Presto Gmbh & Co. Kg Hpk 50 B nakup rabljenega (118.491)

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 15.606 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.050 mm, dolžina polnilne odprtine: 1.250 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 700 mm, teža bale: 500 kg, moč: 30 kW (40,79 KM), volumenski pretok: 160 m³/h, Good day, We hereby offer you, without obligation, a used baling press from Presto GmbH & Co. KG, model HPK 50 B. The following technical data has been taken from the manufacturer's operating manual and brochures, for the accuracy and completeness of which we cannot assume any liability. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions with a bulk density of 60 kg/m³: approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been repaired in our workshop (main control valve on the hydraulic block renewed) and tested during operation in both manual and automatic modes. The machine documentation is available in German. Inspection of the press is possible in our workshop by appointment. Iedoyplwfepfx Aa Ujar We would be pleased if this machine is of interest to you. Your Service Team Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 9,7 kW (13,19 KM), Technical Data – Cardboard Shredder (2-Shaft Shredder): Manufacturer: Presto GmbH & Co. KG Iasdpfx Aasu Tha Ie Ujr Model: PZA Year of Manufacture: 2007 Throughput Volume: 130 m³/hour Speed: 37/9 rpm Motor Power: 7.5 / 2.2 kW Electrical Connection: 32 A Internal Shredder Dimensions: 1,490 x 1,320 x 530 mm (L x W x H) External Shredder Dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine Weight: 0.45 t System Application: The PZA-type cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cartons from the returns department, which were then pressed into bales. Cartons were manually placed onto the infeed conveyor and transported directly to the shredder by a sliding belt conveyor for shredding. The pre-shredded cartons were then conveyed over several hundred meters to the baling press for compaction. Scope of Delivery: 1 piece Presto Cardboard Shredder (2-Shaft Shredder), model PZA Notes: The cardboard shredder was an integral part of the disposal line and was well maintained to ensure high availability in the returns department. The machine is in good condition and immediately operational. Price is per unit ex works our warehouse in Siddeburen, Netherlands. Full documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available. Inspection is possible by appointment. We assume no liability for the accuracy of the technical data or for possible errors.

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 3.641 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 36 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.080 mm, širina bale: 1.100 mm, višina bale: 750 mm, moč: 15 kW (20,39 KM), volumenski pretok: 90 m³/h, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Operating Hours: 3,641 h Main Press Force: 36 t Specific Pressing Force: 467 N/cm² Feed Hopper Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Iedpfx Aou Thh Eja Uoar Filling Volume per Press Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput under Operating Conditions (at material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Binding: 4-fold vertical, semi-automatic, with polyester twine Throughput at Bulk Density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour - 100 kg/m³: 3.1 t/hour Transport Dimensions (Baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (Baler): approx. 4 t Remarks: The baler has been function-tested in our workshop, subsequently stored, and is thus available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Viewing by appointment is possible. We assume no liability for the technical specifications or possible errors.

Stanje: novo, Leto izdelave: 2025, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: Iaodpendn Agjfx Aa Uor • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with free-standing bending head can be easily converted for complex geometries to switch between right- and left-hand bending. The plug-in bending tools allow for quick changeover to other tube sizes. A fast hydraulic system reduces auxiliary processing times, which is a key factor in series production. The clamping pressure for the tube hold-down is adjustable for optimal results. The PLC control unit (freely expandable via USB stick) with data storage and the latest X2X interface can store almost unlimited numbers of programs for bending angles, lengths, and rotational angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. Iaodpfxjng Exao Aa Ujr The machine offers two operating modes: In “Simple Bending,” the lengths and rotations of the bends relative to each other are automatically displayed. In “Controlled Bending” mode, the data is pre-set, and a continuous target/actual value comparison is performed during bending. This design eliminates positioning errors within a tolerance window, significantly minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early on reaching the bending angle. The compact drive unit with detachable mandrel holder provides advantages for on-site installation as well as for special designs with very large tube feed, and is also available as a stationary version with a tool and mandrel bar organizer. The affordable alternative to a fully controlled CNC machine. POSSIBLE APPLICATION AREAS: • Hydraulic piping installation • Pipeline construction • Plant engineering, e.g. chemicals • Metal construction • Prototype manufacturing Technical Data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bend radii: 1.5 x Ø (standard 2 x Ø) • Multi-functional machine controller, bending angle setting (0.1°) • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions longer on request) • Maximum 180º bend result • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-based tool monitoring for monitoring clamping pressure • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Test production welcome at our in-house demo room • Consultation and information session on your premises • Leasing/financing support and processing through JUTEC • Trade-in of your existing machine • Service contracts, maintenance on site

