Linija Vffs nakup rabljenega (2.069)

Stanje: novo, Leto izdelave: 2025, Complete version of the vertical packaging system with auger dosing unit, screw conveyor, and discharge conveyor belt. Suitable for packaging powdery products with either high or low flowability. The vertical packaging machine (VFFS) is equipped with the following components: PLC (touchscreen operator monitor, available in various languages, e.g., English, German, etc.), date printer, automatic program setup, mark sensor, quick-change forming unit, pneumatic sealing unit, servo motor for film transport (double transport possible), air separator/extraction device (removes air from the bag before sealing—no vacuum is generated), holding device for heavy finished bags, Euro slot punching device, suitable for OPP and PE film (PE unit available at extra cost if required). Knsdpfxsv Nmkvo Aczeb Specifications of the VFFS packaging machine: Filling range: up to 3000ml; Film width: max. 520mm; Bag size min-max: L(80-400)xW(80-250)mm; max. idle machine cycle rate: 50 cycles/minute; Stainless steel 304; 220V, 4kW; 6bar, 0.3m³/min; Machine dimensions: LxWxH: approx. 1150x1790x1650mm; Weight: 600kg. Specifications of auger dosing unit: Filling capacity up to 50l (hopper); Filling range: 10-1000g; max. idle machine cycle rate: 50 cycles/min; Accuracy: ±0.3~1.5% (depending on product); 380V, 2.5kW; Dosing unit dimensions LxWxH: 690x1030x1100mm; Weight: 150kg. Screw conveyor for automatic material transfer to the dosing unit. Vibration motor ensures uniform product flow. Feed hopper with up to 150 liters volume. Size depends on the customer-specific final system. Specifications: Hopper, conveyor length and angle can be customized to product or customer requirements; overall dimensions depend on this. Conveyor length: 3~4m; stainless steel 304; Conveyor speed: 3.0m³/h - 12.0m³/h; 380V, 0.8kW-4.1kW; Weight: 130kg – 270kg. Deviation of the stated specifications is possible. Support bar optionally available. The discharge conveyor features a stainless steel frame. Specifications: Conveyor speed: 30m/min; 220V, 0.55kW; Dimensions LxWxH: approx. 1850x550x1230mm; Weight: 80kg. Complete system dimensions: approx. 2350xW3590xH2500mm, depending on final configuration. The system must be adapted to customer-/product-specific requirements; therefore, deviations in the stated specifications of the modules and machines may occur. Main components: Colored SIEMENS touchscreen display, SIEMENS PLC controller, SIEMENS servo motor, AIRTAC cylinder, AIRTAC solenoid valve, OMRON relay, SIEMENS servo motor for film transport. The machine/plant is also available in further versions for various packaging sizes and packaging speeds. Please note that our new prices are often below the usual prices for used machines. Feel free to inquire and let us know your packaging requirements. – Typically, there are always 30-50 different new machines available from stock for immediate delivery. For custom-manufactured machines, we offer very short lead times starting from approximately 3 weeks. – All machines come with a full warranty.

Leto izdelave: 2025, stanje: novo, Complete version of the vertical packaging system with auger dosing unit, screw conveyor, and discharge conveyor belt. Suitable for packaging powdery products with high or low flowability. The vertical form fill seal machine (VFFS) is equipped with the following features: PLC (touchscreen control monitor available in multiple languages, e.g., English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming unit, pneumatic sealing unit, servo motor for film transport, double transport possible, air displacement/extraction device (removes air from the bag before sealing – a vacuum is not created), support device for heavy finished bags, euro slot punching device, suitable for OPP and PE film (PE unit may incur additional cost). - VFFS Packaging Machine Specifications: Filling range: up to 5000ml; film width: max. 620mm; bag size min-max: L(100-400)xW(180-300)mm; max. idle cycle rate: 45 cycles/minute; Stainless steel 304; 220V, 5kW; 6bar, 0.3m³/min; packaging machine dimensions LxWxH: approx. 1780x1850x1950mm; weight: 700kg. Knsdpfx Aev Nmk Ajczsb - Auger Dosing Unit Specifications: Filling capacity up to 50l (hopper); filling range: 10-5000g; max. idle cycle rate: 40 cycles/min; accuracy: ±0.3~1.5% (depending on product); 380V, 3kW; dosing unit dimensions LxWxH: 600x1250x1200mm; weight: 220kg. - Screw conveyor for automatic conveying of material to the dosing unit. The vibration motor ensures even product flow. Feed hopper with up to 150-liter capacity. Size depends on customer-specific end setup. Specifications: Hopper, conveyor length and angle can be adapted according to customer/product-specific requirements, hence total dimensions will vary. Conveyor length: 3~4m; stainless steel 304; conveying speed: 3.0m³/h – 12.0m³/h; 380V, 0.8kW-4.1kW; weight: 130kg – 270kg. Deviations in the specified specifications are possible. Support bar optionally available. - The discharge conveyor has a stainless steel frame. Specifications: conveying speed: 30m/min; 220V, 0.55kW; dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Dimensions of the complete system: approx. L2980xW3650xH2600mm, depending on final configuration. The system must generally be adapted to customer/product-specific requirements. As such, module and machine specifications may differ as indicated. Key components: Colored SIEMENS touchscreen display, SIEMENS PLC control unit, SIEMENS servo motor, AIRTAC cylinders, AIRTAC solenoid valve, OMRON relays, SIEMENS servo motor for film transport. The machine/system is also available in further versions for various packaging sizes and packaging speeds. Please note that our new prices are often below the standard used prices. Feel free to contact us and let us know your packaging requirements. Usually, 30-50 different new machines are immediately available from stock. For machines that need to be custom-built, we offer very short delivery times starting at approx. 3 weeks. All machines are available with a full warranty.

