Rod Rezalnik nakup rabljenega (56.066)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine no.: 2102-2601 >> Swivelling, tilting, and rotating table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Draw-in system S20x2 >> Weight: approx. 800 kg Dsdpfju Racrsx Adhecn Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all lead screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter measurements that the machine will approach automatically. The FP1 was housed in a training workshop and was only occasionally used. An oil change has been carried out. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno),

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2810-4023, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 450 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 40 obr/min, dolžina mize: 430 mm, širina mize: 710 mm, skupna višina: 2.400 mm, skupna dolžina: 2.300 mm, skupna širina: 2.300 mm, skupna masa: 2.000 kg, For sale is a well-maintained and fully operational Deckel FP4NC tool milling machine equipped with Contour 3 control. Included is a dividing (indexing) head (4th and 5th axis) Deckel FP 2212 (No. 800-0237), significantly expanding the machine’s range of applications. The machine has only been used for machining plastics. It is immediately ready for operation and ideally suited for precise single-part and series production, or for educational institutions. The machine was last in use in November 2024. The machine can be inspected by appointment at any time. Collection on site: Grossacherstrasse 41, 8634 Hombrechtikon, ex loading dock. Technical data: Machine: Deckel FP4NC Machine/Vehicle number: 2810 - 4023 Condition: used, very good condition Accessories: Deckel FP 2212 dividing head + extensive additional accessories Travels: Dodpfx Adjwrya Iohscn x-axis: 500 mm y-axis: 400 mm z-axis: 450 (390) mm Work table: Table surface: 710 x 430 mm Spindle: Speed range: 40 – 4000 rpm (stepless) Spindle drive: 4.0 kW Tool holder: SK40 Feeds: Working feed: 10 – 2000 mm/min Rapid traverse: 4.0 m/min Power and weight: Total drive power: 9 kW Machine weight: approx. 2 t Footprint: approx. 2.4 x 2.3 x 2.3 m (LxWxH) Features: CNC control Contour 3 Dividing head for 4th and 5th axis included Tilting vertical head +/- 130° Rigid angle table Automatic central lubrication Pendant control panel with detachable handwheel Separate control cabinet with main safety switch Emergency stop on the control panel Compact design Special features: Deckel dividing head FP 2212 included in delivery Extensive range of accessories for versatile machining

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1978, Deckel FP3L Aktiv with 3-axis Heidenhain Aktiv digital readout, fixed table, vertical milling head, SK 40 spindle taper, S20x2 spindle mount. Ready-to-operate condition. Machine can be demonstrated under power by prior arrangement. Dedoug T Dxjpfx Adhecn

