Deckel Fp 3 Nc nakup rabljenega (682)

Leto izdelave: 1975, stanje: dober (rabljeno), Deckel FP3L with adjustable angle table, vertical milling head, SK 40 spindle taper, S20x2 thread. In good, operational condition. Can be demonstrated under power by appointment. Lrodpfxoildwxs Ahujn

Stanje: dober (rabljeno), Leto izdelave: 1980, Deckel FP3 orodjarska rezkalna stroj z 3-osnim Heidenhain digitalnim prikazovalnikom, togim mizo, vretenom SK 40, dodatki: različne napenjalne tule in držala rezk, nasprotni nosilec. V dobrem, takoj uporabnem stanju. Po dogovoru možno predstavitev pod napetostjo. Lrsdpfx Aexdr Uxshuon

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: Ledpfju Dm E Hex Ahuorn • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm • Infinitely variable feed rate on all 3 axes • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP3L with 3-axis K&C digital display, NEW, in very good condition Technical Data: Ledpsvn N Hdjfx Ahuorn - Year of manufacture: approx. 1975 Machine No. 0924 - Fixed angular table (clamping surface 1000 mm x 440 mm) - Spindle speed: 40 – 2000 rpm - Feed and rapid traverse on 3 axes - Feed: 10 to 500 mm/min - Rapid traverse: 1500 mm/min in all feed directions - Drive power: 2.2 kW - Travel X/Y/Z: 800/300/400 mm (Y-axis travel displacement additionally 200 mm) - Equipment: vertical & horizontal spindle - Extendable vertical quill and horizontal quill SK40 - Drawbar system S20x2 - Weight approx. 1900 kg Accessories and Features: - 3-axis K&C digital readout, newly installed, with manufacturer’s warranty and operating manual. Display unit: reference points, set zero points, input coordinates, mm/inch switch, absolute or incremental coordinates, circle functions, hole pattern, radius milling functions, etc. - Mechanical central lubrication - Operating manual - Hydraulic vice 160 mm - Rotary table Walter 500 mm About the Machine: Offered is a universal milling machine Deckel FP3L in very good condition. The vertical head can be shifted by 200 mm to allow for an even larger working area. A central pump ensures lubrication of the various axes. A unique feature of this machine type is its basic design: it is a machine with a slant bed table. The movement processes are allocated to the work spindle and thus to the tool. This results in high accuracy, as different workpiece weights have no effect on the axis movements. Mechanically and electrically tested. You are welcome to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture approx. 1975, machine no. 0681 >> Swiveling and tilting table (completely overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: vertical & horizontal spindle >> Extensible vertical and horizontal quill - SK-40 >> Drawbar system M16 >> Weight approx. 1300 kg Accessories and Equipment: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system Lrodpsxu E I Hjfx Ahujn >> Centralized lubrication About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are new. The swiveling and tilting table is as good as new. An oil change has been performed. The machine has been mechanically and electrically tested. The digital readout makes working easier and even more precise. Take the opportunity to inspect and test the Deckel FP3 under power on site. The machine is immediately available!!!

Leto izdelave: 1987, stanje: pripravljen za uporabo (rabljen), Na voljo je vertikalni rezkalni stroj Deckel FP4NC s krmiljem Heidenhain TNC 355. Letnik izdelave: 1987, vključno z omaro za orodje in raznim orodjem. Hodi osi X/Y/Z: 560mm/500mm/410mm, dimenzije X/Y/Z: cca 1800mm/1600mm/2000mm, teža: cca 2400kg. Ogled možen po dogovoru. Ledpfx Ajxyk Upshusrn

Stanje: rabljeno, Flat belt pulley, toothed pulley, multi-belt pulley -Spare part from: a Deckel machining center, type FP3A -Diameter: 80 mm Ledpfx Ahsffh Nzouorn -Bore: 28 mm -Dimensions: 80/80/H61 mm -Weight: 1.2 kg

Stanje: dober (rabljeno), Three-phase motor, electric motor, brake motor - Manufacturer: Siemens, electric motor type 1LC3113-4BB23 Z from a Deckel FP4L milling machine Lrodpfx Ahoul H Dwsuen - Power output: 4.0 kW - Speed: 1435 rpm - Mounting type: B14 - Protection rating: IP 44 - Brake: Disc brake type EK5dB24 - Dimensions: 575/270/H225 mm - Weight: 64 kg

Stanje: rabljeno, Rotary encoder, tachometer, encoder Lsdeffh N Aopfx Ahusrn - Spare part removed from: Deckel machining center, type FP3A - Quantity: 1 tachometer available - Price: per piece - Dimensions: 83 x 122 x H95 mm - Weight: 1.1 kg