Leto izdelave: 2025, stanje: novo, Complete dosing and packaging system for liquids, including tank, pump, and discharge conveyor. Suitable for both viscous and non-viscous liquids such as creams, toothpaste, body lotion, shampoo, mayonnaise, ketchup, honey, jam, edible oil, vinegar, juice, milk, etc. The vertical form-fill-seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen control panel, available in various languages such as English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming set, pneumatic sealing unit, servo motor for film transport (double transport possible), air separation/extraction device (removes air from the pouch before sealing—does not generate vacuum), support device for heavy finished pouches, Euro-slot punching device, suitable for OPP and PE film (PE unit available at extra charge if required). Specifications of the VFFS packaging machine: Dosing range: up to 3000 ml; film width: max. 520 mm; pouch size min–max: L(80–400) x W(80–250) mm; max. machine speed without load: 50 cycles/min; stainless steel 304; 220V, 4kW; 6 bar, 0.3 m³/min; machine dimensions (LxWxH): approx. 1150 x 1790 x 1650 mm; weight: 600 kg. Tank and pump specifications: Tank capacity approx. 50 l (customization possible); height approx. 70 mm; pump available in various versions, e.g.: 10–150 ml, 150–500 ml, 500 ml–1L, 1L–2L, 2L–5L, etc. The pumping system is adapted to your individual products based on samples provided. Specifications and product feed may vary accordingly (surcharge possible). The discharge conveyor features a stainless-steel frame. Specifications: conveyor speed 30 m/min; 220V, 0.55 kW; dimensions (LxWxH): approx. 1850 x 550 x 1230 mm; weight: 80 kg. Dimensions of the complete system: approx. L1080 x W3640 x H1720 mm, depending on final configuration. The system must be customized to customer- and product-specific requirements. Therefore, the specified data may deviate depending on the modules and machines supplied. Key components include: Colored touchscreen display SIEMENS, PLC control unit SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. The machine/system is also available in other designs for various packaging sizes and speeds. Please note that our new prices are often below typical used machine prices. Simply inquire and let us know your packaging requirements—we’re happy to advise. We typically have 30–50 different new machines in stock and available for immediate delivery. For custom-built machines, we offer very short lead times from about 3 weeks. All machines are available with full warranty. Kodev Nmlaopfx Aczenb

Leto izdelave: 2025, stanje: novo, Complete version of the vertical packaging system with volumetric dosing unit, 1 cup, single-vessel conveyor, and discharge conveyor belt. Suitable for packing granular products such as sugar, rice, nuts, etc. The vertical packaging machine (VFFS) is equipped with the following components: PLC (touchscreen operation monitor, available in various languages, such as English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming unit, pneumatic sealing unit, servo motor for film transport, dual transport function possible, air separation/extraction device (removes air from the bag before sealing—no vacuum is created), holding device for heavy finished bags, Euro hole punching device, suitable for OPP and PE film (PE unit may incur additional charge). – Specifications of the VFFS packaging machine: filling range: 150–1,200 ml; film width: max. 420 mm; bag size min–max: L(60–300)xW(60–200) mm; maximum machine cycle rate (idle): 50 cycles/minute; stainless steel 30; 220V, 2.2 kW; 6 bar, 0.3 m³/min; machine dimensions: LxWxH: approx. 1080x1300x1400 mm; weight: 500 kg. The dosing unit's cup has a filling capacity of up to 50 l. The single-vessel conveyor also has a filling capacity of up to 50 l. The container is manually filled in the lower position and automatically emptied in the upper position (complete cycle: 1 minute). – Specifications: height: 3–5 m; machine dimensions: L1400xW700xH3500 mm; 220 V/1 kW. Variations possible. The discharge conveyor belt has a stainless steel frame. – Specifications: conveyor speed: 30 m/min; 220V, 0.55 kW; dimensions LxWxH: approx. 1850x550x1230 mm; weight: 80 kg. Dimensions of the complete system: approx. L1080xW4550xH3500 mm, depending on final configuration. The system must always be customized to customer/product-specific requirements, which may result in specific deviations for modules and machines from the specifications provided. Key components: colored SIEMENS touchscreen display, SIEMENS PLC controller, SIEMENS servo motor, AIRTAC cylinder, AIRTAC solenoid valve, OMRON relay, SIEMENS servo motor for film transport. Kedpfxjv Nmi So Aczsnb The machine/system is also available in further versions for various packaging sizes and packaging speeds. Please note that our new prices are often below usual used prices. Please feel free to contact us and let us know your packaging requirements. – We usually have 30–50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times starting from approx. 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Complete version of the vertical packaging system with volumetric dosing unit, single-cup feeder, and outfeed conveyor belt. Suitable for packing granular products such as sugar, rice, nuts, etc. The vertical form-fill-seal machine (VFFS) is equipped with the following components: PLC (touchscreen operator panel, available in multiple languages such as English, German, etc.), date printer, automatic program setup, registration sensor, quick-change forming set, pneumatic sealing unit, servo motor for film transport, option for double transport, air extraction/unit (removes air from the bag before sealing—does not create a vacuum), support device for heavy finished bags, euro-hole punching device, suitable for OPP and PE film (PE sealing unit may incur surcharge).—Specifications of the VFFS packaging machine: Filling range: up to 3,000 ml; film width: max. 520 mm; bag size min-max: L(80-400)xW(80-250) mm; max. idle cycle speed: 50 cycles/minute; stainless steel 304; 220 V, 4 kW; 6 bar, 0.3 m³/min; machine dimensions LxWxH: approx. 1150x1790x1650 mm; weight: 600 kg. The dosing cup has a filling capacity of up to 50 l. The single-cup feeder also has a capacity of up to 50 l. The hopper is manually filled in the lower position and automatically emptied in the upper position (complete cycle: 1 minute).—Specifications: height: 3-5 m; machine dimensions: L1400xW700xH3500 mm; 220 V/1 kW. Variations possible. The outfeed conveyor belt comes with a stainless steel frame.—Specifications: conveying speed: 30 m/min; 220 V, 0.55 kW; dimensions LxWxH: approx. 1850x550x1230 mm; weight: 80 kg. Dimensions of the complete system: approx. L1150xW5040xH3500 mm, depending on final configuration. The system must be tailored to customer/product-specific requirements, so technical specifications of components and machines may vary. Key components: Color touchscreen display SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. The machine/system is also available in further versions for different bag sizes and packaging speeds. Please note that our new prices are often below the typical used equipment prices. Feel free to contact us and inform us about your packaging requirements. – Typically, 30–50 different new machines are always available from stock for immediate delivery. For customer-specific equipment, we offer very short lead times starting from approx. 3 weeks. – All machines are available with a full warranty. Kodpfx Ajv Nmkcoczjnb

Stanje: novo, Leto izdelave: 2025, Complete dosing and packaging system for liquids, including tank, pump, and discharge conveyor belt. Suitable for both viscous and non-viscous liquids such as creams, toothpaste, body lotion, shampoo, mayonnaise, ketchup, honey, jam, edible oil, vinegar, juice, milk, etc. The vertical form fill seal machine (VFFS) is equipped with the following components: PLC (touchscreen operating monitor, available in various languages, e.g. English, German, etc.), date printer, automatic program setup, registration sensor, quick-change forming set, pneumatic sealing unit, servomotor-driven film transport (double transport possible), air separation/removal device (removes air from the bag before sealing—does not generate a vacuum), holder for heavy finished bags, Euro slot punching unit, suitable for OPP and PE film (PE unit possibly at extra cost). — VFFS machine specifications: Filling volume: 150–1200ml; Max. film width: 420mm; Bag size min–max: L(60–300)xW(60–200)mm; Max. machine cycle rate (idle): 50 cycles/min; Stainless steel 304; 220V, 2.2kW; 6 bar, 0.3m³/min; Machine dimensions (LxWxH): approx. 1080x1300x1400mm; Weight: 500kg. — Tank and pump specifications: Tank capacity approx. 50L (customization available); Height: approx. 70mm; Pump available in various versions, e.g. 10–150ml, 150–500ml, 500ml–1L, 1L–2L, 2L–5L, etc. The pump system will be adapted to the customer’s product based on sample submission. Specifications and product feeding may vary accordingly (surcharges may apply). The discharge conveyor has a stainless steel frame. — Conveyor specifications: Conveyor speed: 30m/min; 220V, 0.55kW; Dimensions (LxWxH): approx. 1850x550x1230mm; Weight: 80kg. Knsdpfxsv Nmk Nj Aczjb — Complete system dimensions: approx. L1780xW1850xH1470mm, depending on final configuration. The system must generally be tailored to customer/product requirements, so specifications may vary between modules and machines. Key components: Siemens color touchscreen display, Siemens PLC controller, Siemens servomotor, Airtac cylinders, Airtac solenoid valve, Omron relays, Siemens servomotor for film transport. The machine/system is also available in alternative versions for various packaging sizes and packaging speeds. Please note that our new prices are often lower than typical used prices. Feel free to contact us and share your packaging requirements. — We typically have 30–50 different new machines immediately available from stock. For customized machines, we offer very short delivery times from approx. 3 weeks. — All machines are sold with a full warranty.

