Deckel Fp 3 Nc nakup rabljenega (699)

Stanje: rabljeno, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 – Year of manufacture 1979 Manual travel X: 300 mm Y: 160 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed on X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 and 1.8 kW (pole-changeable) Power connection: 380 Volt, 50 Hz - Stepless feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill feed at vertical milling head: 60 mm - Vertical milling head swivelable and extendable horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Separate control cabinet Dcsdpfxjr D T U Ds Afwjp - Original chip tray to be mounted on the machine base - Electrical diagram available Required space (L x W x H): 1,350 x 1,100 x 1,700 mm Weight: 770 kg Very good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine no.: 2102-2601 >> Swivelling, tilting, and rotating table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Draw-in system S20x2 >> Weight: approx. 800 kg Dodpfxeu Racre Afwocp Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all lead screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter measurements that the machine will approach automatically. The FP1 was housed in a training workshop and was only occasionally used. An oil change has been carried out. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1994, Universal tool milling machine Make: DECKEL Model: FP 4 MK Aktiv Year of manufacture: 1994 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2203-8668 Dsdpfx Asfzbtmsfwecp with warranty Geometric acceptance with test protocol Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Universal table 660 x 380 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamping DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating manual - used, as seen -

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1986, dolžina podajanja os X: 580 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 450 mm, največja hitrost vretena: 2.500 obr/min, Grunding Contour 2 miza 800x460 mm Dcedpsy E N Dvefx Afwep hodi 580x400x450 mm maksimalna hitrost vretena 2500 min⁻¹ vreteno tip 40

Stanje: pripravljen za uporabo (rabljen), Deckel Maho 5100027000 touch panel for Deckel Maho CNC 432 control, serial no. as per photo, used, normal signs of wear, 100% fully functional, scope of delivery as shown in photos. Dcsdpfxei D Upgo Afwep

Stanje: rabljeno, Leto izdelave: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm Table clamping surface 600 x 210 mm Dcsdpfxjwwwr Ee Afwjp Spindle taper SK 40 Spindle speeds 40 - 2000 rpm Feeds 5 - 500 mm/min Rapid traverse 1.2 m/min Total power requirement 1.9 kW Machine weight approx. 0.7 t - Machine from training workshop - Accessories: fixed table, vertical head with extendable quill, 3-axis HEIDENHAIN digital readout, various short and long arbors, various collets, original DECKEL tool cabinet

Stanje: rabljeno, Leto izdelave: 2003, Tehnični podatki: x-gib: 3600 mm y-gib: 900 mm z-gib: 820 mm b-os: -90 – +90 ° Nadzorni sistem: Siemens 840 D Revija za orodja s: 30 mesti Hitri pomik: 100 m/min Hitri pomik: 60 m/min Delovni čas stroja: 71 372 ur Delovni čas vretena: 22 527 ur Vreteno: Moč: 0,8 – 25 kW Število vrtljajev: 20 – 18 000 vrt/min Stožec: HSK - A 63 Velikost mize: 4200 x 900 mm Nosilnost mize: 4200 kg Skupna poraba moči: 92 kW Teža stroja (približno): 30 t Dimenzije stroja (približno Š x G x V): 4,6 x 8,7 x 3,3 m DECKEL MAHO DMF 360 Linear je dinamično obdelovalno središče s premično mizo, zasnovano za celovito obdelavo velikih in težkih obdelovancev. Zahvaljujoč linearnemu pogonu na osi X doseže stroj zelo visoke hitrosti hitrega pomika in krajše časovne intervale, kar ga naredi še posebej primeren za orodjarno, proizvodnjo orodij in strojev. Koncept premične mize zagotavlja visoko stabilnost pri obdelavi dolgih obdelovancev. Linearni pogon na osi X s hitrim pomikom do 100 m/min. Opremljen z vrtljivo glavo (os B) za numerično nadzorovano obdelavo. Dcodpfx Afozi Nc Rswep Velike poti za obdelovance dolžine nad 4 m. Visoka natančnost zaradi direktnih merilnih sistemov in termične simetrične konstrukcije. *

