning function for quick color change. Codpsl Rix Ejfx Ag Eshd Optional: Quick-change system for glue pot. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, counter-conical pressure rollers with spring tension, providing optimal adhesion of the edge material to the workpiece. Motorized adjustment of the pressure zone (1xL-Motion). • High-frequency end-trim saw equipped with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades; pneumatically tiltable from the control panel. • HF combination milling station, two powerful 0.55 kW HF motors with carbide-tipped special cutters. Motorized adjustment of the milling station (4xL-Motion). • Corner copying unit: automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge material. (Not recommended for soft and post-formed profiles). Optional one-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1xL-Motion). • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module. • Standard equipment includes LED lighting and LED-Motion system. • Optional: motorized adjustable infeed rail from the control panel (1xL-Motion). Optional finishing units (3 free slots): - Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder; radius selection (R1/R2) switchable from the control panel. - Surface scraper unit: removes glue residues from the workpiece surface along the glue joint with a gentle scraping cut; pneumatic ON/OFF control via air cylinder. - Buffing unit: 2 motors, 0.09 kW, 1,500 rpm, for super-finish results.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, AT SERIJA Vstopni model vlaknastega laserskega stroja za razrez pločevine in cevi En stroj, dve funkciji. Serija AT reže tako kovinske pločevine kot tudi kovinske cevi. Laserski stroji za razrez pločevin in cevi, serija A-T Izboljšana funkcionalnost Laserski stroji za rezanje pločevin in cevi, serija A-T Baza podatkov za visoko hitro rezanje Učinkovitost hitrega rezanja z zrakom se poveča za 37 %, ko režete ogljikovo jeklo. Laserski stroji za rezanje pločevin in cevi, serija A-T Aktivna funkcija preprečevanja trčenj Glave vlaknastih laserjev zaznavajo izbočene ovire in s tem učinkovito zmanjšujejo stopnjo poškodb ter znižujejo stroške vzdrževanja laserskega stroja. Laserski stroji za rezanje pločevin in cevi, serija A-T Bodor Lightning Izjemno hiter preboj materiala v povezavi s sistemom BodorGenius omogoča popolno izvedbo prebijanja med pomikom glave laserja po Z-osi. Laserski stroji za razrez pločevin in cevi, serija A-T Brez vibracij pri rezanju tankih pločevin Postopek rezanja poteka nemoteno tudi na robovih tankih pločevin ter zagotavlja rez brez valov ali tresljajev. Laserski stroji za rezanje pločevin in cevi, serija A-T Rezanje kotnika in U-profila Rezanje kotnikov in U-profilov je standardna funkcija, ki ne potrebuje dodatne namestitve. Laserski stroji za rezanje pločevin in cevi, serija A-T Iskanje robov na štirih straneh za višjo natančnost Optimizirana metoda in algoritem za iskanje robov zagotavljata večjo natančnost reza ter boljšo stabilnost stroja. Mehanska konfiguracija Laserski stroji za rezanje pločevin in cevi, serija A-T Raztegljivi aluminijasti prečni nosilec Postopek raztezanja pri ultra visokem pritisku in lahko zasnovana konstrukcija; togost povečana za 60 %; masa znižana za 20 %; hitrost pomika stroja povečana za 50 %. Laserski stroji za rezanje pločevin in cevi, serija A-T Modularna delovna miza Modularna miza s prečniki skrajša čas demontaže ter poveča priročnost in togost. Laserski stroji za rezanje pločevin in cevi, serija A-T Pnevmatski vpenjalni sistem Vpenjanje materiala je enostavno in hitro, vpenjanje v 3 sekundah ter visoka ponovljivost natančnosti. Programsko Orodje Codpfx Agehtyuto Eohd BODORTHINKER BodorThinker je visokotehnološki inteligentni krmilni sistem za CNC laserske stroje, ki odlikuje zanesljiva stabilnost, enostavna namestitev in nastavitev, varno delovanje, široka funkcionalnost ter odlične zmogljivosti. Z BodorThinker je mogoče ustvariti modularne, prilagojene, avtomatizirane in informacijsko podprte rešitve laserskega razreza. Oblikovanje Nagrajen industrijski dizajn “Oskar za dizajn”: dobitnik dveh od treh največjih svetovnih nagrad za industrijski dizajn. Daljinsko upravljanje Ergonomska zasnova v obliki manga in priročno magnetno pritrdilo omogočata enostavno enoročeno upravljanje.

