Stanje: rabljeno, skupna širina: 2.220 mm, skupna dolžina: 4.750 mm, skupna višina: 1.000 mm, - Dokumentacija na voljo: Ne - CE oznaka prisotna: Da - CE certifikat prisoten: Ne - Serijska številka: 45870403 - Število valjev [kos]: 7 - Število protitlačnih valjev [kos]: 2 - Transportne mere: 4750mm x 2220mm x 1000mm (d x š x v) - Število transportnih paketov [kos]: 1 Finančne informacije Codpjxzbtrsfx Afqsrk DDV: Navedena cena je brez DDV DDV/diferencirana obdavčitev: DDV je odbiten za podjetja Dobava in odkup možna kadarkoli za vse iz industrijskega področja Yorick Diebels

Stanje: rabljeno, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 with GLS ----- For sale on behalf of customer Technical Data Overview ----- 1. Cross-cut saw ----- Cross-cut saw pneumatic, with 8-position revolver stop Spindle speed: 2,800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor power: 3 kW Laser alignment light for saw cut detection Manual length stop 4,100 mm 1. Tenoning and slotting spindle ----- Number of tools: 3 / 4 pcs Tool clamping length: 320 mm Vertical spindle stroke, pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Max. tool diameter: 320 mm Motor power: 11 kW 1. Profiling spindle – same direction spindle (climb & counter-climb) ----- Position: vertical right Number of tools: 1 pc. Tool clamping length: 120 mm Spindle speed: 6,000 rpm Spindle diameter: 50 mm Max. tool swing diameter: 232 mm Motor power: 7.5 kW 2. Profiling spindle ----- Position: vertical right Number of tools: 3 / 4 pcs Tool clamping length: 320 mm Vertical spindle stroke, pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Max. tool swing diameter: 232 mm Motor power: 11 kW 3. Profiling spindle (fitting spindle) ----- Position: vertical right Number of tools: 3 pcs Spindle speed: 6,000 rpm Spindle diameter: 40 mm Max. tool swing diameter: 180 mm Motor power: 3 kW Clamping length: 150 mm 4. Glazing bar saw, horizontally and vertically indexed ----- Position: horizontal, top Number of tools: 1 pc. Tool clamping length: 40 mm Spindle diameter: 40 mm Motor power: 3 kW Axial indexing: 2 positions Radial indexing: 2 positions Additional Features ----- Sash rebating unit for tear-free rebating Twin workpiece package Return conveyor for single-operator handling at working height: swivel tray Screen control: 99 programs Tilting window device Electronic angle display for tilted windows INCLUDES window tooling OPPOLD, year 2013: Oppold IV 68/78/92 timber Oppold IV 68/78 timber-aluminium Sale of tools as currently equipped, as is, with existing accessories. Note on window profiles, tool drawings, and tool system lists: Crodpfx Afsxvtggeqjk Engelfried GmbH does not warrant that the actual tools correspond with the specified and illustrated systems. (Technical details as per manufacturer – no guarantee!)

Leto izdelave: 2001, Stanje: dober (rabljeno), Table diameter 200 mm Cjdpfx Afett Tb Djqerk Workpiece height 100 mm Number of wheels 1 Control unit Robot CNC Total power requirement 6 kW Machine weight approx. 1.8 t Installation dimensions approx. 1.83 x 2.04 x 2.1 m Technical Specifications - Grinding capacity: Ø 0.025–12.7 [mm] - Bar diameter: Ø 1.0–12.7 [mm] - Grinding length: W15 (optionally W20) - Z-axis: 35 [mm], resolution: 0.5 [µm] - X-axis: 25 [mm], resolution: 0.1 µm - Y-axis: 286 [mm], resolution: 0.5 µm - U-axis: 15 [mm], resolution: 0.1 µm Head motor: 0.70 [kW], rotation speed: 300–3000 [rpm] Rough grinding: 1.5 [kW] spindle, Ø 60 [mm], grinding wheel diameter: Ø 200 [mm], cutting speed: 30 m/sec. Finishing: 0.75 [kW] spindle, Ø 100 [mm], grinding wheel diameter: Ø 150 [mm], adjustable cutting speed Dimensions (L x W x H): 1830 x 2040 x 2100 mm Weight: approx. 1800 [kg] Accessories - Loading and unloading robot - Fire protection system CONTROL Axes: 4 axes + 2 programmable robot axes - Simultaneous linear interpolation of 4 axes + cylindrical interpolation of 2 robot axes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Stroj za izdelavo oken Proizvajalec: Okoma Tip: UF1 S Cedpfx Afjx At Idoqjrk Leto izdelave: 1988 z orodjem