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, Dear Sir or Madam, We are pleased to offer a Deckel FP1 3-axis milling machine, equipped with retrofitted safety features. These newer models come with central lubrication, an electric coolant pump, and a brake motor as standard. Additionally, thanks to the Harting connector, the control cabinet can be disconnected from the machine in no time. The connection of all safety components to the control cabinet is also implemented with this connector type, ensuring that handling remains user-friendly. We provide a 12-month warranty on all retrofitted safety devices, which we can supply for any machine model! The electronic spindle guard is adjustable across multiple axes and is designed to prevent access to the working spindle while also protecting against hazards such as flying chips, coolant, etc. The electronic spindle safety cap is intended to prevent interference with the rotating spindle stub, including the tool clamping area. Delivery time: on request Year of manufacture: 1989-1992 Machine no. 2102-xxxx Table: fixed angle table Travels: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Dcodpouw Uu Nefx Afwep Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless 5–500 mm/min Rapid traverse: 1,200 mm/min Features and accessories: coolant device, central lubrication, manual, machine feet, electronic spindle guard, electronic spindle safety cap Our service promise to you: - We are a certified master engineering company - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we will completely or partially overhaul your chosen machine - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories, such as additional safety equipment - We are happy to handle shipping and/or installation for you

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 4.550 h, Krmilnik SIEMENS SINUMERIK 810/840D Dimenzija mize 800 x 500 mm Obremenitev mize 500 kg X hod 630 mm Y hod 500 mm Z hod 500 mm Hitrost vrtenja 8000 vrt/min Vpenjalo SK40 ATC magazin za 24 orodij Hitri pomiki 30 m/min Teža 4500 kg Dimenzije D x Š x V = 3100 x 2100 x 2400 mm Dsdpfxjy T I Ays Afwscp Dodatna oprema - Hladilni sistem - Dokumentacija Stroj je bil malo uporabljen. V dobrem stanju.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1978, Universal tool milling machine Make: DECKEL Model: FP 1 with infinitely variable feed Year of manufacture: approx. 1975 – partially overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue with warranty Geometric acceptance with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 250 mm (T-slot: 12 mm) - Vertical milling head ISO 40 with drawbar thread S 20 x 2 - Coolant device - Operating manual - used, as seen - Dsdpodf E H Ajfx Afwjcp

Stanje: delavnici obnovljeno (rabljeno), dolžina podajanja os X: 300 mm, dolžina pomika po osi Y: 160 mm, dolžina podajanja os Z: 340 mm, Updated Machineseeker Description (with Axis Travel) Deckel FP1 Aktiv – 3 Axes – Partially Refurbished – Immediately Operational Offered is a Deckel FP1 Aktiv in technically inspected, partially refurbished condition. The machine has been professionally reconditioned and is in a dependable, ready-to-use state. Ideally suited for workshops, toolmaking, training environments, as well as prototype and small-batch production. This is not an unchecked used machine, but a technically overhauled toolroom milling machine with a clearly defined scope of delivery and reliable lead time. Technical Data and Features Dodpox Tdy Iefx Afwjcp Travel distances: X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Infinitely variable feed on all 3 axes Coolant system Brake motor Rigid angle table New LED work lamp New leveling feet Technical documentation in PDF format Scope of Refurbishment Workshop-tested and partially refurbished Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of all settings as required Replacement of all lubricants Replacement of selected standard and various wear parts New paint finish in RAL 7035 / 7016 The conscious decision for a partial refurbishment provides an optimal balance between operational safety, cost-efficiency, and availability. A full regrinding of the guideways was not carried out, as there was no technical necessity for it. Scope of Delivery Machine loaded free of charge Delivery time approx. 12 weeks