Stanje: novo, Leto izdelave: 2025, Complete dosing and packaging system for liquids, including tank, pump, and discharge conveyor. Suitable for viscous and non-viscous liquids such as creams, toothpaste, body lotion, shampoo, mayonnaise, ketchup, honey, jam, cooking oil, vinegar, juice, milk, etc. The vertical form-fill-seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen operator panel, available in various languages, e.g., English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming set, pneumatic sealing unit, servo motor for film transport, dual transport possible, air separation/extraction device (removes air from the pouch before sealing—does not create a vacuum), holder for heavy finished bags, Euro hole punching device, suitable for OPP and PE film (PE unit may incur extra charge). Specifications of the VFFS packaging machine: Filling range up to 5000ml; film width: max. 620mm; pouch size min-max: L(100-400)xW(180-300)mm; max. idle cycle rate: 45 cycles/minute; Stainless steel 304; 220V, 5kW; 6bar, 0.3m³/min; machine dimensions: LxWxH: approx. 1780x1850x1950mm; weight: 700kg. Tank and pump specifications: Tank capacity approx. 50L (customizable); height: approx. 70mm; the pump is available in various versions, e.g., 10~150ml, 150~500ml, 500ml~1L, 1L~2L, 2L~5L, etc. The pump system is tailored to customer products based on sample submission. Specifications and product feeding differ accordingly (surcharges may apply). The discharge conveyor has a stainless steel frame. Specifications: conveyor speed: 30m/min; 220V, 0.55kW; dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Dimensions of the complete system: approx. L1780xW3700xH2020mm, depending on final configuration. The system must be adapted to customer-/product-specific requirements. Therefore, module and machine specifications may vary. Main components: Color touchscreen display SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. The machine/system is also available in various versions for different pouch sizes and packaging speeds. Kodpfxjv Nmlgj Aczsnb Please note that our new prices are often below typical used equipment prices. Feel free to inquire and let us know your packaging requirements. Normally, 30–50 different new machines are available immediately from stock. For custom-built machines, we offer very short delivery times from approx. 3 weeks. All machines are available with full warranty.

Leto izdelave: 2025, stanje: novo, Complete version of the vertical packaging system with 10-head multihead weigher (1.3 l/head), Z-shaped conveyor, platform, discharge conveyor belt, and collection table for finished, packaged products. Suitable for packaging irregular-shaped bulk goods such as potato chips, cornflakes, cookies, nuts, candy, shrimp, or industrial components and products such as screws, nails, metal or plastic parts. The vertical form-fill-seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen operating monitor, available in multiple languages such as English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming set, pneumatic sealing unit, servo motor for film transport, double transport option, air extraction device (removes air from the bag before sealing – does not create a vacuum), support device for heavy finished bags, Euro hole punch, suitable for OPP and PE film (PE sealing unit available at additional cost if required). - Specifications of the VFFS packaging machine: Filling range: 150-1200 ml; film width: max. 420 mm; bag size min-max: L(60-300)xW(60-200) mm; max. idle cycle rate: 50 cycles/minute; stainless steel 304; 220V, 2.2 kW; 6 bar, 0.3 m³/min; machine dimensions LxWxH: approx. 1080x1300x1400 mm; weight: 500 kg. The weighing unit, with its 10 weighing heads (1.3 l/head), offers high weighing accuracy. Also equipped with a PLC, operation via touchscreen (available in multiple languages), 99 programs can be preset or saved, the servo motor (hopper) can be adjusted for different product types. - Specifications: Hopper capacity: 1.3 l; weighing range: 10~1000 g; accuracy: ±0.3~1.5 g (depending on product); max. idle cycle rate: 60 cycles/min; stainless steel 304; 220V, 1.5 kW; dimensions of weighing unit LxWxH: approx. 1436x1086x1258 mm; weight: 400 kg. - Specifications Z-conveyor (for feeding material to the weighing unit): Dimensions can be customized (standard height 3.6 m); conveying capacity: 3-6 m³/h; 380V, 0.75 kW; gross weight: 500 kg. The discharge conveyor features a stainless steel frame. Kedpfjv Nmirsx Aczsnb - Specifications: conveying speed: 30 m/min; 220V, 0.55 kW; dimensions LxWxH: approx. 1850x550x1230 mm; weight: 80 kg. Rotating collection table for collecting the finished bags from the discharge conveyor. Speed is adjustable. Table diameter: 1200 mm (standard); stainless steel 304; 220V, 0.37 kW. Stainless steel platform, necessary for access to the weighing unit and upper part of the packaging machine, dimensions LxWxH: approx. 2x2x2 m. Dimensions of the complete system: approx. L3200xW3200xH3600 mm, depending on final configuration. The system must be adapted to customer- and product-specific requirements, so deviations in the specified dimensions and components may occur based on module and machine versions. Key components: Color touchscreen display SIEMENS, PLC control unit SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. The machine/system is also available in further configurations for various packing sizes and speeds.

