Deckel Fp 3 Nc nakup rabljenega (688)

Stanje: rabljeno, Krmiljenje Dialog 4 Kdjdpfx Aoyyqp Ajbxsn X-hod 400 mm Y-hod 315 mm Z-hod 400 mm Vrtljaji vretena 3.150 o/min Po naši oceni je stroj v dobrem rabljenem stanju in ga je mogoče ogledati pod napetostjo po predhodnem dogovoru. Pribor, prikazana orodja in vpenjalna sredstva so del dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter predhodne prodaje!

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Control: Deckel Dialog 11, equipped with a vise, inspection is possible. Kjdpfx Abjqi D S Uexedn

Stanje: rabljeno, številka stroja/vozila: 2810 - 4271, x-travel: 500 mm y-travel: 400 mm z-travel: 450 (390) mm Table surface: 710 x 430 mm Maximum spindle speed: 40 - 4000 rpm Feed range: 10–2000 mm/min Kedeh Ra Izopfx Abxsdn Rapid traverse: 4.0 m/min Spindle drive motor: 4.0 kW Tool holder: SK40 Control system: CNC Contour 3 Drive power: 9 kW Machine weight approx.: 2 t Space requirement approx.: 2.4 x 2.3 x 2.3 m Universal CNC tool milling machine with Contour 3 control, prepared for fourth axis, infinitely variable spindle speeds and feed rates, vertically swiveling milling head (+/-130°), rigid angle table, 20-position tool changer, hydraulic tool clamp, automatic central lubrication, overhead control panel with detachable handwheel, coolant/lubricant unit with separate coolant tank, splash guard enclosure with work area lighting, separate control cabinet with main safety switch, emergency stop on control panel, chip and tool change station, compact design, machine in good condition.

