Linija lepljenja formata in robov (4 strani)
HOMAG KFL 325 + KFL 326 + TBL + TDL

Name: HOMAG KFL 325 + KFL 326 + TBL + TDL
Brand: HOMAG
Availability: InStock

Stanje

Rabljeno

Lokacija

Italia

Linija lepljenja formata in robov (4 strani) HOMAG KFL 325 + KFL 326 + TBL + TDL

Podatki o stroju

Oznaka stroja:: Linija lepljenja formata in robov (4 strani)

Proizvajalec:: HOMAG

Model:: KFL 325 + KFL 326 + TBL + TDL

Stanje:: zelo dobro (rabljeno)

Cena in lokacija

Lokacija:: Italia

Pokliči

Podrobnosti ponudbe

ID oglasa:: A8044148

Referenčna številka:: K11043

Posodobitev:: nazadnje dne 06.02.2025

Opis

4-sided sizing and edge banding line
Panel dimensions: min. 195 x 250 x 60 mm / max. 1200 x 2500 x 60 mm
The line consists of the following machines:
Codpfxeiztxyj Afdsrd

KZ0400a) Infeed table "HOMAG" model TBL 100/25/12/S with motorized rollers
Feed speed (adjustable): 7–40 m/min

KZ0400b) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 325/M1/C
Feed speed (adjustable): 15–40 m/min with PC 22

SIZING UNIT: Twin hogger KD10 (2 x 6.6 kW) + gluing unit: A3 with dual roll magazine
EDGE BANDING SECTION: Top and bottom flush trimming units BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), grooving unit for rabbeting and grooving UF11 (4 kW), free position, profile scraping unit PN10, finishing unit (flat scraper + buffing unit)

KZ0400c) Rotating station (90° longitudinal-transverse) "HOMAG" model TDL 310 / 25 / 12 (for longitudinal to cross transfer)
Feed speed (adjustable): 20–60 m/min

KZ0400d) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 326/M2/C
Feed speed (adjustable): 15–32 m/min with PC 22

SIZING UNIT: Pre-milling cutter (1 x 4.5 kW), twin hogger KD10 (2 x 6.6 kW) + gluing unit: A3 with dual roll magazine
EDGE BANDING SECTION: End trimming unit HL 84 (2 x 0.22 kW), top and bottom flush trimming units BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), profile trimming/copying unit FF32 (4 x 0.4 kW), free position, profile scraping unit PN10, finishing unit (flat scraper + buffing unit)

MINIMUM EDGE LENGTH: 70 mm (For narrow workpieces: max. thickness 25 mm, max. edge thickness 2 mm, max. cycle rate 20 pcs/min, max. feed speed 20 m/min.)

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2008

192 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+39 0172 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

TISKALNA ZAVORA AMADA PROMECAM HFP NT 100-3

Essenbach

344 km

TISKALNA ZAVORA
AMADA PROMECAMHFP NT 100-3

59.999 €

VB plus DDV

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 15.996 h, vhodna napetost: 400 V, skupna masa: 6.750 kg, 1000 kN Max. stroke: 200 mm Weight: 6,750 kg Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours With manual angle measurement and correction system With safety laser UVV inspection carried out as scheduled / Maintenance always carried out regularly by Amada Accessories: Tool Die: 2 pcs UKB 20.478 V8/12 30° 835 mm 3 pcs UKB 20.344 V4/V7 88° 835 mm Tool Holder: 4 pcs UKB Substructure for Double V Die 20.287 + 60.919 835 mm Press Brakes: 5 pcs UKB 10.261 H100 R0.6/90° 2 pcs UKB 11.158 H80 R0.6/30° 2 pcs UKB 11.200 H66 R0.8/90° Crsdpfetwliwsx Afdod Miscellaneous: Light barrier requires repair (new price approx. €4,500) – included separately as a replacement (has already been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to businesses and without any warranty!

