Oliver Fritz Gmbh & Co. Kg Tfpa15.250.M nakup rabljenega (120.354)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30214501, stružna dolžina: 2.000 mm, skupna dolžina: 12.000 mm, WFL Millturn M60-G/2000 WORKING RANGE Centre distance mm 2000 Swing diameter over cross slide mm 480 MAIN DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 60 Max. spindle speed rpm 2600 Max. spindle torque 100% duty cycle Nm 2748 COUNTER SPINDLE DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 40 Max. spindle speed rpm 3300 Max. spindle torque 100% duty cycle Nm 1830 Ksdpfx Aleu Hl R Te Nsdk TOOL CARRIER (Single tool carrier, turning-milling-drilling unit) AC drive, drive power 100% duty cycle kW 25 Max. spindle speed rpm 4000 Max. spindle torque 100% duty cycle Nm 300 Travel perpendicular to X/Z (Y-axis) mm 300 [-125/+175] Swivel angle of milling spindle (B-axis) ° -110/+90 Spindle nose for tools according to DIN 69893 HSK-A63 Spindle diameter at front bearing mm 100 DIMENSIONS Length (max. tool magazine with chip conveyor) m 11*12 Width/height m 4.2/3.5

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, nosilnost: 4.000 kg, dvižna višina: 10.000 mm, napetost baterije: 48 V, lastna masa: 9.000 kg, Splošno: HUBTEX 2125-PU/SO z modelom MQ 40 je električni večsmerni bočni viličar s nosilnostjo 4 tone in prečno kabino. Ta viličar je primeren za skladiščne prostore, kjer sta potrebni maksimalna prilagodljivost in okretnost v ozkih prehodih za premikanje tovora do 4000 kg. M = večsmerno krmiljenje Q = prečna kabina 40 = 4.000 kg 2125 = serija PU = Vulkollan pnevmatike SO = nagibanje in spuščanje vilic, izvlečne vilice do 1500 mm, hidravlično nastavljiva širina vilic Kdedpfx Alex Aqaqj Nok Dodatna oprema/Predelava: - Kameri na desni in levi strani vilic z monitorjem v kabini - Pozicijski laser na desni in levi strani vilic - Mehko gibanje pred odlaganjem vilic in pri prečkanju stopnic teleskopskega izvleka

Stanje: novo, Leto izdelave: 2025, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC Kdodjndn Agspfx Al Nsk • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with free-standing bending head can be easily converted for complex geometries to switch between right- and left-hand bending. The plug-in bending tools allow for quick changeover to other tube sizes. A fast hydraulic system reduces auxiliary processing times, which is a key factor in series production. The clamping pressure for the tube hold-down is adjustable for optimal results. The PLC control unit (freely expandable via USB stick) with data storage and the latest X2X interface can store almost unlimited numbers of programs for bending angles, lengths, and rotational angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers two operating modes: In “Simple Bending,” the lengths and rotations of the bends relative to each other are automatically displayed. In “Controlled Bending” mode, the data is pre-set, and a continuous target/actual value comparison is performed during bending. Kdjdpsng Exajfx Al Nek This design eliminates positioning errors within a tolerance window, significantly minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early on reaching the bending angle. The compact drive unit with detachable mandrel holder provides advantages for on-site installation as well as for special designs with very large tube feed, and is also available as a stationary version with a tool and mandrel bar organizer. The affordable alternative to a fully controlled CNC machine. POSSIBLE APPLICATION AREAS: • Hydraulic piping installation • Pipeline construction • Plant engineering, e.g. chemicals • Metal construction • Prototype manufacturing Technical Data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bend radii: 1.5 x Ø (standard 2 x Ø) • Multi-functional machine controller, bending angle setting (0.1°) • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions longer on request) • Maximum 180º bend result • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-based tool monitoring for monitoring clamping pressure • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Test production welcome at our in-house demo room • Consultation and information session on your premises • Leasing/financing support and processing through JUTEC • Trade-in of your existing machine • Service contracts, maintenance on site

