Rezkalni stroj za orodje

DECKEL FP 4 MK

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za obdelavo s stransko glavo Deckel FP 4 MK Tip 2203 Opremljen s hidravličnim vpenjalom za orodje in centralnim sistemom za mazanje. Isdpfezvxlhex Ah Ustn

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 585 mm, pomik osi Y: 185 mm, pomik po osi Z: 320 mm, skupna višina: 2.245 mm, skupna širina: 1.340 mm, skupna dolžina: 1.140 mm, širina mize: 240 mm, dolžina mize: 1.000 mm, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 100 obr/min, skupna masa: 1.000 kg, delovno območje: 650 mm, vhodna napetost: 400 V, razdalja od mize do središča vretena: 370 mm, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Vrtalna zmogljivost jekla ----- 50 mm Rezkalna zmogljivost jekla ----- 25 mm Obodna rezkalna zmogljivost ----- 100 mm Premik v vzdolžni smeri (X) ----- 585 mm Premik v prečni smeri (Y) ----- 185 mm Premik v višini (Z) ----- 320 mm Horizontalni motor ----- 1,5 kW Vertikalni motor ----- 2,2 kW Horizontalno rezkalno vreteno ----- 60 ~ 1350 obr/min (9) Vertikalno rezkalno vreteno ----- brezstopenjsko 100-600 / 350-2000 obr/min Vpenjanje vretena ----- ISO 40 Miza ----- 1000 x 240 mm Teža ----- 1000 kg VKLUČUJE * DELTA frekvenčni pretvornik * 3-osni digitalni prikaz SINO * Avtomatski vzdolžni in prečni pomik delovne mize * LED osvetlitev * Hladilni sistem * Luksuzna upravljalna omarica Iodpega Twfefx Ah Uotn * Nagibna rezkalna glava levo/desno 0 - 45 stopinj * Zasučna delovna miza * Razni držala v kovčku

