Rod Rezalnik nakup rabljenega (56.591)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Digital Readout K&C, infinitely variable feed, painted in light grey, excellent condition Technical Data: >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable 100 mm on column >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 Fedpfx Afot Aav Isljpb >> Weight approx. 700 kg Equipment and Accessories: >> 3-axis digital readout K&C newly installed with manufacturer's warranty and operating manual. Display unit: Reference points, zero setting, coordinate input, mm/inch switch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP1 in very good condition. The machine has very little backlash and all spindles move smoothly. All bellows have been replaced. On this newer FP1 model, feed is infinitely variable on two axes; the machine is also equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically inspected. The new K&C digital readout makes working easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: dober (rabljeno), Leto izdelave: 1979, Deckel FP2 s brezstopenjsko regulacijo, orodna rezkalna stroja. Stroj je v dobrem stanju, tog namizje, SK 40 vpenjalni vreteno, pribor: razne napenjalne tule in držala rezk. V dobrem, delujočem stanju. Po dogovoru je možen prikaz pod napetostjo. Fedpfxexzn Hlo Afljpb

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R0101, potovalna razdalja osi X: 800 mm, pomik osi Y: 300 mm, pomik po osi Z: 300 mm, največja hitrost vretena: 2.000 obr/min, dolžina mize: 1.000 mm, širina mize: 520 mm, Brez izklicne cene – zagotovljena prodaja najvišjemu ponudniku! Rok plačila za stroj je 20.11.2025! Oddaja ponudbe je zavezujoča za pravočasen prevzem med 01.12.2025 in 05.12.2025! TEHNIČNI PODATKI Hodi Hod v osi X: 800 mm Hod v osi Y: 300 mm Hod v osi Z: 300 mm Vreteno Maks. hitrost vrtenja vretena: 2.000 min⁻¹ Min. hitrost vrtenja vretena: 25 min⁻¹ Premer vpenjanja: 40 mm Delovna miza Širina mize: 520 mm Dolžina mize: 1.000 mm PODROBNOSTI O STROJU Dimenzije (D x Š x V): 2.500 x 2.000 x 1.800 mm Fsdpsxm Scuefx Aflspb OPREMA Napetostne klešče Dodatna rezkalna miza (dimenzije mize: 700 x 240 mm) Velik strojni primež (širina čeljusti: 200 mm)

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Milling Machine Macmon M 434 NC Manufacturer: Macmon Model: 434 NC Control: Heidenhain TNC 128 Year of manufacture: 2008 Condition: used X-axis travel: 400 mm Y-axis travel: 250 mm Z-axis travel: 400 mm Clamping surface: 600 x 320 mm Main drive: AC motor, 3 kW Speed range: - Vertical, stepless: 30 – 6300 rpm - Horizontal, stepless: 0 – 4200 rpm Feed rate: 0 – 10 m/min Tool holder: ISO 40 Operating voltage: 400 V / 50 Hz Control voltage: 24V Weight: 1200 kg Scope of delivery: – Documentation – Machine feet Fodpfoxnpg Hex Aflspb – Coolant system – Spindle guard – Machine lamp – HR410 handwheel – Counter support for horizontal spindle