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Natančen navijalni stroj za folije in tračne materiale. Namenjen za enakomerno odvijanje, vodenje in navijanje zvitkov. Integrirana varnostna zasnova z zaščitnim steklom, laserskim kazalcem začetne točke (zelena), zasilnimi stikali in pnevmatskim vodilom za folijo. Jeklen okvir stroja, pogon električno reguliran. Idealen za proizvodne linije v tehnologiji nanašanja premazov ali laminiranja. Kdsdpfx Aoxzuiyjl Nsk

Leto izdelave: 1992, stanje: rabljeno, Plate heat exchanger for milk processing Kdedpfeh Eulgsx Al Nsk

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible Ksdpfx Alenh R Eke Njdk • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site Kdjdpenfvx Nefx Al Nek • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending of pipes up to an external diameter of 100 mm, both stationary and directly at the installation site. Transport is easy using a pallet truck or the optional rollers. A robust three-phase motor and a precision gearbox provide high-performance drive power. The machine impresses with its compact and slim design and a very open bending area. Precise position sensing directly on the bending axis ensures optimal bending accuracy. The bending angle is quickly and easily set via a convenient, menu-guided user interface in 14 languages with touchscreen control, guaranteeing highly intuitive operation. For complex bending tasks, up to 100 bending programs can be stored, each featuring a sequence of up to 8 bends per geometry. Thanks to the multifunctional control system, both forward and return bending speeds can be variably set, and an adjustable overbend function compensates for the material’s springback. With the help of four material characteristic curves, the machine automatically overbends the material to the required angle, delivering precise results. The “stationary tube, rotating tool” principle minimizes the required workspace. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to achieve minimal deformation—ideal for stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent without issue. Using the small-radius bending device (KBV), extremely small bending radii are possible. POTENTIAL APPLICATIONS: Kdedendk N Ajpfx Al Njk • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series, with bending radius from 45 mm, incl. 40 mm hex shaft • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Small-radius bending device KBV • Special tools according to customer specifications • Software customization for special tasks OUR SERVICES: • Welcome to carry out test production in our in-house demo room • Consultation and information meeting at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with manual eccentric quick-release clamping for tube fixation enables efficient bending operations. The compact drive unit with detachable mandrel support offers advantages during on-site installation. Direct position detection on the bending axis ensures optimum bending precision. The bending angle can be set quickly and easily via a convenient touchscreen controller with a user-friendly, menu-driven interface. The advanced control system allows for two speed settings as well as a configurable overbending feature for compensating material springback. The bending process is significantly shortened by the automatic “return” movement at the end of the bend. For more complex bending tasks, bending programs can be stored, offering up to 50 bend angles per geometry. An almost unlimited number of programs and up to 200 materials can be saved to the controller or a USB stick. Plug-in bending tools allow for fast changeover to different tube sizes. For challenging geometries, the machine can be converted as standard to either right-hand or left-hand bending directions. The open bending unit also allows for bends such as railing frames with only a single weld seam. Optional PC calculation software determines the cut length for the entire geometry as well as the feed path, twist, and bending angle for every individual bend. The mandrel retraction is programmable and can be automatically triggered once the predefined bending angle is reached. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical industry • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: Kdjdpfonfvy Uox Al Nek • Bending capacity: Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm / 140 mm • Bending radii: 2 x D • Multifunction machine control for bending angle adjustment (0.1° accuracy) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions are available with longer lengths) • Maximum bending result: 180º • Weight: 300-500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measuring system for length and twisting (resolution 0.1) • Remote control of all functions at the carriage (rotational and length stop) • Bending radius up to 250 mm • PC tube calculation software OUR SERVICES: • Welcome to trial production in our in-house demo room • Consulting and informational meeting at your premises • Consultation and processing of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: • Hydraulic piping installation • Prototype fabrication Kdjdsng Amkjpfx Al Nek • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation • Maximum bending angle: 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Machine case • Length stop OUR LOCAL SERVICE FOR YOU: • Welcome to test production at our on-site demonstration room • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of this compact and mobile horizontal bending machine was clearly focused on the production of dimensionally accurate spirals, such as handrails for spiral staircases. This represents the highest level of complexity, as two interdependent variables (radius and pitch) must come together in a single bend to create a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and monitoring with measuring devices, including final corrections of bending parameters, ensures accurate bending. With just a few simple entries in the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for machine operation. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power connection. Both hardened steel tools and surface-friendly, hard plastic tools are available. To ensure optimal feed, even for tight bending radii, all three bending rollers are driven. The drive concept proves its worth in daily heavy-duty use, whether working on flat surfaces or bending pipes and profiles. Customers of the 4800, 5000, and 6000 bending systems have the option of purchasing the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this configuration, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/underrails for spiral staircases • Large pipe and profile bends • General metal construction Kedpfxeng A R Ss Al Nodk TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Site-ready 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – to produce controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch based on twist • MPW – PC calculation program for determining the correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm in height • Tools for special profiles OUR SERVICE FOR YOU ONSITE: • Welcome to test production at our facility in the demo room • Consulting and information session at your location • Consultation and processing of leasing/financing purchases • Service contracts, onsite maintenance