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Ta DIMTER PROFIPRESS L2500 je bila izdelana leta 2007. Gre za robusten rabljen lepilni stiskalnik z delovno površino približno 2500 x 1300 mm in stabilnim osnovnim okvirjem. Vključuje motoriziran večnamenski potiskač in avtomatsko lepilno postajo s precizno lepilno glavo. Primeren je tako za mehek kot tudi za trd les, zagotavlja enakomerno porazdelitev pritiska in visok vertikalni pritisk za minimalni zamik. Za več informacij o stroju nas kontaktirajte. Vrste uporabe Stiskanje / Laminiranje Credpfxoxulapj Afqsk

Stanje: pripravljen za uporabo (rabljen), Leitz orodje za okna z izmenljivimi ploščicami ALT Wien 2 Csdpfx Aexq Ecvjfqork Kastenstock okno

Stanje: rabljeno, Dimensions (L x W x H): 130 x 260 x 175 cm Price: On request - Documentation available: No - CE certificate available: No - Number of spindles [qty.]: 4 - Spindle 1: - Spindle diameter [mm]: 50 - Max. planer head diameter [mm]: 120 - Spindle 2: - Motor power [kW]: 11 - Spindle diameter [mm]: 50 - Max. planer head diameter [mm]: 120 - Spindle 3: - Motor power [kW]: 11 - Spindle diameter [mm]: 50 - Max. planer head diameter [mm]: 120 - Spindle 4: - Spindle diameter [mm]: 50 - Max. planer head diameter [mm]: 120 - Max. planing width [mm]: 500 - Max. planing height [mm]: 200 - Infeed table length [mm]: 650 - Extraction nozzle diameter [mm]: 180 - Transport dimensions: 1300 mm x 2600 mm x 1750 mm (l x w x h) Codpfowniy Nsx Afqjrk - Transport packages [qty.]: 2 Financial Information: VAT: The stated price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, dolžinski omejevalnik: 4.500 mm, premer orodja: 400 mm, največja hitrost vretena: 6.000 obr/min, model krmilnika: Weinig Unicontrol 12, TECHNICAL DETAILS Cross-cut saw (electronic, horizontal, stepless adjustment) Number of tools: 1 pc. Motor power: 3.7 kW Spindle speed: 3,000–6,000 rpm Spindle diameter: 40 mm Tool diameter: max. 400 mm Axial adjustment travel: 150 mm NC axis, electronically stepless Radial adjustment travel: pneumatic, 8 positions (e.g. edge rounding from above) Rounding unit Position: horizontal, bottom Axial adjustment travel: together with cross-cut saw Electronic length stop Length: 4,500 mm 1st & 2nd tenoning and mortising spindle Spindle diameter: 50 mm Spindle speed: 2,800–4,000 rpm Motor power: 15 kW Tool diameter: 380–400 mm Tool clamping length: 640 mm, with counter bearing Axial adjustment travel: 580 mm NC axis, stepless Trailing counter (entire clamping length is counter-supported) 1st & 2nd profiling spindle Position: vertical right Spindle diameter: 50 mm Spindle speed: 6,000 rpm Codsxp U N Nepfx Afqork Motor power: 11 kW Tool clamping length: 400 mm, with counter bearing Tool cutting circle: min. 140 mm Tool cutting circle: max. 232 mm Axial adjustment travel: 350 mm NC axis, stepless Radial adjustment travel: 80 mm NC axis, stepless Profiling milling unit (grooving unit from above) Spindle diameter: 40 mm Motor power: 3.0 kW Tool clamping length: 40 mm Axial adjustment travel: 30 mm NC axis, stepless Radial adjustment travel: 125 mm NC axis, stepless Spindle speed: 9,000 rpm Tool cutting circle max.: 130 mm 4th profiling spindle Position: vertical right Number of tools: variable Motor power: 11 kW Spindle diameter: 50 mm Tool clamping length: 400 mm, with counter bearing Axial adjustment travel: 350 mm NC axis, stepless Radial adjustment travel: 80 mm NC axis, stepless Spindle speed: 6,000 rpm Tool cutting circle min.: 140 mm Tool cutting circle max.: 232 mm 5th profiling milling unit (fitting spindle) Position: vertical right Motor power: 3.0 kW Spindle diameter: 40 mm Tool clamping length: 160 mm Axial adjustment travel: 115 mm NC axis, stepless Radial adjustment travel: 100 mm NC axis, stepless Spindle speed: 5,850 rpm Tool cutting circle max.: 210 mm 6th profiling milling unit (grooving unit from above), in auxiliary stand Position: vertical, working from above on the right Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 40 mm Axial adjustment travel: 100 mm, 8 positions via pneumatic turret Radial adjustment travel: 80 mm, 8 positions via pneumatic turret Spindle speed: 5,850 rpm Tool cutting circle max.: 180 mm 7th profiling spindle (grooving unit from below) in auxiliary stand Position: horizontal bottom Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 125 mm Axial adjustment travel: 100 mm NC axis, stepless Radial adjustment travel: 100 mm NC axis, stepless Spindle speed: 5,850 rpm Tool cutting circle max.: 200 mm MACHINE DETAILS Mortising spindle: 2 pcs. Number of milling units: 7 pcs. Control: Weinig PC-Nexus, Weinig Unicontrol 12 INCLUSIVE: used window tooling OERTLI IV 68, IV 78 for wood and wood-aluminum Further equipment details can be found in the attached document! Note: The machine has already been professionally dismantled.