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Universal milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control system: Deckel Dialog Control 4: - 3D path control, including drilling and milling cycles - Monitor, electric hand-held control panel - Terminal for program input and output Technical data: Travel range X/Y/Z: 300 x 220 x 400 mm Speed: 31.5 – 3,150 rpm with 21 gear steps Feed rate: 4–2,000 mm/min Kjdpfjwid Spox Abxsdn Rapid traverse: 4 m/min Drive power: 1.6–2.0 kW Tool holder: SK 40 Hydraulic tool clamping Universal milling table with digital readout: - Clamping surface: 600 mm x 320 mm - Table load: 180 kg - C-axis rotation: 360° - A-axis tilt: 15°/45° - B-axis swivel: +/- 45° Vertical milling head: - Quill travel by hand – horizontal 65 mm, vertical 60 mm Additional equipment: - Manual machine handwheels with scale - Direct travel measurement of NC axes - Coolant system Special accessories: - Approx. 33 tool holders (without tools) – see photo - High-speed milling spindle Machine data: - Machine weight approx. 1,380 kg - Required space incl. ancillary components: L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm - Power connection: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected under power and cutting operation by appointment.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 580 mm, pomik osi Y: 400 mm, pomik po osi Z: 450 mm, največja hitrost vrtenja: 4.000 obr/min, model krmilnika: Contour 1, NC milling machine Deckel FP4A We are selling a perfectly preserved Deckel FP4A milling machine (very few working hours and in perfect condition like new)! Details x-way 580mm y-way 400mm z-way 450 (390*) mm Table size 460x800mm Spindle speed range 40 - 4000 rpm feed range 2 - 3600 mm/min feed 4.0 m/min Spindle mount SK 40 Space requirement approx. 3.0 x 2.10 x 2.10 m Spindle drive 4.0kW steering Contour 1 Kdjdpfx Abjxzpwfsxjn Description CNC-controlled tool milling machine with Contour 2 control, vertical head rotatable +/- 90° with quill stroke 80mm, horizontal spindle, feeds & rapid feeds in 3 axes, hydraulic tool clamping, flying desk, electronic handwheel, automatic central lubrication, coolant device, safety emergency stop, chip tray, separate Switch cabinet. The machine is in good condition. this extra information is standard for this model. Please always double-check the details during a visit The DECKEL FP 4 A Universal Tool Milling Machine, originating from 1985, is a classic and versatile metalworking machine celebrated for its precision and adaptability. This model is a testament to Deckel's commitment to quality engineering. The FP 4 A features a sturdy bed-type structure, providing the essential stability for precision milling operations. The universal tool milling head is a standout feature, allowing operators to perform a wide range of tasks, from basic drilling to intricate contouring and profiling. This adaptability makes it invaluable in industries like tool and die manufacturing and mold production. Key technical specifications of the 1985 DECKEL FP 4 A include a spacious worktable, variable spindle speed control, and an intuitive interface for efficient programming and operation. The machine is also known for its advanced control technology, which enhances precision and user-friendliness. Despite its age, the DECKEL FP 4 A remains a trusted choice for industries requiring versatile tool milling capabilities. Its reputation for durability and precision endures, making it an essential tool in modern metalworking and manufacturing facilities, demonstrating Deckel's enduring commitment to quality and innovation in the field of metal machining.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 380 mm, pomik po osi Z: 380 mm, skupna višina: 2.380 mm, skupna dolžina: 1.450 mm, skupna širina: 17.600 mm, skupna masa: 3.500 kg, dolžina mize: 800 mm, širina mize: 480 mm, največja hitrost vretena: 8.000 obr/min, hitrost vretena (min.): 20 obr/min, For sale: A DMU brand machining center, model 50 V A new spindle was installed recently. Kdjdpsrdf Ebsfx Abxen The machine is in excellent condition and fully operational; machining in the hundredth-millimeter range is possible without any issues. Technical Data: Brand: GRUNDIG Model: MillPlus Spindle speed range: 20 – 8000 RPM Number of axes: 3 X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 380 mm Table length (external): 800 mm Table width (external): 480 mm Spindle taper: SK40 Dimensions (L*W*H): 2450*1760*2380 mm Weight: 3500 kg Upon request and for an additional charge, loading and transport can be organized throughout Europe. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery Trading – Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE Are you looking for a high-quality but affordable metalworking machine for your production needs? Or do you wish to sell your machine? For further information or contact options, please visit our website.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2836-0192, Stroj v dobrem rabljenem stanju, Kdjdpfeylawxox Abxon Krmiljenje Dialog 11 Do pred kratkim je bil redko v uporabi v lastni delavnici. Dokumentacija/priročniki itd. so na voljo. Dodatna oprema, rezkarji, ničelne sonde itd. se lahko dokupi opcijsko.