Stanje: novo, Leto izdelave: 2025, THE COST-EFFECTIVE MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system offers solutions for complex geometries with standard radii of 2xD for tube dimensions from 20 - 90 mm. Depending on the material quality and wall thickness ratio, radii of 1.5xD are also feasible for series production. With a tool height of 120 mm, there are also ample possibilities for special profiles. The highly precise and powerful electric drive of the bending axis, as well as the stable and robust construction of the mandrel carrier and bending arm, contribute to the desired bending results. Quick-change bending tools allow rapid conversion to different tube dimensions. The clamping pressure for tube securing is optimally adjustable. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store virtually unlimited programs for bend angles, lengths, and rotation angles for up to 50 bend sequences per tube. For monitoring spring-back values, a freely programmable database is available for up to 200 materials. The control offers two operation modes: In "Simple Bending", tube segment lengths and rotation are automatically displayed in relation to each other. In "Controlled Bending" mode, data is entered beforehand and a continuous target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gearbox-assisted positioning for length and rotation. POTENTIAL APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metalworking • Prototype construction • Piping installation TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Bending radius min/max: 40 mm / 250 mm • Minimum bending radii: 1.5 x Ø (Standard: 2 x Ø) • Multifunction machine control for angle adjustment (0.1°) • Mandrel bar lengths: 3000 / 4500 / 6000 mm • Maximum 180º bending result • Weight: 1600-3200 kg (depending on version) • Ergonomic operation via safety foot pedal OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Positioning of length and rotation via automatic brake function or manual stops using foot pedal • Semi-automatic length and rotation positioning using servomotors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB Kjdpfxenh R Sus Al Njdk OUR SERVICE: • Welcome to perform test production at our in-house demo room • Consultation and information meetings at your site • Leasing/financing advice and processing via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox ensure a robust drive. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle can be set quickly and easily via a user-friendly, menu-driven touchscreen interface that ensures even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, each with an angle sequence of up to 8 bends per geometry. The multifunction control allows for variable adjustment of the bending speed for forward and reverse operation, and features a parametrizable overbending function to compensate for material spring-back. By using four material characteristic curves, the material is automatically overbent to the required bending angle, ensuring an accurate bending result. The "stationary pipe, rotating tool" principle ensures a minimal footprint during bending. For thin-walled pipes, sliding shoes are used to achieve wrinkle-free bends and to bend curves with minimal deformation from materials such as stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square and round bars can be bent effortlessly. The KBV small radius attachment enables extremely small bending radii. POSSIBLE APPLICATIONS: Kjdpsng Ax Sjfx Al Nsdk • Plant construction • Hydraulic tubing • Meander bending • Prototype construction • Sanitary and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Minimum/maximum bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunction machine controller, bending angle setting (0.1° precision) • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • PB20 profile bender – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • RB43 roller bender – The RB43 is mounted on the hexagonal shaft of the bending axis. By switching to continuous bending, the bending system functions as a drive unit. • KBV small radius attachment • Special tools according to specification OUR LOCAL SERVICE FOR YOU: • Welcome to conduct test production in our in-house demo room • On-site consultation meeting • Advice and processing for leasing/financing purchases • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, nosilnost: 5.000 kg, debelina vilic: 80 mm, širina vilic: 180 mm, Telescopic crane 5,000 kg at a load center of 600 mm Telescopic length at hook: 3,600 mm with 950 kg payload Load capacities for different load centers: see load chart One swivel hook with 5,000 kg load capacity including shackle One swivel hook with 3,000 kg load capacity including shackle Height adjustable by pin locking system Kodpfjiuh I Aox Al Nedk Galvanized locking pins, secured with wire Fork pockets suitable for forks up to 180 x 80 mm Safety chain to prevent the crane from slipping off

