Stroj za obojestransko lepljenje robov

HOMAG PROFI KF 20/09/QA/10

Stanje: zelo dobro (rabljeno), Storti RM 500 Edger - Made in Italy - Year of manufacture: 1993 - Electrically adjustable sawblade spacing TECHNICAL SPECIFICATIONS: - Maximum cutting width: 435 mm - Maximum cutting height: 170 mm - Motor power: 2 x 22 kW Lhedpfx Alok Talpe Njf - Maximum width of workpiece: 600 mm - Minimum workpiece length: 800 mm - Maximum blade diameter: 600 mm - Arbor diameter: 40 mm - Two upper feed rollers - One upper pressure roller - Roller drive motor power: 2 x 1.1 kW - Rollers with automatic pressure engagement - Seven lower toothed feed rollers - Electric adjustment of sawblades - Two lasers - Feed speed: 25 and 50 m/min - Infeed table: 2950 mm - Outfeed table: 3000 mm - Drive rollers diameter: 100 mm - Feed roller motor power: 2 x 1.5 kW Transport dimensions: 500 x 240 x 180 cm Weight: 3,500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Malo rabljeni kuvertirni stroj z naslednjimi konfiguracijami: - 2 podajalni postaji za nezgibane dokumente z veliko kapaciteto (325 listov) - 1 podajalna postaja za priloge z veliko kapaciteto (300 prilog) – OPCIJSKO - 1 podajalna postaja za kuverte (DIN Lang, C6/5 in C5 ter druge formate) - Funkcija dnevne pošte za do 5 listov - Omogočeno obdelovanje predolgih dokumentov - Dolžina papirja: 127–406 mm - Širina papirja: 127–229 mm - Formati kuvert: DIN Lang, C6/5, C5 oz. 88 x 220 do 164 x 242 mm - "Flip-Flop funkcija": Samodejni preklop, ko je dovajalni predal prazen - Samodejni nadzor dvojnega in manjkajočega vložka - Samodejna nastavitev dolžine zgiba (ni potrebe po odpiranju/nastavljanju) - Samodejna nastavitev višine naslovnega okenca - 4 načini zgibanja: enostavni, zavijalni, Z-zgib, dvojni paralelni zgib Lhedpfxeiyx Ixs Al Nsf - Shranjevanje do 20 programov - Velik zaslon z grafičnim in besedilnim prikazom - Do 8 listov/kuverto - Do 3.500 taktov/uro - Števec: 249.103 taktov

Stanje: rabljeno, številka stroja/vozila: 008365, Pozicija 1: Enostranski stroj za lepljenje robov BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Pozicija 2: Povratni transport za plošče BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Lsdpfox Swf Uex Al Nehf

Stanje: rabljeno, številka stroja/vozila: 006370, Type of applied edging: thin edge, thick edge Gluing system: EVA Joint milling: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Lhodpfxol Txw Ho Al Nsf Working units: 12 units

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) Lhedjgwbbqspfx Al Nsf No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: dober (rabljeno), Leto izdelave: 1973, Waste compactor container, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container - Stationary compactor for: roll-off containers - Feed chute: covered - Compaction process: hydraulic - Compaction process: automatic - Emergency stop switch: at the feed chute Lodpfxob A Ii Sj Al Nehf - Ram dimensions: 1450 x 650 mm - Ram stroke: 1100 mm - Transport dimensions: 2100 x 4500 mm - Side screw ratchets for roll-off containers - Function tested

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 Ledsd Nt Rqspfx Al Nohf FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X Lhodpfxox D H Hce Al Nof • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Stanje: novo, Leto izdelave: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Lsdpfsi Hplksx Al Njhf Vacuum pump displacement: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1100 mm Weight: 850 kg

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Lsdpfedh Tfgex Al Njhf Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space