Dvosmerni stroji za lepljenje robov nakup rabljenega (69)

Stanje: zelo dobro (rabljeno), Double-sided – First machine in a production line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 100 / 1200 Control: PC-based, Windows / PC software / SINTRA Duodpfxju Rc Hyj Altew Feed speed (adjustable) m/min: 10 – 40 (INVERTER CNC) EDGING PROCESSING (for each side): Spray unit (for liquid non-stick agent) No. 2 hoggers DT 10 (5.8 kW x 2) Free space EDGEBANDING UNIT (for each side): 1st gluing station (hot melt + pre-melter) SP 30 (high melt + Edge Control EC 40) 2nd gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled) + edge magazine for rolls (no. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (2 x 1 kW) 0°–25° No. 1 universal routing unit for grooving/rebating/profiling EB 60 (1 x 5 kW) – ISO 30 motor Multi-profile scraper unit (CNC-controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 2.800 mm, največja debelina roba: 20 mm, model krmilnika: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hotmelt adhesive tank, pre-press for hotmelt adhesive Edge banding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sander (1 motor) Unit 7: Belt sander (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed chains: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT Djdpfxoyttrxo Alteuw CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDED SIZING AND EDGE BANDING LINE The line consists of the following machines: Dedpfjun N Dlsx Altjuw A) W06027 1st double-sided sizing and edge banding machine "IMA" Combima II /440 /A /R3 B) Rotation unit (90°) C) W06028 2nd double-sided sizing and edge banding machine "IMA" Combima II /190 /B /R3

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (optionally 3000) Cam pitch (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (adjustable): max. 60 m/min No transfer bar (Master & Slave systems) FORMAT PROCESSING (for each side): Spray unit (for liquid release agent) Jointing cutter unit 08.376 (4.5 kW x 2) Free space EDGE GLUING PROCESSING (for each side): Gluing unit (hot melt adhesive) 283.205 Edge pressure section. Edge magazine for rolls (No. 2 positions) End trimming unit 08.42 (0.2 kW x 2) 0°-25° (max. working speed 50 m/min, servo motor) Milling unit 08.055 (0.66 kW x 2) 0°-30° Multi-function unit (radius milling and contour milling) 08.342 (0.66 kW x 2) Spray unit (for polishing fluid) Free space (for optional scraper addition) Buffing unit 08.617 (0.18 kW x 2) Djdju Ekbnspfx Altouw

Stanje: zelo dobro (rabljeno), Double-sided stand-alone machine (or can be used as the 1st and/or 2nd machine in a production line). Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 60 mm Working width (min/max): 240 / 2500 mm Control: PC 22 Feed speed (adjustable): 10–40 m/min Cam pitch: 500 mm EDGE PROCESSING (for each side): - Protection milling unit (pre-milling): 1 x 4.5 kW (hydro) - Chipping aggregate KD 11 (2 x 8.1 kW) hydro Duedpfxslikydo Altjw EDGE BANDING UNIT (for each side): - Gluing unit (hot melt + pre-melter): A3 + A34 - Edge magazine for rolls (slot no. 6) - Edge pressure zone “C” - Pre-milling unit: 2 x 0.55 kW - Milling unit MF 20 (2 x 0.55 kW) 20° - Profile scraping aggregate PN 20 - Finishing unit (flat scraper + buffing aggregate) FA 11 Free space

Stanje: zelo dobro (rabljeno), Double-sided single machine (first machine in a production line) Edgebanding material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 240 / 1000 Control / software: NC 21 / Homatic Feed speed (adjustable) m/min high speed: 10 - 60 Safety and soundproof cabins PROCESSING AREA (per side): Milling unit KD 10 (2 x 6.6 kW) EDGEBANDING AREA (per side): Gluing unit (hot-melt glue + premelter) A3 + A34 (high speed package) Pressure zone Edge magazine for rolls (compartment no.) 2 Pre-milling unit 2 x 0.55 kW Milling unit 2 x 0.55 kW (0° - 30°) Finish unit (scrapers + smoothing unit) FA 11 Dsdpfx Aljifnxxsteuw Universal milling unit for grooving/rebating and profiling UF11 (1 x 4 kW) 0°-90°

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDE SIZING AND EDGE BANDING LINE, max. working width 2500 mm, equipped with automatic loading and stacking system, consisting of the following machines: X04004A) Loading gantry (with 2 loading stations) “BARGSTEDT” TBH 500/D/30/14 X04004B) Workpiece turning device (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDR31/25/12 Dusdpolikvhofx Altsw X04004C) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004D) Separation station “BARGSTEDT” X04004E) Double-sided sizing and edge banding machine “HOMAG” Model KFR 620/19/QA/25 X04004F) 1st boring machine “WEEKE” Model BST 500 D X04004G) 2nd boring machine “WEEKE” Model BST 500 D X04004H) Workpiece turning device (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDR 51/25/12 X04004I) Motorized transfer conveyor “HOMAG” TR 10/70/12 X04004L) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004M) Stacking gantry (with 2 unloading stations) “BARGSTEDT” Model TSP 420/40/30/12 BA