Stanje: kot nova (razstavni stroj), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2801 002016, potovalna razdalja osi X: 300 mm, pomik osi Y: 300 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 6.300 obr/min, hitrost vretena (min.): 31 obr/min, poteza s peresom: 80 mm, hitro pomikanje X-os: 4 m/min, hitri pomik os Y: 4 m/min, hitri pomik na osi Z: 4 m/min, širina mize: 620 mm, dolžina mize: 390 mm, obremenitev mize: 250 kg, skupna masa: 1.700 kg, potrebna širina: 1.800 mm, zahteva za prostor dolžina: 1.400 mm, potrebna višina: 1.800 mm, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, The machine is very sturdy and robust in terms of its design and construction. Its excellent accessibility makes it extremely user-friendly. The machine can also be moved using mechanical handwheels. CNC Path Control DECKEL Dialog 4 Easily programmable 3D path control with colored graphical support, dialog-based cycle input, contour path calculator, editor functions, clear program and tool management, parallel programming possible. Travel distances X / Y / Z: 300 / 300 / 400 mm Tool holder: SK40 DIN 69872 Clamping system: Hydromechanical clamping system SK40 with drawbar according to DIN 2080 or DIN 69872 Working spindle: vertical and horizontal. Manually extendable quill: 80 mm vertical and 65 mm horizontal, both manually extendable. Milling head: manually swiveling +/- 90° Ksdpoywhvhofx Abxedn Speed range: 31.5-6300 rpm, geometric stepped direct gearbox for maximum torque / milling performance at the working spindle. Direct gearbox for maximum torque / milling performance at the working spindle Feed rate: 2 - 3600 mm/min, infinitely variable feed rate Rapid traverse: 4000 mm/min Universal table: 620 x 390 mm, max. load capacity 450 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis K&C Digital Readout (new) and stepless feed on 3 axes – Excellent Condition Technical Data: >> Year of manufacture: 1983 Machine No.: 2102-2444 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight: approx. 800 kg Accessories and Equipment: Kdsdpfxotwlwzj Abxjn >> 3-axis digital readout (K+C) newly installed, manufacturer’s warranty and manual included. Display features: set reference points, zero points, enter coordinates, mm/inch conversion, absolute/incremental coordinates, circle functions, hole array, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts list About the Machine: Offered is a universal milling machine Deckel FP1, built in 1983, in excellent condition. The machine has very little backlash, and all leadscrews move smoothly. Even at maximum speed, the milling machine runs quietly. On this newer FP1 model, the feed is continuously variable on all three axes, plus rapid traverse is available in all axes. The FP1 was located in a training workshop and used only occasionally. The oil has been changed. Mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test this gem on site under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout K&C (new) and 3 stepless feed drives – Excellent Condition Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2867 >> Swivel-tilt rotary table (newly planed) >> Speed range: 40 – 2000 rpm >> Stepless feed drive in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quills – SK40 taper >> Drawbar system M16 >> Weight approx. 800 kg Equipment and Accessories: >> 3-axis digital readout K+C, newly installed with manufacturer's warranty and operating manual. Kdedpfx Abot Aarpjxsn Readout features: setting reference points, zero points, coordinate input, mm/inch switching, absolute or incremental coordinates, circle functions, hole arrays, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a Deckel FP1 universal milling machine, year 1985, in outstanding condition. The machine has minimal handwheel backlash and all spindles move smoothly. Even at maximum spindle speeds, the machine runs very quietly. On this newer FP1 model, feed drive is steplessly adjustable on all three axes, and rapid traverse is also available. The oil has been changed. Machine has been mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power onsite.

Stanje: dober (rabljeno), Offertă o mașină de frezat universală DECKEL FP1 aktiv, parțial recondiționată, cu afișaj digital Heidenhain pe 3 axe TNC 113 și masă rotativă divizor cu mandrină cu trei bacuri. Kdjdjxmggujpfx Abxen Construcția compactă o face ideală pentru ateliere hobby mai mici sau garaje. Producător: DECKEL Tip: FP1 Nr. de serie: 2102-3314 - Cursă de lucru X/Y/Z: 300x160x340 mm - Turație arbore principal: 40–2000 rpm - Avans continuu pe toate cele trei axe - Avans rapid pe toate cele trei axe - Cap de frezat vertical - Reglare verticală 100 mm - Dispozitiv de frezare orizontală - Afișaj digital Heidenhain 3 axe TNC113 - Sistem de răcire - Masă rotativă divizor cu mandrină 3 bacuri Putere totală instalată: 1,9 kW Dimensiunile utilajului L x l x h: 1,30 x 1,10 x 1,60 m Greutate: aprox. 850 kg Prețul este net, ex works, încărcare inclusă. Stare: folosită.

