Rod Rezalnik nakup rabljenega (5.765)

Stanje: dober (rabljeno), Leto izdelave: 1976, Deckel FP3, orodna rezkalna naprava s 3-osnim digitalnim prikazovalnikom Heidenhain. Stroj je v dobrem stanju. Fiksna miza, vpenjalni stožec SK 40. Oprema: različne napenjalne puše in nosilci rezkalnikov, nasprotni nosilec. V dobrem, takoj pripravenem obratovalnem stanju. Po dogovoru je možen prikaz pod napetostjo. Djdjxbx R Ujpfx Aggswd

Stanje: dober (rabljeno), Leto izdelave: 1995, Universal tool milling machine Deckel FP 1 – several machines available, see pictures Model: FP 1 Dwedpetdcfhsfx Aggsd 3-AXIS Heidenhain digital readout Price: from €9,500 excl. VAT Technical data: X-travel: 300 mm Y-travel: 150 mm Z-travel: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T-slot width: 12 mm Spindle speed range (vertical): 250 – 2000 rpm Spindle speed range (horizontal): 40 – 315 rpm Working spindle speed steps: 8 Feed range: 10 – 500 mm/min Feed steps: 8 Quill stroke: 60 mm Spindle taper: SK 40 Dimensions/Weight: 1235 x 1160 x 1800 mm / approx. 800 kg

Stanje: dober (rabljeno), Leto izdelave: 1981, Deckel FP3L Aktiv with 3-axis Heidenhain Aktiv digital readout, fixed table, vertical milling head, SK 40 spindle taper and S20x2 spindle mount. In good, operational condition. Can be demonstrated under power by prior arrangement. Dwodpfx Ajwg S Nksggod

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Heidenhain Digital Readout, Original Condition!!! Technical Data: >> Machine No. 56560/08, year of manufacture approx. 1975 >> Fixed angle table Dedpfxou Nvxms Aggewd >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system: S20x2 >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: Offered here is a universal milling machine Deckel FP1 in very good original condition. The Deckel has minimal backlash in the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel under power on site.

Stanje: dober (rabljeno), Leto izdelave: 1995, Macmon M 100 E universal milling machine with 3-axis Elesta-Heidenhain digital readout from a training department. Fixed table, SK 40 spindle taper. Good, ready-to-use condition; can be demonstrated under power by arrangement. Dwodpov Azb Njfx Agged

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Orodni rezkalni stroj Macmon M 100 NC Hitrost brezstopenjsko nastavljiva, Vpenjalni stožec SK 40 Sistem za hlajenje Djdpfx Aex Hga Dsggswd Navodila za uporabo

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture approx. 1975, machine no. 0681 >> Swiveling and tilting table (completely overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: vertical & horizontal spindle >> Extensible vertical and horizontal quill - SK-40 >> Drawbar system M16 >> Weight approx. 1300 kg Accessories and Equipment: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Centralized lubrication Dsdpfx Agexu E I Hsgswd About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are new. The swiveling and tilting table is as good as new. An oil change has been performed. The machine has been mechanically and electrically tested. The digital readout makes working easier and even more precise. Take the opportunity to inspect and test the Deckel FP3 under power on site. The machine is immediately available!!!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Complete Overhaul - TOP Condition Technical Data: >> Machine No. 53819/08 Dwsdpfxjvb Ud Uo Agged >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Power feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Drawbar type: S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine feet About the machine: For sale is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash and all feed screws run smoothly. An oil change was performed. The FP1 underwent a complete overhaul by Huttelmaier in 2006 and has been used only sparingly since then. The RSF digital readout makes operation easier and even more precise. Take the opportunity to inspect and test-run this machine under power on site.

