Balairka
HSM GmbH + Co. KG VK 8818 R-FU

Name: HSM GmbH + Co. KG VK 8818 R-FU
Brand: HSM GmbH + Co. KG
Availability: InStock

Leto izdelave

2015

Stanje

Rabljeno (popolnoma funkcionalen)

Lokacija

Ungarn

Podatki o stroju

Oznaka stroja:: Balairka

Proizvajalec:: HSM GmbH + Co. KG

Model:: VK 8818 R-FU

Leto izdelave:: 2015

Stanje:: zelo dobro (rabljeno)

Funkcionalnost:: popolnoma funkcionalen

Obratovalne ure:: 20.331 h

Cena in lokacija

Lokacija:: Ungarn

Pokliči

Tehnične podrobnosti

Stiskalna sila:: 100 t

Širina odprtine za polnjenje:: 970 mm

Dolžina polnilne odprtine:: 1.800 mm

Dolžina bale:: 1.200 mm

Širina bale:: 1.100 mm

Višina bale:: 750 mm

Teža bale:: 750 kg

Skupna masa:: 33.000 kg

Podrobnosti ponudbe

ID oglasa:: A21682328

Referenčna številka:: HSM_VK8818_R-FU

Posodobitev:: nazadnje dne 09.04.2026

Opis

Good day,

We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations.

The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information.

Technical Data Baler:
Manufacturer: HSM GmbH + Co. KG, Germany
Type: VK 8818 R-FU
Year of manufacture: 2015
Operating hours: 20,331 hours, as of September 2025
Number of bales pressed: 29,020 bales, as of September 2025
Main press force: 1,000 kN
Nwedpfx Ajyz Af Eeh Uog
Specific press force: 120 N/cm²
Shear-edge ejector press force: 121 kN
Feed opening dimensions: 970 x 1,800 mm
Theoretical cycle time in idle operation: 8.3 seconds
Theoretical throughput: 643 m³/hour
Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm
Drive capacity: 2 x 45 kW, frequency-controlled
Total connected load: 110 kW
Total current consumption: 213 A
Fuse protection: 250 A slow-blow
Tying: 5-fold horizontal, fully automatic
Throughput rates at
bulk density of 20 kg/m³: 12.86 t/hour
bulk density of 50 kg/m³: 32.15 t/hour
Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material
Hydraulic oil tank volume: 2,000 L HVI 46
PLC: Siemens S7-300
Operator panel: Siemens TP 700
Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H)
Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H)
Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t)

Additional special equipment ordered:
Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output
Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials
Shear-edge ejector with 121 kN press force
Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end
Bale slide
Optical warning signal mounted on the control cabinet

Condition of the baler:
The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications.

Technical Data Chain Belt Conveyor:
Manufacturer: Stadler Anlagenbau GmbH
Type: Chain belt conveyor KF 1800
Year of manufacture: 2015
Belt speed: 0.36 m/second
Length of feed belt: 7,000 mm
Length of ascending belt: 14,500 mm
Length of goose neck: 1,550 mm
Inclination: 30°
Nominal width: 1,800 mm
Usable width: 1,638 mm
Overall conveyor height: 7,745 mm
Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H)

Scope of delivery:
- HSM VK 8818 R-FU baler
- Service platform
- Bale slide
- Wire deflection stations
- Wire spool trolleys (without wire spools)
- Stadler KF 1800 chain belt conveyor
- Crosswise sliding belt conveyor
- Pit cover from the feed conveyor to the pit
- Second control cabinet for baler operation at the conveyor
- Machine documentation in English

Delivery time:
The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received.

We would be pleased if this or one of our other balers is of interest to you.