Stanje: novo, Technical data: Fixed angle table: Clamping surface of the fixed angle table: 800 x 400 mm Max. table load: 200 kg Working spindle: Tool holder horizontal and vertical: ISO 40 Main drive motor power / 100% duty cycle: 2.2 kW Vertical milling head: Spindle speed range, stepped: (12) 50 - 2000 rpm Quill stroke: 100 mm Swivel range: +/- 90° Travel: X-axis automatic/manual: 385/400 mm Y-axis automatic/manual: 185/200 mm Z-axis automatic/manual: 365/380 mm Feeds: Feed range: 0-650 mm/min Fjdpfod R S Ndsx Afljpb Number of feeds: infinitely variable Rapid traverse: 1000 mm/min Features: - Machine accuracy according to DIN 8615 - 3-axis digital readouts FAGOR® Innova (option) - Spindle run-out max. 0.005 mm, incl. inspection record according to DIN 8615 (roller bearings by SKF®/NSK®) - Vertical milling head can be swivelled out for horizontal milling (without disassembly) - All critical machine components, e.g. machine base, table, milling head, housing etc., are made from stress-relieved MEEHANITE® quality cast iron (FC 30), heavily ribbed to provide maximum stability and working accuracy. All guideways are coated with TURCITE®-B - All machined surfaces in the work area, such as ways, table surfaces, T-slots, etc., are hardened and precision ground - The powerful drive transmits the main motor's power via belt to the gearbox - All axes have their own DC servo motors, allowing sensitive, infinitely variable adjustment of feed speed Standard equipment: - DC servo motors for all X/Y/Z axes, incl. electromagnetic brake - Rigid box table - Original Ganter Norm® safety handwheels - Chip collecting tray - Backlash-free HIWIN® precision ball screws on all X/Y/Z axes - Main spindle gear transmission - Safety devices according to CE or better: - Spindle guard with multiple micro limit switches, adjustable (enclosure available as an option) - Two emergency stop buttons (1 x machine base, 1 x control panel) - Mechanical Ganter Norm® safety handwheels on all axes - Electromagnetic spindle brake (for immediate spindle stop) - Electrical overload protection for all axes - Electrical equipment by SIEMENS®, BALLUFF® - Brake system prevents table from dropping - Three reducer sleeves SK 40 to MK 1, 2, 3 - Collet chuck with holder to DIN 2080 incl. collet set (Ø 6, 8, 10, 12, 16, 20, 25 mm) - Drawbar - Horizontal milling arbor (Ø27 mm) - Automatic central lubrication - Stainless steel telescopic cover for Z-axis guideway in working area - Machine lamp - Coolant system integrated in machine base - Inspection record according to DIN 8615 - Operating tools - Machine according to CE - Operating manual, spare parts list, including electrical diagrams, etc.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Dear Sir or Madam, We are offering milling machines of the Deckel FP3 type. The machine is at least technically inspected in our workshop and is therefore fully operational. We would be very pleased to receive your inquiry! Delivery time: upon request Dimensions: 2.00x1.60x1.90m (LxWxH) Weight: approx. 1500kg Fjdpfxeq H Eabj Aflspb X-axis travel: 500mm Y-axis travel: 300mm Z-axis travel: 380mm Table clamping surface: 800x420mm Spindle speed range: 40–2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Feed axes: X, Y, Z Feed rate: 10–500mm/min Rapid traverse: approx. 1500mm/min Further equipment and accessories: available on request Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - If desired, we can completely or partially overhaul the selected machine - You are free to choose the paint color of the selected machine - Upon request, you can order additional accessories such as tools directly - Upon request, we can also install further equipment such as safety devices - We are happy to handle shipping and/or installation for you

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout K&C (new) and 3 stepless feed drives – Excellent Condition Technical Data: Fsdst Aarpopfx Aflopb >> Year of manufacture: 1985 Machine No.: 2102-2867 >> Swivel-tilt rotary table (newly planed) >> Speed range: 40 – 2000 rpm >> Stepless feed drive in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quills – SK40 taper >> Drawbar system M16 >> Weight approx. 800 kg Equipment and Accessories: >> 3-axis digital readout K+C, newly installed with manufacturer's warranty and operating manual. Readout features: setting reference points, zero points, coordinate input, mm/inch switching, absolute or incremental coordinates, circle functions, hole arrays, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a Deckel FP1 universal milling machine, year 1985, in outstanding condition. The machine has minimal handwheel backlash and all spindles move smoothly. Even at maximum spindle speeds, the machine runs very quietly. On this newer FP1 model, feed drive is steplessly adjustable on all three axes, and rapid traverse is also available. The oil has been changed. Machine has been mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power onsite.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Deckel FP2 Aktiv, orodjarska rezkalna naprava s 3-osnim Heidenhain TNC 111 Aktiv digitalnim prikazom. Stroj je v zelo dobrem stanju, prihaja iz državnega izobraževalnega oddelka. Fiksna miza, vreteno SK 40. Oprema: različne vpenjalne puše in nosilci rezkarjev, kontrapodpora. Zelo dobro delujoč, pripravljen za uporabo. Možna predstavitev pod napetostjo po dogovoru. Fpjdpfxsxyhmvo Aflsb

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 2300-0053, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 300 mm, dolžina mize: 1.000 mm, širina mize: 520 mm, skupna višina: 1.900 mm, skupna dolžina: 1.500 mm, skupna širina: 1.800 mm, največja hitrost vrtenja: 200 obr/min, vrtljajska hitrost (min.): 40 obr/min, skupna masa: 1.000 kg, - Number of table slots: 6 EQUIPMENT: - Swiveling table - Three-axis digital readout (Heidenhain) - New bellows Fodpfxjwdn A Ue Afljpb - New handwheels

Stanje: rabljeno, Leto izdelave: 2020, Console / Table Horizontal clamping surface (L x W) mm 315 x 710 T-slots (number / width / spacing) mm 5 / 14 / 63 Distance spindle / table mm 100 – 450 Max. table load kg 200 Travel distances, automatic / manual Longitudinal travel (X-axis) mm 400 Cross travel (Y-axis) mm 315 Vertical travel (Z-axis) mm 350 Vertical milling spindle Spindle taper DIN 2080 ISO 40 Spindle speeds rpm 80 – 3,000 Swivelling range degrees +/- 45 Fpedpfx Afsu Tfgxolob Quill stroke, manual mm 80 Feeds Rapid traverse (X/Y/Z) m/min 5 / 5 / 2.5 Feed rate (X/Y/Z) mm/min 2,000 Drive capacities Total power kW 7.5 Machine dimensions and weight Length mm 1,520 Depth / Width mm 2,130 Height mm 1,950 Weight kg 1,700

