Stroji za vrečke iz cevi nakup rabljenega (199)

Stanje: novo, Leto izdelave: 2025, Horizontal packaging machine, MINI VERSION, for pre-made doypacks, block-bottom bags, or flat pouches. Modules for specific pouch requirements such as zip/press closure, twist closure (spout), and gusset formation can be integrated; optional: batch/date printer, gas flushing module. Pouch detectors check for correct placement and complete opening of the doypack pouch. Immediately after pouch detection, the product is dispensed via the filling spout into the pouch. The sealing area is kept clean throughout the process. A special gripping system securely holds the stand-up pouch in position during filling, before the doypack is closed and sealed. Equipped with MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC cylinders. – Specifications: Stainless steel housing (SS304); max. machine cycle rate (idle): 10 cycles/min; pouch width: 250–450mm; pouch length: 250–500mm; required compressed air: 6.5 bar, 0.2 m³/min; power supply: 220V, single phase; machine dimensions: L1150×W950×H1570mm. Tedpfev Nllrox Anpjd Please note that our new machine prices are frequently lower than the typical prices for used equipment. Please feel free to inquire and share your packaging requirements with us. – We generally have 30–50 different new machines available ex stock for immediate delivery. For custom-built machines, we offer very short lead times, starting at approximately 3 weeks. – All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Horizontal packaging machine, MINI VERSION, for pre-made doypacks, block bottom bags, or flat bags in duplex version with higher cycle speed. Modules for specific bag features such as zip/press closure, screw cap (spout), and gusset form can be integrated. Optional: batch/date printer, gas flushing module. Bag detectors check for correct placement and full opening of the doypack. Once the bag is detected, the product is dispensed into the bag via the filling spout. The sealing area is kept clean during this process. A special gripping system holds the stand-up pouch precisely in position during filling, before the doypack is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC cylinders. - Specifications: stainless steel housing (SS304); max. machine cycle speed in idle mode: 25 cycles/minute; bag width: 100-300 mm; bag length: 100-350 mm; required compressed air: 6.5 bar, 0.4 m³/min; power supply: 220V, single-phase, 2kW. Tsdpfov Nllxox Anped Please note that our new machine prices are often below the usual used equipment prices. Feel free to send us your inquiry and describe your packaging requirements. - We usually have 30–50 different new machines immediately available from stock. For custom-built machines, we also offer very short delivery times starting from approx. 3 weeks. - All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine including dosing unit(s) with 6 production lines for manufacturing "stick-packs" with a central back seal (alternatively: 3- or 4-side sealed - available at additional cost) for packing granulates (sugar, salt, etc.). PLC and color touchscreen by OMRON, self-diagnostic functionality. Pneumatic components by AIRTAC, temperature PID control by OMRON, electronic components by SCHNEIDER and OMRON. Film feeding, AB converter control, stainless steel version (SS304), oscillating cup filler for granulates. – Specifications: max. machine cycle rate (idle): 6x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP-/PE and laminated films; pouch sizes: L(50-350)xW(10-68)mm; power supply: 220V, 4.5kW; compressed air: 1.5m³/min, 6 bar; machine dimensions: L1600xW1400xH1900mm; weight: 550kg. The machine/system is also available in further versions for various packaging sizes and packaging speeds. Tjdpjv Nmdcefx Anpjd Please note that our new machine prices are often below standard used equipment prices. Feel free to contact us and let us know your packaging requirements. – Typically, we have 30-50 different new machines in stock and available for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine including dosing unit(s) with 8 production lines for manufacturing "stick-packs" with a standard fin seal (optionally: 3- or 4-side seal – at extra cost) for packaging standard liquids (water, vinegar, etc.). PLC and color touchscreen from OMRON, self-diagnostic function. Pneumatic components by AIRTAC, temperature PID by OMRON, electrical components by SCHNEIDER and OMRON. Film feed, AB inverter control, stainless steel construction (SS304), piston pump with 60-liter hopper. - Specifications: max. machine cycle rate (idle): 8x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; sachet sizes: L(50-350)xW(10-50)mm; power supply: 220V, 5.5kW; compressed air: 1.5m³/min, 6 bar; machine dimensions: L1700xW1400xH1900mm, weight: 650kg. The machine/system is also available in other variants for different packaging sizes and packaging speeds. Tjdpfx Anov Nmfajpjd Please note that our new prices are often lower than typical prices for used equipment. Feel free to contact us and let us know your packaging requirements. – We typically have 30-50 different new machines available from stock for immediate delivery. For machines built to customer specification, we offer very short lead times from approximately 3 weeks. – All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine including dosing unit(s) with 10 production lines for manufacturing stick packs with a center back seal (alternatively: 3- or 4-side seal available at extra cost) for packaging powders (such as pepper, milk powder, etc.). PLC and color touchscreen control by OMRON, with self-diagnostics. Pneumatic components by AIRTAC, temperature PID control by OMRON, electronic components by SCHNEIDER and OMRON. Film feed and AB converter control, stainless steel construction (SS304), auger dosing unit with servomotor, including hopper. - Specifications: Accuracy: +/- 0.3-1%; max. machine cycle rate (no load): 10x60 cycles/minute; accuracy +/-10%; suitable for all BOPP/PE and laminated films; pouch size: L(50-350)xW(10-38)mm; power: 220V, 6.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1800xW1500xH1900mm; weight: 750kg. The machine/system is also available in further configurations for different packaging sizes and speeds. Tedpfov Nmf Tex Anpsd Please note that our new prices are often lower than typical used prices. Feel free to contact us with your packaging requirements. Generally, 30-50 different new machines are available from stock for immediate delivery. For customer-specific machines, we offer very short delivery times starting from approximately 3 weeks. - All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Compact complete version of the vertical packaging system with auger dosing unit (1-300g) AND 4-head weighing system (2.4L/head), screw conveyor, single vessel conveyor, and discharge conveyor belt. This unique system is suitable for all types of granulates and powders. The packaging machine and discharge conveyor can be positioned under either the auger dosing unit or, within seconds, under the 4-head weighing system as needed. Outstanding flexibility and remarkable cost-efficiency. Vertical packaging machine: MITSUBISHI PLC, WEINVIEW touchscreen operation monitor, automatic program setup, registration mark sensor, quick-change forming set, welding unit with servo motor, film transport servo motor, capable of dual transport. - Specifications: Bag size: L(50-230)xW(60-190) (single transport); max. idle machine cycle: 100 cycles/minute; stainless steel; 220V/4.5kW; 6 bar, 0.2m³/min; machine dimensions: L4214xW2260xH3203mm (depending on final layout); weight: 1000/1200kg. Todev Nmgwepfx Anped Please note that our new prices are often below the typical used equipment prices. Feel free to contact us and let us know your packaging requirements. - We generally have 30-50 different new machines in stock for immediate delivery. For custom-built machines, we offer very short lead times from about 3 weeks. - All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Sample system for counting and packaging small metal items or hardware in flat bags with back seal. The weighing and counting system with vertical form-fill-seal machine is suitable for small metal products such as nails, screws, nuts, bolts, washers, etc. The iron and metal items are conveyed via a magnetic belt to the weighing and counting system and then packaged in flat bags. – Specifications of the weighing-counting-packaging system: max. machine cycle speed in idle mode: 8 cycles/minute; bag dimensions: max. L200xW300mm; power: approx. 