Your service team,
Mertens & Frowein GmbH

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Nazadnje na spletu: Včeraj

Registriran od: 2024

21 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 2053 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

CNC stružno-rezkalni center Mazak Integrex 300 3 ST

Haifa

2.260 km

CNC stružno-rezkalni center
MazakIntegrex 300 3 ST

25.000 €

~~35.000 €~~

EXW Fiksna cena DDV ni mogoče izkazati

Pokliči

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.500 mm, največja hitrost vretena: 4.000 obr/min, največja hitrost vrtenja: 4.000 obr/min, skupna masa: 14.400 kg, Mazak Integrex 300 3 ST Krmiljenje - Mazatrol 640 mt pro 2 vretena 1500 mm Brez CE 2005/05 v zelo dobrem stanju Revolverski stružnica.....10 orodij ATC.....40 orodij Največji premer struženja 33,5″ 850,9 mm Največji premer struženja (uporaba osi Y) 26″ – 33,5″ 660,4 mm – 850,9 mm Nwedpfjx Rkvqsx Ah Usg Največji premer nad prečno drsno mizo 33,5″ 850,9 mm Največji premer nad spodnjo revolversko glavo 16,5″ 419,1 mm Nahaja se v Izraelu priključena na elektriko, pripravljena za ogled. Ta CNC stroj, izdelan na Japonskem, zagotovo potrebuje dovoljenje MATI.

Poglej podrobnosti

Mali oglas

WEIMA WLK15 90KW rotor 1500mm WEIMA WEIMA WLK15 90KW

Częstochowa

599 km

WEIMA WLK15 90KW rotor 1500mm
WEIMAWEIMA WLK15 90KW

Pokliči

Mali oglas

Stroj za pihanje SIG Corpoplast Blomax 12

Nemčija

650 km

Stroj za pihanje
SIG CorpoplastBlomax 12

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, A SIG Corpoplast blow molding machine is available. Output: 21,600 bottles/hour; bottle formats: 500ml/750ml/1000ml/1500ml; max. blow air pressure: 40 bar; dimensions (L/W/H): approx. 7000mm/4300mm/3100mm; weight: approx. 20,000kg. Includes Transver AG preform feeder, year of manufacture: 2008, silo, elevator, sorting unit, and chute. Documentation available. An on-site inspection is possible. Nodpfx Ast Eu Azjh Uowg

Poglej podrobnosti

Mali oglas

Oprema za odstranjevanje kovine ALREC-TEC GmbH METALL-KICKER 400

Mömbris

616 km

Oprema za odstranjevanje kovine
ALREC-TEC GmbHMETALL-KICKER 400

Pokliči

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25-029, skupna širina: 800 mm, skupna dolžina: 4.700 mm, skupna višina: 1.900 mm, vrsta vhodnega toka: trifazni, poraba energije: 2 kWh, Very good metal separator / metal detector for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after an eddy current separator (non-ferrous separator) or as a stand-alone machine. Separates all metals from a grain size of approx. 1 mm. Suitable for applications with metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is ready for immediate operation and can be inspected and tested. Camera option available on request! If the machine is too small, we also manufacture larger models. This is our demonstration machine. The maximum throughput depends on the material and application. Nwedpfx Aeqabm Esh Uog Price negotiable!

Poglej podrobnosti

Mali oglas

Paralelna stružnica 1300 x 7000 mm Morando SR 26

Concordia Sagittaria

174 km

Paralelna stružnica 1300 x 7000 mm
MorandoSR 26

Pokliči

Stanje: generalkompletno obnovljen (rabljeno), Conventional parallel lathe MORANDO Mod. SR26 1300 x 7000 mm Machine fully reconditioned and CE certified. New Turcite, new electrical/hydraulic systems. Ground ways. Complies with safety regulations, equipped with guards. Heavy-duty series with a single cast iron bed. Guideways as good as new. Four-jaw chuck diameter: 1700 mm. Includes No. 02 steadies (steady rests). Nwedpswbfw Djfx Ah Uog Permitted workpiece weight between centers without steadies: 25,000 – 30,000 kg. Permitted workpiece weight between centers with steadies and tailstock: 38,000 kg. Center height: 1300 mm. Swing over bed: 2615 mm. Swing over carriage: 2240 mm. Bed width: 1500 mm. Distance between centers: 7000 mm. Chuck diameter: 1700 mm. Spindle motor: 50 – 80 HP. Speed ranges: No. 24. Spindle speed range: 1 – 200 rpm. Dimensions: Length: 11,800 mm Height: 3,000 mm Approximate weight: 35,000 kg Machine can be seen under power.