Stanje: zelo dobro (rabljeno), Window production line WEINIG Unicontrol 6, S/N 035-839, year 1997 Cross-cut saw, pneumatically indexed (3 kW) with laser alignment light Slotting spindle 50 x 320 mm for 4 tools at 80 mm each – 11 kW motor Parallel spindle 50 x 120 mm – 7.5 kW motor Longitudinal profiling spindle 50 x 320 mm for 4 tools at 80 mm each – 11 kW motor Hardware spindle, pneumatically indexed, 40 x 160 mm – 3 kW motor Saw / grooving spindle horizontal, top, pneumatically indexed – 3 kW motor Feed speed adjustable from 6–12 m/min – 1.1 kW motor Display control system for up to 99 window types Support rail for muntin production, pneumatically indexed Studio window device with digital angle display Electronic length stop POSITIOMAT with digital length measurement up to 3300 mm Cedpfx Aexx S Twofqjrk Peripheral milling device with long support rail and glide belt Transport system with return conveyor to operator at working height Plant complete with operating manuals, wiring diagrams, spare parts lists Tool set LEITZ, IV-66 (including type-round arch tool) Tool set GOLD, IV-78 Tool set GOLD, IV-90 THE LINE IS IN VERY GOOD TECHNICAL AND VISUAL CONDITION

Stanje: rabljeno, Sponka Gamal Antine z nakladalnim drogovjem Codpsq Rktysfx Afqork

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, WEINIG Unicontrol UC 10-5 Window Production Machine 1. Electronically controlled cross-cut saw with laser switching from saw cutting to zero-clearance wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for tools 6 x 80 mm, 15 kW motor 3. Longitudinal/profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 4. Grooving spindle (between 1st and 2nd elevating spindle) D = 40 x 40 mm, axially indexed, 3 kW motor Cedpfxexmr N Ij Afqork 5. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 6. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and slotting spindle on the right side, 3 kW motor Fitting spindle 40 x 150 mm, 3 kW motor Adjustable feed rate 6-12 m/min, 1.1 kW motor 4-position counter changer Electronic length stop 3600 mm Return of workpiece via automatic rotary system Automation package Interval-controlled sash support Double parts package Laminated fabric worktables (for sanded surfaces) Left-side pressure guide, max. wood width difference 100 mm Machine in very good technical and visual condition