Stanje: novo, Leto izdelave: 2025, Complete version of the vertical packaging system with 10-head multihead weigher (1.3 l/head), Z-shaped bucket elevator, platform, discharge conveyor belt, and rotary accumulation table for finished, packaged products. Suitable for packing irregular bulk goods such as potato chips, cornflakes, biscuits, nuts, confectionery, shrimp, industrial components/products such as screws, nails, metal or plastic parts. The vertical form fill seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen operation panel, available in various languages such as English, German, etc.), date printer, automatic program setup, print mark sensor, quick-change forming unit, pneumatic sealing unit, servo motor for film transport, dual transport possible, air separator/exhaust device (removes air from the bag before sealing - does not create a vacuum), bag support bracket for heavy finished bags, Euro slot punching device, suitable for OPP and PE film (PE unit available at extra cost if required). - VFFS packaging machine specifications: Filling range: up to 3000ml; film width: max. 520mm; bag size min-max: L(80-400)xW(80-250)mm; max. machine cycles (no load): 50 cycles/min; stainless steel 304; 220V, 4kW; 6bar, 0.3m³/min; machine dimensions LxWxH: approx. 1150x1790x1650mm; weight: 600kg. The weighing unit, with its 10 weighing heads (1.3l/head), offers high weighing accuracy. Also equipped with a PLC and operated via a touchscreen (also available in various languages), 99 programs can be preset or stored, the servo motor (memory hopper) can be adjusted for different types of products. - Specifications: Memory hopper capacity: 1.3l; weighing range: 10~1000g; accuracy: ±0.3~1.5g (depending on product); max. machine cycles (no load): 60 cycles/min; stainless steel 304; 220V, 1.5kW; weighing unit dimensions LxWxH: approx. 1436x1086x1258mm; weight: 400kg. - Z-bucket elevator specifications (for transporting material to the weighing unit): Dimensions customizable to customer requirements (standard height 3.6m); conveying capacity: 3-6m³/h; 380V, 0.75kW; gross weight: 500kg. The discharge conveyor features a stainless steel frame. - Specifications: conveying speed: 30m/min; 220V, 0.55kW; dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Rotary accumulation table for collecting finished bags from the discharge conveyor. Speed is adjustable. Table diameter: 1200mm (standard); stainless steel 304; 220V, 0.37kW. Stainless steel platform needed for access to weighing unit and upper part of the packaging machine, dimensions LxWxH: approx. 2x2x2m. Dimensions of the complete system: approx. L3200xW3200xH3600mm, depending on final configuration. The system must be customized to customer-/product-specific requirements. Specifications of modules and machines may therefore vary. Key components: Color touchscreen display SIEMENS, PLC control unit SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. Kedpfjv Nmixsx Aczjnb The machine/system is also available in additional versions for various packing sizes and packing speeds.

Stanje: novo, Leto izdelave: 2025, Complete version of the vertical packaging system with auger dosing unit, screw conveyor, and discharge conveyor belt. Suitable for packing powdery products with either high or low flow properties. The vertical form-fill-seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen operation panel, available in various languages, e.g. English, German, etc.), date printer, automatic program setup, registration sensor, quick-change forming set, pneumatic sealing unit, servo motor for film transport, dual transport function possible, air extraction device (removes air from the bag before sealing—does not create a vacuum), holding device for heavy finished bags, euro hole punching unit, suitable for OPP and PE film (PE unit may incur a surcharge). - Specifications of the VFFS packaging machine: Filling range: 150-1200 ml; film width: max. 420 mm; bag size min-max: L (60-300) x W (60-200) mm; maximum machine cycle speed in idle mode: 50 cycles/minute; stainless steel 304; 220 V, 2.2 kW; 6 bar, 0.3 m³/min; packaging machine dimensions: LxWxH: approx. 1080x1300x1400 mm; weight: 500 kg. - Specifications for the auger dosing unit: Filling capacity of up to 50 l (hopper); filling range: 10-300 g; maximum machine cycle speed in idle mode: 60 cycles/min; accuracy: ±0.3~1.5% (depending on product); 380 V, 1 kW; dosing unit dimensions LxWxH: 510x585x930 mm; weight: 100 kg. Screw conveyor for automatic material transfer to the dosing unit. The vibration motor ensures consistent product flow. Feed hopper with up to 150-litre volume. Final size depends on customer-specific system. - Specifications: Hopper, conveyor length, and incline can be customized according to customer/product requirements. Total dimensions depend accordingly. Conveyor length: 3~4 m; stainless steel 304; conveyor speed: 3.0 m³/h - 12.0 m³/h; 380 V, 0.8 kW-4.1 kW; weight: 130 kg – 270 kg. Specification deviations are possible. Support bar available optionally. The discharge conveyor features a stainless steel frame. - Specifications: Conveyor speed: 30 m/min; 220 V, 0.55 kW; dimensions LxWxH: approx. 1850x550x1230 mm; weight: 80 kg. Dimensions of the complete system: approx. L2280xW3100xH2330 mm, depending on final configuration. As a rule, the system must be adapted to customer/product-specific requirements. Therefore, deviations from the module and machine specifications given may occur. Key components: Coloured Siemens touchscreen display, Siemens PLC controller, Siemens servomotor, Airtac cylinders, Airtac solenoid valves, Omron relays, Siemens servomotor for film transport. This machine/system is also available in other versions for various packaging sizes and speeds. Please note that our new prices are often below usual used equipment prices. Simply enquire with us and tell us your packaging requirements. – Usually 30-50 different new machines are available ex-stock for immediate delivery. For customer-specific machines, we also offer very short delivery times, from approx. 3 weeks. – All machines are available with full warranty. Kedpfev Nmkpjx Aczjnb

Stanje: novo, Leto izdelave: 2025, Full version of the vertical packaging system with a 10-head multihead weigher (2.5 L/head), Z-type incline conveyor, platform, outfeed conveyor belt, and rotary collection table for finished, packaged products. Suitable for packaging irregularly shaped bulk goods such as potato chips, cornflakes, biscuits, nuts, candy, shrimp, and industrial components/products like screws, nails, and metal or plastic parts. The vertical form fill seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen control monitor, available in various languages, e.g. English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming set, pneumatic sealing unit, servomotor for film transport, dual film transport possible, air extraction/evacuation device (removes residual air from the pouch before sealing – does not create a vacuum), support device for heavy filled bags, Euro slot punch device, suitable for OPP and PE film (PE unit may be subject to additional charge). Specifications of the VFFS packaging machine: - Filling volume: up to 5000 ml - Film width: max. 620 mm - Bag size min–max: L(100–400)xW(180–300)mm - Max. cycles (no load): 45 cycles/min - Material: Stainless steel 304 - Power supply: 220V, 5 kW - Air supply: 6 bar, 0.3 m³/min - Dimensions (LxWxH): approx. 1780x1850x1950 mm - Weight: 700 kg The weighing unit, with its 10 weighing heads (2.5 L/head), ensures high weighing accuracy. It is also equipped with a PLC, touchscreen control (available in multiple languages), up to 99 programs can be preset/stored, and the servomotor (hopper) can be adjusted for different product types. Specifications: - Hopper capacity: 2.5 L - Weighing range: 10~3000 g - Accuracy: ±0.1~2 g (product-dependent) - Max. cycles (no load): 60 cycles/min - Material: Stainless steel 304 - Power supply: 220V, 1.5 kW - Dimensions (LxWxH): approx. 1600x1136x1484 mm - Weight: 500 kg Z-type incline conveyor (for transporting product to the weighing unit): Dimensions can be customized to customer requirements (standard height 3.6 m); conveying capacity: 3–6 m³/h; power supply: 380V, 0.75 kW; gross weight: 500 kg. The outfeed conveyor belt features a stainless steel frame. Specifications: - Conveyor speed: 30 m/min - Power supply: 220V, 0.55 kW - Dimensions (LxWxH): approx. 1850x550x1230 mm - Weight: 80 kg Rotary collection table for accumulating finished bags from the outfeed conveyor; speed adjustable; table diameter: 1200 mm (standard); stainless steel 304; 220V, 0.37 kW. Knodpfxjv Nmi Ej Aczob Stainless steel platform required for access to the weighing unit and upper part of the packaging machine. Dimensions (LxWxH): approx. 2x2x2 m. Complete system dimensions: approx. L3200xW3200xH3600 mm; dependent on final configuration. The system must be adapted to customer-/product-specific requirements, so variations in the individual modules’ and machines’ specifications are possible. Key components: Color touchscreen panel SIEMENS, PLC controller SIEMENS, servomotor SIEMENS, AIRTAC cylinders, AIRTAC solenoid valves, OMRON relays, SIEMENS servomotor for film transport. The machine/system is also available in other versions for different packaging sizes and speeds.

