CNC stružno-rezkalni center

Mazak Integrex 300 3 ST

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Proizvajalec: MAZAK Tip: INTEGREX 300-3ST Leto izdelave: 2004 Kwedjyh I Rvjpfx Aaceu Krmiljenje: Mazatrol 640 CNC Teža stroja cca.: 14.200 kg Vpenjanje orodja: Capto C6 X-hod: 530 mm Y-hod: 200 mm Z-hod: 1.065 mm Obratovalno območje: 4.000 min⁻¹ Obdelovalni premer: 300 mm Obdelovalna dolžina: 1.000 mm Prostorske potrebe cca.: 6.500 × 3.000 × 3.200 mm Orodni revolver – mesta: 80

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. A 35-bar high-pressure coolant system with filtration and an additional tank is included. Please refer to the attached brochure for further details or contact us directly. Equipment: - LPS for left spindle Kodpfx Asxmhdnsacewu - Reduction tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor - Coolant supply through right-hand spindle - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information available on request.

Stanje: dober (rabljeno), Leto izdelave: 2009, Ref. No.: 10556 Manufacturer: DMG MORI Model: DMC 60 FD Year of manufacture: 2009 Control type: CNC Control system: Siemens 840DSL-721 Location: Halberstadt Kwodpsxc Tt Tjfx Aacou Country of origin: Germany X travel: 630 mm Y travel: 800 mm Z travel: 850 mm Max. workpiece diameter: 600 mm Max. workpiece weight: 400 kg Spindle speed: 12,000 rpm Tool changer: 60 positions Max. workpiece height: 500 mm Machine weight approx.: 10 t Number of pallets: 2 Motor spindle: 24,000 rpm Additional information: - Internal cooling - B-axis swivel range -5/ +110° - Cooled table console, table bearings, and motors - Cooled bearing blocks and spindle nuts on the ball screws - Cooled guides in the linear axes X/Y/Z - Drive power: 100%ED/40%ED 24 kW/35 kW - Chip conveyor - Internal coolant supply - Electronic handwheel - Rotary table with turning function - Operating mode 4 - 2 pallets, ø 630 mm - Pallet rotary changer - ICS 40 bar, 980 liters, paper band filter - Dsc Htetzywvjlwwxokp - Heidenhain probe - 3D Quickset The machine can be inspected under power by arrangement.

Stanje: rabljeno, Leto izdelave: 2019, Turning diameter: 400 mm Turning length: 584 mm Swing diameter over bed: 750 mm Control: Siemens 828 D Shop Turn Spindle bore: 81 mm Spindle speed: 3,500 rpm Spindle drive: 18.5/22 kW Spindle torque: 410 Nm Number of tools in turret 1: 12 BMT 65 Driven tools: 12 BMT 65 Speed of driven tools: 5,000 rpm Milling spindle drive: MK 5 kW y-axis: +/- 60 mm Rapid traverse: 30/30/10 m/min Tailstock: MK 5 Kjdpfx Aasww Nazjcowu Dimensions (L x W x H): 4.6 x 1.9 x 2.1 m Machine weight: approx. 6.65 t Flat-bed CNC lathe with driven tools and y-axis - 3-jaw chuck Kitagawa Ø 250 mm - Chip conveyor - Parts catcher with box integrated in the door - Signal lamp - 2 + 2 driven tool holders - Various static tool holders - Flat guides - Tool measurement arm - Programmable tailstock - 23 bar coolant supply - Enlarged coolant tank 225 l - Double cartridge filter - Coolant spray gun - Dual pressure clamping

Leto izdelave: 1990, Stanje: dober (rabljeno), CNC 4th Axis Kwjdpogabu Ujfx Aacju Make: NIKKEN Type: CNC-200 Year: 1990 with tailstock and base plate.

