OBDELAVA FORMATA IN STRUKTURE ZA OBREZOVANJE

HOMAG + BARGSTEDT KFL 526 + TBH + TSP

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: O06027A) Infeed station with double pick-up station "BARGSTEDT" Model TBH 250/D/25/12 O06027B) 1st double-sided sizing and edge banding machine "HOMAG" Model KFL 525/6/A3/15 O06027C) L-shaped connecting roller conveyor "HOMAG" Model TWL 310 / 25 / 12 O06027D) 2nd double-sided sizing and edge banding machine "HOMAG" Model KFL 526/9/A3/25 O06027E) Connecting roller conveyor "HOMAG" Model TBL 100 / 25 / 25 Ihedpowxvdcefx Af Tot O06027F) Transfer system (on rails) "HOMAG" Model TWL 120 / 30 / 02 SS O06027G) Transfer system (on rails) "HOMAG" Model TWL 120 / 34 / 02 S O06027H) Outfeed station with double storage station "BARGSTEDT" Model TSP 410/D/25/12

Stanje: rabljeno, SANDWICH PANEL PRODUCTION LINE FOR DOORS AND WALLS UP TO 610 MM WIDTH, manufactured by METECO This sandwich panel production line is designed to manufacture door and wall panels up to 610mm wide with an annual output capacity of 1,500,000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1,500,000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum reel weight: 10 Tons Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Top Sheet Processing Section - 10 T top decoiler with coil car - Roller and pinch pass - Upper coil steel frame - Polyethylene film applicator - Embossing machine for texture patterns - Press for decorative pattern - Upper roller former (12 stands) - Upper forming mill steel frame - Upper sheet guide 2. Bottom Sheet Processing Section - 10 T bottom double decoiler with coil cart - Polyethylene film applicator - Corona treatment machine - Embossing machine - Bottom roller forming machine (12 stands) Iedpfovtpciex Af Toht - Rolling conveyor - Entry line operator desk 3. Panel Formation Section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foam portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Discharge roller conveyor - Cutting saw - Soundproof cabin - Dust extraction unit - Operator control station 4. Stacking Section - Automatic panel tilting unit - Stacking conveyor - Outfeed conveyor - Packing section - Polystyrene spacer feeding system - Entry conveyor - Packing machine - Outfeed conveyor - Packing machine 5. Panel Production Equipment - Upper roller forming tools - Lower roller forming tools 6. List of Additional Machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Line speed: 12 m/min Thickness: 40-80 mm Maximum reel weight: 10 Tons Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1,500,000 m panel/year

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, delovna višina: 2.000 mm,

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), Letnik izdelave 2001 Širina traku 400 mm Zunanji premer 2.250 mm Dolžina transportnega traku 48 m Oprema • Sušilni stolp navzdol Ijdpfx Afod Ert Sj Tsht • Vhod zgoraj levo

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Complete plywood panel production line including: - 1 BUERKLE composing line (year 1991) with BUERKLE roller gluer (length 3400 mm) + 1 OLM longitudinal strand conveyor + 1 OLM cross strand conveyor + 1 assembly table. Iodpfx Ajul Uizsf Toht - 1 press loading rack with 10 positions. - 1 BVH 10-level hot press with thermic oil heated platens. - Platen size: 3700 x 1900 mm - Platen thickness: 40 mm - Opening between platens: 75 mm - 1 central hydraulic cylinder D700 mm, max. hydraulic pressure 315 kg/cm² - 1 press unloading rack with side ejection pushers on a lift table. Line currently in operation, available second half of 2025.

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, regularly serviced (last maintenance by Homag in 11/2024) Equipment and technical data: - Minimum workpiece thickness: 12 mm - Maximum workpiece thickness: 60 mm - Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) - Edge thickness min: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max: 3 mm (coil material) / 20 mm (strip material) - Feed speed: infinitely variable, 18–25 m/min (frequency controlled) - Adhesive type: EVA hot-melt glue - Glue application (pot / cartridge / nozzle): melting unit with granulate container - Glue capacity / cartridge size: granulate container, melting performance 18–35 kg/h, level regulated - Heat-up time: approx. 8–10 min - Edge magazine (slots): 2 rolls (automatic roll change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: cross-cutting unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: profile milling unit FK13, automatic 8-position tool changer (R = 2 mm) - Chamfer / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in finishing unit FA11 - Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW - Workpiece preheating: available - Release agent spray unit: top / bottom, type 2929 (F.01) - Extraction ports: several Ø 100 mm (individual extraction for each unit) - Control system: powerControl PC22 (industrial PC, woodCommander on Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant according to EC Directive 98/37/EC Ijdpfxswx Aaqs Af Toht Dimensions / Space required: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system shown in the pictures is not included in the scope of delivery! Availability: short-term Location: 63934 Röllbach

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 302827, Federhenn profilové obráběcí centrum (vrtání a frézování) SBZ 100G – PRODÁVÁ SE VE SPOJENÍ SE SCHIRMER NC PILOU 1000-G4 ROK 2014 (KOMPLETNÍ LINKA), VIZ INZERÁT SCHIRMER...!! Ihsdpjwnpa Njfx Af Tst NC-podavač s chapadlem, max. rychlost 200 m/min, maximální délka profilů 3500 mm. Chapadlo je možné pneumaticky nastavit ve 2 osách pro přizpůsobení různým geometriím profilů. Obráběcí stanice koncipována jako G-modul se 2 servopohony v ose Y a Z. Připraveno pro až 14 obráběcích jednotek pro kompletní zpracování PVC, rámových, sloupkových a rámových profilů – vykladač se stolem 2500 x 1500 mm. PC-řízení C 6140, displej, software SBZ 100G, PLC+NC. Modem pro vzdálenou diagnostiku. Nakládací magazín s 9 pozicemi (9 profilů, délka 3500 mm), určený pro rámové profily max. šířky 127 mm. Čtečka čárových kódů. Horizontální pásový dopravník s 9 transportními nosníky s plynulým nastavením. Výkon 18 m/min, rozměry 3000 x 2400 mm. Jednotky: šroubovací jednotka, 2x vrtací jednotka pro hmoždinky nebo sloupkové otvory, 2x vrtací jednotka pro montážní otvory (16 750 ot./min), 2x speciální úpravy (značení uzavírací části), vrtací jednotka pro kování vchodových dveří (otvíravé dovnitř), vrtací jednotka pro olive (3 stupně), frézovací jednotka pro zámkovou skříň. 2 ks frézovacích jednotek pro frézování a vrtání drenážních štěrbin a větracích otvorů, 1 ks pod úhlem. Otočné zařízení (MD a AD okenní systémy). Frézovací jednotka pro frézování PZ a otvorů pro kliku.

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 Iedpfx Afodt Rgvs Tsht VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12

Stanje: dober (rabljeno), UV curing oven for coating line Ijdot Ag Uqopfx Af Tjht

Leto izdelave: 2011, Stanje: dober (rabljeno),