Stanje: rabljeno, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Production Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL CNC Path Control (Solution Line) with 5 simultaneously controlled axes Travel distances: X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as a swiveling bridge +/- 135° (270° total) B-axis 360° infinite rotation Axis acceleration X + Y axis: 6 m/s² Axis acceleration Z axis: 9 m/s² Feed force X + Y axis: 7500 N Feed force Z axis: 10,000 N Positioning tolerance (X/Y/Z): 0.008 mm Swivel speeds A-axis: 180° rotation in 4 sec. Interference circle diameter in swing bridge: max. 1400 mm Transport load in swing bridge: max. 700 kg Tool holder: HSK 63 Spindle speed: max. 12,000 rpm, stepless Spindle power: 37 kW at 40% duty cycle Spindle torque at 40% duty cycle: 85 Nm Max. spindle torque: 100 Nm Tool change time (chip to chip): approx. 3.7 sec. Tool diameter with adjacent slots occupied: Ø 140 mm Tool diameter with adjacent slots empty: Ø 250 mm Max. tool length: 400 mm Max. tool weight: 20 kg Power supply: 400 Volt, 50 Hz Connected load: 80 kVA Codpfx Aot Ac Efog Eohd Compressed air connection: 5–8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (power 37 kW/40% duty cycle) with liquid cooling and recooling unit - LICON 2-axis rotary tilting table as B and C axis, with hydraulic axis clamping - Zero-point clamping system on the rotary table of the tilting axis - Double pallet changer, without pallets (must be procured separately) - Media transfer for 5 single-acting pressure lines for oil or air for workpiece clamping on pallets. Hydraulic functions range from 30–150 bar, pressure monitoring (controllable via M functions) - Tool changer with 30 positions, disc-type turret - Machine configured for dry machining with MMS minimum quantity lubrication system - MMS-IKZ, internal MMS lubrication supply through spindle - Drag-chain chip conveyor, discharge height 1150 mm - Licon ECO Mode (energy efficient operation) - Direct path measuring system in all axes - Recorded operating hours with control voltage on: approx. 7,500 h Operating space required (L x W x H): 9000 x 5000 x 3800 mm Transport space required (L x W x H): 6100 x 4400 x 3600 mm Weight of base machine: approx. 21 t Total weight: approx. 24 t Very good condition

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), - RABLJEN - 6-OSNI AVTOMATSKI STRUŽNI STROJ S POMIČNO GLAVO IN DOVAJALNIKOM PALIC MAKSIMALNA DOLŽINA OBDELOVANJA: 320 mm MAKSIMALNI PREMER OBDELOVANJA: 32 mm VRETENO: 200–8000 min⁻¹; 3,7–7,5 kW PROTIVRETENO: 200–7000 min⁻¹; 1,5–2,7 kW POMIK OSI X1: 108 mm POMIK OSI X2: 228 mm POMIK OSI Y1: 275 mm Chjdpfjvthv Iox Ag Esd POMIK OSI Z1: 325 mm POMIK OSI Z2: 130 mm POMIK OSI Z3: 410 mm HITRI POMIKI OSI X-Y-Z: 20 m/min REVOLVERSKA GLAVA Z GNANIMI ORODJI: 8 POZICIJ; 200–5000 min⁻¹ KRMILNA ENOTA: CINCOM SYSTEM M6D DOVAJALNIK PALIC: IEMCA Mod. BOSS 332 EVOLUTION TEŽA: 2850 kg DODATNA OPREMA: LOVILEC OBDELOVANCEV

Leto izdelave: 2003, stanje: zelo dobro (rabljeno), For sale: KURTZ VBR-S3 Cutting Line (complete set: KURTZ VBR-S3 cutting line, KUKA selection robot, VIRO PPZA-1300/24/MZG packaging unit, palletizing, wrapping) EPS block cutting line for maximum block dimensions of 5000 x 1200 x 1200 mm. Optionally, blocks with dimensions 600 x 1200 x 2400 mm can also be processed. Complete U-shaped line consisting of: - Block buffer loading by tipper - Horizontal cutting with automatic wire positioning, featuring dual-frame cutting and wire oscillation - EPS waste/scrap removal system: top, bottom, sides - Side cutting with manual wire positioning - Down cutter with automatic wire positioning - Anthropomorphic product selection robot - VIRO packaging machine - Bundle turning station for crosswise arrangement - Palletizing of various sizes of EPS panels on wooden pallets or bonded EPS laths as a base under the EPS bundles column - Automatic stacker/palletizer allowing the formation of columns up to 3 meters in height and up to 3 meters in length - Vertical stretch wrapper for automatic wrapping of EPS bundle columns - Inkjet printers and automatic labelers included - Siemens S7 PLC controller Chjdpfx Agsuct Upe Ejd - Complete with protective railings with safety switches - High-capacity line, in very good condition, requires approx. 600 m² of floor space (40m x 15m) - Year of manufacture: 2003 - Electrical supply: 400V; 50Hz; 115kW; 300A

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Chedpfjdh Tfgox Ag Esd Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space