Stanje: rabljeno, Milling unit GUBISCH Spindle diameter: 40 mm Tool clamping length: 240 mm Crjdpfsq E Iu Dsx Afqok Total tool spindle length: 300 mm >> Very good and robust steel construction

Stanje: rabljeno, Leto izdelave: 2006, Štiri-stranski skobeljni stroj Kleine Kuper SWT 23 XL-6 Leto izdelave: 2006 Min./max. delovna višina: 8/125 mm Min./max. delovna širina: 18/230 mm Delovna hitrost: 6/28 m/min Hitrost vretena: 6000 obr/min Premer vretena: 40 mm Motorji 1. vreteno – spodaj: 5,5 kW 2. vreteno – desno: 5,5 kW 3. vreteno – levo: 7,5 kW 4. vreteno – zgoraj: 11 kW 5. vreteno: 7,5 kW 6. vreteno – spodaj: 7,5 kW Glavna varovalka: 105 A Dimenzije: 7.500 x 2.000 x 1.850 mm (D x Š x V), teža: 4.000 kg - Leto izdelave: 2006 - Dokumentacija na voljo: ne - CE certifikat: ne Finančne informacije DDV: navedena cena je brez DDV DDV/obračun razlike: DDV odbiten za podjetnike Dostava in odkup industrijskih strojev možen kadarkoli Cedpfx Aexyvzuefqjrk Yorick Diebels

Stanje: rabljeno, Grooving spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm # 2809 Weinig Unicontrol 6 Technical Data Summary (Please inquire for additionally included accessories) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for saw cut detection Length stop CNC-controlled ----- > Length: 3,500 mm > Electronic length stop including positioned cross-cut saw Item 2: Tenoning and grooving spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle vertical stroke pneumatic: 240 mm for timber thicknesses 68 - 92 mm > Spindle speed: 3,000 rpm > Max. cutting circle: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb and counter-rotating) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. cutting circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle vertical stroke pneumatic: 240 mm for timber thicknesses 68 - 92 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. cutting circle: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the machining of narrow, short parts (e.g. glazing bar components) Glazing bar guide consisting of: Glazing bar support rail from above in the area of the vertical right profiling unit and profiling spindle. Cjdpfx Aextvgksfqsrk Item 5: Horizontal top profiling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. cutting circle: 130 mm > Axial adjustment: 30 mm, 2 positions > Radial adjustment: 125 mm, 4 positions, manual Item 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions via pneumatic turret > Radial adjustment: 110 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. cutting circle: 210 mm > Motor power: 3.0 kW Additional Features ----- > Electric feed height adjustment incl. mechanical digital display and manual feed beam clamping > Sash forming device for tear-free sashes > Double-piece package > Return conveyor for single-operator use: swing belt > Screen control > Angle sash window device > Electronic angle display for sash windows > Industrial PC with Windows PC control/NEXUS Extraction port diameters: ----- Cross-cut saw: 80 mm Grooving spindle: 140 mm Profiling spindle 1: 140 mm Profiling spindle 2: 140 mm Grooving device from...