Stanje: dober (rabljeno), SQUADRABORDATRICE 1° E 2° DI LINEA CON CARICATORE A PONTE E GIRAPANNELLI MARCA: BIESSE MODELLO: STREAM SB2, CE DATI TECNICI * Altezza pannello min/max: 10 / 60 mm * Altezza bordo min/max: 15 / 65 mm * Spessore bordatura min/max: 0,3 / 3 mm * Sporgenza pannello dal nastro di avanzamento: 35 mm * Lunghezza minima pannello: 240 mm * Larghezza minima pannello: 240 mm * Velocità di avanzamento: da verificare * Collegamento pneumatico: presente COMPONENTI DELLA LINEA * Fresatrice * Doppio truciolatore * Gruppo incollaggio * Magazzino bordi a 6 posizioni * Gruppo intestatore * Gruppo refilatore sovrapposto * Gruppo spigolatore * Gruppo arrotondatore a 4 motori * Fresatrice * Gruppo raschiabordo * Gruppo raschiacolla * Gruppo phon * Gruppo spazzolatore * Controllo NC 410 AUTOMAZIONE Dodpfx Alovvcd Seteuw * Caricatore a ponte RBO modello SELECTA C, doppia stazione * Girapannelli a piatto RBO modello GP

Stanje: rabljeno, številka stroja/vozila: 008266, Tip pritrjene obrobe: tanka obroba, močna obroba Sistem lepljenja: EVA Multifunkcijska enota: da Stroj za obrobljanje robov: stroj 1 in 2 Največja širina panela: 3000 mm Dodpfjx A Hfijx Altouw Največja hitrost pomika: 25 m/min Delovne enote, desna stran: 9 kos Delovne enote, leva stran: 9 kos

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, številka stroja/vozila: AH/003306, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 3.200 mm, hitrost pomika os X: 40 m/min, TEHNIČNE PODROBNOSTI Mobilna širina odprtine: 3.200 mm Maks. širina panela: 3.200 mm Min. višina panela: 10 mm Maks. višina panela: 60 mm Debelina robnega traku v roli, najmanj PVC-ABS: 0,3 mm Debelina robnega traku v roli, največ PVC-ABS: 3 mm Podajalna hitrost: 10 - 40 m/min Duodpfxjxx N D He Altow Razdalja med vpotegnjenimi zatiči: 500 mm OPREMA Motoriziran pritiskalni gumijasti trak Nosilni transportni trak z vpotegnjenimi zatiči CNI krmiljenje v ločeni nadzorni omari Usmerjevalna enota z dvema motorjema (za vsako stran) Lepilna enota s predtalilcem za EVA lepilo Pritiskalni valji za robove Magazin za robove z dvema položajema Rezkalna enota z dvema motorjema Skupina za obrezovanje s prekrivanjem Stopničasta dodelovalna enota z dvema motorjema Obličevalna enota s 4 motorji Rezkalna enota nagibna 0-90° Enota za odstranjevanje robnih ostankov Krtačna skupina

Stanje: rabljeno, Double-sided edge banding machine, suitable for use in-line or offline as the first or second machine CNI control system located in a separate control cabinet Machine suitable for first and second panel pass Motorized mobile side opening via N.C., 3200 mm Maximum panel width: 3200 mm Panel height min. – max.: 10 – 60 mm Edge thickness in roll, min. – max., PVC-ABS: 0.3 – 3 mm Infinitely variable feed speed: 10 – 40 m/min Dedpokvrxqofx Altsuw Motorized pressure belt Conveyor track with retractable pins Distance between retractable pins: 500 mm Squaring section consisting of (each side): - Squaring unit with two motors Edging section consisting of (per side): - Gluing unit with pre-melter for EVA glue - Pressure rollers for edge banding - Edge material magazine with two positions - End trimming unit with two motors - Overlapping trimming group - Staggered finishing unit with two motors - Corner rounding unit with four motors - 0–90° tilting milling unit - Edge scraper unit - Brushing unit