Stanje: zelo dobro (rabljeno), Pokrov FP 4 MK Stroj za obdelavo z orodjem Deckel FP 4 MK s krmilnikom Heidenhain TNC 113, leto izdelave 1990, temeljito obnovljen pri FPS 2021. Odlično stanje, skladno z zahtevami CE!! Stroj izvira iz oddelka za izdelavo prototipov podjetja Castwerk Technologies. Tehnični podatki: Leto izdelave 1990 Temeljito obnovljen pri FPS 2021 Digitalni prikaz: 3-osni aktivni digitalni prikaz HEIDENHAIN TNC 113 Pot giba osi X: 500 mm Pot giba osi Y: 400 mm Pot giba osi Z: 400 mm Itodszy U E Ejpfx Ah Uon Vpenjalna glava za orodje: SK 40 hidr., vpenjalna glava DIN 2080 Tip rezkalne glave: Vertikalna rezkalna glava Območje vrtljajev: 50 - 2.500 vrt/min, 18 stopenj Vrsta mize: Kotna miza Površina za vpenjanje mize: 800 x 490 mm Velikost T-utora: 14 mm Teža: približno 1.450 kg Dimenzije: približno 2.500 x 2.700 x 2.100 mm Dodatna oprema in izvedba: Krmilnik Heidenhain TNC 113 Hidravlični vpenjalnik, vertikalni in horizontalni Avtomatsko centralno mazanje Zavora vretena Tehnična dokumentacija, sheme rezervnih delov, navodila za uporabo krmilnika in primeri programiranja Ročni kolesa Hladilni sistem O stroju: Ponujamo stroj za obdelavo z orodjem Deckel FP 4 MK s krmilnikom Heidenhain TNC 113. Ta univerzalni rezkalni stroj je v zelo dobrem, originalnem stanju. Izvira iz podjetja, kjer je bil uporabljen predvsem za usposabljanje. Zelo enostaven za upravljanje. Stroj ima tudi hidravlični vpenjalnik, vertikalni in horizontalni. Prehod iz vertikalne v horizontalno konfiguracijo je zelo enostaven, saj se vertikalna glava preprosto odklopi. Vodila se redno podmazujejo s centralnim mazanjem. Stroj Deckel je bil pri nas mehansko in električno preverjen. Izkoristite priložnost in si stroj oglejte in preizkusite na licu mesta, pri čemer bo stroj vključen. Dodatne rezkalne stroje priznanih proizvajalcev najdete na naši spletni strani.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP4MK with 3-Axis Heidenhain Digital Readout, Light Grey, Excellent Condition, CE Compliant!!! Technical Data: >> Year of construction: 1992 Machine no. 2203-8489 >> Fixed angular table >> Speed: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel (X/Y/Z): 500/400/400 mm >> Vertical milling head traversable on spindle carrier >> Vertical and horizontal quill – SK40 taper >> Vertical quill extendable by 90 mm Itedpfew Evq Aex Ah Uon >> Hydraulic clamping system >> Weight approx. 1600 kg Accessories and Equipment: >> 3-axis active Heidenhain digital readout >> Coolant system >> Chip tray >> Electric central lubrication >> Operating manual, spare parts diagrams About the machine: Offered here is a Deckel FP4M Aktiv universal milling machine in excellent condition and CE compliant. The machine has minimal backlash and all spindles move smoothly. The milling machine runs quietly even at maximum speeds. This model features hydraulic clamping. On this newer version of the FP4, the feed can be continuously adjusted in all three axes, and each axis is equipped with rapid traverse. A significant advantage is the active 3-axis Heidenhain digital readout, allowing input of dimensions for the machine to move to automatically. Oil has been changed, and the machine has been mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. You are welcome to inspect and test this machine under power at our location.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed – Excellent Condition, CE Compliant Technical Data: - Year of manufacture: 1990 Machine no.: 2102-5046 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed in 3 axes - Rapid traverse in 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300/160/340 mm - Vertical milling head adjustable on spindle carrier by 100mm - Vertical quill and horizontal quill – SK40 - Drawbar system S20x2 - Weight: approx. 800 kg Accessories and Equipment: - 3-Axis Heidenhain TNC 113 Digital Readout - Coolant system Itjdpezbb E Aofx Ah Ujn - Machine lamp - Operating manual & spare parts list About the machine: Offered here is a universal milling machine Deckel FP1, CE compliant and in excellent condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable in all three axes, and rapid traverse is also available on them. A major advantage is the active 3-axis digital readout. With the Heidenhain TNC 113 control, you can input dimensions and let the machine automatically travel to those positions. This FP1 was used in a training workshop and was only operated occasionally. Oil has been changed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes working easier and more precise. Take the opportunity to inspect and test the machine on site under power.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1994, Universal tool milling machine Make: DECKEL Model: FP 4 MK Aktiv Iodpfjfzbtmjx Ah Ustn Year of manufacture: 1994 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2203-8668 with warranty Geometric acceptance with test protocol Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Universal table 660 x 380 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamping DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating manual - used, as seen -

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, poteza s peresom: 60 mm, skupna višina: 1.935 mm, skupna dolžina: 2.000 mm, skupna širina: 200 mm, največja hitrost vrtenja: 2.500 obr/min, vrtljajska hitrost (min.): 50 obr/min, vrsta vhodnega toka: trifazni, skupna masa: 1.445 kg, dolžina mize: 460 mm, teža obdelovanca (maks.): 400 kg, obremenitev mize: 400 kg, širina mize: 800 mm, leto zadnje generalne obnove: 2013, trajanje garancije: 6 meseci, Stroj sme v roce 2013 kompletně a kvalitně generálně opravili. Mohli jsme jej odkoupit zpět od zákazníka, který jej velmi málo používal, a provedli jsme kompletní servis a generální prohlídku. Řídící systém 3 osy – aktivní – digitální odměřování HEIDENHAIN TNC 113 Otáčky 50 – 2500 ot./min, geometricky odstupňovaná přímá převodovka s 18 stupni otáček pro maximální točivý moment / výkon frézování Posuv 6,3 až 630 mm/min, plynule nastavitelné Rychloposuv 1,3 m/min Pinola Výsuvná pinola, vertikální 60 mm SK40 s upínacím závitem M16, volitelně: s DECKEL pilovým závitem S20 x 2 Výsuvná pinola, horizontální cca 100 mm Osy X/Y/Z 500/400/400 mm Itedpjyitxqofx Ah Usn Stůl Pevný úhlový stůl 800×460 mm Vybavení • Vertikální a horizontální vřeteno • Frézovací hlava ručně naklápěcí +/- 90 ° • Centrální mazání Volitelné příslušenství • Měch Z-osy • Vana na třísky • Strojní lampa • Univerzální stůl • Otočný stůl • Hoblovací hlava • Dělička • Protikus • atd.