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780, as new! Fpsdpjwpi Dqofx Aflob Technical data: - Machine No.: 2101-51084, year 2011 - Fixed angle table - Spindle speed: 40 - 2000 rpm - Feed on 2 axes - Drive power: 1 / 1.5 kW - Travel X/Y/Z: 300/150/340 mm - Vertical quill SK40 and horizontal quill SK40 - Drawbar system: S20x2 - Weight approx. 700 kg Accessories and equipment: - 3-axis digital readout Heidenhain ND 780 - Hydraulic vice - Collets - Tool holders - Milling cutters - Operating manual - Coolant system About the machine: Offered here is a Deckel FP1 universal milling machine, repowered by FPS, in like-new condition. Included accessories are a hydraulic vice with swivel base, collet chucks, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is immediately available.

Stanje: dober (rabljeno), Leto izdelave: 1976, Deckel FP3 universal milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories include various collets and milling arbors, as well as a tailstock. Machine is in good operational condition and can be demonstrated under power by prior arrangement. Fjdpexu Uvtsfx Afljpb

Stanje: dober (rabljeno), Leto izdelave: 1980, številka stroja/vozila: 4038, potovalna razdalja osi X: 290 mm, pomik osi Y: 150 mm, pomik po osi Z: 330 mm, montažni premer: 40 mm, dolžina mize: 600 mm, širina mize: 210 mm, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, skupna masa: 700 kg, CONDITION & NOTES: Fsdewxpxmjpfx Afljpb - This is an active path-controlled tool milling machine

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Complete Overhaul - TOP Condition Technical Data: >> Machine No. 53819/08 Fpsdpfx Afevb Ud Uslob >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Power feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Drawbar type: S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine feet About the machine: For sale is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash and all feed screws run smoothly. An oil change was performed. The FP1 underwent a complete overhaul by Huttelmaier in 2006 and has been used only sparingly since then. The RSF digital readout makes operation easier and even more precise. Take the opportunity to inspect and test-run this machine under power on site.

Stanje: dober (rabljeno), Leto izdelave: 1995, Macmon M 100 E universal milling machine with 3-axis Elesta-Heidenhain digital readout from a training department. Fixed table, SK 40 spindle taper. Good, ready-to-use condition; can be demonstrated under power by arrangement. Fpedpfsv Azb Nox Aflsb

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed – Excellent CONDITION Fedpfx Aou Racreflopb Technical Data: >> Year of manufacture: 1984 Machine no.: 2102-2601 >> Swivelling, tilting, and rotating table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Draw-in system S20x2 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all lead screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter measurements that the machine will approach automatically. The FP1 was housed in a training workshop and was only occasionally used. An oil change has been carried out. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F729 Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very good CONDITION Technical Data: >> Year of manufacture: 1992 >> Machine number: 2102-6289 >> Rigid angular table (freshly planed) >> Spindle speed: 40–2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 Fpsdpfx Afsu T D Nroljb >> Weight approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital display >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all slides move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed on all three axes is infinitely variable, and the machine also features rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain DRO, you can enter dimensions and the machine will automatically move to them. The FP1 was previously used in a training facility and was only occasionally operated. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit by FA Huttelmaier Very good CONDITION Technical Specifications: - Year of manufacture: 1985, Machine no. 2102-2891 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300 / 160 / 340 mm - Vertical milling head movable 100 mm on column - Vertical and horizontal quill – ISO 40 taper - Drawbar system S20x2 - Weight approx. 800 kg Accessories & Equipment: - 3-axis digital readout Heidenhain TNC111 - Coolant system - Operating manual, spare parts diagram About the machine: Offered here is a universal milling machine Deckel FP1, year 1985, in very good condition. The FP1 was overhauled in 2008 by the company Huttelmaier. The machine has minimal play on the handwheels and all leadscrews move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, feed is continuously variable on all three axes and, in addition, the machine features rapid traverse on all axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions which the machine automatically moves to. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem on site under power. Fpjdpfx Aju Nvwvofljb