Stanje: rabljeno, Motor power 3 kW Total power requirement 3 kW Weight 1,400 kg O F F E R We can offer you from stock, subject to prior sale and errors: DECKEL Universal Tool Milling Machine with FAGOR 3-axis Digital Readout Type FP 3 Year Serial No. Table travel: longitudinal, motorized / manual 490 / 500 mm vertical, motorized / manual 370 / 380 mm Transverse milling slide travel, motorized / manual 290 / 300 mm Fixed angle table 2230 420 x 800 mm Installation height under spindle 90 - 470 mm Spindle taper SK 40 18 spindle speeds 40 – 2,000 rpm 18 feed rates 10 – 500 mm/min Rapid traverse 1,500 mm/min Lredpjv Nq Skjfx Ahuen Spindle drive motor 3 kW Total drive 3 kW - 380 V - 50 Hz Weight 1,400 kg Accessories / Special features • FAGOR 3-axis digital readout V 300 (glass scales) with advanced functions such as chain dimensions, absolute dimension, mm/inch switching, etc. • Movable DECKEL universal vertical milling head, tiltable +/- 90° • Original DECKEL tool cabinet with extensive accessories such as various tool holders, collet chuck with approx. 20 collets, long arbor, various spacer rings, driving dogs, clamping devices, operating tools, etc. • DECKEL large, fixed angle table, 420 x 800 mm, mounted • DECKEL universal dividing head with direct and indirect indexing, various index plates • Additional manual DECKEL universal rotary table ? 380 mm with direct and indirect indexing, various index plates • Coolant equipment, chip tray, central lubrication, separate control cabinet, operating manuals Condition: Very well-maintained condition! Ideal machine for training workshops or small batch production! Please click here for a video of the machine: FP3/4 Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net - upon receipt of invoice We always have a wide selection of conventional and CNC milling machines in stock. Please contact us!

Stanje: dober (rabljeno), Leto izdelave: 1982, x-premik 300 mm y-premik 160 mm z-premik 340 mm Nosilec orodja SK40 Število vrtljajev 40–2000 1/min Krmiljenje Aktiv HEIDENHAIN Velikost mize 600 x 210 mm Skupna potrebna moč 2 kW Teža stroja pribl. 0,73 t Potreben prostor pribl. D׊×V 1,20x1,10x1,60 m Iz tehnične šole Lrjdozfql Sepfx Ahusn - Avtomatski podajalnik v oseh X in Z, os Y - Naprava za hlajenje - Primež - Delovna svetilka

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Interna številka artikla: 26071 Lodpfx Ajzd Thmohusrn Univerzalni rezkalni stroj Deckel FP1 + digitalni prikaz Heidenhain Pomiki: X300 / Y160 / Z340 mm Izvlek pinole: 60 mm Priključna moč: 1,9 kW Število hitrosti vretena: 16 Območje vrtljajev: 40-2000 obr/min Orodno vreteno: SK40 Stroj prihaja iz izobraževalne ustanove in je dobro vzdrževan. Stroj si lahko ogledate pod napetostjo na več kot 500 m² ogrevane skladiščne površine.

Stanje: zelo dobro (rabljeno), NETO CENA 9.500 € DECKEL univerzalni rezkalni stroj FP 1 št. 2101 z HEIDENHAIN 2-osnim digitalnim prikazovalnikom Pomiki osi: X/Y/Z: 300 x 160 x 340 mm Ročna nastavitev ročice rezkalne glave: 100 mm Povečanje delovnega območja na: 300 x 260 mm Hitrost vretena: vertikalno/horizontalno: 40 – 2.000 min⁻¹ Število stopenj menjalnika: 16 Stožčasti spoj vretena: SK 40 Vlečna palica orodja: S20 x 2 (Deckel standard) Hod pinole: 60 mm Pomik X/Z-os: 5 – 500 mm/min Regulacija pomika: brezstopenjsko Hitri pomik X/Z-os: 1.200 mm/min Pomik Y-osi: ročno Fiksna kotna miza: 600 x 210 mm Navpična glava vrtljiva: +/- 90° Teža: 710 kg Dimenzije (pribl.): 1.250 x 1.200 x 1.850 mm Tehnični podatki niso zavezujoči! Značilnosti: Za horizontalno obdelavo se rezkalna glava zavrti za 90 stopinj in pomakne nazaj. Lsdpfx Ahexyc N Eousrn 2-osi natančen digitalni prikazovalnik HEIDENHAIN POSITIP VRZ 719 Brezstopenjski pomik na X/Z-osi Stroj je bil pred nekaj leti deloma obnovljen pri strokovnem servisu. Oprema: 2-osni digitalni prikazovalnik HEIDENHAIN Fiksna kotna miza Kad za odrezke Strojna svetilka Nastavljive noge stroja Dodatna oprema po dogovoru! Stanje: dobro do zelo dobro iz izobraževalnega obrata. Vračanje vretena: X 0,05 mm Y 0,15 mm Z 0,2 mm Novi stroji tedensko Naročite se na profil in ničesar ne zamudite