Stanje: rabljeno, potovalna razdalja osi X: 762 mm, pomik osi Y: 406 mm, pomik po osi Z: 508 mm, Milling machine, used Manufacturer: Fadal Model: 904-1 VMC 3016 Year of manufacture: Serial no.: 9401487 Technical specifications: X-axis travel: 762 mm Dcsdpfx Adotud Utjhsn Y-axis travel: 406 mm Z-axis travel: 508 mm Spindle taper: SK 40 Spindle speed: 8,000 rpm Machine weight: 3,800 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 400 mm, največja hitrost vretena: 5.000 obr/min, hitrost vretena (min.): 10 obr/min, hitro pomikanje X-os: 5.000 m/min, hitri pomik os Y: 5.000 m/min, hitri pomik na osi Z: 5.000 m/min, dolžina mize: 800 mm, širina mize: 400 mm, skupna višina: 1.990 mm, skupna dolžina: 2.100 mm, skupna širina: 2.190 mm, največja hitrost vrtenja: 5.000 obr/min, vrtljajska hitrost (min.): 10 obr/min, skupna masa: 2.370 kg, obremenitev mize: 300 kg, teža obdelovanca (maks.): 300 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, When maximum precision is required in confined spaces, conventional milling machines are the ideal choice. For small batch production or larger workpieces, cycle-controlled milling machines provide an economical alternative. Machine Highlights: - Swiveling control panel - Main spindle with clockwise/counterclockwise operation - All pinch points eliminated by protective covers - Shafts and gears are hardened and ground - Linear guideways Dodpfjd D I Tmjx Adhecn - Main motor with spindle brake - Milling spindle mounted with four radial/axial bearings - Sinumerik 828D or Heidenhain TNC 620 Working Area: - Travel range in X/Y/Z: 600 / 400 / 400 mm - Distance spindle nose to table: 230 - 630 mm (horizontal milling spindle) - Rapid traverse speed X/Y/Z: 5,000 mm/min - Working feed X/Y/Z: 10 - 2,000 mm/min - Max. feed force in X/Y/Z: 10 / 10 / 15 kN - Clamping surface: 800 x 400 (fixed angle table) - Max. table load: 300 kg (fixed angle table) Vertical Milling Head: - Speed range: 10-5,000 rpm - Power: 13 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 124 Control System - AS NEW CONDITION - CE Compliant!! Technical Data: >> Year of manufacture: 2013, Machine no. 610261 >> Milling table clamping surface: 800 x 425 mm T-slots: 6 Slot width: 14 H7 Slot spacing: 63 mm Maximum load: 300 kg >> Spindle speeds S I: 1 – 1125 rpm Spindle speeds S II: 1126 – 4500 rpm >> Feed rate (potentiometer at 100%): 0 – 2000 mm/min Rapid traverse X and Y: 5000 mm/min Rapid traverse Z: 4000 mm/min >> Travel X/Y/Z: 600/400/400 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 2000 kg >> Dimensions approx. 2 x 2 x 2 m >> Main drive motor: 5.5 kW Dcedpfx Adjurv T Ishsn Accessories and Equipment: >> Heidenhain TNC 124 control system >> Electronic handwheel Heidenhain HR410 >> Hydraulic clamping vertical and horizontal >> Chip rinsing gun >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts lists, operating manual >> Coolant system About the Machine: For sale is a tool milling machine Kunzmann WF 600M with a Heidenhain TNC 124 control system. This universal milling machine is in as-new condition. It comes from a large company where it was only lightly used for training purposes. The control is very user-friendly. In addition, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal setup is simple thanks to the tilting vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our facility. Two identical machines available.

Stanje: zelo dobro (rabljeno), Digital display Travel paths X/Y/Z: 400 x 200 x 400 mm Dodpfx Aown Td Esdhocn Table size: 700 x 330 mm Tool holder: ISO 40 Hydraulic vice Completely overhauled in 2019

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1987, Universal milling machine Brand: DECKEL Model: FP 1 Aktiv Year of manufacture: 1987 – overhauled, newly painted, RAL 7035 light grey / RAL 7012 basalt grey Machine no.: 2102-3429 with warranty geometric inspection with test report Accessories: - 3-axis digital readout HEIDENHAIN TNC 113 with active function for X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Centralized lubrication, electric Dsdpfx Aohtrd Iodhecn - Operating manual - used, as seen -

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Complete Overhaul - TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Power feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Drawbar type: S20x2 >> Weight approx. 700 kg Accessories and Equipment: Dodevb Ud Uspfx Adhocn >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine feet About the machine: For sale is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash and all feed screws run smoothly. An oil change was performed. The FP1 underwent a complete overhaul by Huttelmaier in 2006 and has been used only sparingly since then. The RSF digital readout makes operation easier and even more precise. Take the opportunity to inspect and test-run this machine under power on site.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1976, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5008 grey blue Machine no.: 52860/08 Milling head no.: 7296/80 Warranty: 12 months single-shift from delivery on the mechanical components overhauled by us. Electrical and electronic components are excluded, as these have only undergone a functional test. For machines located outside our Northern Bavaria sales region, travel expenses are to be borne by the customer. Geometric acceptance test with test protocol included. Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Operating manual Used, sold as seen The machine corresponds technically Dsdpsmhfrrjfx Adhecn to the state of the art at the time of manufacture.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780, as new! Technical data: - Machine No.: 2101-51084, year 2011 - Fixed angle table - Spindle speed: 40 - 2000 rpm - Feed on 2 axes - Drive power: 1 / 1.5 kW - Travel X/Y/Z: 300/150/340 mm - Vertical quill SK40 and horizontal quill SK40 - Drawbar system: S20x2 - Weight approx. 700 kg Accessories and equipment: - 3-axis digital readout Heidenhain ND 780 - Hydraulic vice - Collets - Tool holders - Milling cutters - Operating manual - Coolant system About the machine: Offered here is a Deckel FP1 universal milling machine, repowered by FPS, in like-new condition. Included accessories are a hydraulic vice with swivel base, collet chucks, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is immediately available. Dcodpfx Adjwpi Dqohen