Stanje: dober (rabljeno), Leto izdelave: 1990, Macmon M 100 E universal milling machine with 2-axis Elesta-Heidenhain digital readout, from a training department. Features a fixed table and SK 40 spindle taper. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Dsdjrazzrjpfx Aggjwd

Stanje: dober (rabljeno), Leto izdelave: 1975, Deckel FP3 universal milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories include various collets and milling arbors, as well as a tailstock. Machine is in good operational condition and can be demonstrated under power by prior arrangement. Dwedou Ezb Eepfx Aggod

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine no.: 2102-2601 >> Swivelling, tilting, and rotating table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW Dwodpfx Agsu Racroged >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Draw-in system S20x2 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all lead screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter measurements that the machine will approach automatically. The FP1 was housed in a training workshop and was only occasionally used. An oil change has been carried out. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Emco C40 Linear with Digital Readout and Contour Control – Excellent Condition, CE-Compliant! Djdpfowxxdfjx Aggswd Technical Data: >> Year of Manufacture: 2008 Machine No.: BA1DW2501 >> Milling Table Clamping Surface: 800 x 400 mm Clamping Slots: 8 Slot Width: 14 H8 Slot Spacing: 50 mm Max. Table Load: 300 kg >> Infinitely Variable Spindle Speeds: 10–5,000 rpm >> Infinitely Variable Feed Rate: 10–2,000 mm/min Rapid Traverse X-axis: 5,000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical and Horizontal Quill – SK40 >> Hydraulic Tool Clamping System >> Quill Stroke: 80 mm >> Weight: approx. 2,000 kg >> Dimensions (approx.): 2.5 x 2 x 2 m >> Main Drive Motor: 7 kW >> Spindle Brake >> Technical Documentation, Spare Parts Diagrams, Operating Manual >> Swiveling Enclosure >> Coolant System >> Machine Lamp >> Indexing Head with Tailstock >> Steady Rest >> Röhm Machine Vise About the machine: For sale is a Universal Milling Machine Emco C40 Linear with contour control. This universal milling machine is in almost new condition. It comes from a government facility where it saw very little use. The control system is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal axes. Converting from vertical to horizontal milling is straightforward thanks to the pivotable vertical head. The Emco has been mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power on our premises.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit by FA Huttelmaier Very good CONDITION Dwedpfeu Nvwvjx Aggod Technical Specifications: - Year of manufacture: 1985, Machine no. 2102-2891 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300 / 160 / 340 mm - Vertical milling head movable 100 mm on column - Vertical and horizontal quill – ISO 40 taper - Drawbar system S20x2 - Weight approx. 800 kg Accessories & Equipment: - 3-axis digital readout Heidenhain TNC111 - Coolant system - Operating manual, spare parts diagram About the machine: Offered here is a universal milling machine Deckel FP1, year 1985, in very good condition. The FP1 was overhauled in 2008 by the company Huttelmaier. The machine has minimal play on the handwheels and all leadscrews move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, feed is continuously variable on all three axes and, in addition, the machine features rapid traverse on all axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions which the machine automatically moves to. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F729 Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Djdou T D Nrepfx Aggjwd Very good CONDITION Technical Data: >> Year of manufacture: 1992 >> Machine number: 2102-6289 >> Rigid angular table (freshly planed) >> Spindle speed: 40–2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital display >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all slides move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed on all three axes is infinitely variable, and the machine also features rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain DRO, you can enter dimensions and the machine will automatically move to them. The FP1 was previously used in a training facility and was only occasionally operated. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Deckel FP2 Aktiv, orodjarska rezkalna naprava s 3-osnim Heidenhain TNC 111 Aktiv digitalnim prikazom. Stroj je v zelo dobrem stanju, prihaja iz državnega izobraževalnega oddelka. Fiksna miza, vreteno SK 40. Oprema: različne vpenjalne puše in nosilci rezkarjev, kontrapodpora. Zelo dobro delujoč, pripravljen za uporabo. Možna predstavitev pod napetostjo po dogovoru. Dedpjxyhmvefx Aggewd

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 220 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 25 obr/min, leto zadnje generalne obnove: 2026, Dear Sir or Madam, Djdpox Hr Dzofx Aggswd We are offering for sale a Deckel FP2 Aktiv milling machine. This newer version impresses particularly with its infinitely variable spindle speed control featuring a Heidenhain Aktiv controller, which makes operation both extremely straightforward and highly convenient. The machine has undergone an extensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site. Delivery time: on request Machine no.: 2202-xxxx Table: fixed angle table or rotary/swivel/tilting table Travel paths: X 400 mm / Y 220 mm / Z 400 mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25–2500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: stepless Equipment and accessories: 3-axis Heidenhain digital readout, stepless feed adjustment on all 3 axes, Heidenhain digital display with Aktiv controller, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can provide a complete or partial overhaul of the selected machine - Upon request, you can order additional accessories such as tools, etc. - Upon request, we can install further equipment, such as safety devices, directly for you - We are happy to arrange shipping and/or installation services