Stanje: novo, Leto izdelave: 2025, Complete vertical packaging system version with volumetric dosing unit, one cup, single-tank conveyor, and discharge conveyor belt. Suitable for packaging granular products such as sugar, rice, nuts, etc. The vertical form-fill-seal (VFFS) packaging machine is equipped with the following components: PLC system (touchscreen operating monitor, available in multiple languages such as English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming set, pneumatic sealing unit, film transport servo motor, dual transport possible, air separation/extraction device (removes air from the bag before sealing—without creating a vacuum), holder device for heavy finished bags, Euro-hole punching device, suitable for OPP and PE film (PE unit may incur additional cost). — Specifications of the VFFS packaging machine: filling range up to 5000 ml; film width max. 620 mm; bag size min-max: L(100–400) x W(180–300) mm; max. machine cycle rate in idle: 45 cycles/min; stainless steel 304; 220V, 5kW; 6 bar, 0.3 m³/min; packaging machine dimensions: LxWxH: approx. 1780x1850x1950 mm; weight: 700 kg. The cup of the dosing unit has a filling capacity of up to 50 l. The single-tank conveyor also has a filling capacity of up to 50 l. The tank is filled manually in the lower position. In the upper position, it is emptied automatically (complete cycle: 1 minute). — Specifications: height: 3–5 m; machine dimensions: L1400xW700xH3500 mm; 220V/1kW. Variations possible. The discharge conveyor features a stainless steel frame. — Specifications: conveyor speed: 30 m/min; 220V, 0.55kW; dimensions LxWxH: approx. 1850x550x1230 mm; weight: 80 kg. Dimensions of the complete system: approx. L1780xW5100xH3500 mm, depending on final configuration. The system must generally be adapted to customer-/product-specific requirements. Therefore, deviations in the stated specifications of modules and machines may occur. Key components: SIEMENS color touchscreen display, SIEMENS PLC control unit, SIEMENS servo motor, AIRTAC cylinders, AIRTAC solenoid valves, OMRON relays, SIEMENS film transport servo motor. Knjdpfxev Nmkio Aczjb The machine/system is also available in other versions for various packaging sizes and packaging speeds. Please note that our new prices are often below typical used equipment prices. Feel free to contact us and tell us your packaging requirements. — Typically, 30–50 different new machines are available from stock with immediate delivery. For custom-made machines, we offer very short lead times from approximately 3 weeks. — All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Sample system with 10 automatic counting discs and a standard pouch packaging machine. Suitable for counting small parts such as screws, nuts, candies, nuts, etc., and for packaging programmable assortments into flat pouches or 3- or 4-side sealed bags. The number and size of the counting discs in the system can be customized (this sample system includes 10 counting discs!). - Specifications: Machine dimensions and total price depend on the required packing speed, the products to be packed, and the pouch size. Available in stainless steel and painted steel. - The price applies only to the sample system. Kedsv Nmhnspfx Aczenb Please note that our new prices are often below the usual used equipment prices. Feel free to inquire and tell us about your packaging requirements. - We typically have 30-50 different new machines available from stock at all times. For custom-built machines, we offer very short delivery times starting at approximately 3 weeks. - All machines are available with full warranty.

Leto izdelave: 2025, stanje: novo, Example system for portioning food products (catering companies, frozen foods, etc.). System designed for granular and powder products. Maximum machine cycle rate in idle mode: 40 cycles/minute; includes: 2 weighing units; 2 auger fillers; feeding modules (screw conveyor and Z-conveyor); platform; conveyor; vertical packaging machine, and checkweigher. – The system can be customised in various ways. Please provide your precise packaging requirements so we can prepare a complete quotation for you. – Final specifications are determined according to customer requirements. Ksdpfxsv Nmhue Aczenb Please note that our new machine prices are often below typical used equipment prices. Feel free to send us your inquiry and describe your packaging application. – We usually have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. – All machines come with a full warranty.

Leto izdelave: 2023, obratovalne ure: 20 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2022/02, Popolna proizvodna linija za EPS / Tovarna za proizvodnjo EPS blokov in izolacijskih plošč – skoraj nova Popoln, skoraj nov proizvodni sistem za EPS, ki je naprodaj – takoj na voljo na Madžarskem, v Evropski uniji. Ponujamo popoln industrijski proizvodni sistem za proizvodnjo EPS blokov in izolacijskih plošč. Proizvodna linija je bila uporabljena le v omejenem obsegu in je v odličnem stanju. To je priložnost za uveljavljenega proizvajalca ali investitorja, da pridobi popolno proizvodno enoto za EPS po bistveno nižjih investicijskih stroških v primerjavi s primerljivo novo enoto, brez dolgih dobavnih rokov in časov za uvedbo v obrat, ki so povezani z novo tovarno. Dve možnosti nakupa: 1. Popolna proizvodna enota, vključno z industrijskim posestvom Cena: 859.000 EUR + DDV Popoln proizvodni sistem se ponuja skupaj z industrijskim posestvom in infrastrukturo, ki je vključena v prodajo. 2. Popolna strojna oprema in proizvodni sistem brez posestva in zabojnikov Cena: 769.000 EUR + DDV Popolno strojno opremo in proizvodno opremo je mogoče kupiti tudi ločeno in jo premestiti v lastno proizvodno enoto kupca. Stanje in razpoložljivost Oprema je skoraj nova in je bila uporabljena le v omejenem obsegu. Popolna proizvodna enota je takoj na voljo in jo je mogoče pregledati na Madžarskem po predhodnem dogovoru. Tehnična dokumentacija in dodatne informacije so na voljo resnim potencialnim kupcem. Ključne prednosti Popoln industrijski proizvodni sistem za EPS Proizvodnja EPS blokov Proizvodnja EPS izolacijskih plošč Skoraj novo stanje Omejena uporaba Takoj na voljo Nahaja se na Madžarskem, v Evropski uniji Knsdpjz Alpmjfx Aczob Bistveno nižja investicija v primerjavi s primerljivo novo tovarno Ni dolgih proizvodnih časov Na voljo z ali brez industrijskega posestva Tehnična dokumentacija na voljo Možen pregled po predhodnem dogovoru Tehnični prenos in podpora se lahko dogovorita individualno Pomoc pri razstavljanju, pripravi za transport, namestitvi in uvedbi v obrat se lahko dogovori ločeno. Primerjava investicij Ocenjena nadomestna vrednost primerljivega novega proizvodnega sistema je približno 1,25–1,35 milijona EUR + DDV, odvisno od konfiguracije. Prodajna cena Popolna proizvodna enota, vključno z industrijskim posestvom: 859.000 EUR + DDV Popolna strojna oprema in proizvodni sistem brez posestva in zabojnikov: 769.000 EUR + DDV Samo resne povpraševanja. Podroben seznam opreme, tehnične specifikacije, fotografije, videoposnetki in dodatna dokumentacija so na voljo potencialnim kupcem. Proizvodno enoto je mogoče pregledati na Madžarskem po predhodnem dogovoru.