Stanje: dober (rabljeno), Leto izdelave: 1997, The photo shows a Fanuc Series 0-M (a popular CNC controller used in the 1980s/90s). It supports X, Y, Z axis interpolation and has a tool magazine. CRT display, classic keyboard with physical buttons 3. Electrical Specifications (nameplate) Power supply: 3-phase, 380 V, 50 Hz Control voltage: (not readable, but standard Fanuc is 110/220 V → transformer) Auxiliary voltage: 24 V Protection: 16 A (flink) Electrical diagram number: 711 792 01 01 4. Machine Construction Vertical CNC machining centre (milling machine) with a closed enclosure. Worktable with a hole grid for fixing components. Carousel tool magazine (visible in the photo) – typically 12, 20, or 24 tools (depending on the version). Automatic Tool Changer (ATC). Z axis operates vertically (visible guideway assembly and bellows type way covers). 5. Typical Technical Data (for Chiron FZ 12/15 machines from this period) (values may vary depending on the model, but these are approximate parameters): Travels (X/Y/Z): approx. 500–700 / 400 / 400 mm Table surface: 800 × 400 mm (example) Table load capacity: 200–300 kg Spindle speed: 20–6000 rpm (some versions up to 8000 rpm) Spindle taper: SK 40 (DIN 69871) Spindle drive: 7.5–15 kW (depending on version) Tool magazine: 12–24 tools Positioning accuracy: ±0.005 mm Kdjdpfx Alsw Uab Aj Nsk Rapid traverse: 30 m/min (X/Y/Z axes) 6. Applications Metal machining (steel, aluminium, cast iron, light alloys). 📌 General Data: • Manufacturer: CHIRON, Germany • Type: CNC machining centre • Control: visible in photo (Fanuc Series 0-M) • Automatic tool changer • Robust worktable with clamping options • Stable, industrial design 📌 Condition: • Used machine, in good condition • Regularly serviced • Normal signs of use visible • Fully functional 📌 Applications: • Precision milling • Machining metal components • Single-part and series production

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Kodpfx Ajyz Af Esl Nedk Shear-edge ejector with 121 kN press force Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Length of goose neck: 1,550 mm Inclination: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. We would be pleased if this or one of our other balers is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: rabljeno, kapaciteta rezervoarja: 8.750 l, GÉNÉRAL Ksdpsycktrjfx Al Nsdk Forme : rectangulaire Remarques : Chaque cuve dispose de 2 plaques de refroidissement à l'intérieur ; 1 trou d'homme d’environ 300 x 400 mm en fond frontal ; pieds équipés de vis à calotte mobiles et réglables en hauteur (éventuellement pas complets pour tous les pieds ; les calottes n'ont pas été prises en compte dans la hauteur totale, celle-ci s’élèvera en cas d’utilisation) ; les pieds sont légèrement décalés. Largeur totale : 1 620 mm Hauteur totale : 2 700 mm Longueur totale : 2 950 mm Chauffage/Refroidissement : présent Localisation : Brême Plaque signalétique : Volume : 8 750 litres Matériau en contact avec le produit : V2A 1.4301 (AISI304) État : occasion Dernière utilisation : stockage de vin CUVE Type de support : sur pieds Nombre de pieds : 4 pcs MANTEAU CHAUFFANT/REFROIDISSANT Tempérage intérieur : plaque de refroidissement ÉQUIPEMENT Vidange : DN40 DIN 11851 QUALITÉ DES MATÉRIAUX Matériau du système de tempérage : inox Matériau des pieds : inox