Stanje: dober (rabljeno), 1 used universal tool milling machine Make: Deckel Model: FP 1 Year of manufacture: 1982 Dsdpfx Aforn I Rzowocp Technical specifications: X-axis travel: 300 mm Y-axis travel: 160 mm Z-axis travel: 340 mm Spindle taper: SK 40 Table size: 600 x 210 mm Spindle speeds: 40–2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6 x 1.3 x 1.8 m

Stanje: pripravljen za uporabo (rabljen), Deckel Maho 27073757 / a touch panel for Deckel Maho CNC 432 control unit, serial number as shown in the photo, used, normal signs of wear, 100% fully functional, scope of delivery as per photos Dcodpfji D Upcex Afwsp

Stanje: rabljeno, Deckel rezkalni stroj FP1 s 3-osnim digitalnim prikazovalnikom 380V 120-1900 vrt./min Pomik osi X: 300 mm Pomik osi Y: 150 mm Pomik osi Z: 340 mm Vpenjalo za orodje: MK 4 z vpenjalnim navojem S 20 x 2 Tip rezkalne glave: vertikalna rezkalna glava Tip mize: fiksna miza Vpenjalna površina mize: 600 x 210 mm Djdpfsy Ddd Usx Afwocp Velikost T-utora: 12 mm Pomik osi X: 290 mm Pomik osi Y: 150 mm Pomik osi Z: 330 mm Teža: 700 kg Deckel rezkalni stroj FP1

Stanje: zelo dobro (rabljeno), Deckel FP1 AKTIV (3-Axis Aktiv) Machine No.: 2102-3240 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment/Accessories: - Heidenhain 3-axis Aktiv digital display, Type TNC 113 - Infinitely variable feed on X, Y and Z axes - Quill travel on vertical milling head: 60 mm - Vertical milling head tiltable and extendable 100 mm horizontally - Coolant system (coolant tank in machine base) - Documentation - Centralized lubrication - Machine vise Dsdoyll A Tjpfx Afwjcp - Various tool holders/collets/tools Required installation space (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been cosmetically refurbished and technically inspected. Videos showing the geometry can be provided upon request. Backlash Y-axis: 0.1mm Backlash X-axis: 0.2mm Backlash Z-axis: 0.15mm Runout horizontal spindle: 0.001mm Runout vertical spindle: 0.001mm Deviation parallelism Y-axis: 0.002mm (measuring length 150mm) Deviation parallelism X-axis: 0.01mm (measuring length 300mm) Videos demonstrating the geometry measurement can be provided upon request. The following parts have been renewed: - Gears in the horizontal head replaced and gear shaft newly mounted - New guide cover Z-axis + various add-on parts - Machine reconditioned - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Function test carried out

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 27.475 h, potovalna razdalja osi X: 1.035 mm, pomik osi Y: 560 mm, pomik po osi Z: 510 mm, največja hitrost vretena: 14.000 obr/min, število osi: 3, Ta 3-osna obdelovalna naprava tipa DECKEL MAHO DMC 1035 je bila izdelana leta 2008. Ima hod 1.035 mm po osi X, 560 mm po osi Y in 510 mm po osi Z. Naprava je opremljena s krmilnikom Siemens 840D in dosega hitrost vretena 14.000 vrt/min. Če iščete visokokakovostne možnosti obdelave, razmislite o vertikalnem obdelovalnem centru DECKEL MAHO DMC 1035, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. - Število položajev za menjavo orodja: 30 - Delovni čas: 27.475 ur - Delovni čas vretena: 8.040 ur Tehnične specifikacije Dcodpfxj Agviqj Afwep Velikost konusa: SK 40