Stanje: potreben popravila (rabljeno), Leto izdelave: 2007, Valjčna profilirna linija za izdelavo profilov za suho-montažno gradnjo, brez hidravličnega agregata. Kodpfxozy Ekfj Aczjnb Lokacija: V naši delavnici

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 400 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2022LW160, Visokobrzinska linija za valjanje i profiliranje. Opremljena alatima za proizvodnju GELAN i SCHUCO metalnih profila koji se koriste u izradi PVC okvira za prozore. Brzina stroja do 55 m/min pri proizvodnji profila duljine 6 m. Maksimalna debljina obrađivanog materijala iznosi 2,5 mm. Promjer gornje i donje osovine 60 mm, razmak između postolja 360 mm, individualni mjenjač za svaku stanicu pokretan s dva kardana. Svaka stanica ima pogon na gornju i donju osovinu. 15 radnih stanica + dvije ravnajuće stanice (turske glave). Svi valjci alata imaju površinsku tvrdoću od 62 HRC. Svi pomoćni valjci i osovine koji dolaze u kontakt s materijalom su induktivno kaljeni na 58-62 HRC (valjci izlaznog stola i horizontalnog akumulatora). Sustav za izrezivanje u hodu (fly-cutting) sa servo pozicioniranjem (DELTA servo motor 7,5 kW + kuglični vijak + linearne vodilice). Duljina proizvoda se podešava putem HMI-a. Hidraulički sustav za rezanje. Izlazni stol s automatskim sustavom za izbacivanje, transport i razdvajanje profila (kontinuirana proizvodnja bez zaustavljanja). Horizontalni ulazni akumulator za lim omogućuje kontinuiranu, neprekinutu proizvodnju, opremljen pritisnim valjcima. Individualni pogoni. Dvostrani hidraulički odmotač. Opremljen kontinuiranim pisačem za označavanje (KONING, Njemačka). Automatski sustav slaganja nije montiran (vidi slike). Stroj ima cirkulirajući sustav hlađenja i podmazivanja na svih 15 stanica. Elektroničke komponente: SIEMENS (PLC, kontaktori), SCHNEIDER (kontaktori) i DELTA (tajvanski pogoni i servo). Knjdpjyw Rzaofx Aczjb Glavni elektromotori: SIEMENS Ležajevi: SKF Strojna konstrukcija je naprezanjem razlučena i glodana. Stroj je korišten u probnoj proizvodnji i obradio je samo 250.000 m materijala (stroj je praktički nov). Uređaj je instaliran i priključen na struju. Moguće je testirati rad stroja na lokaciji. Cijena je za stroj demontiran i utovaren na kamion. Uključena je kompletna detaljna dokumentacija za podešavanje alata za svaki profil (crteži za montažu valjaka). Model: LW160 Napon napajanja: 380 V Instalirana snaga: 73,5 kW (tijekom proizvodnje trake debljine 2 mm stroj troši samo 40% snage) Frekvencija: 50 Hz Težina: 16.500 kg Struja: 160 A Serijski broj: 2022LW160 Godina proizvodnje: 2022 Godina montaže na lokaciji: 2023