2kW, 220V; compressed air requirement: 0.2m³/min, 6-8 bar. The system can be extended for counting and packaging a variety of products into one bag. The specifications provided refer to the sample packaging system. Final machine dimensions and total price depend, among other factors, on the required packaging speed, the products to be packaged, and the bag size. Tedpfx Asv Nmhzsnped Please note that our new prices are often lower than typical used machine prices. Feel free to contact us and let us know your packaging requirements. – We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from around 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Complete dosing and packaging system for liquids, including tank, pump, and discharge conveyor belt. Suitable for both viscous and non-viscous liquids such as creams, toothpaste, body lotion, shampoo, mayonnaise, ketchup, honey, jam, edible oil, vinegar, juice, milk, etc. The vertical form fill seal machine (VFFS) is equipped with the following components: PLC (touchscreen operating monitor, available in various languages, e.g. English, German, etc.), date printer, automatic program setup, registration sensor, quick-change forming set, pneumatic sealing unit, servomotor-driven film transport (double transport possible), air separation/removal device (removes air from the bag before sealing—does not generate a vacuum), holder for heavy finished bags, Euro slot punching unit, suitable for OPP and PE film (PE unit possibly at extra cost). — VFFS machine specifications: Filling volume: 150–1200ml; Max. film width: 420mm; Bag size min–max: L(60–300)xW(60–200)mm; Max. machine cycle rate (idle): 50 cycles/min; Stainless steel 304; 220V, 2.2kW; 6 bar, 0.3m³/min; Machine dimensions (LxWxH): approx. 1080x1300x1400mm; Weight: 500kg. — Tank and pump specifications: Tank capacity approx. 50L (customization available); Height: approx. 70mm; Pump available in various versions, e.g. 10–150ml, 150–500ml, 500ml–1L, 1L–2L, 2L–5L, etc. The pump system will be adapted to the customer’s product based on sample submission. Specifications and product feeding may vary accordingly (surcharges may apply). The discharge conveyor has a stainless steel frame. Todpfx Ansv Nmk Nopod — Conveyor specifications: Conveyor speed: 30m/min; 220V, 0.55kW; Dimensions (LxWxH): approx. 1850x550x1230mm; Weight: 80kg. — Complete system dimensions: approx. L1780xW1850xH1470mm, depending on final configuration. The system must generally be tailored to customer/product requirements, so specifications may vary between modules and machines. Key components: Siemens color touchscreen display, Siemens PLC controller, Siemens servomotor, Airtac cylinders, Airtac solenoid valve, Omron relays, Siemens servomotor for film transport. The machine/system is also available in alternative versions for various packaging sizes and packaging speeds. Please note that our new prices are often lower than typical used prices. Feel free to contact us and share your packaging requirements. — We typically have 30–50 different new machines immediately available from stock. For customized machines, we offer very short delivery times from approx. 3 weeks. — All machines are sold with a full warranty.

Stanje: novo, Leto izdelave: 2025, Complete dosing and packaging system for liquids, including tank, pump, and discharge conveyor. Suitable for viscous and non-viscous liquids such as creams, toothpaste, body lotion, shampoo, mayonnaise, ketchup, honey, jam, cooking oil, vinegar, juice, milk, etc. The vertical form-fill-seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen operator panel, available in various languages, e.g., English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming set, pneumatic sealing unit, servo motor for film transport, dual transport possible, air separation/extraction device (removes air from the pouch before sealing—does not create a vacuum), holder for heavy finished bags, Euro hole punching device, suitable for OPP and PE film (PE unit may incur extra charge). Specifications of the VFFS packaging machine: Filling range up to 5000ml; film width: max. 620mm; pouch size min-max: L(100-400)xW(180-300)mm; max. idle cycle rate: 45 cycles/minute; Stainless steel 304; 220V, 5kW; 6bar, 0.3m³/min; machine dimensions: LxWxH: approx. 1780x1850x1950mm; weight: 700kg. Tank and pump specifications: Tank capacity approx. 50L (customizable); height: approx. 