Balairka

Presto GmbH & Co. KG HPK 50 B

Stanje: novo, Leto izdelave: 2023, številka stroja/vozila: 7YXXX, VIS G je idealna i najučinkovitija rešitev za obdelavo odpada, kot so izseki, obrezki in žice. Priporočena je predvsem za avtomobilsko industrijo, podjetja za reciklažo kovin ter industrijo predelave in ponovno taljenje neželeznih kovin. Iaodjmqi Akjpfx Aa Ujr

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 27.000 h, Funkcionalnost: popolnoma funkcionalen, Prodaja se mobilne škarje za staro železo v rabljenem stanju. Stroj si lahko ogledate kadarkoli. Iodeykzv Hjpfx Aa Usar

Stanje: pripravljen za uporabo (rabljen), Tehnični podatki za stiskalnico Dixi 60 AUTOMAT Nakladalna odprtina (š x v): 1550 x 1000 mm Pogonska moč: 31,5 kW Tlačna sila: 60 t Ijdev Amw Nopfx Aa Uear Teža bale (odvisno od materiala): 350–600 kg Dimenzije bale (š x v x g, nastavljivo): 1100 x 800 x 300–1600 mm Čas stiskanja/cikel: 13/24 s Teža stroja: 7000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 37.656 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 85 t, širina odprtine za polnjenje: 1.500 mm, dolžina polnilne odprtine: 1.100 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 650 kg, skupna masa: 25.000 kg, kapaciteta rezervoarja za olje: 1.000 l, leto zadnje generalne obnove: 2024, volumenski pretok: 410 m³/h, transportna širina: 2.400 mm, transportna dolžina: 9.300 mm, Good day, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we cannot assume any liability for the accuracy and completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press door force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Isdpfov T I Evsx Aa Uear Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight press: approx. 25 t Note: This machine was used in a recycling facility for compacting paper, cardboard, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have already been replaced in the last 3 years. The machine has been serviced regularly. We would be pleased if this press is of interest to you. Your Service Team, Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 8.900 h, številka stroja/vozila: LP50VH2, Used Presona LP50 VH2 baler in good operating condition with conveyor belt Technical Data: LP 50VH2 - Theoretical volume capacity: 730 m³/h - Maximum throughput under load: 340 m³/h - Throughput based on material bulk density: * 30 kg/m³ = 7-9 t/h * 50 kg/m³ = 8-9 t/h * 100 kg/m³ = 11-14 t/h - Hopper length: 1500 mm - Hopper width: 1100 mm - Feed chamber volume: 2.7 m³ - Bale width: 1100 mm - Bale height: 720 mm - Bale length: adjustable - Bale weight: 400-550 kg - Number of vertical tying wires: 5 pcs. - Press force: 50 t - Specific pressure: 63 N/cm² - Max. hydraulic pressure: 250 N/cm² - Hydraulic tank capacity: 600 l - Motor power 400 V, 50 Hz: 1 x 45 kW - Oil cooler: 1 x 1.5 kW - Net weight approx.: 16 t - Year of manufacture: 2014 2) Feed Conveyor - Conveyor type: Chain conveyor - Year of manufacture: 2014 - Specifications: * Conveyor width: approx. 1300 mm * Length of horizontal section: 5,500 mm * Length of inclined section: approx. 10,800 mm * Conveyor weight: approx. 6 t Scope of delivery: - Baler, control cabinet, operator panel, conveyor belt for sale. Iodpfx Aaeyrhi Nj Ujar The documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete. Viewing available by appointment. We assume no liability for technical information or possible errors. Video material can be provided upon request.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, obratovalne ure: 44.590 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 2.000 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, kapaciteta rezervoarja za olje: 3.100 l, moč: 150 kW (203,94 KM), leto zadnje generalne obnove: 2025, Technical Data of the Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 112 Year of manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours (as of December 2025) Main press force: 200 t Specific press force: 16.5 kg/cm² Feed hopper dimensions: 2,000 x 1,020 mm Filling volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 75 kW Tying: 5-fold horizontal, fully automatic Throughput (MSW): approx. 48 to 54 t/hour, depending on material Hydraulic oil tank volume: 3,100 L Machine weight (press): approx. 50.8 t Scope of delivery: Iajdpfxex Dnb Uo Aa Usr • 1 MACPRESSE baler, model 111A • 1 operating manual with CE declaration, electrical and hydraulic schematic diagrams Notes: The machine has been serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank fully drained and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Dismantling of the press ram, disassembly into individual parts, overhauling the mechanism • Replacement of the front two main running rollers • Replacement of the knives on the press ram • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal kit replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame (left and right) replaced • Removal of worn press floor, replacement with wear-resistant HARDOX steel floor plate • Dismantling of the binding and twisting unit, disassembly into individual parts, overhauling the mechanism, replacement of all twisting shafts and ball bearings • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains lubricated and tensioned • All wire deflection rollers overhauled • All door contact switches replaced • Wirbulator dismantled, disassembled, and overhauled • General maintenance work performed Finally, the baler was subjected to a machine test in manual and automatic mode; see our video for the function test of the machine. Complete documentation (operating manual, CE declaration, electrical/hydraulic schematic diagrams) is available. An inspection is possible by appointment. No liability is assumed for technical specifications or possible errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, obratovalne ure: 34.480 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 750 kg, skupna masa: 19.000 kg, transportna višina: 3.300 mm, kapaciteta rezervoarja za olje: 750 l, moč: 45 kW (61,18 KM), Technical Data – Baler: Manufacturer: Bollegraaf Model: HBK 100 Year of manufacture: 2004 Isdpfxjxbgnhs Aa Uear Operating hours: 34,480 hours Main ram pressing force: 100 t Pre-pressing force max.: 42 t Feed hopper dimensions: 1,600 x 1,100 mm Filling volume: 3.15 m³ Theoretical cycle time: 22 seconds Theoretical throughput: up to 450 m³/hour Bale dimensions: 1,100 x 720 mm; length variable Drive power: 45 kW Total connected load: 60 kW Tying system: 5-fold vertical Throughput rates at bulk density: - 30 kg/m³: approx. 13 t/hour - 50 kg/m³: approx. 20 t/hour - 100 kg/m³: approx. 30 t/hour Throughput with air separator operation: approx. 20 t/hour Bale weight: 550 to 750 kg, depending on material Hydraulic oil tank volume: 750 L PLC control: Telemecanique TSX Micro Transport dimensions (excluding press): 10,900 x 2,320 x 3,300 mm (L x W x H) Machine weight (press): approx. 19 t Remarks: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but instead cuts the material between knives mounted on the pressing ram and a counter-knife in the frame. It is, therefore, a cutting-edge baler, comparable to models from Paal, unoTech, etc. The baler is in very good condition for its age, as it was used exclusively for baling paper from document destruction operations. The documentation (operating manual, CE certificate, electrical/hydraulic schematics) is complete. Inspection by appointment possible. We do not accept liability for the technical data provided or for possible errors.