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Linije za proizvodnjo sadno-zelenjarskih izdelkov. Velik del opreme je novejši – iz let 2011 in 2014 – dopolnjen s starejšimi, robustnimi stroji, ki so se že dolgo in neprekinjeno uporabljali. Stroje prodajamo skupaj kot celotno linijo. Proizvodna zmogljivost linije (na primeru enega izdelka) – približno 1200 litrskih steklenic na uro (~1,5 tone na uro). Izraženo v dnevni proizvodnji: ~28.800 steklenic na dan, ~36 ton na dan. (I) Kaj je mogoče proizvajati na tej liniji: -Kompot (steklenice, steklenice) -Džeme in goste marmelade -Sokovi (polnjenje v steklenice, cevna pasterizacija) -Konzerve v pločevinkah (sterilizacija v avtoklavu) -Pasterizirani izdelki v steklenicah (kisle kumare, zelenjava, omake) (II) Tehnološka linija: 1. Odmerjanje izdelka – v vedra, steklenice (2 odmerjalnika) 2. Polnjenje – steklenice (polnilni stroj), pločevinke (odmerjalnik + zapiralni stroj) 3. Termična obdelava izdelka – kotel za kuhanje, izparniki (zgoščevanje soka/pireja), cevni pasterizator (tekoči izdelek pred polnjenjem) 4. Zapiranje embalaže – zapiralni stroji (steklenice, steklenice), pokrivanje 5. Sterilizacija / pasterizacija končne embalaže – avtoklav (pločevinke, steklenice), tunelski pasterizatorji (3 kosi) 6. Etiketiranje – etiketirni stroji za steklenice, steklenice in kartonske škatle 7. Skupno pakiranje – tuneli za segrevanje (termo skrčljiva folija), transporterji (III) Seznam strojev: 1. Etiketirni stroj za kartonske škatle 2. Tunel za segrevanje (termo skrčljiva folija) 3. Transporterji 4. Tunel za segrevanje 5. Etiketirni stroj za steklenice 6. Etiketirni stroj za steklenice/steklenice 7. Tunel za segrevanje x 3 8. Etiketirni stroj (brez nadzorne plošče) 9. Tunelski pasterizator x2 10. Odmerjalnik za vedra 11. Odmerjalnik + zapiralni stroj za pločevinke 12. Avtoklav Pleszew (2011) 13. Tunelski pasterizator 14. Odmerjalnik 15. Pokrivanje 16. Zapiralni stroj 17. Polnilni stroj za steklenice 18. Zapiralni stroj za steklenice 19. Odmerjalnik za steklenice x2 20. Cevni pasterizator 21. Izparnik x3 22. Kotel za kuhanje Skupna vrednost: 2.380.000 PLN = ~ 545.000 EUR (IV) Zakaj kupiti celoto: Knjdpoz Daatsfx Aczjb Popolna tehnološka linija – od odmerjanja do skupnega pakiranja – brez potrebe po iskanju manjkajočih elementov. Možnost prevzema z demontažo in transportom (po dogovoru). Oprema, ki je bila uporabljena v proizvodnji – dokumentirana zgodovina uporabe. Fleksibilna oblika prodaje: cela linija, ločene tehnološke enote (npr. sekcija za konzerve z avtoklavom, sekcija za polnjenje steklenic) ali posamezni stroji. Pogoji: Obisk je možen po predhodnem dogovoru. Transport in demontaža po dogovoru.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, največja gramatura papirja: 208 g/m², širina papirja (maks.): 350 mm, največja višina papirja: 500 mm, proizvodna zmogljivost: 4.500 enota/h, Brez minimalne cene – zagotovljena prodaja po najvišji ponudbi! Dražba linije za izdelavo brošur! TEHNIČNE PODROBNOSTI Zbirni stolpi Modeli: Horizon VAC-100a / VAC-100m Število stolpov: 2 Število postaj na stolp: 10 Sistem podajanja: Z vakuumskim podajanjem Napetost: 230 V Frekvenca: 50 Hz Poraba toka: 10,4 A na sekcijo Modul za spenjanje in zlaganje Model: Horizon SPF-200A Napetost: 230 V Frekvenca: 50/60 Hz Knsdpjzy Hhxefx Aczeb Poraba toka: 3,4 / 3,2 A Število spenjalnih glav: 2 Debelina brošur: do 4,5 mm Funkcije: Spenjanje z žico in zlaganje na pol Sprednji rezalnik Model: Horizon FC-200A Funkcija: Samodejno rezanje sprednjega roba Način delovanja: Delovanje v liniji s sistemom Horizon SPF-200A Kakovost reza: Visoko natančen rez Stroj za zlaganje Model: Horizon ST-40 Napetost: 230 V Frekvenca: 50 Hz Poraba toka: 4,7 A Funkcija: Samodejno zlaganje končanih brošur Proizvodna zmogljivost: maks. 4.500 brošur/h Postaje za podajanje: 10, razširljivo do maks. 60 Format papirja maks.: približno 350 × 500 mm Gramatura papirja: 52–208 g/m² Debelina spenjanja: maks. 2 mm pri spenjanju v hrbtu Obdelava: Zbiranje, spenjanje, zlaganje in zlaganje v eni napravi PODROBNOSTI O STROJU Števec izdelanih enot: približno 1.800.000 brošur OPREMA Zbirni stolp Horizon VAC-100a Zbirni stolp Horizon VAC-100m Modul za spenjanje in zlaganje Horizon SPF-200A Sprednji rezalnik Horizon FC-200A Stroj za zlaganje Horizon ST-40 V prilogi najdete podatkovne liste za posamezne komponente naprave, ki vsebujejo dodatne podrobne tehnične podatke.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Višina dovoda: 900 mm Širina dovoda: 300 – 800 mm Neželezne kovine: 0,6 – 0,8 mm ali 0,8 – 1,0 mm (navesti pred naročilom) Neželezne kovine: 1,0 – 1,2 mm (samo pri fasadnih profilih) Knodpexwxdgofx Aczob Jeklo (320 N/mm²): 0,55 – 0,70 mm Nerjavno jeklo: maks. 0,5 mm 3.830 mm x 2.045 mm x 1.275 mm 1.770 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Proizvodna linija za izolacijske plošče iz NBR in PVC za ekstruzijo gume / na voljo takoj Knedpfsy Exrpex Aczob Proizvodna linija je v odličnem stanju in je na voljo takoj, z zelo malo delovnimi urami. Komponente proizvodne linije: 1. Zhejiang Baina 150 20D, 1000 kg/h hladni vakuumski ekstruder (standard) 2. Zhejiang Baina EJ-PPF-150-04-00 stožčasta šoba (pnevmatska) 3. Zhejiang Baina 6 m infrardeča peč za strjevanje (širina 1000 mm) 4. Zhejiang Baina 6 m peč za strjevanje z vročim zrakom (širina 1140 mm) 5. Zhejiang Baina 6 m peč za strjevanje z vročim zrakom (širina 1440 mm) 6. Zhejiang Baina 6 m peč za strjevanje z vročim zrakom (širina 1600 mm) 7. Zhejiang Baina 6 m peč za strjevanje z vročim zrakom (širina 1800 mm) 8. Zhejiang Baina 6 m peč za strjevanje z vročim zrakom (širina 2000 mm) 9. Zhejiang Baina 6 m peč za strjevanje z vročim zrakom (širina 1800 mm – 2300 mm) 10. Zhejiang Baina 6 m peč za strjevanje z vročim zrakom (širina 2500 mm) 11. Zhejiang Baina 6 m peč za strjevanje z vročim zrakom (širina 2800 mm) 12. Zhejiang Baina 36M FF-SLX-02-00 (3-slojni, vsak 12 m) hladilni sistem 13. PCM avtomatski stroj za vzdolžno in prečno rezanje (2000 mm) 14. AC-15AD hladilnik za tekočine z 285-litrskim rezervoarjem za vodo Če ste zainteresirani, vam z veseljem pošljemo podrobno opis in ustrezne podatke.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Leto izdelave: 2019, Linija Dematic je razstavljena in pripravljena za transport. Datum proizvodnje: 2019/2020. Tehnična zmogljivost: – pretok tekočega traku od nadstropja do indukcijskih postaj – 1.800 kartonov na uro – pretok tekočih trakov od sortirnega stroja TTU do VAS in izhodnega sortirnega stroja – 1.560 kartonov na uro Enote za obremenitev: a) kartoni na notranjih tekočih trakovih: – povprečna teža 15 kg/karton, – dimenzije 600 x 400 x 400 mm, – teža od 1 do 30 kg/karton b) kartoni na izhodnih tekočih trakovih: – dimenzije 800 x 400 x 340 mm – brez pokrova – pokrov se namesti na koncu pred odpremo – teža od 1 do 25 kg/karton – povprečna teža 15 kg/karton Linija je opremljena z dvema sortirnima strojema TTU. Sortirni stroj TTU je kompakten, zato je idealen za uporabo v ozkih prostorih. TTU lahko sortira tako plastične vrečke kot kartone. Vsak sortirni stroj je sestavljen iz 2 vstopnih območij in 300 izhodnih mest. Dva povezana sortirna stroja imata 4 vstopne linije in 600 izhodnih mest. Kartoni na tekočem traku se identificirajo in ustrezno transportirajo v ustrezno cono na sortirnem stroju. Oprema sortirnih strojev: – 32 delovnih postaj s 16 zasloni – 16 nosilcev za zaslone – 20 RF pištol (10 na sortirni stroj) – 4 izhodna mesta za palete – strežnik SCS – 2 stroja za polnjenje kartonov Lantech in naprave za nanašanje lepila Robatech Knedjzxrtkepfx Aczeb – 2 dvigala Altek 700 kg, ki se nahajajo na zunanji strani vsakega sortirnega stroja. Dostop do platforme je zavarovan s sistemom Troax – ob vklopu dvigala ni možnosti vstopa na območje nakladanja zaradi elektromagnetne ključavnice. Poleg tega je platforma ograjena z varjeno mrežo. – 2 platformi Fischer – delovna postaja za 12 delavcev (po 6 na vsaki strani), opremljena s čitalniki črtnih kod Data Logic in monitorjem Beckhoff CP3716-1071-0010.

