Dvosmerni stroj za lepljenje robov

HOMAG KFL 526

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, This HOMAG KFL 526 / C was manufactured in 2006. The robust double-sided edge banding machine processes workpiece thicknesses from 12 to 40 mm and formats up to 2500 x 1200 mm. The equipment includes a gluing unit, a profile milling unit, and a finishing unit for precise edge processing. Ideal for efficient edge banding at speeds of up to 35 m/min. Contact us for more information about this machine. Additional Equipment • Top/bottom separating agent spraying device / Double hogger unit longitudinal/crosswise: 6.6 kW with electro-pneumatic control / Gluing unit A3 - 2 rollers / Profile milling unit FF12 top/bottom with motors at 12,000 rpm / Finishing unit FA11 top/bottom / Stepless stop cams with a maximum cam overhang of 25 mm / Standard milling unit SF20 6.6 kW / Rough trimming unit 0.55 kW Nodpfx Abox U Uzrobjkt • PUR Nordson melting station / tool set / extraction duct Machine advantages Technical machine advantages • Workpiece thickness: 12 - 40 mm / minimum workpiece size (LxW): 250 x 240 mm / maximum workpiece size (LxW): 2500 x 1200 mm / maximum workpiece weight: 50 kg • Edgebanding tape thickness: 0.4 - 3 mm / maximum edge cross-section (plastic): 135 mm² / maximum edge cross-section (veneer): 100 mm² / maximum roll diameter: 830 mm • Longitudinal processing speed: up to 35 m/min for thin edges up to 0.6 mm / up to 30 m/min for thick edges up to 3 mm • Cross processing speed: up to 30 m/min for panel dividing / up to 20 m/min for edge processing • Minimum workpiece spacing: 500 mm

Stanje: rabljeno, Leto izdelave: 2009, Numerical Control POWER CONTROL PC 22 Machine suitable for the first and second panel pass Mobile motorized shoulder opening via NC, 3000 mm Maximum panel height: 60 mm PVC-ABS edge thickness: 3 mm Feed speed: 40 m/min Feed speed with corner rounding: 20 m/min Motorized rubber pressure belt Support rail with retractable pin (distance between pins: 500 mm) Squaring section consisting of: Non-stick unit Time-controlled automatic chip guard unit Double trimming unit Space reserved for future group extensions Gluing unit with pre-melter and glue pot Automatic adjustment of pressure rollers for edging Edge holder magazine with 2 positions Trimming unit with two motors Overlapping cut-off unit Nksdpfx Aepp Tkfsbbjt Corner rounding group (FK) Scraper unit for edges Glue scraper unit Buffing unit Non-stick unit

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dvostranski, Additional equipment: Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW PUR OTT 2kg Melting Station / Machine Benefits Technical Machine Benefits Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing Nkodexwui Ejpfx Abbjt Minimum workpiece gap: 500 mm

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 60 Working width (min/max) mm: 225 / 2500 Control: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Cam spacing (mm): PROCESSING UNIT (for each side): Sprayer unit (for liquid anti-stick) Pre-milling cutter (profile trimming) 1 x kW 4.5 Chipper KD 11 (2 x kW 6.6) – free space EDGEBANDING SECTION (for each side): Gluing unit (PUR glue + premelter) QA 34 (FeMa-Tech) Pressure zone (CNC-controlled) "A" Edge magazine for rolls (compartment No. 6) End trim saw HL84 (2 x kW 0.22) 0°-30° Pre-milling unit (2 x kW 0.55) Nksdpjwxwyfefx Abbjt Contour milling unit (for fine trimming) CNC-controlled FK 13 (2 x kW 0.4) turret 8+8 Free space Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + smoothing unit) FA 11 OPTION: Universal milling unit for grooving/rabbetting and profiling UF11 (1 x kW 4)