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 671 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 550 mm, pomik po osi Z: 450 mm, hitro pomikanje X-os: 35 m/min, hitri pomik os Y: 35 m/min, hitri pomik na osi Z: 35 m/min, proizvajalec krmilnikov: Heidenhain, model krmilnika: Heidenhain TNC7, teža obdelovanca (maks.): 1.100 kg, širina mize: 800 mm, dolžina mize: 616 mm, vrtljajska hitrost (min.): 20 obr/min, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Heidenhain TNC7 Vreteno HSK-A63 16000 min-1 30 mest za orodja Toga vpenjalna miza 800x616 Notranji dovod hladilne tekočine 40 bar s papirnim tračnim filtrom Strgalačni transporter Ročni kolešček BLUM LC53-Digilog - prelom/merjenje orodja Merilna tipalka BLUM TC Stroj VKLOP: 671 h, vreteno VKLOP: 61 h Stroj je star približno 6 mesecev. Prodaja po naročilu stranke. Ogled možen po predhodnem dogovoru. Ksdpfoyf E Atjx Aacowu

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 39.256 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 780 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, skupna višina: 2.800 mm, skupna dolžina: 7.000 mm, skupna širina: 7.000 mm, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 12.000 kg, For sale: Deckel Maho DMC 60 T machining centre The machine is in good condition and ready for immediate use. Technical specifications: Kwjdpfx Aajwtft Nsceu Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis swivel range: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table rotation speed: max. 30 rpm Number of tool pockets: 120 positions Max. tool diameter: 80 mm Max. tool diameter with an empty adjacent pocket: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse (X / Y / Z): 50 m/min Feed speed: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Space requirements: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, cooling system, high-pressure coolant 40 bar IKZ, paper band filter, 2-position pallet changer, tool breakage control Accessories such as clamping devices or tool holders are not included in the offer. On request, transport and loading can be organised throughout Europe at an additional charge. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery trading (purchase/sale) BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machinable length: 200 [mm] - Spindle speed: 10,000 [rpm] Kedpfx Aaeuhazgscewu - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 10 - Number of driven positions: 5 - Driven tool speed: 5,000 [rpm] FRONT TOOL POST - Number of positions: 4 SUB OPERATIONS - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 32,264 [h] ACCESSORIES - Controller: Meldas - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB MINIMAG 20

Stanje: dober (rabljeno), Leto izdelave: 2004, obratovalne ure: 77.711 h, potovalna razdalja osi X: 650 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, model krmilnika: Heidenhain iTNC530, hitri pomik na osi Z: 45.000 m/min, hitro pomikanje X-os: 45.000 m/min, hitri pomik os Y: 45.000 m/min, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Hermle C30 U Siemens 840D Stroj VKLOPLJEN: 77.711 h, vreteno VKLOPLJENO: 16.294 h - Vreteno HSK-A63 10.000 min-1 - 32 mest za orodja - Okrogla miza SRT 280 mm z integriranim sistemom vpenjanja SK50 (če ni potreben, se lahko zapre ali pa se predela v sistem vpenjanja z ničelno točko) - Zunanji dovod hladilne tekočine - Notranji dovod hladilne tekočine s papirnatim tračnim filtrom 80 bar - Pištola za čiščenje ostružkov - Transporter ostružkov - Ročni upravljalni modul Kedpexcp R Ijfx Aacewu - Avtomatska vrata kabine - 32 mest za orodja plus 87 dodatnih mest ZM87 - Toplotna kompenzacija - BLUM merjenje orodij Wange - Merilna tipala Renishaw - Posoda za ostružke - Signalna luč Stroj je bil popolnoma preverjen in obstaja geometrijski protokol ter krožni test meritve. Stroj si je možno kadarkoli ogledati in preizkusiti pod napetostjo. Zelo dobro ohranjen stroj.

Stanje: rabljeno, Leto izdelave: 1965, Honing diameter: 80 mm Stroke: 280 mm Throat depth: 300 mm Total power requirement: 6 kW Machine weight: approx. 2.6 t Max. honing diameter: 10–100 mm Max. honing depth: approx. 250 mm Max. spindle stroke: 260 mm Throat depth: 300 mm Installation height: 1,000 mm Kwodpfst Hwupex Aaceu Table size: 350 x 500 mm Table height above floor: 500 mm Spindle speeds, steplessly adjustable: approx. 85–300 rpm, 170–600 rpm Stroke speed, steplessly hydraulically adjustable: 0–23 m/min Spindle drive: 2 kW Total drive: approx. 6 kW – 380 V – 50 Hz Weight: approx. 2,600 kg Accessories / Special Equipment: - Mounted 2-station swivelling table for accepting 2 workpieces, with mechanical workpiece clamping via hand lever - Hydraulic feed of the tool - Shut-off via timer control, presumably with air measuring device - Honing oil system, various splash guards, etc. Condition: good – ready for demonstration Delivery: ex stock, as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further honing machines constantly in stock – please contact us for more information.