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1984, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1984 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey Dedohtq Edepfx Adhocn Machine no.: 2102-2520 with warranty Geometric inspection with test protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function on X, Y and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual - Used, as inspected -

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, with 3-axis Heidenhain ND 780 digital readout, as new condition!! Technical Data: Dcsdpevbifgjfx Adhjn >> Machine No.: 2202-7020, FPS No.: 3364, year: 2013 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK-40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Features: >> 3-axis Heidenhain ND 780 digital readout >> Brake motor with immediate spindle stop >> Centralized lubrication >> 2x emergency stop >> Operating manual >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP2, repowered by FPS, in as-new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine features an electrical centralized lubrication system and two emergency stop switches for added safety. As of 2013, both mechanically and electrically tested. The Heidenhain digital readout simplifies work and ensures even greater precision. Take the opportunity to inspect and test the Deckel under power on site. The machine is available immediately.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1976, Universal tool milling machine Manufacturer: DECKEL Model: FP 2 Year of manufacture: 1976 – partially overhauled, newly painted RAL 7035 light grey / RAL 7046 tele grey 2 / RAL 5008 grey blue Machine no.: 7138 Milling head type: 2013 Milling head number: 2013-2856 Warranty: 6 months, single-shift operation from delivery, covering the partially overhauled mechanics performed by us. Geometric acceptance with test protocol Accessories: - 3-axis digital readout EASSON ES-8A, as new - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40, long version with draw bolt thread S 20 x 2 - Coolant system - Operating manual -Used, as inspected- Dcedpfxohqg Tlj Adhen

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP4M with 3-axis Heidenhain active digital readout – Excellent condition, CE compliant!!! Technical Specifications: >> Year of manufacture: 1992 Machine No. 2203-8449 >> Fixed angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier Djdsu Tuk Hspfx Adhocn >> Vertical quill and horizontal quill - SK40 >> Vertical quill extendable 90 mm >> Hydraulic drawbar system >> Weight approx. 1600 kg Accessories and Equipment: >> 3-axis active Heidenhain digital readout >> Coolant system >> Chip tray >> Centralized electric lubrication unit >> Operating manual, spare parts diagrams About the machine: Offered is a Deckel FP4M Universal Milling Machine, active version, in excellent condition. The machine features minimal backlash and all feed screws move smoothly. Even at maximum spindle speeds, the milling machine runs smoothly. The machine is equipped with hydraulic tool clamping. This FP4M was only used occasionally in a government facility for training purposes. On this newer FP4 model, the feed rates on all three axes are steplessly adjustable, and the machine features rapid traverse in every axis. A major advantage is the active 3-axis digital readout. With the Heidenhain traverse control, you can enter dimensions that the machine will automatically position to. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout system makes operation easier and more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1978, Universal tool milling machine Make: DECKEL Model: FP 2 stepless Year of manufacture: 1978 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-10147 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout HEIDENHAIN ND 780 - Universal table 700 x 240 mm (T-slot: 12 mm) Dodpfxofcqfps Adhocn - Vertical milling head SK 40 with draw thread S 20 x 2 - Central lubrication, manual - Coolant system - Operating manual - used, as seen -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout K&C (new) and 3 stepless feed drives – Excellent Condition Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2867 >> Swivel-tilt rotary table (newly planed) >> Speed range: 40 – 2000 rpm >> Stepless feed drive in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quills – SK40 taper >> Drawbar system M16 >> Weight approx. 800 kg Equipment and Accessories: >> 3-axis digital readout K+C, newly installed with manufacturer's warranty and operating manual. Readout features: setting reference points, zero points, coordinate input, mm/inch switching, absolute or incremental coordinates, circle functions, hole arrays, radius milling functions, etc. Dcodpot Aarpjfx Adhon >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a Deckel FP1 universal milling machine, year 1985, in outstanding condition. The machine has minimal handwheel backlash and all spindles move smoothly. Even at maximum spindle speeds, the machine runs very quietly. On this newer FP1 model, feed drive is steplessly adjustable on all three axes, and rapid traverse is also available. The oil has been changed. Machine has been mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power onsite.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1983, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 2 Aktiv Year of manufacture: 1983 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine No.: 2202-10799 Milling head type: 2271 Milling head number: 300-1406 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 111 - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, manual - Coolant system - Operating manual - used, as seen - Djdpfx Adefzk Hfjhscn