Stanje: dober (rabljeno), Acera F3 Rezkalni stroj vrhunske kakovosti. Dwsdpfjr Ixpdex Aggsd Motor in menjalnik delujeta brezhibno. Ni nobene dodatne opreme razen tiste, ki je vidna na slikah. Lahko se naloži na europrikolico in se organizira prevoz po vsej Evropi.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, with 3-axis Heidenhain ND 780 digital readout, as new condition!! Dedpfx Aevbifgeggjwd Technical Data: >> Machine No.: 2202-7020, FPS No.: 3364, year: 2013 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK-40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Features: >> 3-axis Heidenhain ND 780 digital readout >> Brake motor with immediate spindle stop >> Centralized lubrication >> 2x emergency stop >> Operating manual >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP2, repowered by FPS, in as-new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine features an electrical centralized lubrication system and two emergency stop switches for added safety. As of 2013, both mechanically and electrically tested. The Heidenhain digital readout simplifies work and ensures even greater precision. Take the opportunity to inspect and test the Deckel under power on site. The machine is available immediately.

Stanje: novo, Leto izdelave: 2025, dolžina podajanja os X: 300 mm, dolžina pomika po osi Y: 165 mm, dolžina podajanja os Z: 280 mm, potovalna razdalja osi X: 310 mm, pomik osi Y: 170 mm, pomik po osi Z: 330 mm, poteza s peresom: 70 mm, največja hitrost vretena: 2.600 obr/min, hitrost vretena (min.): 40 obr/min, skupna masa: 730 kg, Dear Sir or Madam, We are pleased to offer you the Macmon M100 NC milling machine. This is a true all-rounder for training and small batch production environments. The Macmon combines a conventional machine base with a Heidenhain TNC128 CNC path control, making this model an absolute must-have in certain work areas. Best of all: With a footprint of just one square meter, this machine fits into any workshop! Standard Technical Specifications: • Heidenhain TNC 128 controller (integrated in the control panel) • Ribbed cast construction with hardened and ground guideways on the column and support • Swiveling vertical head, 360° rotation • Extendable quill, stroke 70 mm • Removable vertical head for switching between vertical and horizontal milling Dwedpfxox H Nw Se Aggjd • Prism guides on all axes • Ground leadscrew on all axes • Mechanical tool clamping for both vertical and horizontal spindles • Tool holder ISO 40 for tools according to DIN 2080 AT 3 with draw thread S 20 x 2 or M 16 • Fixed angle table 215 x 600 mm, T-slots 4 x 12 H7 (spacing 45 mm) • Vertical clamping surface 195 x 640 mm, T-slots 2 x 12 H7 (spacing 90 mm) • HEIDENHAIN direct linear measuring systems, resolution 0.001 mm • Positioning accuracy 0.02 mm, repeatability 0.005 mm • Horizontal milling unit, console, and end support • Chip tray, blue RAL 5019 • Painted blue RAL 5019, grey RAL 7035 • 1 operating manual • 1 CD with TNC 128 programming instructions • 1 inspection protocol and basic circuit diagram • 1 oil hand press • With counter bearing, running bushing ø 16 mm (slide bearing) for milling arbor length 230 mm • Machine lamp • Chip guard (required safety device according to EN 13128 for EU countries)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Ladies and Gentlemen, We are offering for sale a partially overhauled Deckel FP1 featuring a 3-axis Heidenhain TNC113 active control system, renowned for its ease of operation. This newer model, manufactured in 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone thorough partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary-tilt/swivel table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless, 5–500 mm/min Rapid traverse: 1,200 mm/min Equipment and accessories: 3-axis Heidenhain digital readout TNC113 with active control, stepless feed adjustment on all three axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service commitment to you: Dwsdpopy Eldsfx Aggjd - We are a certified master workshop specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We are happy to handle shipping and/or installation for you