Stanje: rabljeno, Leto izdelave: 2013, Numerical control PC office with Widge Plus software Machine suitable for 1st and 2nd panel pass Motorized mobile shoulder opening via NC, 3200 mm Panel width min - max: 215 - 3200 mm Panel height min - max: 10 - 60 mm Edge thickness in coil, min - max (PVC-ABS): 0.3 - 3 mm Infinitely variable feed speed: 10 - 40 m/min Motorized pressure rubber belt Support track with retractable pins Pin height: 12 - 18 - 25 mm Distance between retractable pins: 500 / 400 mm Working units mounted on NC-motorized top tables Nkodpfsk Egvdjx Abbot Squaring section consists for each side of: Non-stick group Timed splinter guard automation Double milling unit Edging section consists for each side of: Gluing unit with pre-melter for PUR adhesive and pre-melter for EVA adhesive Edge pressure rollers, electronically controlled by NC Edge holder magazine with 6 positions Cutting unit with two motors Overlapping cutting unit Staggered trimming unit with two electronically NC-controlled motors Corner rounding unit with 4 motors 0-90° swiveling planer group, electronically CN-controlled (mobile shoulder) 0-90° tilting milling unit + dual stacked milling spindle (fixed shoulder) Anti-adhesive groups Edge scraper unit Glue scraper group Brushing unit Phon (sound insulation) group

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING LINE, max. working width 2500 mm The line consists of the following machines: U06051) Motorized roller conveyor (infeed table) "HOMAG" model TBL 100/25/12/S U06052) 1st double-sided sizing and edge banding machine "HOMAG" model Profi KFL 525/8/A3/15 U06053) Rotation station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model Profi TDL 310/25/12 Nedpodg Itmofx Abbjkt U06054) 1st double-sided sizing and edge banding machine "HOMAG" model Profi KFL 526/9/A3/25

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (Half Line) max. working width 2500 mm, with automatic high-speed handling system: Nedpfxjrnrrbe Abbjkt A) DOUBLE-SIDED LOADING STATION (with 2 loading positions) BARGSTEDT TBH 270/D/25/12 B) TRANSFER TURNER (longitudinal/transverse), "HOMAG" TDL /310 /25 /12 C) Double-sided sizing and edge banding machine HOMAG Model KFL526/9/A3/25 D) TRANSFER TURNER (transverse/longitudinal), "HOMAG" TDL 510/25/12 E) DOUBLE-SIDED UNLOADING STATION (with 2 unloading positions) BARGSTEDT TSH 270/D/25/12 With LINE CONTROL - WOODLINE CONTROL PC52

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a machine line) Edge thickness in rolls (min/max): 0.4 / 3 mm Panel thickness (min/max): 14 / 60 mm Working width (min/max): approx. 260 / 3200 mm Control / Software: MAESTRO PRO EDGE Feed speed (adjustable): 10–40 m/min Safety and noise protection cabin + cam spacing (mm): 400 Panel processing (for each side): - Protection cutter (pre-milling) AS (1 x 4 kW) Nkedpfx Aswhi Slobbjt - Chipper unit DTR (2 x 8 kW) - Spray unit (for liquid anti-adhesive) AAR EDGE BANDING SECTION (for each side): - Radiator to heat workpiece edges - Gluing station (hot melt + pre-melter) - Pressure zone (CNC controlled) - Motorised edge magazine for rolls (2 positions) - End trimming unit YU/SP-750 (30 m/min) - Pre-milling unit RSP - Multi-profile milling unit (CNC controlled) RI/S 2P - Copy shaping unit (profile tracing) C1+C2 (4 x 0.35 kW) ED-SYSTEM and Fast-Release - Profile scraping unit RAS/S - Flat scraper unit RCA/2C - Spray unit (for polishing liquid) - Buffing unit SPE - Universal milling unit for grooving/rabbetting and profiling U (1 left + 1 right) 2 x 5.5 kW

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12 Nkjdpfxjdt Rgvo Abbet

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: O06027A) Infeed station with double pick-up station "BARGSTEDT" Model TBH 250/D/25/12 Njdpfewxvdcex Abbekt O06027B) 1st double-sided sizing and edge banding machine "HOMAG" Model KFL 525/6/A3/15 O06027C) L-shaped connecting roller conveyor "HOMAG" Model TWL 310 / 25 / 12 O06027D) 2nd double-sided sizing and edge banding machine "HOMAG" Model KFL 526/9/A3/25 O06027E) Connecting roller conveyor "HOMAG" Model TBL 100 / 25 / 25 O06027F) Transfer system (on rails) "HOMAG" Model TWL 120 / 30 / 02 SS O06027G) Transfer system (on rails) "HOMAG" Model TWL 120 / 34 / 02 S O06027H) Outfeed station with double storage station "BARGSTEDT" Model TSP 410/D/25/12