Stanje: delavnici obnovljeno (rabljeno), Orodjarska rezkalna stroj: Deckel Tip: FP 2 Stanje: Geometrično obnovljena, rabljena Leto izdelave: 1980. leta, geometrijska obnova 2026 Tehnični podatki: Ledpfozcdarjx Ahuorn Pomiki X/Y/Z, pribl.: 400 / 200 / 400 mm Vpenjalo za orodje: S20 Obrati: (18) 40 - 2000 min-1 Pomiki: (18) 8 - 400 mm/min Nagibna glava: 180° Oprema: - Nova 3-osna digitalna merilna naprava - Nova zaščita vretena z končnim stikalom - Nova strojna razsvetljava - Horizontalno in vertikalno vreteno - Fiksna kotna miza - Naprava za hlajenje - Posoda za ostružke

Stanje: rabljeno, Tehnični podatki Številka artikla M100001418 Ledpfxjzfpice Ahusrn Upravljanje: CNC brez mehanskih ročnih koles Krmiljenje: CNC tirno krmiljenje DECKEL Contour 3 Hitrost vrtenja: 63 - 3150 min⁻¹ Podajalna hitrost: 2-3000 mm/min, brezstopenjsko nastavljiva Hitri pomik: 3000 mm/min Moč: 4,4 kW Vretenski tulec: Izvlečni vertikalni tulec 80 mm SK40 z vpenjalnim sistemom DIN 2080 ali DIN 69872 Osi: X/Y/Z 485/385/380 mm Kotna miza: Fiksna kotna miza 800 x 460 mm, max. obremenitev 400 kg Hidromehanski vpenjalni sistem SK40 z zateznim vijakom po DIN 2080 ali DIN 69872 Vertikalno in horizontalno vreteno Rezkalna glava ročno vrtljiva +/- 90° Programiranje: Deckel Contour 3 – dialogno vodeno programiranje z različnimi obdelovalnimi cikli.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Rezkalni stroj Lodpfxsy Awz Rs Ahujrn Deckel FP 4 M 3-osni digitalni prikazovalnik Heidenhain Delovno območje: 500 x 400 x 400 mm Pogonska moč: 4 kW Fiksna miza 800 x 460 mm Posoda za odrezke Vpenjališče vretena SK 40 Območje vrtljajev: 50–2500/min Pomiki: 8–630 mm/min Hitri pomik: 1,3 m/min Potrebni prostor cca 2 x 2 x 2 m Teža cca 1650 kg

Stanje: dober (rabljeno), Leto izdelave: 1995, 1 rabljeni univerzalni rezkalni stroj Proizvajalec: Deckel Maho Tip: FP 1 Letnik: 1995 s CE certifikatom Z aktivnim digitalnim prikazovalnikom Heidenhain TNC 123 Ljdpfjzamw Ijx Ahusrn Tehnični podatki: X-pomik: 300 mm Y-pomik: 160 mm Z-pomik: 340 mm Vpenjalno držalo: SK 40 Velikost mize: 600x210 mm Obrati vretena: 40-2000 min⁻¹ Teža stroja ca.: 1 t Potrebna površina ca.: 1,6x1,3x1,8 m

Stanje: dober (rabljeno), 1 used universal tool milling machine Make: Deckel Ledorn I Rzspfx Ahuern Model: FP 1 Year of manufacture: 1982 Technical specifications: X-axis travel: 300 mm Y-axis travel: 160 mm Z-axis travel: 340 mm Spindle taper: SK 40 Table size: 600 x 210 mm Spindle speeds: 40–2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6 x 1.3 x 1.8 m

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: 2204 - 0469, x-travel: 580 mm y-travel: 400 mm z-travel: 450 (390*) mm Table size: 460 x 800 mm Spindle speed range: 40 - 4000 rpm Feed range: 2 - 3600 mm/min Rapid traverse: 4.0 m/min Spindle taper: SK 40 Space requirement approx.: 3.0 x 2.10 x 2.10 m Spindle drive: 4.0 kW Control: Contour 2 Lodpecxxwasfx Ahusrn CNC-controlled universal milling machine with Contour 2 control, swiveling vertical head +/- 90° with 80 mm quill stroke, horizontal spindle, automatic feeds and rapid traverse in 3 axes, hydraulic tool clamping, pendant control panel, electronic handwheel, automatic central lubrication, coolant system, emergency stop, chip tray, separate control cabinet. The machine is in good condition.