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Digital Readout K&C, infinitely variable feed, painted in light grey, excellent condition Technical Data: >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 2 axes >> Drive power: 1.5 / 1.9 kW Dcsdpfet Aav Isx Adhjn >> Spindle brake >> Rapid traverse >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable 100 mm on column >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Equipment and Accessories: >> 3-axis digital readout K&C newly installed with manufacturer's warranty and operating manual. Display unit: Reference points, zero setting, coordinate input, mm/inch switch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP1 in very good condition. The machine has very little backlash and all spindles move smoothly. All bellows have been replaced. On this newer FP1 model, feed is infinitely variable on two axes; the machine is also equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically inspected. The new K&C digital readout makes working easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: delavnici obnovljeno (rabljeno), Universal tool milling machine Make: harich (DECKEL) Model: B (FP 2) infinitely variable overhauled with CE certification geometric acceptance with inspection report with warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 Dcodpfx Adovfdatshen - Central lubrication, manual - Coolant system - Operating manual CE and safety equipment: - new machine electrics with control cabinet - protective cover on the vertical milling head with electrical interlock - chuck guard with electrical interlock - drive motor with brake function - control panel with emergency stop, enable, start and stop buttons, potentiometer for feed regulation - new documentation for machine and control cabinet - CE declaration of conformity

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Heidenhain Digital Readout, Original Condition!!! Technical Data: >> Machine No. 56560/08, year of manufacture approx. 1975 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes Dsdpfxou Nvxmj Adhjcn >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system: S20x2 >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: Offered here is a universal milling machine Deckel FP1 in very good original condition. The Deckel has minimal backlash in the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel under power on site.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1994, Universal tool milling machine Make: DECKEL Model: FP 4 MK Aktiv Year of manufacture: 1994 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2203-8668 with warranty Geometric acceptance with test protocol Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Universal table 660 x 380 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamping DIN 2080 - Chip tray - Central lubrication, electric - Coolant system Dcsdpfx Adefzbtmjhen - Operating manual - used, as seen -

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Universal Tool Milling Machine Make: DECKEL Model: FP 3 L Aktiv Year of manufacture: unknown – overhauled, newly painted, Dodsh Rv U Ejpfx Adhjcn RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue Machine no.: 2302-2319 Milling head type: 2271 Milling head no.: 700-0883 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, electric - Coolant device - Operating manual - Drill bit grinding attachment with diamond wheel - used, as seen -

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1976, Universal tool milling machine Brand: DECKEL Model: FP 2 Year of manufacture: 1976 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine number: 6976 with warranty Geometric inspection with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Dsdpfx Adod Tytyjhjcn drawbar thread S 20 x 2 - Coolant device - Operating manual -Used, as seen-