Stanje: novo, Leto izdelave: 2025, Priprava abraziva 1x pometna jama 1x vedričasti transporter Iasdpfxew Ivvco Aa Uor 1x zračni separator 1x električno vibracijsko sito 1x bunker za abraziv 1x tlačna peskalna naprava 200 l 1x peskalna cev, peskalna šoba, varnostno stikalo, krmilni kabel 1x krmilna omarica Opcijska oprema: - Prečna polžna transportna naprava čez celotno širino peskalne hale (tudi kot dodatni zalogovnik za večurno peskanje) - Razširitev na 2 abraziva: feritno in mineralno - Bubenski magnetni separator - Končna stopnja demagnetizacije - Magnetni predal

Stanje: novo, Leto izdelave: 2025, Blast Container High Cube Basic with Sweep Floor Shovel Hopper for approx. 4 pressure vessel fillings + blast vessel filling for extended blasting operation without refilling. Type SC.20FHC.5800 Basic Standard equipment, ready for operation: (Fill blasting media and connect power and compressed air) - 1x Control cabinet with emergency stop, Siemens Logo - 1x Pressure blast vessel - 1x Pressure regulator and water separator - 1x Blast hose DN 25 with 8mm nozzle - 1x Remote control with dead man's switch - 1x Media loading box/bunker Iaodpfx Asw Ivk Tea Uor - 1x Blast media sieve + coarse particle collection bin - 1x Vertical separator with blast dust extraction (dust reduction during blasting) - 1x Filter unit with pre-chamber separator - 1x Extraction wall as louvre/baffle separator - 1x Rubber wall cladding, 4mm with fabric reinforcement - 1x Tread plate floor 3/5 - 1x LED lighting - 1x Emergency lighting, door end switch, emergency stop - 1x Breathing air filter - 1x Blasting helmet - 1x Blasting gloves - 1x Suit Options: - Side Door Open, container can be fully opened on the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - Crane rail 500 kg - C-profile rail for powder coating equipment - Blast trolley - Filter with Big Bag - HEPA after-filter for contaminated dusts, e.g., when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor - And much more on request!

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 15.000 mm, notranja višina: 5.000 mm, filtrirna površina: 352 m², volumenski pretok: 22 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Iaodpfju Hy Tpsx Aa Uer Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: novo, Leto izdelave: 2026, Peskalni voziček 10t za peskalno napravo s pnevmatskim pogonom. - Pnevmatski pogon za obremenitev 10 t - Obremenitev: 10 t Isdpeyyxfrefx Aa Uear - Dimenzije: D=2000mm Š=2000mm V=500mm - Za tirni sistem - S sprejemnimi površinami za vpenjanje obdelovancev - Rotacijska miza kot opcija

Leto izdelave: 2015, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, SURFACE GANTRIES AND AUTOMATED INSERTING UNIT FOR METAL SHEET INLAYS This system is part of a larger production line; please also refer to our other listings for more information. The offered system includes 3 provisioning stations for cover layers, an automated adhesive application machine for sandwich bonding, a lay-up conveyor for the manual assembly of the inlay/ribbing, surface gantries for the handling of cover layers, and an automated inserting unit for metal sheet inlays/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm Iedpfxsyt Nm Sj Aa Uoar MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING PORTAL FOR CONTOUR & SURFACE APPLICATION (of cover layers & inlays): Number of needle valves for surfaces: 104 Number of needle valves for contour: 1 Adhesive system: 1C-PUR Number of nozzles for water spray unit: 8 ANCILLARY UNITS: Climatic chamber (storage for 1C-PUR adhesive) Vacuum pump for surface gantries Punching unit