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Unicontrol 12 Csdpfx Afjumci Sjqerk Includes: Cross-cutting unit (Pos. A), Tenon and slot spindle (Pos. C), Transfer belt (Pos. I), Profiling spindle (Pos. L), Profiling spindle (Pos. N), Vertical profiling unit right (Pos. P) For the production of individual parts and elements in frame-based or serial manufacturing processes. Consists of a cross-processing unit and a longitudinal processing unit, connected by a transfer belt. Working width: 40–140 mm (see pressure guide left 40–140 mm) Working height: 40–120 mm Workpiece length min.: approx. 275 mm + 1 x end profile length Longitudinal processing: approx. 220 mm + 2 x end profile length Workpiece length max.: 3500 mm Workpiece dimensions are dependent on machine configuration, manufacturing method, and tool assignment. Final definition of the part dimensions is only possible after receipt, review, and approval of the complete and finalized tool layout drawings. Cross-machining: Table feed motor power: 0.3 kW (0.4 HP) Pre-set feed speed during cutting, profiling, and return: 3–25 m/min Vario table with (studio window production possible) The clamping length of all tenon and slot spindles can be used without tool changeover slots. Workpiece clamping by means of a clamping bridge. Operated by clamping cylinders mounted under the table. Length stop NC controlled, mounted on the slotting table. Studio window device swivel angle max.: +/- 75° The minimum workpiece length for angled windows depends on the angle and the wood width. Possible part dimensions when manufacturing angled windows: Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60°, only counter-processing is possible. Commission not documented. 1) NC angle adjustment automatic for angled part processing Tear-out protection via follow-up counter over the complete spindle length of the tenon and slot spindle for 90°processing. Manually adjustable counter wood strip for angled part processing. 2) Additional counter woods

Stanje: rabljeno, Leto izdelave: 2002, Dimensions (L x W x H): 355 x 125 x 173 cm Csdpfxoxykrzj Afqork Price: On request - Year of manufacture: 2002 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 95140 - Number of spindles [pcs.]: 4 - └ Spindle 1: - Spindle diameter [mm]: 40 - Planer shaft speed [rpm]: 6000 - └ Spindle 2: - Spindle diameter [mm]: 40 - Planer shaft speed [rpm]: 6000 - └ Spindle 3: - Spindle diameter [mm]: 40 - Planer shaft speed [rpm]: 6000 - └ Spindle 4: - Spindle diameter [mm]: 40 - Planer shaft speed [rpm]: 6000 - Min. planing width [mm]: 13 - Max. planing width [mm]: 230 - Min. planing height [mm]: 6 - Max. planing height [mm]: 120 - Infeed table length [mm]: 2000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 1.5 - Transport dimensions: 3550mm x 1250mm x 1730mm (l x w x h) - Number of transport packages: 1 Financial Information VAT: The stated price is net plus VAT VAT/margin taxation: VAT is deductible for commercial customers Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2023, Fitting Storage Rack Working Width, mm Swiveling Ruchser final assembly line for windows and doors in wood and wood-aluminum ----- Current new price approx. €270,000. System is dismantled and in storage. Comprising the following components: ----- Pos. 1 Ruchser RU-FKW1600/50-110 with accessories, sash commission trolleys, 11 units Pos. 2 Ruchser RU-KW-2000S, single-sided commission trolleys, 4 units Pos. 3 Ruchser RU-RFW-SB200, frame and leaf compartment wagons, 3 units Pos. 4 Ruchser RU-MKS-1.4 with accessories, assembly tilting table, 1 unit Cjdpfx Aexpn T Isfqerk Pos. 6 Ruchser RU-DH-F4 double reel trolley for 4 sealing rolls, 1 unit Pos. 7 Ruchser RU-CBM 3000 work table, 1 unit Sash fitting center RU-BM 3000 with LED pick-by-light system RU-SBL3600/40 free-standing fitting storage rack RU-CSA-SMB aluminum holder screwing machine with automatic screw feed and manual feed for aluminum holders Pos. 8 Ruchser RU-FLW-H-100/16 sash storage trolley, 1 unit Pos. 9 Ruchser RU-ARFW-S, wood-aluminum frame compartment trolley, 1 unit Pos. 10 Ruchser RU-MKS-1.4 with accessories, assembly tilting table with rotary device, 1 unit Pos. 11 RU-RBA gravity roller conveyor right, without system part, lowerable via foot pedal Pos. 12 Ruchser RU-RFH-1500/140R/2800 frame compartment wagon, with accessories, 1 unit Pos. 13 Ruchser RU-S2H assembly lift station with accessories, 1 unit Pos. 14 Ruchser RU-VGP4-WL glazing and inspection press with 90-degree left rotation unit, with accessories, 1 unit Pos. 20 Ruchser RU-MK-HS-2.8-7 assembly tilting table for lift-and-slide doors with accessories, 1 unit Pos. 22 Ruchser RU-RSG/90 one pair of roller stands for transport of large elements, 1 unit Pos. 25 Crane system 18 x 8 m, 1 unit Pos. 26 Double support stands for suspending crane systems, 4 units Transport of large elements Pos. 27 Electric chain hoist, 1 unit Pos. 28 Ruchser RU-VG2-PD-200 glazing suspension, 2 units Pos. 29 Crane system 12 x 8 m, 1 unit Pos. 30 Double support stands for suspending crane systems, 3 units Pos. 31 Electric chain hoist, 1 unit Pos. 32 Ruchser RU-VG2-PD-300 glazing suspension with accessories, 1 unit Detailed description of individual items attached. More information upon request! All information as provided by the manufacturer, without guarantee! Errors excepted.