Stanje: rabljeno, Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, x-slag 710 mm y-slag 600 mm z-slag 500 mm NC-draaitafel 630 mm Spilopname SK 40 Spilsnelheden 18 - 6300 rpm DIALOG 4 besturing Voedingssnelheid 2 - 3600 mm/min Snelle traverse 6 m/min Maximale tafelbelasting 485 kg Zwenkslag 80 mm Spindelmotor 9,5 kW Totaal benodigd vermogen 20 kVA Machinegewicht ca. 4,6 ton Afmetingen (L x B x H) 3,8 x 2,24 x 2,35 m Kedpfx Ajwu Dfmobxjdn Accessoires: LNS Fox ws 2-1500 filtersysteem met 2 nieuwe filters in doos, 2 kasten vol gereedschap Deze machine is bij ons in opslag.

Stanje: rabljeno,

Stanje: dober (rabljeno), Interna št. artikla: 25110 Univerzalni rezkalni stroj Deckel FP3 Kdjdpfx Abeyb Su Uexen Št. stroja: 2482 + 3-osni digitalni prikaz + Zaščitni pokrov s stikalom (UVV) + Strojna svetilka + Razni SK40 držala orodij in set vpenjalnih tulec (S20x2) Rezkalna miza: 800 x 420 mm Vpenjalo vretena: SK40 Najv. hitrost: 2000 min⁻¹ Pogonska moč: 3 kW Pomiki X/Y/Z: 500/300/400 mm Mere (D׊×V): 1400 x 1500 x 1800 mm Teža: ca. 1500 kg Stroj je popolnoma delujoč in si ga je mogoče po dogovoru ogledati pod napetostjo v ogrevanem skladiščnem prostoru nad 500 m².

Stanje: dober (rabljeno), Leto izdelave: 1986, potovalna razdalja osi X: 710 mm, pomik osi Y: 600 mm, pomik po osi Z: 455 mm, x-pomik 710 mm y-pomik 600 mm z-pomik 455 mm Krmilnik Dialog 4 Število obratov 6300 min⁻¹ Kdedpfozd A U Ajx Abxsn Vpenjalno mesto SK40 Hod pinole 80 mm Velikost mize 550 x 1000 mm Obremenitev mize 0,6 t Skupna potrebna moč kW Teža stroja pribl. 4 t

Stanje: rabljeno, številka stroja/vozila: 2820-0419, x-axis travel: 500 mm y-axis travel: 400 mm z-axis travel: 400 (340) mm Table size: 710 x 430 mm Spindle speed range: 40 – 4,000 rpm Feed rate range: 2 – 3,600 mm/min Rapid traverse: 4.0 m/min Swivelling head +/-: 90° Quill stroke: 80 mm Spindle taper: SK 40 Control: Contour 3 Kdodjh Ra Nispfx Abxen Total power requirement: 5.5 kW Machine weight approx.: 1,900 kg Space requirement approx.: 2 x 1.4 x 1.8 m CNC-controlled universal milling machine with Dialog 4 control, vertical head swivels +/- 90° with 80 mm quill stroke, feeds and rapid traverses on 3 axes, hydraulic tool clamping, automatic central lubrication, coolant system, emergency stop, machine lighting, chip splash guard enclosure with chip tray, pendant control panel and electronic handwheel. The machine is in good condition.

Stanje: rabljeno, številka stroja/vozila: 1621, x-axis travel: 800 mm y-axis travel: 300 mm z-axis travel: 400 mm Table size: 1000 x 440 mm Tool holder spindle taper: SK40 Spindle speeds (belt pulley): 40 - 2000 rpm Number of main spindle speed steps: 18 Maximum spindle speed: (6000 possible by changing the belt) rpm Feed rate range: 10 - 500 mm/min Number of feed speed steps: 18 Total power requirement: 3 kW Machine weight approx.: 2.1 t Space requirement approx.: 1600x1550x1930 mm Ksdpfx Ash Ra Nqobxsdn Universal tool milling machine in travelling column bed design for machining heavy workpieces, featuring a 3-axis rotating and swivelling work table, feeds and rapid traverse on all 3 axes, both vertical and horizontal quills with high-speed head, maximum speeds of 1900/2350/3000/3750/4750/6000 rpm adjustable via belt preselection, coolant pump, universal clamping table equipped with 6 T-slots, each 16 mm x 7. Separate control cabinet without main machine switch.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2201-5046, Dobro stanje z različnimi držali orodij. SK40 - S20 Heidenhain Aktivsteuerung upravljanje Avtomatski pomiki na vseh oseh. 4. os je krmiljena. Kdjdpfx Ajy Al Tnebxon