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 6034, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 450 mm, pomik po osi Z: 590 mm, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 25 m/min, hitri pomik na osi Z: 25 m/min, nazivna (navidezna) moč: 45 kVA, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: Bahnsteuerung iTNC 530, skupna višina: 2.900 mm, skupna dolžina: 12.500 mm, skupna širina: 4.810 mm, skupna masa: 14.000 kg, hitrost vretena (min.): 100 obr/min, največja hitrost vretena: 12.000 obr/min, obratovalni tlak: 7 letvica, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN contouring control iTNC 530 • 4 axes • Travel paths X / Y / Z axes: 7200 / 450 / 590 mm • Working area X / Y / Z axes: 7000 / 400 / 350 mm • Weight: 14 t Equipment - Robust base structure as a welded frame construction - Linear ball guideways on all axes - Milling spindle unit: 100 - 12,000 rpm, tool holder SK 40 Drives: - X-axis (50 m/min) by rack-and-pinion drive - Y/Z axes (25 m/min) by ball screw drive - B-axis 9,000°/min - Swiveling operator panel - Automatic central lubrication - Traveling tool changer for 12 tool holders SK 40 - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication Technical Data - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" Isdpfx Asyzxfnsa Ujar - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse: X-Y-Z 50 – 25 – 25 m/min - Infinitely variable feed: 0 – 5,000 mm/min - Tool change: disc changer with 12 tool stations SK 40 - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant system: emulsion, 300 liters - Spindle speed: 100 – 12,000 rpm - Speed correction: 80 – 120% - Drilling capacity in St 60 / Al: up to 28 mm Ø - Thread cutting capacity in St 60 / Al: up to M24 - Position measuring system: rotary encoder/length measuring system - Positioning accuracy: 0.025 mm - Repeatability: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel paths X / Y / Z axes: 7,200 / 450 / 590 mm - Working area X / Y / Z axes: 7,000 / 400 / 350 mm - Space requirement with safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 t - Sound emission: average sound pressure level 79 dB (A)

Stanje: novo, Leto izdelave: 2026, Tlačna peskalna kabina za notranje peskanje cevi z vrtljivo mizo in ročnim načinom peskanja - Filtrirna naprava - Vrtljiva miza s prizmo za vstavljanje kot podpora cevi - Pogonska notranja cevna šoba - Možnost shranjevanja programa: pot gibanja, hitrost podajanja, funkcija izpihovanja - Zunanja peskalna šoba z oscilacijo (opcija) Iedpfx Asyn Inwsa Uear

Stanje: novo, Leto izdelave: 2026, Pressure blasting cabinet, 4-axis controlled, for cleaning moulds, steel rings, die casting moulds, tyre moulds, press tools, etc. Iajdpfodrtanjx Aa Ujr The travel path of the blasting nozzles is freely programmable. Includes 2 automatic nozzles and 1 manual blasting nozzle for post-cleaning of parts. Fitted with a Hardox turntable and screw conveyor for durable operation of the blasting system. For any technical questions, please contact us in writing or by phone. The machines are manufactured at our Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with our long-standing, well-known representatives.