Stanje: rabljeno, Leto izdelave: 1996, BMH štiristranski skobeljni stroj Z vsemi dovodnimi in odvodnimi trakovi - Leto izdelave: 1996 - Dokumentacija na voljo: Ne - CE označba prisotna: Da - CE certifikat na voljo: Ne - Serijska številka: 95777 - Napetost [V]: 380 - Moč [kW]: 48,0 Finančne informacije DDV: Naveden cena je brez DDV DDV/obdavčitev razlike: DDV je odbiten za podjetja Dostava in prevzem v račun sta možna kadarkoli za vse iz industrijskega področja Crodpfswniqbjx Afqek Yorick Diebels

Stanje: rabljeno, Working width: 230 mm Working height: 15–120 mm Number of spindles: 2 pcs. Weinig Hydro Planer Type Uniplan 23 ----- Machine factory-refurbished by Weinig in 2024. Description: For double-sided horizontal wood processing with 2 working spindles. Spindle arrangement: horizontal, bottom and top. Both horizontal spindles are equipped with hydraulically tensioned counter-bearings without axial adjustment. Integrated straight jointers on both spindles with automatic stone feed, remotely operable with closed hood. Machine with continuous, chainless feed system equipped with rubber rollers. Electric height adjustment of spindles according to mechanical digital display (SIKO). Limit switch for height adjustment. Feed roller pressure pneumatic. Stops and table plates non-adjustable. Machine with steel table plates. Machine fully enclosed with integrated sound and dust protection, including internal lighting. Electrical execution according to DIN VDE 0113, electrical equipment for industrial machines EN 60204, IEC - 204 - 1. No other electrical regulations considered. Machine includes operating tools, but no processing tools. The spindles of the Weinig Uniplan operate at a speed of 7,200 revolutions per minute. Please check before using existing tools whether they are suitable for this speed. Please also take this into account when ordering new tools. Technical specifications: Working width max.: 230 mm Working height min.: 15 mm, max.: 120 mm Feed motor: 3 kW (4 HP) Each horizontal spindle: 7.5 kW (7.5 HP) Feed speed, stepless: 6–36 m/min Spindle speed: 7,200 rpm Cjdpfsxpn Tzex Afqork Spindle diameter: 50 mm Tool clamping length: 240 mm Max. tool diameter: 163 mm Fixed clamping offset below: 0.5 mm (Technical data according to manufacturer – subject to change!)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 107402, premer vretena: 40 mm, število vreten: 4, Oprema: CE označba, TEHNIČNE PODROBNOSTI Število vreten: 4 kos Premer vretena: 40 mm Dolžina vstopne mize: 1.780 mm PODROBNOSTI STROJA Dimenzije (D x Š x V): 2170 x 4600 x 1830 mm Motor za podajanje: 5,2 kW Pogon podajanja: kardan pogon Premer sesalne šobe: 140 mm Napetost: 400 V Credpfexw R Rlox Afqek OPREMA Oznaka CE Opomba: Ležaji stroja so v slabem stanju.