Stanje: rabljeno, Leto izdelave: 1982, Vpenjalno vreteno ISO. x-hod . mm y-hod . mm z-hod . mm Krmiljenje Dialog Tip Sistem 2 mm Tehnični podatki so podatki proizvajalca oziroma upravljavca in zato za nas neobvezujoči. Pridržujemo si pravico do vmesne prodaje; veljajo izključno naši poslovni in prodajni pogoji. O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnih površin, kapaciteta žerjava 70 t Kedpfx Ajzdcbqebxodn več kot 10.000 artiklov dodatne opreme za vašo delavnico Želite prodati stroje, proizvodne linije ali svoje podjetje? Kontaktirajte nas. Dodatne ponudbe najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Ekipa Markus Hirsch

Stanje: pripravljen za uporabo (rabljen), CNC rezkalni stroj, Deckel FP4NC, rabljeni stroj Proizvajalec: Deckel Model: FP4NC Serijska številka: 31549 Pomik po oseh: X-os: 560 mm Y-os: 500 mm Z-os: 450 mm Specifikacije mize: Dolžina: 900 mm Širina: 530 mm Največja nosilnost: 450 kg Pomiki podajal: X-os: 3600 mm/min Y-os: 3600 mm/min Z-os: 3600 mm/min Specifikacije vretena: Stožec vretena: ISO 40 / BT / MK Moč vretena: 7,5 kW Kodpfx Ajwrdu Aebxedn Največje število obratov: 5000 1/min

Stanje: pripravljen za uporabo (rabljen), Deckel Maho 2238-4630 rotacijska miza SN: 0174 za stroj FP4-60 – premer: 63 cm / višina: 43 cm, rabljeno, običajni znaki uporabe, 100% delujoče, obseg dobave po fotografijah POZOR: Stroški pakiranja in pošiljanja prosimo povprašajte posebej! Kodpfx Absy Np Najxjdn

Stanje: pripravljen za uporabo (rabljen), Deckel Maho 27073757 / a touch panel for Deckel Maho CNC 432 control unit, serial number as shown in the photo, used, normal signs of wear, 100% fully functional, scope of delivery as per photos Kjdpfx Asi D Upcobxedn

Stanje: pripravljen za uporabo (rabljen), Deckel Maho 5100027000 touch panel for Deckel Maho CNC 432 control, serial no. as per photo, used, normal signs of wear, 100% fully functional, scope of delivery as shown in photos. Kdsdpfoi D Upgsx Abxen

Stanje: rabljeno, Technical details: X-axis travel: 600 mm Y-axis travel: 300 mm Z-axis travel: 360 mm Speed range, max horizontal: 40–2000 rpm Kjdpfxeu U E T Ie Abxodn Spindle taper (vertical/horizontal): SK 40/SK 40 Speed range (max permissible): 40–2000 rpm Feed rate: 2–3600 mm/min Quill travel: 80 mm Table size: 810 x 420 mm Total power requirement: 3 kVA Machine weight approx.: 1300 kg Machine dimensions approx. (LxWxH): 1.8 x 1.35 x 1.95 m Milling machine with shaping head Stroke length: 32–80 mm, with 10 double strokes, 24–285 strokes/min Heidenhain 3-axis digital readout *

Stanje: rabljeno, številka stroja/vozila: 2055, do 2000 vrt./min, velikost mize z T-utorom 1000 mm x 400 mm, s 3-osnim digitalnim prikazom HEIDENHAIN Kdodjy Sqi Hspfx Abxen