Poglej podrobnosti

Mali oglas

Mehanska stiskalnica Mossini 400 ton -98 Mossini PDM/2BX 400

Olofström

1.127 km

Mehanska stiskalnica Mossini 400 ton -98
MossiniPDM/2BX 400

62.000 €

EXW VB plus DDV

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 1995, številka stroja/vozila: 0540/98, Funkcionalnost: popolnoma funkcionalen, Proizvodna številka: 0540/98. Leto izdelave: 1998. Kapaciteta: 400 ton. Csdpsicbbzsfx Afdjrd Dolžina hoda: 300 mm. Število hodov: 10–40 / min. Nastavitev drsnika: 300 mm. Vgradna višina: 700 mm. Dimenzije mize: 1600 x 1300 mm. Neto teža: 45 ton. Odprtina portala: 1600 mm. Zunanje dimenzije: 2 x 3 x 6 metrov. Krmilni sistem: MEAB. Podajalnik / ravnalnik traku: iRON RNE 50B / 11. Odvijalec: iRON SA6000, maks. 700 mm.

Poglej podrobnosti

Mali oglas

Saerbeck

858 km

Obdelovalni center
WeekeBHX 500

45.000 €

Fiksna cena plus DDV

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Model: BHX 500 Year of Manufacture: 2008 Working Range X: 2,500 mm Working Range Y: 1,300 mm Working Range Z: 4 - 80 mm Number of Milling Units: 2 Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Cedpfx Afeh E Sghsderd Horizontal Drilling Spindles (X): 16 Horizontal Drilling Spindles (Y): 4 Grooving Saw: Swivels 90° X-Axis Speed: 130 m/min Y-Axis Speed: 80 m/min Z1-Axis Speed: 50 m/min Z2-Axis Speed: 27 m/min Spindle Speed: 18,000 rpm Dismantled - immediately available

Poglej podrobnosti

Mali oglas

LINIJO (4 STRANICI) velikosti & robu BANDING HOMAG + BARGSYEDT KFL 525 + KFL 526 + TBH + TSP

Roreto di Cherasco

584 km

LINIJO (4 STRANICI) velikosti & robu BANDING
HOMAG + BARGSYEDTKFL 525 + KFL 526 + TBH + TSP

Pokliči

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 Crjdpfxedt Rgvj Afdod VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12

Poglej podrobnosti

Mali oglas

Ekstruder Reifenhäuser PET Extrusion Line

Corse Lawn

1.411 km

Ekstruder
ReifenhäuserPET Extrusion Line

1.750.000 €

EXW Fiksna cena plus DDV

Pokliči

Leto izdelave: 2016, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Znamka: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Leto: 2016 Crsdpfsvbcbuex Afdsd Stanje: Odlično Uporaba: PET / PP / PS folija ali plošča PET: Območje debelin: 0,25 – 2,2 mm Izhodna zmogljivost: 2.000 kg/h Največja širina plošče: 1.600 mm Ekstruder: RZE 120 mm Električna napajana: 3 x 480V 60Hz z N Širina kalandrske valjev: 1.800 mm Premeri kalandrske valjev: 450 / 700 / 700 mm Silikonska kopel, največja širina plošče: 1.600 mm Silikonska kopel, območje debelin plošče: 0,15 – 1,5 mm Vključen štiripozicijski navijalec WOB 1800 za navijanje dvojnega traku. Vse informacije so lahko predmet sprememb in/ali napak. Vsa oprema je na voljo do prodaje ali do umika iz prodaje.