Stanje: rabljeno, Tenoning spindle 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC controlled radially and axially ---- The machine was factory-refurbished by Weinig in 2024. As part of this, the control system was replaced with a Siemens S7 677 C, including a new “Touch” membrane panel. With the following machining units: Crosscut saw ---- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatic, 8 positions for top edge rounding Bottom-mounted unit for edge rounding ---- axial adjustment shared with crosscut saw Haunching and tenoning spindle ---- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm min. tool cutting circle 380 mm, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial traverse path 580 mm Crsdpfjxpi Dujx Afqjk adjustment speed 100 mm/sec. 1st profile spindle (climb and conventional milling) ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd profile spindle ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit, top ---- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment in 8 axial and radial positions Vertical profile milling unit, right, at machine outfeed ---- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment in 8 axial and radial positions Additional accessories ---- CNC-controlled length stop, mounted on the tenoning table for lengths up to 3,500 mm, including crosscut saw integrated into the control system. Studio window facility, swivelling ±60° Double workpiece package with automatic separation and transfer Climb milling facility with window automation for rabbetting Rabbetting carriage for small sash widths Climate control unit in electrical cabinet PC control NEXUS Automatic turning system Lamella conveyor including return belt for return of workpieces to the operator (specifications as per manufacturer's information – subject to confirmation).

Stanje: novo, Staple length, mm Staple width (ridge width), mm Impact energy, Nm Painting aid for simultaneous coating of sash and glazing bead frame RU-LH Painting aid for glazing bead frames For processing staples L=50mm Length 700 mm, width 500 mm, working height adjustable from 700 - 1200 mm. At each of the 4 corners of the glazing bead frame, one staple is set. Positioning is done diagonally so that the staples protrude approx. 35 mm from the wood. When pressed into the sash frame, a clamping effect is achieved. For painting, the glazing bead frame is positioned with approx. 20 mm clearance in front of the sash. After drying or before sash installation, the glazing bead frame is pressed flush into the sash and removed again only before glazing. The staples can then be manually pulled out. Stand frame with support table, vertically adjustable to 85°, inclination adjustable. 2 spacer frames for different glazing bead thicknesses, operation via foot pedal. Price on request plus packaging and shipping Option at extra cost: Box of 26 x 50 mm staples, 4,300 pcs per box EUR 74.00 Credjxpi Efepfx Afqek You can find recordings of the painting aid at the end of the adjacent video! (Technical specifications as per manufacturer – subject to change and without guarantee!)

Stanje: rabljeno, Leto izdelave: 1998, Slotting spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 GUBISCH – CENTROMAT CW 2 For sale on behalf of customer, ex-warehouse ----- Manufacturer's description: ----- For production of windows and doors, with 50 mm spindle diameter for longitudinal profiling. Crodpew I Eawefx Afqok Equipped with the following processing stations and capabilities: - Single-sided slotting unit for straight and angled joints; milling unit for longitudinal profiling - Rebating operation with climb milling unit and automatic plunge mechanism - Swiveling frame support up to 650 mm - Central control panel 1.0 Automatic crosscut saw with top-entry plunge action ----- Motor power incl. motor brake: 3.0 kW Spindle speed: 2,800 rpm Tool diameter: 350 mm Spindle diameter: 30 mm Clamping flange, 1 driver 6 mm, TK 42, 120 mm diameter Vertical pneumatic stroke: 100 mm Horizontal pneumatic stroke: 160 mm Against 2 manually adjustable 6-position turret stops Chip extraction hood with 100 mm diameter extraction nozzle 2.0 Slotting unit ----- Motor power incl. motor brake: 9.2 kW Spindle speed: 3,800 rpm Tool diameter: 320 mm Spindle diameter: 50 mm Usable spindle length: 320 mm Vertical pneumatic fixed stroke: 2 x 100 mm Suitable for 3 tool sets of 100 mm each Zero height: 10 mm Chip extraction hood with 160 mm extraction nozzle 3.0 Slotting table ----- Table height above floor: 920 mm Feed with 4 continuously adjustable speeds: - 1. Milling, angled window, and tip speed adjustable at control panel (approx. 7 m/min) - 2. Sawing speed: approx. 7 m/min (set on machine) - 3. Transfer speed: approx. 10 m/min (set on machine) - 4. Return speed/no machining: approx. 25 m/min (set on machine) - Motor power including brake: 0.37 kW Workpiece clamping: pneumatic, pendulum pressure shoes Workpiece clamping: pneumatic 1 clamping cylinder with 2 additional pressure shoes 3.1 Counter rail device: Counter rail changer with 2-way automatic changeover and, after manual 180° rotation, 2 further counter profiles possible, which can also be processed automatically 3.2 Length stop ----- - Stop system with 3 scales for a) Outer frame outside b) Sash outside vertically c) Sash outside horizontally - Manual adjustment - Length with attachable extension 3000 mm - Swivelable for angled windows +/- 60 degrees 3.3 Angle transfer - automatic via vertically indexed feed roller in milling feed 4.0 Milling unit for longitudinal profiling and rebating of windows/doors equipped with the following units: ----- 4.1 First profile milling unit ----- - Conventional (opposing) milling - Climb milling with automatic plunge for rebating - Motor power incl. brake: 9.2 kW - Spindle speed: 6,000 rpm - Tool diameter: max. 240 mm - Spindles adjustable for zero diameter: max. 140 mm min. 112 mm (tools) - Zero height: 10 mm - Spindle diameter: 50 mm - Usable spindle length: 320 mm - Vertical pneumatic stroke (fixed) - Suitable for up to 4 sets of tools (each 80 mm, or 3 x 80 mm) - Horizontal pneumatic stroke: 80 mm - Chip extraction with extraction ...