70mm; the pump is available in various versions, e.g., 10~150ml, 150~500ml, 500ml~1L, 1L~2L, 2L~5L, etc. The pump system is tailored to customer products based on sample submission. Specifications and product feeding differ accordingly (surcharges may apply). The discharge conveyor has a stainless steel frame. Specifications: conveyor speed: 30m/min; 220V, 0.55kW; dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Dimensions of the complete system: approx. L1780xW3700xH2020mm, depending on final configuration. The system must be adapted to customer-/product-specific requirements. Therefore, module and machine specifications may vary. Main components: Color touchscreen display SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. The machine/system is also available in various versions for different pouch sizes and packaging speeds. Tjdpfx Anjv Nmlgspsd Please note that our new prices are often below typical used equipment prices. Feel free to inquire and let us know your packaging requirements. Normally, 30–50 different new machines are available immediately from stock. For custom-built machines, we offer very short delivery times from approx. 3 weeks. All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Extra-large version of the I-, Z-, or L-shaped link belt conveyor, which transports the product from the vibratory feeder to the weighing unit. Open design, hygienic, water-resistant plastic conveyor. - Specifications: 380V/1.1kW; dimensions and weight depend on the final system configuration. The machine/system is also available in further versions for various packaging sizes and packaging speeds. Please note that our new equipment prices are often lower than the usual used equipment prices. Feel free to inquire and let us know your packaging requirements. - We typically have 30-50 different new machines available for immediate delivery from stock. Additionally, for custom-made machines, we offer very short delivery times from approximately 3 weeks. - All machines are available with full warranty. Tsdpfx Anev Nmnbopod

Stanje: novo, Leto izdelave: 2025, Vertical filling machine for packaging low-viscosity products in flat pouches. Includes liquid dosing unit. Specifications: max. machine cycle rate (idle): 60 cycles/minute; suitable for volumes of 100-1000ml; infinitely adjustable pouch length; accuracy: depending on the product; max. film width: 50-200mm; pouch size: max. L50-250xW50-200mm; no compressed air required; 220V, 1.95kW; stainless steel version (housing: SS201, parts in contact with product: SS304); machine dimensions: L1120xW920xH2050mm; weight: 500kg; suitable for laminated composite films such as BOPP/PE films, etc. Please note that our new prices are often lower than the usual prices for used machines. Feel free to inquire and let us know your packaging requirements. - We typically have 30-50 different new machines available from stock for immediate delivery. For custom-made machines, we also offer very short lead times starting from around 3 weeks. - All machines are available with a full warranty. Tjdpjv Nmzhsfx Anpsd

Stanje: novo, Leto izdelave: 2025, Net bag packaging machine. Suitable for PE net bags in pillow or gusseted form for fresh vegetables and fruit, e.g.: potatoes, onions, apples, cabbage, peas, carrots, peaches, lemons, grapefruits, kiwis, etc. Full stainless steel version, PLC control with touchscreen. Print mark sensor. Suitable films: PE net, net-film composite, etc. Bag types: flat bags, stand-up pouches with or without carry handle. - Specifications: max. film width: 620mm; bag length: 100-380mm; bag width: 110-300mm; max. machine cycle rate (idling): 20 cycles/minute; compressed air: 0.36m³/6bar; power supply: 220V, 3kW. The machine/system is also available in other configurations for different packaging sizes and speeds. Tjdpjv Nm Alefx Anpjd Please note that our new prices are often below typical used equipment prices. Feel free to enquire and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For machines requiring customization, we offer very short lead times starting from about 3 weeks. - All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Net bag packaging machine. Suitable for PE net bags in pillow or gusseted form, for fresh vegetables and fruit such as potatoes, onions, apples, cabbage, peas, carrots, peaches, lemons, grapefruits, kiwis, etc. Fully stainless steel construction, PLC control with touchscreen. Print mark sensor. Suitable films: PE net, mesh/film composites, etc. Bag types: flat bags, stand-up pouches with/without carrying handle. – Specifications: max. film width: 1000mm; bag length: 100–600mm; bag width: 240–490mm; max. machine cycle speed (unloaded): 14 cycles/minute; compressed air: 0.60m³/6bar; power: 220V, 5kW. The machine/plant is also available in further versions for various packaging sizes and speeds. Please note that our new equipment prices are often below typical used equipment prices. Feel free to inquire and let us know your packaging requirements. – We usually have 30–50 different new machines available for immediate delivery from stock. For custom-built machines, we offer very short delivery times, starting from approx. 3 weeks. – All machines come with a full warranty. Tsdpfxov Nm Axe Anped