Stanje: novo, Leto izdelave: 2026, Cuvette de sablage sous pression 200 l, mobile, pour chantier ou usage stationnaire. Iodpsynr E Tsfx Aa Ujar Robinetterie montée en toute sécurité sous la poignée. Très bien adapté aux utilisations intensives sur chantier. Composition : - Réservoir sous pression 200 l - Tamis de préfiltration - Couvercle de protection contre les intempéries - Séparateur d'eau - Détendeur - Réglage de l'air de transport (débit d’air pour la cuve et le tuyau de sablage) - Tuyau de sablage Ø25 mm, 10 m - Buse de sablage Venturi Ø8 mm (consommation d'air à 6 bar env. 3,57 m³/min) - Vanne de mélange d'abrasif, pièce en Y caoutchoutée pour une moindre usure - Filtre à air respirable avec tuyau d'air 10 m - Casque de sablage Systèmes de sécurité : - Interrupteur homme mort avec câble de commande - Dégazage rapide commandé En option : - Poignée agrandie avec support pour tuyau - Tête de sablage humide - Chauffage pour air respirable - Châssis de transport avec seau Hobbock et couvercle pour plusieurs heures de sablage sans remplissage - etc. Fabriqué en Allemagne

Stanje: novo, Leto izdelave: 2026, Mobilní tlakový pískovací kotel 140 l pro použití na stavbě nebo pro stacionární použití. Armatury bezpečně umístěny pod držadlem. Velmi vhodné pro robustní stavební provoz. Skládá se z: - Tlaková nádoba 140 l - Předfiltr - Ochranný kryt proti povětrnostním vlivům - Odlučovač vody - Redukční ventil - Nastavení množství dopravovaného vzduchu (množství vzduchu v nádobě a pískovací hadici) Iodsynr E Hjpfx Aa Ujar - Pískovací hadice Ø25 mm, 10 m - Pískovací tryska Venturi Ø8 mm (spotřeba vzduchu při 6 bar cca 3,57 m³/min) - Ventil na směšování abraziva typu Y, pogumovaný pro snížené opotřebení - Filtr dýchacího vzduchu s hadicí 10 m - Pískovací helma Bezpečnostní vybavení: - Bezpečnostní tlačítko (dead man spínač) s ovládacím kabelem - Řízené rychlé odvětrání Volitelné příslušenství: - Větší držadlo s držákem hadice - Hlava pro mokré tryskání - Ohřívač dýchacího vzduchu - Transportní rám s nádobou Hobbock a víkem jako nadstavba pro vícedenní tryskání bez doplňování - atd. Vyrobeno v Německu

Stanje: novo, Leto izdelave: 2026, Prenosni tlačni peskalni kotel 100l za gradbišča ali stacionarno uporabo. Armature varno nameščene pod ročajem. Zelo primeren za robustno uporabo na gradbišču. Sestava vključuje: - Tlačni kotel 100l - Predsito - Pokrov za zaščito pred vremenskimi vplivi - Odvlaževalnik zraka - Regulator tlaka - Nastavitev dovodnega zraka (količina zraka za kotel in peskalno cev) - Peskalna cev Ø25 mm 10 m - Venturi peskalna šoba Ø8 mm (poraba zraka pri 6 bar cca: 3,57 m³/min) - Y-ventil za mešanje peskalnega materiala, gumiran za manjšo obrabo - Filter za dihalni zrak s cevjo 10 m - Zaščitna peskalna čelada Varnostne naprave: - Varnostno stikalo (mrtvi mož) s krmilnim kablom - Krmiljeno hitro odzračevanje Iodoynr Emopfx Aa Uoar Opcijsko: - Večji ročaj z nosilcem cevi - Glava za mokro peskanje - Grelna enota za dihalni zrak - Transportno ogrodje z vedrom (Hobbock) in pokrovom kot nadgradnjo za večurno peskanje brez ponovnega polnjenja - itd. Izdelano v Nemčiji