Leto izdelave: 2018, obratovalne ure: 350 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SPZ6M, POPOLNA PROIZVODNA LINIJA ZA EPS – FANGYUAN / ICI SIXEN – 2018 Popolna proizvodna linija za EPS, primerna za izdelavo oblikovanih izdelkov iz EPS, vključno s predhodnim razširanjem, oblikovanjem, možnostjo vstavljanja/oblikovanja v kalupu, skladiščnimi silosi, sistemom za hlajenje vode in opremo za proizvodnjo pare. Linija je bila kupljena nova leta 2018 in je bila relativno malo uporabljena. Trenutno je nameščena in jo je mogoče pregledati pred razstavljanjem. GLAVNA VKLJUČENA OPREMA FANGYUAN SPJ90A AVTOMATSKI PREDHOODNIK ZA SERIJSKO PROIZVODNJO Avtomatski predhoodnik za serijsko proizvodnjo EPS z nadzorom gostote, sušilnikom in transportnim sistemom. • Razširitvena komora: Ø900 mm • Razpon gostote: približno 12–90 g/l • Kapaciteta: do približno 720 kg/h, odvisno od gostote • Pritisk pare: 0,6–0,8 MPa • Priključna moč: 16,75 kW • Tipični cikel: približno 60–70 sek • Primerno za bel in siv EPS • Približno 16.000 kg skupno obdelanega EPS • Približno 800 proizvodnih ciklov FANGYUAN SPZ6M AVTOMATSKI STROJ ZA OBLIKOVANJE Posebna konfiguracija za oblikovane izdelke z vstavki / možnostjo oblikovanja v kalupu. • 6 pozicij na cikel • Dvojna komora za paro • Gibljiv dvojni sistem kalupov • Možnost oblikovanja v kalupu • Največja površina oblikovanja: 720 × 1270 mm • Največja posamezna pozicija: 330 × 250 mm za 6 pozicij • Največja globina: 180 mm • Čas cikla: približno 100–150 sek • Priključna moč: 13,5 kW • Teža stroja: približno 6.000 kg • Celotne dimenzije: približno 5000 × 5100 × 3700 mm • Zaslon na dotik Schneider / PLC Mitsubishi Ksdjz A Dxkjpfx Aczonb • Približno 350 skupnih ur delovanja FANGYUAN SPZ80K AVTOMATSKI STROJ ZA OBLIKOVANJE EPS Z VAKUUMOM Prvotno dobavljen kot SPZ900K. • Površina oblikovanja: 840 × 720 mm • Do 4 posamezne pozicije kalupov • Pritisk pare: 6–8 bar • Poraba pare: približno 6 kg/cikel • Stisnjen zrak: 1,2 m³/cikel • Hladilna voda: 40–120 l/cikel • Priključna moč: 10,6 kW • Približne dimenzije: 4500 × 1640 × 2700 mm • Približna teža: 4.000 kg • Približno 53.300 zabeleženih ciklov stroja SISTEM ZA SKLADIŠČENJE EPS • 6 × približno 25 m³ silosov • Približno 150 m³ skupne skladiščne kapacitete SISTEM ZA HLAJENJE VODE • Hladilni stolp približno 100 m³/h • 1 črpalka z nizkim pritiskom + 2 črpalki z visokim pritiskom • Filtri za vodo iz nerjavečega jekla Fangyuan DN150 SISTEM ZA PROIZVODNJO PARE Popoln evropski sistem za proizvodnjo pare je potencialno na voljo skupaj z namestitvijo, vključno z generatorjem pare ICI SIXEN 500 kg/h, gorilnikom za zemeljski plin Riello in pripadajočo dodatno opremo. Natančen obseg sistema za proizvodnjo pare, ki je vključen v končno prodajo, je mogoče dogovoriti s kupcem, saj se nekateri sestavni deli lahko obdržijo, odvisno od končne konfiguracije. DRUGE INFORMACIJE • Leto: 2018 • Oprema s certifikatom CE • Na voljo so priročniki in tehnična dokumentacija • Na voljo so fotografije in videoposnetki • Pred razstavljanjem je možen pregled • Prednostna prodaja kot celotna linija • Razstavljanje, natovarjanje, transport in ponovna namestitev se lahko dogovorijo ločeno • Kalupi niso vključeni, razen če se to izrecno dogovori Podrobna datoteka PDF z popolno tehnično opisom in specifikacijami opreme je naložena v razdelek Dokumenti te ponudbe. Ocenjena ekvivalentna cena za zamenjavo danes: približno 330.000–380.000 EUR.

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 500 mm, Ponujamo to dobro linijo za rezanje REAC 5.609 s pripadajočo linijo za pakiranje, izdelano leta 1995. Proizvajalec: REAC Model: 5.609 Leto izdelave: 1995 Stanje: dobro ID kategorije: 805 ID tipa: 1270 Vrsta stroja: Linija za rezanje s pripadajočo linijo za pakiranje Knjdoznxffjpfx Aczeb Širina vhodnega materiala: 500 mm Debelina materiala: 0,25–2,0 mm Teža zvitka na odvijalniku: 5.000 kg Teža zvitka na navijalniku: 2.000 kg Število rezov: 20–25 rezov (širina materiala 0,8 mm) Hitrost rezanja: 150 m/min Če imate kakršna koli vprašanja ali potrebujete dodatne informacije, nam lahko pošljete sporočilo ali nas pokličete.

Stanje: zelo dobro (rabljeno), Ponujamo vam tukaj profilno strojo Schlebach Miniproof Plus. Stroj je v dobrem stanju. Vsi valji so v redu. Takoj pripravljen za uporabo, pravi Porsche med profilnimi stroji. Kjdsz Drvaspfx Aczjnb Možna dostava, pošiljamo. Neto cena plus DDV. Na voljo je račun z navedeno vrednostjo DDV. Za dodatna vprašanja se obrnite na nas.