Stanje: novo, Leto izdelave: 2025, Complete large vertical filling system for pre-made bags. - Weight range: 2,000 - 50,000g; max. machine cycle rate (idle): 16 cycles/minute. The system includes product feed, automatic weighing unit, conveyor belt and either a sealing or stitching module. Suitable for granular products such as seeds, pet food, etc. The pre-made bags are manually placed into the pneumatic bag clamp holder. The product is dosed by weight and filled into the bag. The filled bag is then conveyed to the sealing or stitching unit. - Platform and infeed/outfeed dimensions can be customised: specifications depend on the final layout/design of the complete system. The machine/system is also available in further versions for different packaging sizes and speeds. Tjdpfsv Nm Dvex Anpsd Please note that our new machine prices are often below typical used equipment prices. Feel free to contact us and tell us about your packaging requirements. We usually have 30-50 different new machines in stock for immediate delivery. Additionally, for customised machinery, we offer very short lead times from approx. 3 weeks. - All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic vertical system: automatic weighing, automatic bag feeding, bag opening, filling, and discharge. Transfer to the automatic sewing machine, where the bag is stitched shut. Completely unmanned packaging process. Easy operation thanks to touchscreen, rapid format changes. - Specifications: Measuring range: 10–50kg; Packaging material: woven hard plastic bags; max. machine cycle rate (idle): 12 cycles/minute; compressed air: 6 bar, 0.6m³; machine weight: 1,600kg; power supply: 5kW, 380V. Please note that our new equipment pricing is often below the typical used equipment market prices. Feel free to contact us and let us know your packaging requirements. – 30–50 different new machines are usually available ex stock for immediate delivery. For custom-manufactured machines, we offer very short delivery times starting at approximately 3 weeks. – All machines come with a full warranty. Todpfx Aov Nm Easnpsd

Stanje: novo, Leto izdelave: 2025, Checkweigher for determining whether the product meets the target weight. 3 rejection stations, each with 2-way sorting. – Specifications: Belt width: 220 mm, weighing range: 5–1000 g; accuracy: +/- 0.3–3 g; max. machine cycle rate (idling): 80 cycles/minute; power supply: 220V, single-phase; machine dimensions (mm) approx.: L2459 x W684 x H780 (weighing conveyor). Tedpfx Aev Nm Rponpod Please note that our new prices are often below typical used equipment prices. Simply enquire and let us know your packaging requirements. – We typically have 30–50 different new machines available from stock at any given time. For custom-built machines, we offer very short delivery times starting from about 3 weeks. – All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine for the production of pillow bags with back seam and gusseted stand-up pouches (gusset tooling required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photo sensor (print mark detection) for seal/cut positioning; pneumatic sealing unit for end sealing; servomotor for film feed; thermal transfer printer for batch number, date, best before date. - VFFS machine specifications: max. machine cycle rate in idle: 70 cycles/min; bag size: L(40-200)xW(30-150)mm; suitable film width: 80-320mm; product-contact parts: AISI 304 (optionally AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 3.2kW; required compressed air: 0.7MPa; air consumption: 0.2-0.4m³/min; weight: 310kg. Please note that our new prices are often below typical used machine prices. Feel free to inquire and tell us about your packaging application. - We usually have 30-50 different new machines immediately available from stock. For customer-specific machines, we offer very short delivery times starting from approx. 3 weeks. - All machines are available with full warranty. Tsdpfx Anov Nnb Neped