Poglej podrobnosti

Mali oglas

GM Gera ARCADE GEL 6 RV1-VL 362/110-30 stroj za čiščenje steklenic (2010) GM Gera Flaschenreinigungsmaschine

Menslage

891 km

GM Gera ARCADE GEL 6 RV1-VL 362/110-30 stroj za čiščenje steklenic (2010)
GM GeraFlaschenreinigungsmaschine

Pokliči

Stanje: rabljeno, Leto izdelave: 2010, Overview This bottle washing machine ARCADE GEL 6 was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and is being replaced due to an increase in production capacity. Technical Details Nominal capacity: 33,000 bottles/hour Adjustable range: 13,200 – 36,300 bottles/hour Chain pitch: 169 mm Cell pitch: 110 mm Bottle cells per row: 30 pcs Total bottle cells: 7,860 pcs Bottle cells, loaded: 7,680 pcs Consumption Compressed air: 1 m³ Steam (operation): 489 kg/h Steam (heating up): 4,430 kg/h Electrical power: 48.4 kW Water: 7.35 m³/h Tank volumes Pre-soak: 2,263 l Crjdpot Ul Exjfx Afdsd Caustic pre-rinse: 7,240 l Caustic tank 1: 31,755 l Caustic tank 2: 350 l Hot water tank 1: 350 l Hot water tank 2: 350 l Cold water tank: 350 l

Poglej podrobnosti

Mali oglas

NAKLADNI (OKVIRNI OKVIR) DVOJNI PRIKLJUČEK MEINERT (IMA Group) P 416 (D/B 3000/1300) Concept

Roreto

584 km

NAKLADNI (OKVIRNI OKVIR) DVOJNI PRIKLJUČEK
MEINERT (IMA Group)P 416 (D/B 3000/1300) Concept

Pokliči

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) Crodpfx Afofi Tg Hedjd No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Poglej podrobnosti

Mali oglas

Center za obdelavo palic Elumatec SBZ 151

Dugo Selo

103 km

Center za obdelavo palic
ElumatecSBZ 151

94.000 €

Fiksna cena plus DDV

Pokliči

Leto izdelave: 2007, obratovalne ure: 4.100 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj ni več potreben za našo proizvodnjo, zato je naprodaj. Stroj je v naši lasti od leta 2007 in je redno vzdrževan. Vse deluje normalno. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: Crodpfx Aewwtw Defdjd 5-osni stroj za obdelavo profilov Namenjen za fleksibilno in učinkovito obdelavo aluminija Avtonomno pozicioniranje sponk Maksimalna delovna dolžina: 9.300 mm 12 pnevmatskih sponk Magazin za orodje s kapaciteto 20 orodij in žagin list 500 mm Delovne ure vretena: 4100 h Dodatne tehnične specifikacije na zahtevo

Poglej podrobnosti

Mali oglas

Center za obdelavo profilov Elumatec SBZ 140

Dugo Selo

103 km

Center za obdelavo profilov
ElumatecSBZ 140

79.000 €

Fiksna cena plus DDV

Pokliči

Leto izdelave: 2016, obratovalne ure: 10.900 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj je v zelo dobrem stanju in popolnoma delujoč. Ne potrebujemo ga več, zato je naprodaj. Redno je bil vzdrževan. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Crsdpfx Aewwtylsfded Dodatne informacije: 4-osni center za obdelavo profilov Zasnovan za prilagodljivo in učinkovito obdelavo aluminija Avtonomno pozicioniranje primežev Največja delovna dolžina: 7.600 mm 8 pnevmatskih primežev Orodni magazin s kapaciteto za 8 orodij Delovne ure vretena: 5100 h Dodatne tehnične specifikacije so na voljo na zahtevo.

Poglej podrobnosti

Mali oglas

Zavorna stiskalnica EDWARDS PEARSON 100/3100

Kaunas

1.158 km

Zavorna stiskalnica
EDWARDS PEARSON100/3100

Pokliči

Stanje: rabljeno, Leto izdelave: 1997, The press brake was manufactured in 1997 in England at the EDWARDS PEARSON factory. The bending press is in good condition and is being sold complete with tooling. It has always been serviced and maintained on schedule. The machine is connected and can be demonstrated or inspected on site. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3,100 mm Bending force: 100 t Stroke: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Cedpfx Aorfx Utofdord Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1, Z2, R Tooling: Included Weight: 7 t Other: Newly replaced display, connected keyboard for easier operation. If you have any further questions, we will be happy to assist you.

Poglej podrobnosti

Oglašujte tukaj