Stanje: rabljeno, Leto izdelave: 1991, consisting of: - SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m²) - Feed tank 1,200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l compensation tank - Shell and tube heat exchanger - Compressed air reduction station - Control cabinet with operator panel Machine (additional description): Juice heating system for pasteurization Capacity: 100 hl/h Permissible operating pressure (PWT): 16 bar, test pressure 20.8 bar Heat exchange surface: 21 m² Length: 5.6 m Kjdpfx Aljvcqy Ue Nedk Width: 2 m Height: 2.4 m Control / Operation: Control cabinet with push-button operation Material: Stainless steel Base construction: Frame Equipment: 2 x tanks; Plate heat exchanger; Shell and tube heat exchanger; 2 x product pumps; Measuring, sensor and control technology, various valves and other fittings

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 6034, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 450 mm, pomik po osi Z: 590 mm, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 25 m/min, hitri pomik na osi Z: 25 m/min, nazivna (navidezna) moč: 45 kVA, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: Bahnsteuerung iTNC 530, skupna višina: 2.900 mm, skupna dolžina: 12.500 mm, skupna širina: 4.810 mm, skupna masa: 14.000 kg, hitrost vretena (min.): 100 obr/min, največja hitrost vretena: 12.000 obr/min, obratovalni tlak: 7 letvica, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN contouring control iTNC 530 • 4 axes • Travel paths X / Y / Z axes: 7200 / 450 / 590 mm • Working area X / Y / Z axes: 7000 / 400 / 350 mm • Weight: 14 t Equipment - Robust base structure as a welded frame construction - Linear ball guideways on all axes - Milling spindle unit: 100 - 12,000 rpm, tool holder SK 40 Drives: - X-axis (50 m/min) by rack-and-pinion drive - Y/Z axes (25 m/min) by ball screw drive - B-axis 9,000°/min - Swiveling operator panel - Automatic central lubrication - Traveling tool changer for 12 tool holders SK 40 - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication Technical Data - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar Kodsyzxfnepfx Al Nodk - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse: X-Y-Z 50 – 25 – 25 m/min - Infinitely variable feed: 0 – 5,000 mm/min - Tool change: disc changer with 12 tool stations SK 40 - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant system: emulsion, 300 liters - Spindle speed: 100 – 12,000 rpm - Speed correction: 80 – 120% - Drilling capacity in St 60 / Al: up to 28 mm Ø - Thread cutting capacity in St 60 / Al: up to M24 - Position measuring system: rotary encoder/length measuring system - Positioning accuracy: 0.025 mm - Repeatability: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel paths X / Y / Z axes: 7,200 / 450 / 590 mm - Working area X / Y / Z axes: 7,000 / 400 / 350 mm - Space requirement with safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 t - Sound emission: average sound pressure level 79 dB (A)

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 40.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 88 t, širina odprtine za polnjenje: 990 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, skupna masa: 23.000 kg, kapaciteta rezervoarja za olje: 2.000 l, moč: 90 kW (122,37 KM), volumenski pretok: 643 m³/h, Good day, We hereby offer, without obligation, a used baling press including conveyor belt, wire tying stations, and bale chute, manufactured by HSM GmbH + Co. KG, model VK 8818 FU. Kodoymmtcjpfx Al Nsdk The following technical data have been taken from the manufacturer's operating manual and brochures, for which we do not assume any liability for accuracy or completeness. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours (as of July 2025) Main press force: 880 kN Specific pressing force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions including conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used at a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced by a new, larger press in May/June 2026. Until then, the machine can be viewed in operation with material feed. We would be pleased if this press is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 150.050 h, Funkcionalnost: popolnoma funkcionalen, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC530, premer vrtljive mize: 500 mm, skupna masa: 13.000 kg, največja hitrost vretena: 14.000 obr/min, delovne ure vretena: 6.950 h, dovod hladilne tekočine: 20 letvica, nos vretena: HSK 63, število mest v zalogovniku orodij: 60, Oprema: ločilnik oljne meglice, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, • Stanje: vrhunsko stanje • Delovne ure: 6.950 Kdjdpsx Hg Ibofx Al Nok • KESSLER-rotacijska miza, Ø 500 mm • Zaloga orodij: 60 postaj, HSK-A63 • Notranje dovajanje hladilne tekočine: 20 barov, s tračnim filtrirnim sistemom • Hladilni sistem: samodejni nadzor nivoja hladilne tekočine • Zrak skozi vreteno • Merjenje orodij: BLUM laserski merilni sistem za orodja • Merjenje obdelovanca: infrardeče tipanje obdelovanca (3D tipalni sistem), vključno s pripravo za merjenje obdelovanca • Nadzor trkov: POS DCM modul • Dovod medijev: 3-kanalni dovod medijev v sredini mize • Opazovanje: rotacijsko opazovalno okno • Ročno kolo Prosimo, pošljite nam neposredno povpraševanje na naši spletni strani, če vas zanima stroj. Iz tehničnih razlogov je neposredno povpraševanje za ponudbo prek zunanje platforme težavno in možno le z zamudo.