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal (VFFS) packaging machine for the production of pillow bags with longitudinal rear seam, gusseted stand-up pouches (gusset tooling required) OR for pyramid-shaped bags (special sealing unit required). Equipped with: touchscreen; PLC; photoelectric sensor for registration mark detection (controls seal/cut position); pneumatic end-sealing unit; servo drive for film pulling; thermal transfer printer for batch number, date, and best-before date. - Specifications of the VFFS machine: max. idle cycle rate: 50 cycles/min; bag size: L(40–450) x W(105–350) mm (double film pull possible for longer bags); suitable film width: 230–720 mm; product-contact parts made of AISI 304 (optionally AISI 316 for an additional charge); power supply: 220V, 50/60 Hz; power consumption: 3.8 kW; required compressed air: 0.4–0.8 MPa; compressed air consumption: 0.8 m³/min; dimensions (LxWxH): 1996*1496*2138 mm; weight: 850 kg. Tjdpfjv Nnddox Anped Please note that our new machine prices are often below typical used machine prices. Feel free to inquire and inform us of your packaging application. – We always have 30–50 different new machines available ex-stock for immediate delivery. For machines manufactured to customer specifications, we offer very short delivery times starting from approx. 3 weeks. – All machines are delivered with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine for the production of pillow bags with back seam, gusseted stand-up pouches (gusseting tool required), OR for pyramid-shaped bags (special sealing unit required). Equipped with: touchscreen; PLC; photoelectric sensor (register mark detection) for seal/cut positioning; pneumatic end-sealing unit; servo motor for film feed; thermal transfer printer for batch numbers, date, best-before date. - VFFS machine specifications: max. machine cycle rate (no load): 40 cycles/minute; bag sizes: L(40-650)xW(140-450)mm (double film feed for longer bags possible); suitable film width: 220-920mm; product-contacting parts made of AISI 304 (optionally AISI 316 available at extra cost); power supply: 220V, 50/60Hz; power consumption: 4.5kW; required compressed air: 0.2-0.8MPa; compressed air consumption: 1.0m³/min; dimensions (LxWxH): 2470*1730*2065mm; weight: 1150kg. Tedpfsv Nnd Dox Anpod Please note that our new machine prices are often below the usual second-hand prices. Just inquire and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from about 3 weeks. - All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal (VFFS) machine for producing pillow bags with longitudinal seam and gusseted stand-up pouches (gusset tool required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photoelectric sensor (print mark detection) for sealing/cutting position; servo-driven sealing unit for end sealing; servo motor for film feed; thermal transfer printer for batch number, date, best before date. - Specifications VFFS machine: max. machine cycle rate (unloaded): 30 cycles/minute; bag size: L(60-600)xW(200-585)mm (double film draw-off L = 1100mm), gusseted stand-up pouch: L(60-600)xW(140-500)xD(100-250)mm (double film draw-off L = 1100mm); suitable film width: 420-1200mm; product-contacting parts made of: AISI 304 (optionally AISI 316 at extra charge); power supply: 220V, 50/60Hz; power consumption: 8.7kW; required compressed air: 0.7MPa; air consumption: 0.25-0.40m³/min; weight: 1060kg. Tsdpfxjv Nnfns Anpjd Please note that our new machine prices are frequently lower than typical used machine prices. Simply inquire and let us know your packaging requirements. - Generally, 30-50 different new machines are available immediately from stock. For custom-built machines, we offer very short lead times from approx. 3 weeks. - All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine, specifically designed for the production of stand-up pouches with a rectangular base and quad-seal (4-side seal). Equipped with: touchscreen; PLC; photoelectric sensor (print mark detection) for sealing/cutting position; pneumatic sealing unit for end sealing; servo motor for film draw-off; thermal transfer printer for batch number, date, and best-before date. - VFFS machine specifications: max. machine cycle speed idle: 45 cycles/minute; bag size: length (180-400mm), front width: (70-220)mm, side width: (45-120)mm, (double film draw-off for longer bags possible); suitable film width: 270-620mm; product-contact parts made of: AISI 304 (optionally AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 5.8kW; required compressed air: 0.4-0.8MPa; compressed air consumption: 0.3m³/min; dimensions (LxWxH): 2330*1520*2025mm; weight: 880kg. Please note that our new prices are frequently below typical used equipment prices. Feel free to inquire and tell us about your packaging requirements. – We generally have 30–50 different new machines immediately available from stock. For customer-specific machine builds, we offer very short lead times starting from approx. 3 weeks. – All machines are delivered with a full warranty. Tsdpfx Aov Nng Ejnpsd