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Univerzalni rezkalni stroj Deckel FP1 iz učilnice Tehnični podatki: >> Številka stroja: 57752/08 >> Vrtljivo-nagibna miza >> Število vrtljajev: 40 – 2000 vrt/min >> Podajanje po 2 osi >> Moč pogona: 1 / 1,5 kW >> Gibi po osi X/Y/Z: 300/150/340 mm >> Vertikalni in horizontalni vretenčni nastavek – SK40 Djdo Ahq Ekjpfx Afwscp >> Zavora vretena >> Sistem za vpenjanje S20x2 >> Teža približno 700 kg >> Sistem za hlajenje O stroju: Ponujamo univerzalen rezkalni stroj Deckel FP1 v odličnem, originalnem stanju. Stroj ima zelo malo igre v mehanizmu in vsa vretena se zlahka premikajo. Stroj ima zavorno moč, prejšnji lastnik je predelal omarico za upravljanje. Certifikat BGR ni več veljaven. Izvedena je bila menjava olja. Stroj FP1 izvira iz večjega podjetja in je bil uporabljen samo za izobraževalne namene. Izkoristite priložnost in stroj pregledajte in preizkusite na licu mesta. Stroj je na voljo takoj. Po dogovoru lahko stroj opremimo z novim digitalnim prikazovalnikom K&C.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, FP1 rezkalni stroj – popolnoma funkcionalen in z obsežno opremo Na prodaj je FP1 rezkalni stroj, popolnoma funkcionalen in z obsežno opremo. Oprema vključuje, med drugim: Orodjno omarico Delilnik Djdpfx Afjz Ingiowjcp Primež/primeži različne vpenjalne glave različna orodja in druga oprema Stroj se prodaja skupaj z opremo, ki je prikazana na fotografiji oziroma je na voljo. Stanje: rabljen, popolnoma funkcionalen Ogled: možen po dogovoru. Za vsa vprašanja nas kontaktirajte.

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 46.500 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.600 mm, pomik osi Y: 1.100 mm, pomik po osi Z: 900 mm, dolžina podajanja os X: 3.600 mm, dolžina pomika po osi Y: 1.100 mm, dolžina podajanja os Z: 900 mm, nazivna (navidezna) moč: 130 kVA, proizvajalec krmilnikov: Siemens, model krmilnika: 840SE, dolžina obdelovanca (maks.): 3.600 mm, širina obdelovanca (maks.): 1.100 mm, premer obdelovanca (maks.): 1.100 mm, teža obdelovanca (maks.): 5.000 kg, skupna višina: 3.042 mm, skupna dolžina: 9.280 mm, skupna širina: 4.608 mm, širina mize: 1.100 mm, dolžina mize: 4.200 mm, obremenitev mize: 5.000 kg, premer vrtljive mize: 1.050 mm, največja hitrost vrtenja: 50 obr/min, skupna masa: 32.050 kg, hitrost vretena (min.): 20 obr/min, največja hitrost vretena: 18.000 obr/min, delovne ure vretena: 21.500 h, dovod hladilne tekočine: 40 letvica, nos vretena: HSK 63, število mest v zalogovniku orodij: 120, montažni premer: 1.050 mm, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, transportni trak za ostružke, DMF 360, linearna obdelovalna enota, letnik 2011, s krmilnikom Siemens 840D Solutionline. Dodpfsz Riy Rsx Afwjcp 120-mestni menjalnik orodij. HSK 63 vreteno. Vreteno s hitrostjo 18.000 vrt/min. Odstranjevalec sekancev. IKZ 1000 l, 80/40 bar. Pregrada delovnega prostora. 3D tipalo Heidenhein. Blumov laser. Ročno kolo. Pnevmatsko čiščenje skozi vreteno. Pištola za izpiranje. Avtomatska vrata. A-os Lehman EA 420. Hidravlični sistem za vpenjanje okrogle mize. Vmesnik za robota. Ločevalnik oljnih in emulzijskih meglic.