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 150.050 h, Funkcionalnost: popolnoma funkcionalen, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC530, premer vrtljive mize: 500 mm, skupna masa: 13.000 kg, največja hitrost vretena: 14.000 obr/min, delovne ure vretena: 6.950 h, dovod hladilne tekočine: 20 letvica, nos vretena: HSK 63, število mest v zalogovniku orodij: 60, Oprema: ločilnik oljne meglice, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, • Stanje: vrhunsko stanje • Delovne ure: 6.950 • KESSLER-rotacijska miza, Ø 500 mm • Zaloga orodij: 60 postaj, HSK-A63 • Notranje dovajanje hladilne tekočine: 20 barov, s tračnim filtrirnim sistemom • Hladilni sistem: samodejni nadzor nivoja hladilne tekočine • Zrak skozi vreteno Isdpox Hg Ibofx Aa Uoar • Merjenje orodij: BLUM laserski merilni sistem za orodja • Merjenje obdelovanca: infrardeče tipanje obdelovanca (3D tipalni sistem), vključno s pripravo za merjenje obdelovanca • Nadzor trkov: POS DCM modul • Dovod medijev: 3-kanalni dovod medijev v sredini mize • Opazovanje: rotacijsko opazovalno okno • Ročno kolo Prosimo, pošljite nam neposredno povpraševanje na naši spletni strani, če vas zanima stroj. Iz tehničnih razlogov je neposredno povpraševanje za ponudbo prek zunanje platforme težavno in možno le z zamudo.

Leto izdelave: 2021, stanje: novo, Aluminium flat belt conveyor without substructure Conveyor length: 4000 mm Drive roller: knurled Return roller: crown-faced, turned Our core competency lies in delivering exactly what the customer truly needs. We work in close cooperation with our customers to develop customized, application-specific solutions and supply corresponding systems manufactured in-house. Please feel free to contact us by phone to find the right solution for your application. PVC conveyor belt Conveyor belt type EM 15/2 0+17 PVC white, FDA compliant according to EU10/2011 Belt width: 500 mm (external) Wave edge welded on both sides, 40 mm high T-30 cleats – 400 mm pitch * Antistatic due to conductive threads in the running side fabric Iajdpfx Aaehfwcbo Uor Endless welded with stepped finger splice Food-grade certificate included V2A stainless steel support plate, full-surfaced Drive: Motor approx. 1.1 kW * Optionally controllable via frequency inverter Connection: 220/400 V

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: BN120XT-HA-X,

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 5.612 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 550 kg, skupna višina: 2.800 mm, skupna masa: 12.000 kg, transportna višina: 2.800 mm, kapaciteta rezervoarja za olje: 300 l, moč: 30 kW (40,79 KM), volumenski pretok: 332 m³/h, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG Model: VK 4812 Isdpfxjvtpq Ho Aa Uear Year of Manufacture: 2014 Operating Hours: 5,612 hours (as of August 2025) Pressing Force, Main Press: 48 t Specific Pressing Force: 58.2 N/cm² Feed Hopper Dimensions: 1,250 x 1,020 mm Theoretical Cycle Time: 11.2 seconds Theoretical Throughput: 332 m³/hour Bale Dimensions: 1,100 x 750 x 600 to 1,200 mm Drive Motor Power: 30 kW Total Connected Load: 32 kW Rated Current: 59 A Tying: 4-fold horizontal, fully automatic Throughput Rates: - Bulk density 20 kg/m³: up to 6 t/hour, depending on material - Bulk density 50 kg/m³: up to 13 t/hour, depending on material Bale Weight: up to 550 kg, depending on material PLC Control: Siemens SIMATIC S7-200 Control Panel: Siemens HMI Touch Panel Hydraulic Oil Tank Capacity: 300 L Oil Type: HVI 46 Machine Dimensions with Bale Chute: 10,046 x 4,387 x 2,705 mm (L x W x H) Transport Dimensions (Baler): 8,500 x 2,500 x 2,750 mm (L x W x H) Machine Weight (Baler): approx. 12 t Scope of Delivery: - HSM VK 4812 baler, without hydraulic oil, without conveyor technology - Two wire reel boxes for 8 pieces of 40 kg wire reels, without wire - Bale chute - Machine documentation in German Remarks: The baler is equipped with an oil cooler and volt-free contacts for external control. Operation at the control cabinet is on the left in the pressing direction; the needle unit is on the right side and can be folded down to the rear for transport. The baler has been partially overhauled and tested in our workshop—see photos and our function video. Documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available in German. Inspection by appointment possible. We assume no liability for technical specifications or potential errors.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 16.000 m³/h, moč: 15 kW (20,39 KM), Mobilna filtrirna enota 15 kW, odsesalna zmogljivost 16.000 m³/h za agresivne prahove s predkomornim izločevalnikom. Montaža v približno 10 minutah. Čiščenje filtrskih kartuš z impulzi stisnjenega zraka. 16 filtrovskih kartuš s površino 15,6 m², Bio razred M. Odvzem prahu z big bag vrečo. Filter je sestavljen iz dveh posameznih delov, ki ju sestavite z viličarjem. Povezava prek 6 hitrozapiralnih zaponk in 2 povezovalnih vtičev. Na zadnjo stran filtra se lahko priključi cev ali odsesovalna cev. Iaedpfx Aew Ivp Noa Ujr