Stanje: rabljeno, Tap for pipe threads Iodpfx Aaodk Rdve Uear Roughing and finishing cutter R 2 3/4 inch

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, 3-axis machining center, CNC FANUC 18MC Equipped with: - High-pressure coolant through spindle - Belt-type chip conveyor - Spindle chiller - Manuals - CE certificate TRAVELS X-axis (table longitudinal travel): 1020 mm Y-axis (table cross travel): 600 mm Z-axis (head vertical travel): 560 mm TABLE Distance table – spindle: 150–710 mm Dimensions: 635 × 1200 mm Maximum load capacity: 1,000 kg SPINDLE Table with T-slots: 6 × 18 h8 T (mm) Maximum speed: 10,000 rpm Speed range: 1 Maximum torque: 192 N/m Taper: No. 40 Spindle bearing inner diameter: 70 mm FEED Rapid traverse: 32,000 mm/min Cutting feed: 1–20,000 mm/min Jog feed: 4,000 mm/min Thrust (x&y/z): 7,400/13,500 N ATC Iedpfx Aaoxfguvo Usar Tool taper type: ISO 40 [BT-40] Number of tools: 24 [32] Maximum tool diameter: 88/125 mm Maximum tool length: 300 mm Maximum tool weight: 7 kg Tool selection method: random Tool change time: 2.5 sec Chip-to-chip time: 6 sec MOTORS Spindle drive: 15/11 kW Servo motors (x&y/z): 2.1/3.8 kW Coolant pump: 0.5 kW (nozzles) + 1.4 kW (washing) POWER SUPPLY Capacity: 30 kVA TANKS Lubricant: 4 l Coolant: 400 l DIMENSIONS Height: 2,825 mm Floor space: 2,650 × 2,200 mm Weight: 7,500 kg NOTE: Machine only, vices and tooling not included in the sale.

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Infeed Baling Press Presto HPK 50 HS, year of manufacture 2012, equipped with a perforator and ascending conveyor (slider belt conveyor) Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2012 Drive: 30 kW Pressing force: 50 t Feed opening: 1600 x 650 mm (L x W) Channel cross-section: 700 x 950 mm Maximum fill volume: 1.06 m³ Cycle time: 19 s Tying: 4-fold Throughput at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (L x W x H) Machine weight: approx. 10,500 kg Hydraulically movable perforator Drive power: 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear feed opening: 1380 x 1200 mm Materials: Paper, cardboard, film, PET bottles Iasdpfx Aaoyma Rze Uer Please note: All technical data is based on information provided by the manufacturer. We do not accept liability for the accuracy of the information or for any possible errors. This offer is non-binding, subject to prior sale and can be revoked at any time. Inspections can be arranged by appointment. Sale is ex works, against prepayment, without warranty or guarantee.