Stanje: rabljeno, Prečna žaga 1,85 kW Premer vretena: 40 mm Dolžina vretena: 130 mm Moč glavnega pogona: 4,4 kW Stroj za utore Festo ZA-101 ----- s prečno žago 1 vreteno za utore ZA dolžinska omejitev 1850 mm, LAS drsnik za omejitev Za prodajo po naročilu stranke v OBSTOJEČEM STANJU! Crjdexmk D Djpfx Afqsk

Stanje: novo, Working length 2750 mm Working height 2500 mm Table lift range 300–1000 mm RUCHSER Glazing and Sealing Table RU-SW3-90° ----- Vertical worktable with lifting device and tilt mechanism. Particularly suitable for glazing and double-sided sealing of wooden windows. Features: Cedpfx Aexmk D Rjfqerk - Support surface covered with felt - Infinitely adjustable pneumatic lifting mechanism, lift from 300 mm to 1000 mm, referenced to roller conveyor height - Tilt mechanism for double-sided sealing, with roller conveyor, 150 mm roller length - 2 pneumatic clamps to secure the window in the tilt mechanism - Design with special tilt mechanism allowing the window positioned on the roller conveyor to be pushed through while the tilt mechanism is engaged (closed) Alternative/optional equipment available on request! Item 1.0: Art. no.: 100000 RU-SW3-90° vertical worktable for wooden windows with tilt mechanism for glazing and double-sided sealing Angle length 1970 mm, opening angle 90°, max. working width 2750 mm, total length 3050 mm, total width 780 mm, support height 1600 mm, support surface covered with felt. On the left OR right side one roller as edge protection for elements up to 2500 mm height. Pneumatic lifting device from 300–1000 mm. Setup area as roller conveyor with steel rollers, roller length and roller spacing 200 mm. ----- Total price for this configuration: on request! ----- Options (at extra charge): Item 1.1: Art. no.: 5202 EUR 710.00/each Support section with rubber rollers, Ø 48 mm, roller spacing 50 mm, for RU-SW3-90° and RU-SWS3 Item 1.2: Art. no.: 7081 EUR 404.00/each Steel angle covered with felt, mounted above the roller bars for RU-SW3-90° These prevent windows from 'rattling' when pushed. The additional bars are mounted above all roller bars of the RU-S2. Item 1.3: Art. no.: 5056 EUR 129.00/each RU-AK-6 storage box 1000x120 mm, 6 compartments, for hanging onto the roller conveyor ----- Total price for this configuration: on request! Ex works plus packaging and shipping, plus statutory VAT. PDF brochure attached. (Technical specifications as per manufacturer – without guarantee!)