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 16.000 m³/h, moč: 15 kW (20,39 KM), Mobilna filtrirna enota 15 kW, odsesalna zmogljivost 16.000 m³/h za agresivne prahove s predkomornim izločevalnikom. Montaža v približno 10 minutah. Čiščenje filtrskih kartuš z impulzi stisnjenega zraka. 16 filtrovskih kartuš s površino 15,6 m², Bio razred M. Odvzem prahu z big bag vrečo. Filter je sestavljen iz dveh posameznih delov, ki ju sestavite z viličarjem. Povezava prek 6 hitrozapiralnih zaponk in 2 povezovalnih vtičev. Na zadnjo stran filtra se lahko priključi cev ali odsesovalna cev. Iasdjw Ivpvopfx Aa Uer

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 4.000 mm, notranja dolžina: 6.000 mm, notranja višina: 3.000 mm, filtrirna površina: 99 m², volumenski pretok: 7 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast room for all types of abrasive media, constructed from steel with insulated panels, including filtration system, recirculating air system, abrasive media preparation, 200L automatic refill pressure blast pot, blast hose with deadman control, breathing air system, LED lighting, wall lining made of 70 Shore 4mm reinforced rubber sheet, sweep pit with bucket elevator. Abrasive media recovery via sweep pit with bucket elevator, upgradable to cross screw conveyor with dosing hood across the full width as a sweep pit or as a complete flat conveyor floor. Workpiece transport is retrofittable: blast trolley with rail bed, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradable with a suitable magnetic drawer or electrically driven magnetic drum separator. For blasting with two different types of abrasive media (ferritic and mineral), upgradable with magnetic drum separator, final demagnetization stage, and a second air classifier for separation and cleaning of the abrasive media. Safety equipment: Emergency lighting with battery backup, emergency stop switches inside the cabin and externally, viewing window into the blast chamber, gate/door limit switches, deadman control, pressure vessel quick venting. Warranty of up to 5 years on various components. 50 years of experience and more than 3,000 systems installed in blast plant construction. Iaodpfx Aaju A A Tks Usr

Stanje: novo, Leto izdelave: 2025, Blast room 12x5m with blasting trolley and flat conveyor floor. Flat conveyor floor, screw trench, bucket elevator, magnetic separator, reclamation unit, material bunker, abrasive replenishment system, free-jet pressure blast fan, filtration system with cleaning mechanism. Walls lined with 4mm fabric-reinforced rubber sheeting. Isdpfx Aaodhliks Uear For any technical inquiries or further information, please contact us in writing or by phone. The machines are manufactured at our Grossenlueder facility since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with their long-standing, well-known contact persons.

Stanje: novo, Leto izdelave: 2025, Tumble belt shot blasting machine with an 11 kW direct-drive impeller wheel featuring 8 throwing blades. Belt width: 1000 mm, diameter: 900 mm. Iasdpfx Aajhvikuj Usr