Stanje: rabljeno, Leto izdelave: 1978, X-travel 300 mm y-travel 160 mm z-travel 340 mm Clamping surface of table 600 x 210 mm Spindle taper SK 40 Spindle speeds 40 - 2000 rpm Feeds 5 - 500 mm/min Rapid traverse 1.2 m/min Total power requirement 1.9 kW Dcodpfewl N R Njx Afwop Machine weight approx. 0.7 t - Machine from training workshop - Accessories: fixed table, vertical head with extendable quill, digital readout on 3 axes HEIDENHAIN, counter bearing, various short and long milling arbors, various collets, original DECKEL tool cabinet

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Brez minimalne cene – zagotovljeno prodaja po najvišji ponudbi! Nakladanje: 01.12. do 10.12. TEHNIČNE PODROBNOSTI Dede Adui Aspfx Afwocp PODATKI O POMIKU Os X: 400 mm Os Y: 300 mm Os Z: 300 mm DELOVNA MIZA Dimenzije mize: 600 × 210 mm Število T-utora: 4 Širina T-utora: 12 mm VRETENO IN POMIK Hitrost vrtenja vretena: do 2.000 vrt/min Območje pomika: 10–500 mm/min PODROBNOSTI O STROJU Proizvajalec: Deckel Tip: FP1 Vrsta stroja: orodjarna frézarka Dimenzije (D × Š × V): 1.000 × 800 × 1.500 mm Teža: 700 kg OPREMA Omarica za orodja Ustrezna dodatna oprema za stroj

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, poteza s peresom: 90 mm, Dear Sir or Madam, We are pleased to offer you a very well-maintained Deckel FP4M (K) active milling machine featuring a rotary-tilt-swivel table and 4-axis digital readout. With its comprehensive equipment, this model stands out as a real highlight among conventional machine tools. The machine has been thoroughly inspected in our workshop, is in excellent condition, and is immediately ready for operation. We look forward to your inquiry! Delivery time: Available immediately Machine No.: xxxx-xxxx Year of manufacture: xxxx Table design: Rotary-tilt-swivel table Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, infinitely variable Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Rapid traverse: 1300 mm/min Travel X/Y/Z: 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Further features and accessories include: 4-axis Heidenhain digital readout, 3-axis active control, hydraulic tool clamping, rotary-tilt-swivel table, coolant system, leveling feet, operating manual, and much more upon request... Our service promise to you: Dcedpsvvtlgefx Afwop - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - On request, we offer a complete or partial overhaul of the selected machine - You are free to choose the paint color of your selected machine - Upon request, you can order additional accessories such as tools directly - If desired, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation as well

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F729 Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very good CONDITION Technical Data: >> Year of manufacture: 1992 >> Machine number: 2102-6289 >> Rigid angular table (freshly planed) >> Spindle speed: 40–2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake Dsdpfxou T D Nro Afwscp >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital display >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all slides move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed on all three axes is infinitely variable, and the machine also features rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain DRO, you can enter dimensions and the machine will automatically move to them. The FP1 was previously used in a training facility and was only occasionally operated. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our premises.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Stroj za obdelavo s frezalno glavo Deckel FP1 Lokacija: Bad Tölz Dcodezv Sm Sjpfx Afwop Ogled je možen. Na voljo so še druge rabljene stroje. Stopite v stik z nami.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Brez minimalne cene – zagotovljen prodaja po najvišji ponudbi! Nakladanje: od 01.12. do 10.12. TEHNIČNE PODROBNOSTI Hodi Os X: 300 mm Os Y: 300 mm Os Z: 400 mm Delovna miza Dimenzije mize: 620 × 390 mm Vreteno Območje hitrosti: 40–2.500 min⁻¹ Nosilec orodja: SK 40 Nagibna glava za frezanju: ± 90° Pogon Območje pogona: 2–3.600 mm/min Hitri pogon: 4 m/min Upravljanje Djdpe Adz Huofx Afwjcp Upravljanje: Deckel DIALOG 4 PODROBNOSTI O STROJU Vrsta stroja: orodjarna frezarka Proizvajalec: Deckel Model: FP2 MC Dimenzije (D × Š × V): 2.000 × 1.800 × 1.800 mm Teža: 1.000 kg