Stanje: rabljeno, Leto izdelave: 1986, številka stroja/vozila: 2204-0929, x-travel: 560 mm y-travel: 500 mm z-travel: 450 / 390 mm Quill stroke: 80 mm Feed rate: 2 - 3600 mm/min Table clamping area: 800 x 460 mm Spindle speeds: 40 - 4000 rpm Spindle taper ISO: ST40 Swivel head left and right: +/- 90° Control: Contour 2 Total power requirement: 4.0 kW Machine weight approx.: 2.8 t Space required approx.: 2.0 x 2.5 x 2.2 m CNC-controlled universal milling machine with Contour 2 control system, vertical head swivels +/- 90° with 80 mm quill stroke, horizontal spindle, feeds and rapid traverses on 3 axes, hydraulic tool clamping, pendant control panel, machine lighting, automatic central lubrication, coolant device, emergency stop, chip tray, separate control cabinet. The machine is in good condition. Lsdpecxxriofx Ahuorn

Stanje: rabljeno, številka stroja/vozila: 2819-0517, x-axis travel: 300 mm y-axis travel: 300 mm Ljdpfx Ahocxxp Tsuorn z-axis travel: 400 mm (340 mm with apron) Clamping surface: 390 x 620 mm / chip tray Spindle speed: 40–2500 rpm Feed range: 0.2–3600 mm/min Rapid traverse: 4.0 m/min Control: Contour 3 – 3D Path Control System Spindle taper: SK40 Quill stroke: 60 mm Swiveling head +/-: 90° Spindle drive motor: 2.0 kW Total power requirement: 1.6 / 2.0 kW Machine weight approx.: 1.3 t Space requirement approx.: 1.8 x 1.8 x 1.8 m Universal milling machines from Deckel have proven themselves for decades in mold, tool, and machine construction. CNC-controlled tool milling machine with Contour 3 control, vertical head swivels +/- 90° with 60 mm quill stroke, horizontal spindle, feeds and rapid traverse on 3 axes, hydraulic tool clamping, automatic central lubrication, coolant system, emergency stop button, chip guard enclosure with chip tray, separate control cabinet. The machine is in good condition.

Stanje: rabljeno, številka stroja/vozila: 0736, x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm Work table: 1000 x 440 mm Spindle speeds: 40 - 2000 RPM Number of speed steps: 18 Feed range: 10-500 mm/min Number of feed steps: 18 Rapid traverse: 1.50 m/min Spindle taper: SK40 Total power requirement: 2.2 kW Machine weight approx.: 2 t Space requirement approx.: 1.57 x 1.68 x 1.85 m Universal tool milling machine in traveling column design, suitable for particularly heavy and large workpieces. Equipped with a swiveling vertical head and quill (stroke 85 mm), horizontal spindle with quill (stroke 120 mm), inclined bed with fixed, precise angle table, automatic feeds on 3 axes, chip tray, coolant pump and system, separate control cabinet. The machine is in good condition. Ledocxxyhopfx Ahusrn

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Deckel FP 1, Letnik pribl. 1983 / Generalno obnovljen pri podjetju Arnold pribl. 2012 3-osni digitalni prikaz, Pomik X/Y/Z 400/150/340 mm, Lodpfx Ahezfglhjuern Velikost mize 600 x 210 mm, T-utori: 4 Širina T-utora: 12 mm Vrtljaji vretena: 20 - 2000 obr/min Stopnje hitrosti delovnega vretena: 12 Stopnje pomika: 10 Vpenjalni stožec vretena: MK 4 Vertikalni pomik pinole: 60 mm Teža stroja pribl.: 0,8 t

Stanje: dober (rabljeno), Leto izdelave: 1995, Universal tool milling machine Deckel FP 1 – several machines available, see pictures Model: FP 1 3-AXIS Heidenhain digital readout Price: from €9,500 excl. VAT Technical data: X-travel: 300 mm Y-travel: 150 mm Z-travel: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T-slot width: 12 mm Spindle speed range (vertical): 250 – 2000 rpm Spindle speed range (horizontal): 40 – 315 rpm Working spindle speed steps: 8 Feed range: 10 – 500 mm/min Feed steps: 8 Quill stroke: 60 mm Spindle taper: SK 40 Dimensions/Weight: 1235 x 1160 x 1800 mm / approx. 800 kg Lrsdpfxotdcfhe Ahusn

Stanje: rabljeno, x-pomik 500 mm y-pomik 200 mm z-pomik 400 mm Ledpfx Ahjx Hay Dsusrn Vpenjalna površina mize 700 x 300 mm Vpenjanje orodja SK 40 - S20 Pomik 8 - 400 mm/min Hitri pomik v X in Z 1200 mm/min Število vrtljajev 40 - 2000 obr/min Skupna potrebna moč 2,2 kW Teža stroja ca. 1400 kg Potrebna površina ca. 1500 x 1200 x 1600 mm Vključno z 2-osnim digitalnim prikazom Heidenhain