Stanje: rabljeno, Leto izdelave: 2009, Numerical Control POWER CONTROL PC 22 Machine suitable for the first and second panel pass Mobile motorized shoulder opening via NC, 3000 mm Maximum panel height: 60 mm PVC-ABS edge thickness: 3 mm Feed speed: 40 m/min Feed speed with corner rounding: 20 m/min Motorized rubber pressure belt Support rail with retractable pin (distance between pins: 500 mm) Squaring section consisting of: Non-stick unit Dedpfx Alopp Tkfjteuw Time-controlled automatic chip guard unit Double trimming unit Space reserved for future group extensions Gluing unit with pre-melter and glue pot Automatic adjustment of pressure rollers for edging Edge holder magazine with 2 positions Trimming unit with two motors Overlapping cut-off unit Corner rounding group (FK) Scraper unit for edges Glue scraper unit Buffing unit Non-stick unit

Stanje: rabljeno, BIESSE STREAM SB2 10.5 double-sided edge banding machine, suitable for use as the first and second machine in a squaring and edge banding line. Numerical control with Sintra software. Machine suitable for the 1st and 2nd pass of the panel. Motorized mobile shoulder opening by CNC, 3000 mm. Panel height: 60 mm. PVC/ABS up to 3 mm. Infinitely variable feed speed via CNC (up to 40 m/min). Electronically adjustable working height via CNC (up to 60 mm). Electronically adjustable mobile shoulder opening via CNC. Motorized rubber belt with increased pressure. Support rail with covered pins – spacing between pins: 500 mm. Automatic system for supporting large panels. Dodpeu Rim Hjfx Altsuw Anti-adhesive unit. Squaring section, consisting of (per side): * Automatic, time-controlled anti-splintering unit * Double scoring unit * Double-motor trimming unit Edgebanding section, consisting of (per side): * Gluing unit for EVA hot-melt glue with premelter * Edge pressure unit for straight profiles with electronically adjustable pressure rollers via CNC * 6-position coil magazine with automatic edge changeover via CNC * Trimming unit with 2 motors and automatic tilting * Overlapping trimming group with 2 motors * Copying unit with 2 electronically adjustable tilting motors via CNC * Multifunction contour unit with 4 motors (trimming + contouring) with automatic numerical control * Milling unit (with 2 motors on fixed left side / 1 motor with 0-90° tilting on mobile right side) * Edge scraper unit electronically controlled via CNC * Glue scraper unit * Oscillating brush unit * Hot air blower unit

Stanje: rabljeno, Leto izdelave: 2013, Numerical control PC office with Widge Plus software Machine suitable for 1st and 2nd panel pass Motorized mobile shoulder opening via NC, 3200 mm Panel width min - max: 215 - 3200 mm Dujdpfxok Egvdj Altew Panel height min - max: 10 - 60 mm Edge thickness in coil, min - max (PVC-ABS): 0.3 - 3 mm Infinitely variable feed speed: 10 - 40 m/min Motorized pressure rubber belt Support track with retractable pins Pin height: 12 - 18 - 25 mm Distance between retractable pins: 500 / 400 mm Working units mounted on NC-motorized top tables Squaring section consists for each side of: Non-stick group Timed splinter guard automation Double milling unit Edging section consists for each side of: Gluing unit with pre-melter for PUR adhesive and pre-melter for EVA adhesive Edge pressure rollers, electronically controlled by NC Edge holder magazine with 6 positions Cutting unit with two motors Overlapping cutting unit Staggered trimming unit with two electronically NC-controlled motors Corner rounding unit with 4 motors 0-90° swiveling planer group, electronically CN-controlled (mobile shoulder) 0-90° tilting milling unit + dual stacked milling spindle (fixed shoulder) Anti-adhesive groups Edge scraper unit Glue scraper group Brushing unit Phon (sound insulation) group

Stanje: rabljeno, Numerical control with NC 410 software Machine suitable for the first pass of the panel Motorized mobile shoulder opening by CNC, 1500 mm Panel height 60 mm PVC/ABS 3 mm Infinitely variable feed speed Electronically adjustable working height by CNC Motorized rubberized belt with superior pressure Squaring unit consisting of (on each side): * Double pre-milling unit * Automatically timed anti-splintering unit Duodpfjrxzb Usx Altow Edge unit consisting of (on each side): * Gluing unit for EVA hot-melt adhesive with pre-melter * Pressure roller unit for straight profiles with adjustable pressure rollers * 2-position coil magazine with automatic edge change * Overlapping trimming unit with 2 motors * Picking unit with 2 tilting motors * Scraping unit tiltable from 0-90° * Edge scraper unit * Glue scraper unit * Belt sanding unit * Brush unit

Stanje: rabljeno, Leto izdelave: 2002, Dvostranski softforming stroj za lepljenje robov HOMAG tip Power KF 20/34/QE/30 Duodoyyxc Rjpfx Altsw Št. stroja 0-202-25-8815, Letnik 2002