Stanje: rabljeno, številka stroja/vozila: 007641, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, PUR Edgebanding machine: Machine 1 Max. panel width: 1200 mm Working units, right side: 8 units Working units, left side: 9 units Nkedpewuz R Hefx Abbet

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness for coils (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control system: POWERCONTROL PC23 Power Touch / WoodCommander software Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin. Retractable stop dogs, spacing (mm): 1000 Side adjustment of aggregate carrier, manual mm 30 – 80: for manual adjustment of workpiece overhang for gluing and finishing section Nkjdpfov Rpdnsx Abbjt FORMAT PROCESSING (for each side): - Protection cutter (pre-milling) (1 x 4.5 kW) - Chipping unit KD 11 (2 x 6.6 kW) + vacant space EDGE BANDING SECTION (for each side): - Gluing unit (hotmelt glue + pre-melter) A3 + QA65 - Edgeband magazine for coils (slot No. 2) - Edge pressure zone (CNC-controlled) - Type A - End trimming unit PK30 (2 x 0.8 kW), feed speed 30 m/min - Pre-milling unit BF20 (2 x 0.55 kW) - Multi-function unit (radius and contour milling) FF30 + FF32 (4 x 0.4 kW) FlexTrim - Vacant space - Scraper unit PN 20 - Finishing unit (flat scraper + smoothing unit) FA 21. Sprayer unit (for polishing fluid) - No. 3 universal milling unit for grooving/rebating and profiling SF20 (3 x 6.6 kW) (CNC-controlled)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, 4-stranska FORMATIRNA in ROBNA LEPILNA LINIJA Dimenzije plošč: MIN. mm 195 x 250 x 60 / MAX. mm 1200 x 2500 x 60 Sestavljena iz naslednjih strojev: O12044a) Vhodna miza 'HOMAG' Mod. TBL 100/25/12/S z gnanim valji Nkjdpjx Aqbhofx Abbst O12044b) 1. Dvostranski formatni in robni lepilni stroj 'HOMAG' Mod. EDGETEQ D-610 (KFL 525/5/A3/15) O12044c) Obračalna postaja (90° vzdolžno-prečno) 'HOMAG' Mod. TDL 310 / 25 / 12 O12044d) 2. Dvostranski formatni in robni lepilni stroj 'HOMAG' Mod. EDGETEQ D-610 (KFL 526/6/A3/25)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Dvosmerni robni lepilni stroj Stefani Evolution C Letnik izdelave: 2012 Tehnično stanje: zelo dobro Stefani Evolution C je namenjen natančnemu lepljenju ravnih in profiliranih robov na pohištvenih ploščah iz različnih materialov, kot so iverne plošče, MDF ali vezane plošče. Zaradi naprednih funkcij in visoke kakovosti izdelave stroj zagotavlja odlične rezultate pri izdelavi pisarniškega, kuhinjskega, kopalniškega pohištva in drugih notranjih elementov. Maks. delovna širina: 3200 mm Min. delovna širina: 225 mm Upravljanje prek računalnika Programska oprema Stefani Winedge Plus v06.14.000 Nkedpfx Abju U N Agsbjt Vzdolžna obdelava Prečna obdelava

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (short line), max. working width 2500 mm, with automatic high-speed conveying system: O02006A) INFEED TABLE WITH ROLLER CONVEYORS "HOMAG" PROFI TBL100/30/12 O02006B)  ROTATION UNIT (longitudinal/transverse), "HOMAG" PROFI TDL/310/25/12 O02006C) Double-sided Sizing and Edge Banding Machine "HOMAG" Mod. PROFI KFL 526/10/A3/25 O02006D) ROTATION UNIT (transverse/longitudinal) "HOMAG" PROFI TDL 510/25/12 Nkjdpfx Aov D U Urebbet