Stanje: dober (rabljeno), Skladiščna številka: 3010 Proizvajalec: Deckel Številka stroja: 31488 Tip / Model: FP 1 Pomiki x-y-z: 300 - 150 - 340 mm Miza: 600 x 200 mm Območje vrtljajev: 40 do 2.000 obr/min Vreteno: MK 40 Pomiki: 16 do 500 mm/min Priključna moč: 1 / 1,5 kW Iodow D N Thopfx Ah Uetn Dodatki/Oprema: digitalni prikaz Elesta Stanje: dobro Teža: 0,8 t Dimenzije: 800 x 1.000 x 1.800 mm

Stanje: novo, Leto izdelave: 2026, Completely overhauled, as-new condition machine, upgraded to the legally mandated safety standard “State of the Art” in accordance with the Occupational Health and Safety Regulation of the Professional Associations. Control Cabinet Electronics: Installation of a new CE-compliant control cabinet in line with the latest statutory requirements of the trade associations: BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally, the complete machine can be delivered in CE configuration. A CE Declaration of Conformity is issued for this machine, making FPS Werkzeugmaschinen GmbH the manufacturer of record. This means the machine fully complies with the requirements of the German Ordinance on Industrial Safety and Health (BetrSichV). The year of manufacture is aligned with the machine’s delivery date. Certified to: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1. Iodpfx Ahsh R S Tco Ujtn Control: 3-axis FPS Aktiv digital position display Spindle speed: 50 – 2,500 rpm, geometrically graduated direct-drive gearbox with 18 speed steps for maximum torque and milling performance Feed: 6.3 to 630 mm/min, infinitely variable Rapid traverse: 1.3 m/min Quill: Extendable vertical quill, 60 mm SK40 with M16 drawbar thread (optional: with DECKEL saw thread S20 x 2) Extendable horizontal quill approx. 100 mm Axes travel: X/Y/Z 500/400/400 mm Table: Fixed angle table 800 x 460 mm Equipment: • Vertical and horizontal spindle • Milling head manually swivels +/- 90° Options: • Z-axis bellows • Chip tray • Machine lamp • Centralized lubrication • Universal table • Rotary table • Shaping head • Dividing head • Steady rest • etc.

Stanje: rabljeno, Leto izdelave: 2006, x-travel 320 mm y-travel 240 mm z-travel 300 mm Total power requirement 3 kW Machine weight approx. 1 t O F F E R We can offer you, subject to prior sale and errors excepted, from stock, without obligation: STIMIN Universal Tool Milling Machine with Digital Readout Model FUS-22-2M Year of manufacture 2006 539 _____ Working area: Longitudinal travel X-axis 320 mm Cross travel Y-axis 240 mm Vertical travel Z-axis 300 mm Clamping surface 320 x 670 mm Table load capacity approx. 75 kg Tool holder SK 40 18 spindle speeds 45 – 2240 rpm Quill stroke 60 mm Feeds X / Y - axis, stepless 2 - 1,600 mm/min Feeds Z - axis, stepless 2 - 1,000 mm/min Spindle drive power 1.5 kW Total drive approx. 3 kW - 400 V – 50 Hz Itjdpfx Aswp S Sdjh Usn Weight approx. 1,000 kg Accessories / Special Equipment: • Manual handwheels on all 3 axes for conventional milling • Additionally equipped with a digital readout (ACU RITE) for all 3 axes • Fixed angle table 320 x 670 installed • Swivel-type vertical milling head, + / - 90° tiltable • Rigid machine structure with sturdy design • Work light, coolant device, swiveling control panel, chip tray, operating instructions • The universal milling machine also complies with CE standards, making it particularly suitable for training workshops or other businesses. Condition : Very good condition! With manual operation, this is the ideal machine for training workshops or small batch production! Delivery : ex stock, immediate, FCA Metzingen Payment : strictly net - after receipt of invoice Click here for a video of the machine: We always have a wide selection of conventional and CNC milling machines in stock!