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 50 mm, širina obdelovanca (maks.): 2.500 mm, dolžina obdelovanca (maks.): 200 mm, največja hitrost vrtenja: 18.000 obr/min, Oprema: CE označba, TECHNICAL DETAILS Maximum panel width: 2,500 mm Minimum panel width: 130 mm Maximum panel height: 50 mm Minimum panel height: 8 mm Maximum panel length: 200 mm Minimum panel length: 30 mm UNITS Format Cutting Unit Unit: Corrections automatic adjustment by time Motor power: 2.2 kW Max. speed: 6,000 rpm Magazine for coil Number of positions: 1 Gluing system Glue pot for polyurethane adhesive Prefeeder for polyurethane adhesive Prefeeder for polyurethane adhesive D4-e Edge pressure roller conveyor Number of pressure rollers: 4 Edge Processing Unit 1 Unit: Top-mounted router Number of motors: 1 Motor power: 0.7 kW Max. speed: 18,000 rpm Edge Processing Unit 2 Unit: Top-mounted router Number of motors: 1 Motor power: 0.7 kW Max. speed: 18,000 rpm Edge Processing Unit 3 Unit: Hot air blower Model: APPLICATORE DI FILM Motor power: 0.1 kW Edge Processing Unit 4 Unit: Brush Number of motors: 2 Edge Processing Unit 5 Unit: Top-mounted router Number of motors: 1 Edge Processing Unit 6 Unit: Top-mounted router Dusdjxxavtepfx Altjw Number of motors: 1 MACHINE DETAILS Total installed power: 12 kW Glue system: PUR Press type: rubber-coated belts Number of units installed in format cutting: 1 Number of units installed in edge processing: 6 EQUIPMENT Spraying unit CE marking

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Stefani Ibimatic Double Edge Bander Year: 1998 S/N: NH 002993 Manufacturer: Stefani S.p.A., Italy Edge Banding min / max: 14-65 mm Edge thickness min: 0.3 mm Max ABS size: 3 x 35 mm Panel thickness min / max: 60 mm Panel size: 220-3200 mm Working edge: 30-75 mm Distance between edges: 400 mm Adjustable feed speed: 6 to 36 m/min Units: 1+1 Front Milling Units, 4 kW, pneumatic 1+1 Air jet for workpiece cleaning 1+1 Gluing station / hot melt adhesive unit GR_HMP-P HM-P EDGEBANDING UNIT FOR STRAIGHT EDGES This unit is designed for edgebanding of straight edges using a hot-melt adhesive with a removable tank including a pre-melter for rapid glue melting The unit includes: A Adhesive tank B Strip storage table C Pneumatic device box D Support base for strip storage E Guillotine shear F Side pressure device G Glue unit tilting H Mobile table top 1+1 Edgeband feed unit, 5 stations 1+1 End trimming unit 0.35 kW, 12,000 rpm 1+1 Corner rounding unit, 1 kW, 12,000 rpm Djdjtrgy Njpfx Altjuw 1+1 Chamfer milling unit, 0.5 kW, 12,000 rpm R14/R25, diameter 80 mm, 12,000 RPM 1+1 Corner rounding head with two 0.35 kW motors 1+1 Milling unit, 4 kW, right side, left side free space (U28+U55), diameter 125 mm, 12,000 rpm 1+1 Self-adjusting scraper RCA 95 1+1 Brush / buffing unit 0.29 kW, 1500 rpm SPO (150/50 x 50 mm) 1+1 ABS tape color enhancer, 1600 W

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, NOVA CENA! Proizvajalec: HOMAG Model: KFL 10/22/QE/CF Tip: Dvostranski stroj za formatiranje in lepljenje robov Leto: 2000 Stanje: Priklopljeno, možnost testiranja. Lokacija Litva Osnovni stroj Debelina obdelovanca: 12...60 mm Širina obdelovanca: 70... mm Previse obdelovanca na transportni verigi: 40 mm Podajalna hitrost: 10...40 m/min Poraba energije Glavni pogon: 3...75 kW Višinsko nastavljanje: 0,2 kW Glavni pogon stroja Dedpfsuggpzsx Altouw Podajanje: 6...30 m/min Poraba: 2,2...6,9 kW Lepljenje Tip robu: Ravni in softforming robovi Višina robnega materiala: 16...65 mm Največja hitrost podajanja: 60 m/min Kontura, rezalna enota CF/CS 10/11/12 Izpustni ventil HMA 1 Talilna enota HMG 12-1x1-M-HO Lepljenje za predoblikovane dele Tip roba: Ravni robovi, bobnasti profili Robni material: Trak iz role Enota za rezanje profilov WK 46 Krožna žaga (premer 80 mm, širina reza 3,2 mm, izvrtina 34 mm, število zob 20) Enota za poravnavanje in strganje za predoblikovane dele Polirna enota za predoblikovane dele Specifikacije in postavitve na zahtevo