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP4MK with 3-Axis Heidenhain Digital Readout, Light Grey, Excellent Condition, CE Compliant!!! Technical Data: >> Year of construction: 1992 Machine no. 2203-8489 >> Fixed angular table >> Speed: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel (X/Y/Z): 500/400/400 mm >> Vertical milling head traversable on spindle carrier >> Vertical and horizontal quill – SK40 taper >> Vertical quill extendable by 90 mm >> Hydraulic clamping system >> Weight approx. 1600 kg Accessories and Equipment: >> 3-axis active Heidenhain digital readout >> Coolant system >> Chip tray >> Electric central lubrication >> Operating manual, spare parts diagrams Dwsdpfsw Evq Aex Aggod About the machine: Offered here is a Deckel FP4M Aktiv universal milling machine in excellent condition and CE compliant. The machine has minimal backlash and all spindles move smoothly. The milling machine runs quietly even at maximum speeds. This model features hydraulic clamping. On this newer version of the FP4, the feed can be continuously adjusted in all three axes, and each axis is equipped with rapid traverse. A significant advantage is the active 3-axis Heidenhain digital readout, allowing input of dimensions for the machine to move to automatically. Oil has been changed, and the machine has been mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. You are welcome to inspect and test this machine under power at our location.

Stanje: dober (rabljeno), Please read the technical specifications carefully. If you consider this machine as a potential investment, we kindly request your full identification including a correct telephone number and email address when submitting an offer. DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Enlarged working area to: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed, X/Z-axis: 5 – 500 mm/min Feed rate adjustment: stepless Rapid traverse X/Z-axis: 1,200 mm/min Feed, Y-axis: manual Fixed angle table: 600 x 210 mm Tilting vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data subject to change without notice! Features: Djdpfx Agexyc Tkegjwd - For horizontal machining, the milling head is swivelled 90 degrees and pushed back. - 3-axis precision digital readout HEIDENHAIN - Stepless feed in X/Z-axis - The machine was partially overhauled by a specialist company several years ago. Equipment: - 3-axis digital readout HEIDENHAIN - Micro-cooling/lubrication system - Fixed angle table - Chip tray - Machine lamp - Machine feet Further accessories available on request! Condition: Good to very good, from a training facility Available from March 2026

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed, in Excellent Condition, CE Compliant Technical Data: >> Year of manufacture: 1992, Machine No. 2102-6209 >> Fixed angle table (freshly planed) >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle slide, adjustable by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system Dsdpfjxdi Ivex Aggswd >> Machine lamp >> Operating manual, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine, CE compliant, in very good condition. The machine exhibits minimal backlash and all spindles move smoothly. The milling machine operates very quietly even at maximum speeds. A special feature is that the electrical cabinet is connected to the machine via a plug, which makes transportation easier. In this newer FP1 model, the feed on all three axes is infinitely variable, and there is also rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain positioning control, you can enter the dimensions and the machine will automatically approach them. This FP1 was used in a training workshop and was only occasionally operated. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout facilitates your work and delivers even higher accuracy. Take advantage of the opportunity to view and test this machine on site under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP4M with 3-axis Heidenhain active digital readout – Excellent condition, CE compliant!!! Technical Specifications: Dsdpfou Tuk Hsx Aggowd >> Year of manufacture: 1992 Machine No. 2203-8449 >> Fixed angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier >> Vertical quill and horizontal quill - SK40 >> Vertical quill extendable 90 mm >> Hydraulic drawbar system >> Weight approx. 1600 kg Accessories and Equipment: >> 3-axis active Heidenhain digital readout >> Coolant system >> Chip tray >> Centralized electric lubrication unit >> Operating manual, spare parts diagrams About the machine: Offered is a Deckel FP4M Universal Milling Machine, active version, in excellent condition. The machine features minimal backlash and all feed screws move smoothly. Even at maximum spindle speeds, the milling machine runs smoothly. The machine is equipped with hydraulic tool clamping. This FP4M was only used occasionally in a government facility for training purposes. On this newer FP4 model, the feed rates on all three axes are steplessly adjustable, and the machine features rapid traverse in every axis. A major advantage is the active 3-axis digital readout. With the Heidenhain traverse control, you can enter dimensions that the machine will automatically position to. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout system makes operation easier and more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: rabljeno, potovalna razdalja osi X: 762 mm, pomik osi Y: 406 mm, pomik po osi Z: 508 mm, Milling machine, used Dodpfxetud Utj Aggewd Manufacturer: Fadal Model: 904-1 VMC 3016 Year of manufacture: Serial no.: 9401487 Technical specifications: X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Spindle taper: SK 40 Spindle speed: 8,000 rpm Machine weight: 3,800 kg