Poglej podrobnosti

Mali oglas

Mehanska stiskalnica Mossini 400 ton -98 Mossini PDM/2BX 400

Olofström

1.127 km

Mehanska stiskalnica Mossini 400 ton -98
MossiniPDM/2BX 400

62.000 €

EXW VB plus DDV

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 1995, številka stroja/vozila: 0540/98, Funkcionalnost: popolnoma funkcionalen, Proizvodna številka: 0540/98. Nodpfx Aeicbbzoh Uewg Leto izdelave: 1998. Kapaciteta: 400 ton. Dolžina hoda: 300 mm. Število hodov: 10–40 / min. Nastavitev drsnika: 300 mm. Vgradna višina: 700 mm. Dimenzije mize: 1600 x 1300 mm. Neto teža: 45 ton. Odprtina portala: 1600 mm. Zunanje dimenzije: 2 x 3 x 6 metrov. Krmilni sistem: MEAB. Podajalnik / ravnalnik traku: iRON RNE 50B / 11. Odvijalec: iRON SA6000, maks. 700 mm.

Poglej podrobnosti

Mali oglas

Hidravlična stiskalnica z dvema stolpcema EMANUEL DEA 400/2000

Ciriè

583 km

Hidravlična stiskalnica z dvema stolpcema
EMANUELDEA 400/2000

Pokliči

Leto izdelave: 1993, stanje: rabljeno, TYPE: DEA 400/2000 Year: n.d. Ram Capacity: 400 tons Slide Stroke: 1,100 mm Max Shut Height: 1,600 mm Table Size: 2,000 x 1,600 mm Fast Stroke Speed: 650 mm/sec Cushion Capacity: 160 tons Cushion Stroke: 400 mm Height Above Floor: 5,800 mm Njdpfxsihf R Uo Ah Ujwg Distance Between Uprights: 3,400 mm Lateral Window: 1,600 mm

Poglej podrobnosti

Mali oglas

Doxato/Drama

934 km

DOLGOČASNO
STANKOIMPORTSTANKO 90

Pokliči

Mali oglas

Briketirni stiskalnik z vključenim drobilcem za oblance Styrotec MSP 120 ZK

Baienfurt

446 km

Briketirni stiskalnik z vključenim drobilcem za oblance
StyrotecMSP 120 ZK

Pokliči

Stanje: skoraj kot novo (rabljeno), The MSP 120 ZK is optimally suited for the crushing and subsequent briquetting of various types of metal chips. Nwedpfew R Ranex Ah Usg The MSP 120 ZK briquetting press with integrated shredder consists of a hydraulic chip briquetting press and a pre-installed crusher, precisely matched to each other. This system enables the size reduction and compaction of chips generated by turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolants (coolant emulsion, oil) absorbed during previous machining processes. The system consists of a feed hopper into which the material to be processed is loaded, and an integrated shredder that reduces the chip length. A conveyor system continuously and gradually feeds the shredded chips into the hopper of the chip press via a conveyor belt. There, two augers transport the material into the compaction chamber. The system features a monitored liquid collecting tank and a pump. The cooling fluids can be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for monitoring the fill level in the hopper. Optionally, a tipping device can be added for manual loading if required. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette Ø: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400 V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Cutter shaft: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Knives replaceable: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen size: 20 mm Hopper diameter: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power supply: 380 V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured lacquer RAL 7035 light grey

Poglej podrobnosti

Mali oglas

HBC 110 K / 75 kW Bollegraaf Recycling Solutions B.V. HBC 100 K

Nizozemska

974 km

HBC 110 K / 75 kW
Bollegraaf Recycling Solutions B.V.HBC 100 K

60.000 €

~~79.500 €~~

EXW Fiksna cena DDV ni mogoče izkazati

Pokliči

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, leto zadnje generalne obnove: 2025, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Nedpfx Ahjvf E Avs Uswg Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Poglej podrobnosti

Oglašujte tukaj