Stanje: novo, Leto izdelave: 2025, The SHRINK tunnel can be combined with the AMTEC Shrink Wrapper SPEEDshrink 35XL. High-speed shrink performance with 0–20 m/min for polyolefin film (POF film). – Specifications: Max. packaging dimensions: W700 x H250 mm; tunnel size: L1500 x W800 x H300 mm; max. 20 kW, 380 V; machine dimensions: L1800 x W1290 x H1300 mm; weight: 750 kg. Tedpfxsv Nl T As Anpjd Please note that our new machine prices are often below standard used equipment prices. Feel free to send us an enquiry and let us know your packaging requirements. – Typically, 30–50 different new machines are available from stock for immediate delivery. For custom-built machines, we also offer very short delivery times starting from approx. 3 weeks. – All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Compact vertical packaging system for small 3-side seal sachets. The system is designed for 3 different dosing units, enabling the packaging of granulates, powders, and liquids. Changing the product type requires time-consuming retooling, which demands technical expertise. The dosing units are selected based on customer-specific product requirements, which then determine the respective specifications. PLC and 7" touchscreen by OMRON, PID temperature control by OMRON, electronic components by SCHNEIDER or OMRON, pneumatic components by AIRTAC. Self-diagnostic functions, motorized tension control, fast and uniform film transport. – Specifications: max. machine cycle rate (idle): 50 cycles/minute; bag dimensions: L(30-180)xW(10-80)mm; bag type: 3-side seal sachet; vertical seal width: 8mm; horizontal seal width: 8mm; cut type: zig-zag seam; film width: max. 180mm; suitable for laminated BOPP/PE films; film drive: servomotor; horizontal sealing unit: pneumatic; hot stamping coder: 2 lines with 10 characters each; power supply: 220V, 2.5kW; stainless steel version (SS304 - optional SS316); packaging machine dimensions: L1400xW1100xH1400mm; weight: 400kg. Please note that our new prices are often below the usual used equipment prices. Feel free to contact us and let us know your packaging requirements. – We usually have 30-50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times from approx. 3 weeks. – All machines are available with a full warranty. Todpfov Nmc Eex Anpjd

Stanje: novo, Leto izdelave: 2025, Complete version of the vertical packaging system with 4-head weighing system (2.4l/head), single vessel feeder, and discharge conveyor belt. Vertical packaging machine: MITSUBISHI PLC, WEINVIEW touchscreen control monitor, automatic program setup, mark sensor, quick-change forming unit, sealing unit with servo motor, servo motor for film transport, dual transport possible. - Specifications: Bag size: L(50-230)xW(60-190)mm (single transport); max. machine cycle rate idle: 100 cycles/minute; stainless steel; 220V/4.5kW; 6 bar, 0.2m³/min; machine dimensions: L3842xW1149xH3113mm (depending on final layout); weight: 800/900kg. Todev Nmgkepfx Anpsd Please note that our new prices are often below typical used equipment prices. Feel free to contact us and let us know your packaging requirements. - Usually, 30-50 different new machines are available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short delivery times from approximately 3 weeks. - All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Complete version of the vertical packaging system with auger dosing unit (1–300g), screw conveyor, and discharge conveyor belt. Todpfxov Nmgqe Anpsd Vertical packaging machine: Equipped with MITSUBISHI PLC, WEINVIEW touchscreen control panel, automatic program setup, marking sensor, quick-change forming unit, sealing unit with servomotor, and servomotor-driven film transport. Double transport option available. Specifications: - Bag size: L(50–230) x W(60–190) mm (single transport) - Max. machine cycle rate (idle): 100 cycles/minute - Stainless steel construction - 220V/4.5kW - 6 bar, 0.2 m³/min air supply - Machine dimensions: L2588 x W3308 x H2159 mm (dependent on final layout) - Weight: 800/900 kg Please note that our new prices are often below typical used machine prices. Feel free to contact us and describe your packaging requirements. – We usually have 30–50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times from approx. 3 weeks. – All machines are available with full warranty.