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 15.606 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.050 mm, dolžina polnilne odprtine: 1.250 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 700 mm, teža bale: 500 kg, moč: 30 kW (40,79 KM), volumenski pretok: 160 m³/h, Good day, We hereby offer you, without obligation, a used baling press from Presto GmbH & Co. KG, model HPK 50 B. The following technical data has been taken from the manufacturer's operating manual and brochures, for the accuracy and completeness of which we cannot assume any liability. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions with a bulk density of 60 kg/m³: approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been repaired in our workshop (main control valve on the hydraulic block renewed) and tested during operation in both manual and automatic modes. The machine documentation is available in German. Inspection of the press is possible in our workshop by appointment. Kdedpfxeyplwfs Al Njk We would be pleased if this machine is of interest to you. Your Service Team Mertens & Frowein GmbH

Leto izdelave: 2015, stanje: rabljeno, Nevtralizacija odpadne vode Kapaciteta: 8 m³/h Kodpfxoxbqr Ds Al Nedk Upravljanje / Krmiljenje: Stikalna omara z zaslonom na dotik / WAGO Oprema: Nevtralizacijska posoda (37 hl); Končna kontrolna posoda (4,5 hl); Posoda za lug; Posoda za kislino; Črpalke; Merilna, senzorska in regulacijska tehnika; Stikalna omara

Leto izdelave: 2021, obratovalne ure: 60 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: X620DM-WL, We are selling a high-quality industrial videoscope. As plant engineers, we used this device to inspect weld seams inside pipelines. It delivers excellent image quality and is very easy to operate. Kdsdpfxeu Ul A Ns Al Nek Unfortunately, the probe length of 2 metres is no longer sufficient for our applications, so we need to sell it and purchase a model with a longer probe. The unit is only 3 years old. Original order confirmation details: Portable video endoscope, VTec X series - Forward or side view, white light - State-of-the-art CMOS camera technology - Bright, high-resolution 5.5" handset display Probe diameter: 6.1 mm +0.1 Probe length: 2.0 m Viewing direction: 0° / 90° Depth of field: 7 - 80 mm / 3 - 30 mm Field of view: 100° / 90° Illumination: White light, front LED, 3.22 lm; white light, side LED, 6.45 lm Camera resolution: Front 1280 x 960 px; Side 1280 x 960 px Monitor resolution: 1920 x 1080 px Articulation: ≤ 150° ±10 Articulation control: 4-way motorised joystick Power supply: Four 18650 Li-Ion batteries with protection circuit or mains adapter Operating conditions, protection class, weight: Hand unit: -10°C to +50°C, IP54, 1.50 kg Probe: -20°C to +70°C, IP67 Scope of delivery: - VTec X620DM-WL video endoscope - SD-USB memory card reader - HDMI cable - Mini USB data cable incl. USB power adapter - Battery charger incl. power adapter - Power adapter - Four 18650 Li-Ion batteries with protection circuit - User manual - Carrying case Rigid over-sheath with hand grip for 6 mm videoscopes Working length of sheath: 350 mm Including 1/4" tripod thread mount