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis Heidenhain ND 780 digital readout - Excellent Condition! Technical Data: >> Machine No.: 55249/08, Year: 2010 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar thread S20x2 >> Weight approx. 700 kg Accessories and Features: >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic machine vice >> Collets >> Tool holders Fpsdpfjxu Hbhsx Aflsb >> Milling cutters >> Operating manual >> Coolant system About the Machine: Offered is a Deckel FP1 universal milling machine, professionally repowered by FPS and in like-new condition. The accessories include a hydraulic machine vice with swivel base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout enables easier and more precise work. Take the opportunity to inspect and test the Deckel on site under power. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-axis Active Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed in TOP Condition Technical data: >> Year of manufacture: 1979 Machine no.: 2202-10777 >> Rigid angle table (newly planed) >> Spindle speed: 25 – 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Travels X/Y/Z: 400/220/400 mm >> Vertical milling head on spindle carrier, adjustable by 150 mm >> Vertical and horizontal quill – SK40 extendable Fsdpfeuc Ubwex Aflepb >> Drawbar thread: S20x2 >> Weight approx. 1400 kg Accessories and equipment: >> 3-axis TNC 113 Active Digital Readout by Heidenhain >> Coolant system >> Central lubrication About the machine: For sale is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from the laboratory of a government facility where it was rarely used. The machine exhibits minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this later FP2 model, the feed can be infinitely adjusted on all three axes, and rapid traverse is available on every axis. A major advantage is the active 3-axis digital readout. Using the Heidenhain path control, you can enter dimensions that the machine then approaches automatically. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. You are welcome to inspect and test the machine under power on site.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed As-New CONDITION Technical Data: Fsdeu R D I Sspfx Afljpb >> Year of manufacture: 1987 Machine no. 2102-3536 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support adjustable by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Automatic central lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts catalogue About the machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in an as-new, original condition. The machine has very minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed can be infinitely adjusted on all three axes, and the machine also features rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can enter dimensions which the machine then approaches automatically. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically inspected. Thanks to the Heidenhain digital readout, working with the machine is easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed, Light Grey, Excellent Condition Technical Data: >> Year of manufacture: approx. 1990, Machine No. 2102-5231 >> Fixed Angle Table >> Spindle Speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle mount, adjustable by 100 mm >> Vertical quill and horizontal quill – SK40 taper >> Drawbar system M16 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital readout >> Centralized electric lubrication >> Coolant system >> Operating manual and spare parts diagram Details about the Machine: Offered is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has minimal backlash, and all feed screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed in all three axes, as well as rapid traverse in these directions. A major benefit is the active 3-axis digital readout. With the Heidenhain positioning control, you can enter target dimensions, and the machine will automatically move to them. This FP1 was used in a training workshop where it saw only occasional use. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this outstanding machine under power on site. Fpsdjxu E R Iopfx Afljb The machine is available immediately.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture approx. 1975, machine no. 0681 >> Swiveling and tilting table (completely overhauled) Fjdpjxu E I Hsfx Afljpb >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: vertical & horizontal spindle >> Extensible vertical and horizontal quill - SK-40 >> Drawbar system M16 >> Weight approx. 1300 kg Accessories and Equipment: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Centralized lubrication About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are new. The swiveling and tilting table is as good as new. An oil change has been performed. The machine has been mechanically and electrically tested. The digital readout makes working easier and even more precise. Take the opportunity to inspect and test the Deckel FP3 under power on site. The machine is immediately available!!!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-Axis Heidenhain Digital Readout, Infinitely Variable Feed, Very Good Condition Technical Data: >> Year of manufacture: 1978 Machine No. 2202-10163 >> Fixed angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable on spindle carrier by 150 mm >> Vertical and horizontal quill - SK40 extendable >> Draw bar system S20x2 >> Weight approx. 1,400 kg Accessories and Equipment: >> 3-axis digital display Heidenhain >> Coolant system Fedexghtvopfx Aflspb >> Mechanical central lubrication About the Machine: Offered is a universal milling machine Deckel FP2 in very good condition. The FP2 has minimal backlash in the handwheels and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. On this newer FP2 model, the feed can be adjusted steplessly in all three axes; furthermore, the machine is equipped with rapid traverse on every axis. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed, in Excellent Condition, CE Compliant Technical Data: >> Year of manufacture: 1992, Machine No. 2102-6209 >> Fixed angle table (freshly planed) >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle slide, adjustable by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, spare parts list About the Machine: Fpodpoxdi Ivsfx Afleb Offered here is a Deckel FP1 universal milling machine, CE compliant, in very good condition. The machine exhibits minimal backlash and all spindles move smoothly. The milling machine operates very quietly even at maximum speeds. A special feature is that the electrical cabinet is connected to the machine via a plug, which makes transportation easier. In this newer FP1 model, the feed on all three axes is infinitely variable, and there is also rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain positioning control, you can enter the dimensions and the machine will automatically approach them. This FP1 was used in a training workshop and was only occasionally operated. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout facilitates your work and delivers even higher accuracy. Take advantage of the opportunity to view and test this machine on site under power.